Damien Texier

Chargé de recherche - Centre National de la Recherche Scientifique (CNRS)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
et du groupe Métrologie, Identification, Contrôle et surveillance (MICS)
0M04, Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi
 
    (recherche)

Autre :

Damien Texier sur ResearchGate et sur Google scholar



Production scientifique :
27 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2018ACLMahdi Masoumi Khalilabad, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint. Journal of Manufacturing Processes, Society of Manufacturing Engineers, 86 - 95, 34[HAL] / [DOI]
2018COMJean-Charles Stinville, D. Texier, Nicolas Vanderesse, Florent Bridier, Jia Liu, Philippe Bocher, Mclean P. Echlin, Patrick G. Callahan, Tresa M. Pollock. Sub-grain scale elastic and plastic deformations in polycrystalline metallic alloys assessed via digital image correlation techniques. Photomechanics 2018[HAL]
2018COMJean-Charles Stinville, François Bourdin, Mclean P. Echlin, William C. Lenthe, Florent Bridier, D. Texier, Jonathan Cormier, Patrick Villechaise, Valéry Valle, Tresa M. Pollock. High Resolution Strain Measurements in a Polycrystalline Superalloy during Plastic Deformation: Slip Band Discontinuity Analysis. TMS2018[HAL]
2018ACLD. Texier, F. Atmani, P. Bocher, F. Nadeau, J. Chen, Y. Zedan, N. Vanderesse, V. Demers. Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation. International Journal of Fatigue, Elsevier, 20-233, 116[HAL] / [DOI]
2017ACLJean-Charles Stinville, William C. Lenthe, Mclean P. Echlin, Patrick G. Callahan, Damien Texier, Tresa M. Pollock. Microstructural statistics for fatigue crack initiation in polycrystalline nickel-base superalloys. International Journal of Fracture, Springer Verlag, 221 - 240, 208[HAL] / [DOI]
2017COMR. Bertrand, D. Texier, H Robe, Y. Zedan, E. Feulvarch, P. Bocher. Heterogeneous mechanical behavior of dissimilar aluminum alloys FSWed joints assessed by OHR-DIC characterization. FSWP2017[HAL]
2017COMJean-Charles Stinville, Patrick G. Callahan, Mclean P. Echlin, William C. Lenthe, Tresa M. Pollock, D. Texier, Florent Bridier, Philippe Bocher, François Bourdin, Jonathan Cormier, Patrick Villechaise, Valéry Valle, S. Ismonov, M. Soare, A. Loghin, J. Marte. High-resolution strain measurements in a polycrystalline superalloy during deformation at high temperature. TMS 2017[HAL]
2017ACLJean-Charles Stinville, Mclean P. Echlin, Patrick G. Callahan, Victoria M. Miller, Damien Texier, Florent Bridier, Philippe Bocher, Tresa M. Pollock. Measurement of Strain Localization Resulting from Monotonic and Cyclic Loading at 650°C inNickel Base Superalloys. Experimental Mechanics, Society for Experimental Mechanics, 1289-1309, 57[HAL] / [DOI]
2017ACLDamien Texier, Daniel Monceau, Fabrice Crabos, Eric Andrieu. Tensile properties of a non-line-of-sight processed β-γ-γ′ MCrAlY coating at high temperature. Surface and Coatings Technology, Elsevier, 28-36, 326, Part A[HAL] / [DOI]
2016COMMahdi Masoumi, Yasser Zedan, Damien Texier, Mohammad Jahazi, Philippe Bocher. Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters. ICWNDT2016[HAL]
2016ACLDamien Texier, Daniel Monceau, Z. Hervier, Eric Andrieu. Effect of interdiffusion on mechanical and thermal expansion properties at high temperature of a MCrAlY coated Ni-based superalloy. Surface and Coatings Technology, Elsevier, pp. 81-90, vol. 307[HAL] / [DOI]
2016ACLDamien Texier, Jonathan Cormier, Patrick Villechaise, Jean-Charles Stinville, Chris J. Torbet, Stéphane Pierret, Tresa M. Pollock. Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime: the role of non-metallic inclusions. Materials Science and Engineering: A, Elsevier, 122 - 136, 678[HAL] / [DOI]
2016COMMahdi Masoumi Khalilabad, Yasser Zedan, D. Texier, Mohammad Jahazi, Philippe Bocher. The Influence of Tool Geometry on Mechanical Properties of Friction Stir Welded AA-2024 and AA-2198 Joints. 34th CONFERENCE AND EXHIBITION ICSOBA, 34th CONFERENCE AND EXHIBITION ICSOBA[HAL]
2016COMHesser Taboada Michel, Layla Sasaki Reda, Georgia Effgen Santos, Jonathan Cormier, Christian Dumont, Patrick Villechaise, Philippe Bocher, D. Texier, Eric Georges, Florent Bridier, Florence Hamon, Alexandre Devaux. Mechanical Properties of Cast & Wrought Hybrid Disks. Superalloys 2016, 539-548[HAL] / [DOI]
2016COMD Delbergue, Damien Texier, M. Levesque, P. Bocher. Comparison of Two X-Ray Residual Stress Measurement Methods: Sin2 ψ and Cos α, Through the Determination of a Martensitic Steel X-Ray Elastic Constant. Residual Stresses 2016: ICRS-10, 55 - 60, 2[HAL] / [DOI]
2016ACLDamien Texier, Ana Casanova Gómez, Stéphane Pierret, Jean-Michel Franchet, Tresa M. Pollock, Patrick Villechaise, Jonathan Cormier. Microstructural features controlling the variability in low-cycle fatigue properties of alloy Inconel 718DA at intermediate temperature. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 1096 - 1109, 47[HAL] / [DOI]
2016COMD. Texier, Eric Andrieu, Daniel Monceau, Serge Selezneff, Arnaud Longuet. Brittle to ductile behavior transition of β-NiAlPt coated Ni-based single crystal superalloy at high temperature. Plasticity 2016[HAL]
2016ACLD. Texier, Y. Zedan, T. Amoros, E. Feulvarch, J.C. Stinville, P. Bocher. Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint. Materials and Design, Elsevier, 217-229, 108[HAL] / [DOI]
2016ACLJ.C. Stinville, P. Echlin, Damien Texier, F. Bridier, P. Bocher, T.M. Pollock. Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation. Experimental Mechanics, Society for Experimental Mechanics, 197–216, 56[HAL] / [DOI]
2016ACLDamien Texier, Daniel Monceau, Jean-Claude Salabura, Ronan Mainguy, Eric Andrieu. Micromechanical testing of ultrathin layered material specimens at elevated temperature. Materials at High Temperatures, Taylor and Francis, 325-337, 33[HAL] / [DOI]
2014ACLDamien Texier, Daniel Monceau, Ronan Mainguy, Eric Andrieu. Evidence of High-Temperature Strain Heterogeneities in a Nickel-Based Single-Crystal Superalloy. Advanced Engineering Materials, Wiley-VCH Verlag, 60 - 64, 16[HAL] / [DOI]
2013COMD. Texier, Daniel Monceau, Eric Andrieu. Measure of the gradient of mechanical properties in MCrAlY coated MC2 Ni-base superalloy system at high temperature. CFM 2013[HAL]
2013PhDD. Texier. Mesure et Evolution des gradients de propriétés mécaniques dans le système superalliage à base de nickel MC2 revêtus McrAlY. Measurement and Evolution of the gradient of mechanical properties in MCrAlY coated MC2 nickel based superalloy system.[HAL]
2012COMD. Texier, Daniel Monceau, Eric Andrieu, Zéline Hervier. Creep behaviour of a nickel-based single crystal superalloy at the dendritic scale using micro-tensile specimen. Creep 2012 / JIMIS 11[HAL]
2010COMDamien Texier, Daniel Monceau, Eric Andrieu, Georges Cailletaud. Effet de l'état métallurgique sur les propriétés mécaniques d'éprouvettes amincies. Matériaux 2010, 9 p.[HAL]
2009ACLP. Masset, D. Texier, M. Schütze. Coefficients of thermal expansion of (Ni 0·5 Al 0·5 ) (1–x) Hf x alloys (x =0...0·2). Materials Science and Technology, Maney Publishing, 874-879, 25[HAL] / [DOI]
2008COMPatrick Masset, D. Texier, Michael Schütze. Corrosion Behavior of NiAl (1-x) Hfx (x= 0... 0.2) Alloys in Chlorine Based High Temperature Environments. 214th ECS Meeting, 35-42, 16[HAL] / [DOI]