Arthur Cantarel

Maître de conférence - Institut Universitaire de Technologie de Tarbes (IUT de Tarbes)
Membre du groupe Matériaux et Structures Composites (MSC)
IUT, 1 rue Lautréamont
65016 Tarbes
 
    (recherche)

Production scientifique :
25 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2018ACLMatthias Barus, Hélène Welemane, Valérie Nassiet, Marie-Laetitia Pastor, Arthur Cantarel, Francis Collombet, Laurent Crouzeix, Yves-Henri Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography. NDT and E International, Elsevier, 157-163, 93[hal][bib] [doi]
2018ACLCéline Vicard, Olivier De Almeida, Arthur Cantarel, Gérard Bernhart. Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'epsilon-caprolactame. Revue des composites et des matériaux avancés, Lavoisier, p.89-110, 28[hal][bib]
2017ACLCéline Vicard, Olivier De Almeida, Arthur Cantarel, Gérard Bernhart. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam. Polymer, Elsevier, p.88 - 97, 132[hal][bib] [doi]
2017COMCéline Vicard, Olivier De Almeida, Arthur Cantarel, Gérard Bernhart. TTT diagram of the anionic polymerization PA6 from ε-Caprolactam [epsilon-caprolactam]. ICCM 21 - 21th International Conference on Composite Materials, 10 p.[hal][bib]
2017ACLM. -Q. Thai, F. Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front. International Journal of Material Forming, Springer Verlag, p. 567-580, 10[hal][bib] [doi]
2017COMCéline Vicard, Olivier De Almeida, Arthur Cantarel, Gérard Bernhart. Diagrammes TTT de la polymérisation anionique du PA6 à partir de l'ε-caprolactame et influence des fibres sur les cinétiques. Journées Nationales sur les Composites 2017[hal][bib]
2017COMShahriar Bakrani Balani, France Chabert, Valérie Nassiet, Arthur Cantarel, Christian Garnier. Toward improvement of the properties of parts manufactured by FFF ( Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon. ESAFORM 2017, pp. 040008[hal][bib]
2017ACLMatthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Laurent Crouzeix, Yves-Henri Grunevald, Valérie Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography. NDT and E International, Elsevier, 27-33, 85[hal][bib] [doi]
2017ACLJohn Susainathan, Florent Eyma, Emmanuel De Luycker, Arthur Cantarel, Bruno Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures.. Composite Structures, Elsevier, 487-504, 182[hal][bib] [doi]
2016COMMatthias Barus, Hélène Welemane, Francis Collombet, Marie-Laetitia Pastor, Arthur Cantarel, Valérie Nassiet, Laurent Crouzeix, Yves-Henri Grunevald. A New NDT Method for the study of composite bonded repair. 17th European Conference on Composite Materials (ECCM17)[hal][bib]
2016ACLVictor Munoz, Benjamin Vales, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography. Composites Part B: Engineering, Elsevier, 68-75, 85[hal][bib] [doi]
2016ACLBenjamin Vales, Victor Munoz Cuartas, Hélène Welemane, Marie-Laetitia Pastor, Baptiste Trajin, Marianne Perrin, Arthur Cantarel, Moussa Karama. Heat source estimation in anisotropic materials. Composite Structures, Elsevier, 287-296, 136[hal][bib] [doi]
2015COMMatthias Barus, Francis Collombet, Hélène Welemane, Laurent Crouzeix, Arthur Cantarel, Yves-Henri Grunevald, Valérie Nassiet, Marie-Laetitia Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials. 20th International Conference on Composite Materials[hal][bib]
2015ACLVictor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization. Advances in Aircraft and Spacecraft Science, Techno-Press, pp. 249-260, vol. 2[hal][bib] [doi]
2014COMVictor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy. VIIIèmes Journées d'Etudes Techniques - International congress for applied mechanics JET 2014[hal][bib]
2014COMVictor Munoz Cuartas, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Identification of the elastic properties in CFRP composites. International Symposium on Aircraft Materials ACMA 2014, pp. 61-62[hal][bib]
2013ACLVictor Munoz, Marianne Perrin, Marie-Laetitia Pastor, Hélène Welemane, Arthur Cantarel, Moussa Karama. Application of non destructive testing to the detection of aeronautical defects in composite structure. Nonconventional Technologies Review[hal][bib]
2013ACLRenaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes. Polymer Composites, Wiley, 1235-1244, 34[hal][bib] [doi]
2011ACLRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method. Applied Mechanics and Materials, Trans Tech Publications, p.57-65, 62[hal][bib] [doi]
2010COMRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method. ACMA 2010 -International symposium on composites and aircraft materials, 8 p.[hal][bib]
2010COMRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method. ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p.[hal][bib]
2010ACLR. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, F. Schmidt. Numerical simulation of resin transfer molding using BEM and level set method. International Journal of Material Forming, Springer Verlag, 635-638, 3[hal][bib] [doi]
2010ACLR. Gantois, Arthur Cantarel, Jean-Noël Felices, N. Pirc, F. Schmidt. BEM Simulation Of 3D Updated Resin Front For LCM Processes. Key Engineering Materials, Trans Tech Publications, 131-136, 446[hal][bib] [doi]
2009COMRenaud Gantois, Arthur Cantarel, Jean-Noël Felices, Nicolas Pirc, Fabrice Schmidt. BEM simulation of 3D updated resin front for LCM processes. ICSAAM 2009 -International Conference on Structural Analysis of Advanced Materials, 7 p.[hal][bib]
2009ACLArthur Cantarel, Eric Lacoste, Corine Arvieu, Olivier Mantaux, Michel Danis. Numerical simulation of segregation phenomena coupled with phase change and fluid flow : application to metal matrix composites processing. Numerical Heat Transfer Applications, 880-892, 55[hal][bib] [doi]