Joseph Morlier

Professeur - Institut Supérieur de l'Aéronautique et de l'espace (ISAE-SUPAERO)
Membre du groupe Modélisation des Systèmes et Microsystèmes Mécaniques (MS2M)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
Activités de recherche :
  • AIAA Member
  • Structural & Multidisciplinary Optimization [Surrogate Modeling, multifidelity] 

PhD thesis of Dimitri Bettebghor [AIRBUS] with ONERA*

Postdoc Of Nicolas Roussouly [RTRA SAE] with ONERA and CERFACS*
PhD thesis of Mohamed Bouhlel [SNECMA] with ONERA*
PhD thesis of Joan Mas Colomer thesis [SUPAERO-ONERA]

PhD thesis of Simone Coniglio [AIRBUS] with MS2M/ISM

PhD thesis of Pierre-jean Barjhoux [IRT Saint Exupery/AIRBUS) with ONERA DADS/ISAE

PhD thesis of Thibaut Hirschler [LAMCOS/IMT]

 

    • UAV, Aircraft Design &  FSI 

PhD thesis of Fazila Zawawi with ISAE-SUPAERO DAEP/MAV Research Center*
PhD thesis of Elisa Bosco [AIRBUS] with ISAE-SUPAERO DAEP

Postdoc of Claudia Bruni [CEDAR «
Chair for Eco-Design of AiRcraft »
] with  ISAE-SUPAERO DCAS

Phd of Alessandro Squeglia [CEDAR «
Chair for Eco-Design of AiRcraft »
] with 
 ISAE-SUPAERO DCAS / ONERA

 

        • Flight physics Identification, modal parameters and loads [Signal Processing, Robust Identification] 

        • PhD thesis of Marion Gonzalez [AIRBUS] with MS2M/ISM*
        • PhD thesis of Ankit Chiplunkar [AIRBUS] with ISAE-SUPAERO DISC

         

      • Structural Health Monitoring [Damage Identification in Composites, Pattern Recognition] 

PhD thesis of Amir Shahdin [MS2M/ISS]*

PhD thesis of Ahmed Jhinaoui with INRIA I4S*
PhD of Guillaume Lelias [avec MSC/SIMU]*



Activités d'enseignement :

Structural [and Multidisciplinary] Optimization / Optimisation de structures [et multidisciplinaire] (3A Supaero + Masters MAE1)

Finite Element Analysis / Calcul de structures par éléments finis (3A Supaero + Masters MAE1)
Structural Engineering / Calcul de structures (2A Supaero)
System Dynamics / Introduction aux systèmes dynamiques (1A électif Supaero)
Scientific computing and optimization / Calcul Scientifique et optimisation (1A Supaero + Masters MAE1)


Responsabilités collectives :

Ancien Animateur de l’axe ISS (2012-2016)

Animation scientifique, stratégie,
brainstorming

Responsable de l’approfondissement
STRUCTURES et MATERIAUX (3A Supaero)

Reviewer pour: Elsevier Journal of Sound and Vibration, Elsevier
Mechanical Systems and Signal Processing, ô°€Elsevier NDT E
international, Elsevier International Journal of Solids and
Structures, Sage Structural Health Monitoring, ô°€Elsevier
Composites Structures, Technopress Smart Structures and
systems, Springer Structural and Multidisciplinary Optimization.



Activités administratives de soutien à la recherche :
Projet UE “MAAXIMUS”

Projet EPICEA “SAPES COMPOSITES”

Projet RTRA STAE “OSYCAF”
Projet Postdoc Chaire “CEDAR”
Projet UE Prof Invité Bourse “MARIE CURIE NEXTGEN AIRLINERS”
Projet IRT “MDA-MDO”


Activités techniques de soutien à la recherche :
  • 21-23 juin 2016: ICA_DGM

    A 3 full days of «Intensive  Coding pArty for Dynamics of Granular Material Â»



Autre :

 

 



Production scientifique :
27 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2018ACLSimone Coniglio, Christian Gogu, Joseph Morlier. Weighted Average Continuity Approach and Moment Correction New strategies for non-consistent mesh projection in structural mechanics. Archives of Computational Methods in Engineering, Springer Verlag[hal][bib] [doi]
2018ACLArnaud Wilhelm, Samuel Rivallant, Jean-François Ferrero, Joseph Morlier. Sandwich shield subjected to bird impact: Use of surrogate models for influencing parameter analysis and shield behaviour understanding. Journal of Sandwich Structures and Materials, SAGE Publications[hal][bib] [doi]
2018ACLE Paroissien, Frederic Lachaud, Joseph Morlier, S. Schwartz. A Direct Method for the Assessment of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II. Reviews of Adhesion and Adhesives[hal][bib] [doi]
2018COMAlessandro Sgueglia, Peter Schmollgruber, Nathalie Bartoli, Olivier Atinault, Emmanuel Bénard, Joseph Morlier. Exploration and Sizing of a Large Passenger Aircraft with Distributed Electric Ducted Fans. AIAA - Scitech 2018, pp. 1-33[hal][bib]
2018ACLMohamed Bouhlel, Nathalie Bartoli, Rommel G. Regis, Abdelkader Otsmane, Joseph Morlier. Efficient Global Optimization for high-dimensional constrained problems by using the Kriging models combined with the Partial Least Squares method. Approche d’optimisation globale pour des problèmes contraints en grande dimension en utilisant les modèles de krigeage et la méthode de régression des moindres carrés partiels. Engineering Optimization, Taylor & Francis[hal][bib] [doi]
2016ACLMohamed Amine Bouhlel, Nathalie Bartoli, Abdelkader Otsmane, Joseph Morlier. Improving kriging surrogates of high-dimensional design models by Partial Least Squares dimension reduction. Structural and Multidisciplinary Optimization, Springer Verlag (Germany), pp. 935-952, vol. 53[hal][bib] [doi]
2016PAnkit Chiplunkar, Emmanuel Rachelson, Michele Colombo, Joseph Morlier. Identification of Physical Parameters Using Change-Point Kernels. Society for Industrial and Applied Mathematics, Uncertainty Quantification, 2016[hal][bib]
2016COMPierre-Louis Chiambaretto, Miguel Charlotte, Joseph Morlier, Philippe Villedieu, Yves Gourinat. Surrogate Granular Materials for Modal Test of Fluid Filled Tanks. IMAC XXXIV 2016[hal][bib] [doi]
2016COPierre-Louis Chiambaretto, Miguel Charlotte, Joseph Morlier, Philippe Villedieu, Yves Gourinat. Surrogate Granular Materials for Modal Test of Fluid Filled Tanks.[hal][bib]
2016ACLMohamed Amine Bouhlel, Nathalie Bartoli, Abdelkader Ostmane, Joseph Morlier. An improved approach for estimating the hyperparameters of the kriging model for high-dimensional problems through the partial least squares method. Mathematical Problems in Engineering, Hindawi Publishing Corporation, 1-11, 2016[hal][bib] [doi]
2016ACLMohamed Amine Bouhlel, Nathalie Bartoli, Abdelkader Otsmane, Joseph Morlier. An improved approach to estimate the hyper-parameters of the kriging model for high-dimensional problems through the Partial Least Squares method. Mathematical Problems in Engineering, Hindawi Publishing Corporation[hal][bib]
2016ACLFazila Mohd Zawawi, Peng Lv, Sebastien Prothin, Joseph Morlier, Emmanuel Bénard, Jean-Marc Moschetta. Performance Enhancement of Tilt-Body Micro Air Vehicle by Use of Orthotropic Laminated Proprotors. Applied Mechanics and Materials, Trans Tech Publications, pp. 585-590, vol. 819[hal][bib] [doi]
2015APMohamed-Amine Bouhlel, Nathalie Bartoli, Abdelkader Otsmane, Joseph Morlier. Improving kriging surrogates of high-dimensional design models by Partial Least Squares dimension reduction.[hal][bib]
2015ACLGuillaume Lélias, Eric Paroissien, Frederic Lachaud, Joseph Morlier, Sébastien Schwartz, Cyril Gavoille. An extended semi-analytical formulation for fast and reliable mode I/II stress analysis of adhesively bonded joints. International Journal of Solids and Structures, Elsevier, pp. 18-38, vol. 62[hal][bib] [doi]
2014ACLAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. A new SSI algorithm for LPTV systems: application to a hinged-bladed helicopter. Mechanical Systems and Signal Processing, Elsevier, 152--166, 42[hal][bib] [doi]
2013COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. Vibration Monitoring of Operational Wind Turbine. 9th International workshop on structural health monitoring[hal][bib]
2013COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. Uncertainties Quantification for Subspace Identification of rotating Systems. 5th IFAC International Workshop on Periodic Control Systems (PSYCO'2013)[hal][bib]
2013COMNicolas Roussouly, Joseph Morlier, Miguel Charlotte, Michel Salaün. Approche fiabiliste pour l'optimisation locale d'un problème couplé fluide-structure. 11e colloque national en calcul des structures[hal][bib]
2012COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier, Wensong Zhou. Generalized subspace identification for rotating systems: application to a wind turbine. Leuven Conference on Noise and Vibration Engineering[hal][bib]
2012COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. Subspace Instability Monitoring for Linear Periodically Time-Varying Systems.. 16th IFAC Symposium on System Identification[hal][bib]
2012COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. Subspace Identification for Linear Periodically Time-varying Systems. 16th IFAC Symposium on System Identification[hal][bib]
2012COMJoseph Morlier, Laurent Mevel. Modeshapes Recognition Using Fourier Descriptors: A Simple SHM Example. 30th International Modal Analysis Conference[hal][bib]
2012COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. Extension of Subspace Identification to LPTV Systems: Application to Helicopters. 30th International Modal Analysis Conference[hal][bib]
2011COMAhmed Jhinaoui, Laurent Mevel, Joseph Morlier. A CUSUM test with sliding reference for ground resonance monitoring. ANCRISST 2011[hal][bib]
2011COMDimitri Bettebghor, Nathalie Bartoli, Stephane Grihon, Joseph Morlier, Manuel Samuelides. Approche en paramètres de stratification pour l'optimisation biniveau de structures composites. 10e colloque national en calcul des structures, Clé USB[hal][bib]
2010APAhmed Jhinaoui, Laurent Mevel, Joseph Morlier, Leonardo Sanches. Ground resonance monitoring for hinged-blades helicopters: statistical CUSUM approach.[hal][bib]
2009COMManuel Samuelides, Dimitri Bettebghor, Stéphane Grihon, Antoine Merval, Joseph Morlier. Modèles réduits en optimisation multiniveau de structures aéronautiques. 9e Colloque national en calcul des structures[hal][bib]