Bruno Castanié

Professeur - Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Membre du groupe Matériaux et Structures Composites (MSC)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
Activités de recherche :

COMPORTEMENT DES STRUCTURES COMPOSITES :

  • Structures sandwichs : analyse non linéaire, impact, inserts.
  • Jonctions des structures stratifiées : Z-Pinning, Ruptures en offset, Pull-Through, Open hole, Bearing.
  • Structures raidies : décollement de raidisseur, calculs intensifs en postflambement.
  • Couplages amortissants dans les poutres composites.
  • Structures bois/composites

ESSAIS STRUCTURAUX SOUS SOLLICITATIONS COMPLEXES :

  • Coordinateur ANR VERTEX Acceptée en 2012. Début 01/01/2013.

USINAGE/FABRICATION

  • Analyse du lien paramètre de fabrication/tenue mécanique en LRI
  • Influence des défauts de surface sur la tenue mécanique des composites percés.

Thèses réalisées en collaboration avec Airbus, Airbus Group Innovation, Airbus Helicopter, DGA, Dassault Aviation.

 



Activités d'enseignement :

Cours de Structures Composites 5A INSA, M2R, IPST CNAM, ISAE, Master Composite Albi

Cours D’éléments finis non linéaires et Abaqus

 



Responsabilités collectives :

Responsable du M2 Recherche Génie Mécanique adossé à  l’Institut Clément Ader, l’IMFT, le CEMES et le LGP Tarbes



Activités administratives de soutien à la recherche :

 

Responsable du groupe Materiaux et Structures Composites de l’Institut Clément Ader



Autre :

Membre des comités scientifiques de International Conférence on Composite Structures 16 et 17 et International Conférence on Sandwich Structures 10, ICLMSM, CSMA Giens 2017

Membre Editorial Board COMPOSITE STRUCTURES (Editor in Chief : A.J.M Ferreira)

Contributing Editor of Mechanics of Advanced Materials and Structures Journal (Editor in Chief : Erasmo Carrera)

International Editor Journal of Engineering and Technology  (Open acess journal founded by Malaysian Technical Universities Network (MTUN))

 

 

 



Production scientifique :
137 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019ACLJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Christophe Bouvet, Bruno Castanié. Experimental investigation of compression and compression after impact of wood-based sandwich structures. Composite Structures, Elsevier, 220, p.236-249[HAL] / [BIB] / [DOI]
2019ACLFlorian Neveu, Bruno Castanié, Philippe Olivier. The GAP methodology: A new way to design composite structures. Materials & Design, 172, p.107755[HAL] / [BIB] / [DOI]
2019ACLMiora Ramanakoto, Tahiana Ramananantoandro, Florent Eyma, Bruno Castanié. Visuo-tactile and topographic characterizations of finished wood surface quality by French consumers and industrials: acceptability thresholds for raised grain. Annals of Forest Science, Springer Verlag/EDP Sciences, 76(1)[HAL] / [BIB] / [DOI]
2019ACLJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Numerical modeling of impact on wood-based sandwich structures. Mechanics of Advanced Materials and Structures, Taylor & Francis[HAL] / [BIB] / [DOI]
2019COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Insert sizing of sandwich panels by means of a failure mode map. MECHCOMP 5 International Conference on Mechanics of Composites 5, Lisboa, 1 - 4 July 2019, Lisboa, PT[HAL] / [BIB]
2019ACLLaurent Mezeix, Simon Dols, Christophe Bouvet, Bruno Castanié, Jean-Paul Giavarini, Natthawat Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures. Journal of Sandwich Structures and Materials, SAGE Publications, 21(1), p.135-153[HAL] / [BIB] / [DOI]
2019COMLaure Moretti, Bruno Castanié, Gérard Bernhart, Léonard Serrano, Philippe Olivier. Mise en place d'un outil de simulation des déformations induites lors du co-collage de pièces composites en autoclave. JNC 21 : Journées Nationales sur les Composites 2019, 10 p., Bordeaux, FR[HAL] / [BIB]
2018COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Shear nonlinear behavior of the Nomex honeycomb core. 12th International Conference on Sandwich Structures (ICSS-12), Lausanne, CH[HAL] / [BIB]
2018COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Virtual testing of metallic inserts for sandwich structures. 18th European Conference on Composite Materials (ECCM 18), Athens, GR[HAL] / [BIB]
2018ASCLBruno Castanié. An aeronautics and space-oriented research group. JEC Composites Magazine, JEC Group, p.41-47[HAL] / [BIB]
2018COMMiora Ramanakoto, Florent Eyma, Tahiana Ramananantoandro, Jeremy Geisler, Bruno Castanié. Caractéristiques des surfaces du bois poncé pour une finition performante et durable. MUGV & Manuf'21, Bordeaux, FR[HAL] / [BIB]
2018COMJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. WOOD-BASED COMPOSITE SANDWICH STRUCTURES. ECCM18 - 18th European Conference on Composite Materials, p.24 - 28, Athènes, GR[HAL] / [BIB]
2018COMJuan de Dios Rodriguez, Bruno Castanié, Christophe Bouvet. Continuum Damage Modeling of Shear Postbuckling in Honeycomb Core. ICMAMS 2018 First International Conference on Mechanics of Advanced Materials and Structures, Torino, IT[HAL] / [BIB]
2018ACLJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing. Composite Structures, Elsevier, vol. 193, pp. 121-139[HAL] / [BIB] / [DOI]
2018ACLJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Damage Mechanics Modelling of the shear nonlinear behavior of Nomex honeycomb core. Application to sandwich beams. Mechanics of Advanced Materials and Structures, Taylor & Francis[HAL] / [BIB] / [DOI]
2018ACLJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation of impact behavior of wood-based sandwich structures. Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 109, pp. 10-19[HAL] / [BIB] / [DOI]
2018COMLaure Moretti, Gilles Dusserre, Bruno Castanié, Philippe Olivier. Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens. ECCM18 - 18th European Conference on Composite Materials, 8 p., Athènes, GR[HAL] / [BIB]
2017ACLJoël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading. Composite Structures, Elsevier, 181, p.145-157[HAL] / [BIB] / [DOI]
2017COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Analysis of nonlinear behavior on honeycomb cores. 21st International Conference on Composite Materials ( ICCM 21 ), Xi’an, CN[HAL] / [BIB]
2017ACLAlex Kosgodagan, Oswaldo Morales-Nápoles, Thomas Yeung, Wim Courage, Johan Maljaars, Bruno Castanié. A 2-dimension dynamic Bayesian network for large-scale degradation modelling with an application to a bridges network. Computer-Aided Civil and Infrastructure Engineering, Wiley[HAL] / [BIB] / [DOI]
2017COMJoel Serra, Jean-Emmanuel Pierré, Jean-Noël Périé, Jean-Charles Passieux, Christophe Bouvet, Bruno Castanié. Modélisation d'essais structuraux sur plaques entaillées. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMFlorian Neveu, Bruno Castanié, Philippe Olivier. Nouvelle méthodologie de conception pour les structures composites. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJoel Serra, Jean-Emmanuel Pierré, Jean-Noël Périé, Jean-Charles Passieux, Christophe Bouvet, Bruno Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. 13e colloque national en calcul des structures, Giens, Var, FR[HAL] / [BIB]
2017COMJoel Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Etude expérimentale et numérique de la propagation de coupure dans des stratifiés composites soumis à de la traction simple. 13e colloque national en calcul des structures, Giens, Var, FR[HAL] / [BIB]
2017ACLCyril Sola, Bruno Castanié, Laurent Michel, Frederic Lachaud, Arnaud Delabie, Emmanuel Mermoz. Bearing fatigue of composite laminates: Damage monitoring and fatigue life prediction. Composites Part B: Engineering, Elsevier, 110, p.487-496[HAL] / [BIB] / [DOI]
2017INVBruno Castanié. Discrete modeling strategies for aeronautic composite structures: from failure scenario to certification. International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017, Paris, FR[HAL] / [BIB]
2017COMM. Ramanakoto, Florent Eyma, T. Ramananantoandro, J. Geisler, Bruno Castanié. Finishing of wood machined surfaces. Which characteristics for which performance?. 23rd International Wood Machining Seminar, Québec, CA[HAL] / [BIB]
2017COMJ. Serra, Christophe Bouvet, Bruno Castanié, C. Petiot. DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, Xi'an, CN[HAL] / [BIB]
2017COMJ. Serra, J.-E. Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié, C. Petiot. The VERTEX program: complex loading and validation of aeronautic composite structures. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, Xi'an, CN[HAL] / [BIB]
2017COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Shear testing of honeycomb cores for inserts. International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017, Paris, FR[HAL] / [BIB]
2017COMFlorian Neveu, Bruno Castanié, Philippe Olivier. A NEW PRE-DESIGN METHODOLOGY FOR INNOVATIVE COMPOSITE STRUCTURES. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, Xi'an, CN[HAL] / [BIB]
2017ACLM. Fiorina, A. Seman, Bruno Castanié, K. M. Ali, C. Schwob, L. Mezeix. Spring-in prediction for carbon/epoxy aerospace composite structure. Composite Structures, Elsevier, 168, p.739--745[HAL] / [BIB]
2017ACLJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures.. Composite Structures, Elsevier, 182, p.487-504[HAL] / [BIB] / [DOI]
2017ACLJoël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 2: Load envelopes for the assessment of panels with large notches. Composite Structures, Elsevier, 180, p.550-567[HAL] / [BIB] / [DOI]
2017ACLJoël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures. Composite Structures, Elsevier, 179, p.224-244[HAL] / [BIB] / [DOI]
2016COMJuan de Dios Rodriguez-Ramirez, Christophe Bouvet, Bruno Castanié, Mathieu Deloubes, Jean-Paul Giavarini. Enhanced nonlinear insert model. 19th International Conference on Composite structures, Porto, PT[HAL] / [BIB]
2016ACLJoël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Composite Structures, Elsevier, 148, p.127-143[HAL] / [BIB] / [DOI]
2016ACLLoïc Bernard, Guilhem Michon, Rached El Fatmi, Bruno Castanié. Static and dynamic analysis of bending–torsion coupling of a CFRP sandwich beam. Composite Structures, Elsevier, 145, p.26 - 36[HAL] / [BIB] / [DOI]
2016ACLCyril Sola, Bruno Castanié, Laurent Michel, Frederic Lachaud, Arnaud Delabie, Emmanuel Mermoz. On the role of kinking in the bearing failure of composite laminates. Composite Structures, Elsevier, 141, p.184-193[HAL] / [BIB] / [DOI]
2016COMJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES. International Conference on Sandwich Structures, Floride, US[HAL] / [BIB]
2016PM. Ramanakoto, Florent Eyma, T. Ramananantoandro, J. Geisler, Bruno Castanié. Collage et finition des surfaces bois usinées. Quelles caractéristiques pour quelles performances?. 5èmes Journées scientifiques du GDR 3544 Sciences du bois, Bordeaux, FR[HAL] / [BIB]
2016COML. Bernard, Bruno Castanié, Guilhem Michon. Dynamic bending-twisting coupling of an horizontally graded CFRP sandwich beam. 11th International Conference on Sandwich Structures ICSS-11, Florida, US[HAL] / [BIB]
2016COMBruno Castanié. Safety failure envelops to validate composite structure. Proceedings of ICCS19 19th International Conference on Composite Structures, Porto, PT[HAL] / [BIB]
2016COMJ.P. Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Bruno Castanié. Experimental investigation on impact behaviour of wood-based sandwich structures. Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016), Turin, IT[HAL] / [BIB]
2016COMBruno Castanié. COMPOSITE STRUCTURES IN AERONAUTICS: PAST, PRESENT AND FUTURE. The 5th Burapha University International Conference 2016, July 28-29, Pattaya, Thailand,, Pattaya, TH[HAL] / [BIB]
2016COMS. Dols, Christophe Bouvet, Bruno Castanié, L. Mezeix, J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. 11th International Conference on Sandwich Structures ICSS-11, Florida, US[HAL] / [BIB]
2016ACLCyril Sola, Bruno Castanié, Laurent Michel, Frederic Lachaud, Arnaud Delabie, Emmanuel Mermoz. On the role of kinking in the bearing failure of composite laminates. Composite Structures, Elsevier, 141, p.184--193[HAL] / [BIB]
2015PBruno Castanié, Juan de Dios Rodriguez-Ramirez, Christophe Bouvet, Jean-Paul Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives. SUPMECA Assemblages mécaniques - Evolutions récentes et perspectives 2015, Saint-Ouen, FR[HAL] / [BIB]
2015ACLM. Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites. Experimental Mechanics, Society for Experimental Mechanics, 55(3), p. 519-528[HAL] / [BIB] / [DOI]
2015PM. Ramanakoto, T. Ramananantoandro, J. Geisler, Bruno Castanié, Florent Eyma. Caractérisation de l'état de surface du bois usinée pour un collage acceptable. 4èmes Journées scientifiques du GDR 3544 Sciences du bois, Clermont Ferrand, FR[HAL] / [BIB]
2015PBruno Castanié, Christophe Bouvet, J. Serra, C. Petiot. Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge. Journées Nationales sur les Composites 2015, Villeurbanne, FR[HAL] / [BIB]
2015COMC. Sola, Laurent Michel, Frederic Lachaud, Bruno Castanié, A. Delabie, E. Mermoz. BEARING RESPONSE OF CFRPs : COMPARATIVE STUDY OF WOVEN AND UD FABRIC QUASI ISOTROPIC LAMINATES UNDER STATIC AND FATIGUE LOAD. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, Porto, PT[HAL] / [BIB]
2015COMJ. Serra, Bruno Castanié, Christophe Bouvet, C. Petiot. Digital Image Correlation and Thermography analysis of notched CFRP under tension. ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, Porto, PT[HAL] / [BIB]
2015COMJ. Serra, Bruno Castanié, Christophe Bouvet, C. Petiot. Discrete Ply Modelling analysis of notched CFRP under tension. ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, Porto, PT[HAL] / [BIB]
2015COMBruno Castanié. THE VERTEX PROJECT: COMPLEX LOADING ANALYSIS AND VALIDATION OF COMPOSITE STRUCTURES. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, Porto, PT[HAL] / [BIB]
2015COMV. Achard, Christophe Bouvet, Bruno Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, Porto, PT[HAL] / [BIB]
2015COMY. Aminanda, K. Mansur Ali, M. Nasir, M. Nazreen, A. Rivai, Bruno Castanié, Philippe Olivier. Spring-back Prediction of CRFP Composite Laminate Ribs. Conference on Advances in Composite Materials and Structures, Istanbul, April 2015, Istanbul, TR[HAL] / [BIB]
2015COML. Bernard, Guilhem Michon, Bruno Castanié, R. El Fatmi, V. Negre, D. Reveillon. Analyse Dynamique et Statique du Couplage Flexion-Torsion d’une Poutre Sandwich. JNC 19, Journées Nationales sur les Composites, Lyon, France, Lyon, FR[HAL] / [BIB]
2015COMC. Sola, Laurent Michel, Frederic Lachaud, Bruno Castanié, A. Delabie, E. Mermoz. Comportement en matage de stratifiés quasi-isotropes à renforts tissés ou quasi-UD.. JNC 19, Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet2013 2015, Lyon, FR[HAL] / [BIB]
2015COMBruno Castanié, J.D.D. Rodriguez Ramirez, Christophe Bouvet, J.-P. Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives.. Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen, Saint-Ouen, FR[HAL] / [BIB]
2015COMV. Achard, Christophe Bouvet, Bruno Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015, Lyon, FR[HAL] / [BIB]
2015COMBruno Castanié, Alain Daidié, Christophe Bouvet, Victor Achard, Louis Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France, Saint-Ouen, FR[HAL] / [BIB]
2015COMM. Ramanakoto, Florent Eyma, T. Ramanantoandro, Philippe Gallien, Bruno Castanié. Wood surfaces characteristics for an acceptable bonding strength. 22th International Wood Machining Seminar, Québec, CA[HAL] / [BIB]
2015ACLSoraya Catche, Robert Piquet, Frederic Lachaud, Bruno Castanié, Audrey Benaben. Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates. Journal of Composite Materials, SAGE Publications, 49(10), p.1223-1240[HAL] / [BIB] / [DOI]
2015ACLL. Mezeix, A. Seman, M. N. M. Nasir, Y. Aminanda, A. Rivai, Bruno Castanié, Philippe Olivier, K. M. Ali. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures, Elsevier, 124, p.196--205[HAL] / [BIB]
2014ACLAhmed Abbadi, Laurent Michel, Bruno Castanié. Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing. Advanced composites letters, Woodhead Publishing Limited, 23(6), p.142-148[HAL] / [BIB] / [DOI]
2014ACLVictor Achard, Christophe Bouvet, Bruno Castanié, Clément Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures, Elsevier, vol. 113, pp. 369-381[HAL] / [BIB] / [DOI]
2014ACLMadjid Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range. Composites Part A: Applied Science and Manufacturing, Elsevier, 66, p.142--154[HAL] / [BIB]
2014COMV. Achard, Christophe Bouvet, Bruno Castanié, C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy), Ischia, IT[HAL] / [BIB]
2014COML. Mezeix, M.N. Nasir, L. Aminanda, A. Rivai, Bruno Castanié, Philippe Olivier, K. Ali Mansour. Spring-back prediction through numerical simulation for composite manufacturing using autoclave process. Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, Harbin, CN[HAL] / [BIB]
2014COMChristophe Bouvet, Samuel Rivallant, J.-J. Barrau, N. Hongkarnjanakul, Bruno Castanié, H. Abdulhamid, T. Lisle, E. Abi Abdallah, B. Ostre, S. Petit. Discrete ply modelling of impact and compression after impact on composite laminates. Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July, Toulouse, FR[HAL] / [BIB]
2014ACLRobert Piquet, Frederic Lachaud, Soraya Catché, Bruno Castanié. Tolérance aux dommages de perçages dans les assemblages boulonnés composites. Revue des composites et des matériaux avancés, 24(4), p.481--493[HAL] / [BIB]
2014ACLMadjid Haddad, Redouane Zitoune, H. Bougherara, Florent Eyma, Bruno Castanié. Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior. Composites Part B: Engineering, 57, p.136--143[HAL] / [BIB]
2014COMS. Adam, L. Mezeix, A. Rivai, Y. Aminanda, Philippe Olivier, Bruno Castanié, K. Ali Mansour. Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process. Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, Harbin, CN[HAL] / [BIB]
2014COML. Bernard, D. Cornette, V. Nègre, B. Kerdreux, Bruno Castanié, Guilhem Michon. Couplage Aéroélastique Flexion-Torsion de Pale d’Hélicoptère. ViSHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr), Aix en Provence, FR[HAL] / [BIB]
2014ACLAhmed Abbadi, Laurent Michel, Bruno Castanié. Experimental Analysis of Debonding of Skin/Stringer Interfaces Under Cyclic Loading and Ageing. Advanced Composites Letters, 23(6), p.142--148[HAL] / [BIB]
2013ACLLudovic Barrière, Steven Marguet, Bruno Castanié, Philippe Cresta, Jean-Charles Passieux. An adaptive model reduction strategy for post-buckling analysis of stiffened structures. Thin-Walled Structures, Elsevier, 73, p.81-93[HAL] / [BIB] / [DOI]
2013ACLAlvine Njionhou, Florentin Berthet, Bruno Castanié. Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven. International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(9-12), p.1289-1302[HAL] / [BIB] / [DOI]
2013COMFlorentin Berthet, Alvine Njionhou Kepnang, Bruno Castanié. Influence géométrique de la présence de fils de couture sur la perméabilité d'un stratifié. Influence of stitch thread on permeability of a laminate. JNC 18 - 18èmes Journées Nationales sur les Composites, 9 p., Nantes, FR[HAL] / [BIB]
2013COMN. Cadorin, Redouane Zitoune, Francis Collombet, Bruno Castanié, M. Seve. Influence of cutting parameters and wear in drilling of 3D wowen carbon/epoxy composite. 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2, Montréal, CA[HAL] / [BIB]
2013COMBruno Castanié, S. Crézé, J.-J. Barrau, L. Risse. Offset Failure in Filled Hole Compression Tests. 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2., Montréal, CA[HAL] / [BIB]
2013COMM. Haddad, Redouane Zitoune, H. Bougherara, Florent Eyma, Bruno Castanié. Influence of trimming process on the surface quality and on the mechanical behavior of CFRP structures.. 19th International Conference on Composite Materials., Montréal, CA[HAL] / [BIB]
2013COBruno Castanié, Yulfian Aminanda, Jean-Jacques Barrau, Pascal Thevenet. Discrete Modeling of the Crushing of Nomex Honeycomb Core and Application to Impact and Post-impact Behavior of Sandwich Structures.[HAL] / [BIB]
2013COML. BarriÈre, Steven Marguet, Jean-Charles Passieux, Bruno Castanié, P. Cresta. Modeling strategies for postbuckilig of large stiffened structures. ICCS 16, Intenational Conference on Composite Structure, June 17-20, Porto, PT[HAL] / [BIB]
2013COMLudovic Barrière, Steven Marguet, Philippe Cresta, Bruno Castanié, Jean-Charles Passieux. Décomposition de domaine et réduction de modèle: stratégie de résolution pour le post-flambement local des structures raidies. 11e colloque national en calcul des structures, Giens, FR[HAL] / [BIB]
2013ACLRedouane Zitoune, N. Cadorin, Bruno Castanié, M. Sève. Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage. Revue des Composites et des Materiaux Avances, 23(3), p.387--404[HAL] / [BIB]
2013COMS. Dols, Christophe Bouvet, Bruno Castanié, L. Mezeix, J.-P. Giavarini. Experimental analysis of impact and pull-through after impact in insert in sandwich structures. 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013, Porto, PT[HAL] / [BIB]
2013COMS. Dols, Christophe Bouvet, Bruno Castanié, L. Mezeix, J.-P. Giavarini. Impact et tenue résiduelle des inserts de structures sandwichs. JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013, Nantes, FR[HAL] / [BIB]
2013COMN. Cadorin, Redouane Zitoune, Bruno Castanié, Francis Collombet, M. Seve. Etude expérimentale de l'influence des paramètres de coupe et de l'usure de l'outil sur la qualité de percage d'un composite tissé 3D.. JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013, Nantes, FR[HAL] / [BIB]
2013COMM. Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Influence du procédé d'usinage sur l'usinabilité et le comportement mécanique de pièces composites. JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013, Nantes, FR[HAL] / [BIB]
2013OBruno Castanié, Christophe Bouvet, D. Guedra-Degeorges. Structures en Matériaux Composites Stratifiés.[HAL] / [BIB]
2013COM. Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Influence of Tool Geometry and Machining Parameters on the Surface Quality and the Effect of Surface Quality on Compressive Strength of Carbon Fibre Reinforced Plastic.[HAL] / [BIB]
2013PL. BarriÈre, Jean-Charles Passieux, Steven Marguet, Bruno Castanié, P. Cresta. Adaptive Model Reduction for Local Post-Buckling Analysis. 2nd International Workshop on Reduced Basis, POD and PGD model (Blois, Fr), Blois, FR[HAL] / [BIB]
2013ACLMadjid Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Machinability and surface quality during high speed trimming of multi directional CFRP. International Journal of Machining and Machinability of Materials, Inderscience, 13(2/3), p.289[HAL] / [BIB] / [DOI]
2012ACLLouis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures, Elsevier, vol. 94, pp. 3082-3091[HAL] / [BIB] / [DOI]
2012ACLLouis Adam, Alain Daidié, Bruno Castanié, Elodie Bonhomme. Application of high-performance computing to a bolt static tensile test. International Journal on Interactive Design and Manufacturing, Springer Verlag, 6(3), p.195-203[HAL] / [BIB] / [DOI]
2012ACLAlvine Njionhou, Florentin Berthet, Bruno Castanié, Christophe Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. Applied Composite Materials, Springer Verlag (Germany), vol. 19, pp. 885-899[HAL] / [BIB] / [DOI]
2012COMBruno Castanié, Y. Aminanda, C. Schwob. Modelling Of Impact On Sandwich Structure For Fast Maintenance Loops. ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012., Brisbane, AU[HAL] / [BIB]
2012COML. BarriÈre, Steven Marguet, Bruno Castanié, P. Cresta. A Computational Strategy For Post-buckling Analysis Of Large Stiffened Structures. ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012, Brisbane, AU[HAL] / [BIB]
2012OS. Abrate, Bruno Castanié, Y. Rajapakse. Recent advances in dynamic failure of composite and sandwich structures.[HAL] / [BIB]
2012COMBruno Castanié, Jean-François Ferrero. Nonlinear Response of Symmetric Sandwich structures Subjected to in-plane loads. ICSS 10, 10th International Conference On Sandwich Structures. Nantes, France, 27-29 August 2012, Nantes, FR[HAL] / [BIB]
2012COMM. Haddad, Redouane Zitoune, Florent Eyma, Bruno Castanié. Effect of Machining Parameters on high speed trimming of CFRP. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Venice, IT[HAL] / [BIB]
2011ACLJavier Toral-Vasquez, Bruno Castanié, Jean-Jacques Barrau, Nicolas Swiergiel. Multi-level analysis of low-cost Z-pinned composite joints: Part 2 : Joint Behavior. Composites Part A: Applied Science and Manufacturing, Elsevier, 42(12), p.2082-2092[HAL] / [BIB]
2011COMLouis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Modélisation par éléments cohésifs de l'essai d'arrachement de fixations dans un stratifié. 17èmes Journées Nationales sur les Composites (JNC17), p.22, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMK. Alvine Njionhou, Florentin Berthet, Bruno Castanié, Christophe Bouvet. Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus. 17èmes Journées Nationales sur les Composites (JNC17), p.32, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMSoraya Catché, Robert Piquet, Frederic Lachaud, Bruno Castanié, A. Bénaben. Influence de l'état de surface du trou après perçage sur le comportement en matage de matériaux composite à fibres de carbone unidirectionnelles et résine en époxy. 17èmes Journées Nationales sur les Composites (JNC17), p.97, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011INVBruno Castanié. Recent advances on aeronautique structures. International Conference on Mechanical, Automotive and Aerospace Engineering 2011,ICMAAE '11, Kuala-Lumpur, May 17-19, 2011., Kuala-Lumpur, MY[HAL] / [BIB]
2011COMS. Catche, R. Piquet, Frederic Lachaud, Bruno Castanié, A. Benaben. Relation between surface roughness indicators and static strengh of drilled laminates. 15th International Conference on Composite Structures, ICCS 16, Porto, June 28-30, Porto, PT[HAL] / [BIB]
2011COML. Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates. ICCS16, Porto (Portugal), 28-30 juin, Porto, PT[HAL] / [BIB]
2011ACLJavier Toral-Vasquez, Bruno Castanié, Jean-Jacques Barrau, Nicolas Swiergiel. MULTI-LEVEL ANALYSIS OF LOW-COST Z-PINNED COMPOSITE JUNCTIONS. PART 1 : SINGLE Z-PIN BEHAVIOR. Composites Part A: Applied Science and Manufacturing, Elsevier, 42(12), p.2070-2081[HAL] / [BIB] / [DOI]
2010ACLBruno Castanié, Serge Crézé, Jean-Jacques Barrau, Frederic Lachaud, Laurent Risse. EXPERIMENTAL ANALYSIS OF FAILURES IN FILLED HOLE COMPRESSION TESTS OF CARBON/EPOXY LAMINATE. Composite Structures, Elsevier, 92(5), p.1192-1199[HAL] / [BIB]
2010ACLAlvine Njionhou Kepnang, Florentin Berthet, Bruno Castanié. Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication. Matériaux & Techniques, EDP Sciences, 98(2), p.151-163[HAL] / [BIB] / [DOI]
2010COML. Adam, Alain Daidié, Bruno Castanié, E. Bonhomme. Explicit simulation and high-performance computing, application to a bolt tensile test. IDMME-Virtual Concept 2010, Bordeaux, France, Bordeaux, FR[HAL] / [BIB]
2010COMA. Abbadi, Laurent Michel, Bruno Castanié. Experimental Analysis of Composite Structures Debonding under Cyclic Loading. ICCE-18 Anchorage, Alaska,USA, July 4-10, 2010, Alaska, US[HAL] / [BIB]
2010COML. Mézeix, D. Poquillon, Christophe Bouvet, Bruno Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibres As Core Material: Processing And Mechanical Properties. Icss 9, Pasadena, California, June 14-16, California, US[HAL] / [BIB]
2010COMAlvine Njionhou Kepnang, Florentin Berthet, Bruno Castanié. Relationships between process parameters and mechanical properties of laminated plates made by L.R.I.. FPCM 10 -10th International conference on Flow Processes in Composite Materials, 9 p., Monte Verita, CH[HAL] / [BIB]
2010COMFlorentin Berthet, Alvine Njionhou Kepnang, Bruno Castanié. Composites NCF carbone epoxy infusés : matériaux -procédés -propriétés. Matériaux 2010, 11 p., Nantes, FR[HAL] / [BIB]
2009ACLJulien Bertolini, Bruno Castanié, Jean-Jacques Barrau, Jean-Philippe Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1: Non-specific specimen level. Composite Structures, Elsevier, 90(4), p.381-391[HAL] / [BIB] / [DOI]
2009ACLY. Aminanda, Bruno Castanié, J-J. Barrau, P. Thevenet. Experimental and numerical study of compression after impact of sandwichs structures with metallic skins. Composites Science and Technology, Elsevier, 69(1), p.50[HAL] / [BIB] / [DOI]
2009COMJavier Toral, Bruno Castanié, Jean-Jacques Barrau, Sébastien Didierjean. Analyse multi-niveau de jonctions économiques par cloutage = Multi-level analysis of low-cost Z-pinned junctions. JNC16, 10 p., Toulouse, FR[HAL] / [BIB]
2009ACLChristophe Bouvet, Bruno Castanié, Matthieu Bizeul, Jean-Jacques Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements. International Journal of Solids and Structures, Elsevier, 46(14-15), p.2809-2821[HAL] / [BIB] / [DOI]
2009COMJ. Bertolini, Bruno Castanié, J.-J. Barrau, J.-P. Navarro. experimental analysis of pull-out strength of z-pins and screws in carbon-epoxy laminate. 15th International Conference on Composite Structures, ICCS 15, Porto, June 15-17, 2009., Porto, PT[HAL] / [BIB]
2009ACLJulien Bertolini, Bruno Castanié, Jean-Jacques Barrau, Jean-Philippe Navarro, Caroline Petiot. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2: Element and panel level. Composite Structures, Elsevier, 90(4), p.392-403[HAL] / [BIB] / [DOI]
2009ACLY. Aminanda, Bruno Castanié, J.-J. Barrau, P. Thévenet. Experimental and numerical study of compression after impact of sandwich structures with metallic skins. Composites Science and Technology, Elsevier, 69(1), p.50-59[HAL] / [BIB]
2009COMAlvine Njionhou Kepnang, Florentin Berthet, Bruno Castanié. Parameters affecting mechanical properties of composite manufactured by liquid resin infusion (LRI). ICCM 17 -17th International Conference on Composite Materials, 10 p., Edinburg, GB[HAL] / [BIB]
2008ACLBruno Castanié, Yulfian Aminanda, Christophe Bouvet, Jean-Jacques Barrau. CORE CRUSH CRITERION TO DETERMINE THE STRENGTH OF SANDWICH COMPOSITE STRUCTURES SUBJECTED TO COM-PRESSION AFTER IMPACT. Composite Structures, Elsevier, 86(1-3), p.243-250[HAL] / [BIB]
2008ACLJulien Bertolini, Bruno Castanié, Jean-Jacques Barrau, Jean-Philippe Navarro. An experimental and numerical study on omega stringer debonding. Composite Structures, Elsevier, 86(1-3), p.233-242[HAL] / [BIB]
2008ACLP. Bunyawanichakul, Bruno Castanié, J.-J. Barrau. Non-linear finite element analysis of inserts in composite sandwich structures. Composites Part B: Engineering, Elsevier, 39(7-8), p.1077-1092[HAL] / [BIB]
2008ACLBruno Castanié, Christophe Bouvet, Y. Aminanda, J.-J. J.-J. Barrau, P. Thevenet. Modelling of low energy/low velocity impact on Nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering, Elsevier, 35(7), p.620[HAL] / [BIB] / [DOI]
2005ACLY. Aminanda, Bruno Castanié, J.-J. Barrau, P. Thévenet. Modélisation de l'indentation des structures sandwichs à peaux métalliques. Mécanique et Industries, Elsevier, 6(5), p.487-498[HAL] / [BIB]
2005ACLJean-Jacques Barrau, Serge Crézé, Bruno Castanié. Buckling and post-buckling of beams with flat webs. Thin-Walled Structures, Elsevier, 43(6), p.877-894[HAL] / [BIB]
2005ACLY. Aminanda, Bruno Castanié, J. -J. Barrau, P. Thévenet. Experimental Analysis and Modeling of the Crushing of Honeycomb Cores. Applied Composite Materials, Springer Verlag (Germany), 12(3-4), p.213-227[HAL] / [BIB]
2005ACLP. Bunyawanichakul, Bruno Castanié, J. -J. Barrau. Experimental and Numerical Analysis of Inserts in Sandwich Structures. Applied Composite Materials, Springer Verlag (Germany), 12(3-4), p.177-191[HAL] / [BIB]
2004ACLBruno Castanié. Combined shear/compression structural testing of asymmetric sandwich structures. Experimental Mechanics, Society for Experimental Mechanics, 44(5), p.461-472[HAL] / [BIB]
2002ACLBruno Castanié, J.-J. Barrau, J.-P. Jaouen. Theoretical and experimental analysis of asymmetric sandwich structures. Composite Structures, Elsevier, 55(3), p.295-306[HAL] / [BIB] / [DOI]
2001ACLJean-François Ferrero, Jean-Jacques Barrau, Jean Marie Segura, Bruno Castanié, Michel Sudre. Torsion of thin-walled composite beams with midplane symmetry. Composite Structures, Elsevier, 54(1), p.111 - 120[HAL] / [BIB] / [DOI]
2001ACLJean-François Ferrero, Jean-Jacques Barrau, Jean Marie Segura, Michel Sudre, Bruno Castanié. Analytical theory for an approach calculation of non-balanced composite box beams. Thin-Walled Structures, Elsevier, 39(8), p.709 - 729[HAL] / [BIB] / [DOI]