Philippe Lours

Professeur - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (IMT Mines Albi)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
1M13, Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi
 
    (recherche)
Activités de recherche :

Ingénieur INSA Physique des Matériaux – Dipl. Eng. INSA Physics of Materials
DEA de Physique des solides – MSc Solid State Physics
Docteur de l’Université Paul Sabatier Université de Toulouse – PhD
Post-Doctoral fellow at Lawrence Berkeley Laboratory (University of California at Berkeley)
HDR (Ability for Supervising Research) de l’Institut National Polytechnique de Toulouse –
Chevalier dans l’ordre des Palmes Académiques

• relations microstructures – propriétés d’usage des métaux, des alliages métalliques et des revêtements
relationships between microstructure and engineering properties of metal alloys and coatings
• durabilité et endommagement des oxydes et des barrières thermiques, ingéniérie des surfaces
durability and degradation of oxides and thermal barrier coatings, surface engineering
•plasticité des superalliages et des alliages d’aluminium
plasticity of superalloys and aluminum alloys
• matériaux pour applications aérospatiales
materials for aerospace applications



Activités d'enseignement :

Créateur de l’option “Matériaux pour l’Aéronautique et le Spatial” [ingénieur Mines-Albi – Master 2]
founder of Master program “Materials for aerospace applications”
Créateur du domaine “Ingénierie des Matériaux Avancés & des Structures” [ingénieur Mines-Albi – Master 1&2]
founder of Master program “Advanced Materials and Mechanical Engineering”
Créateur et responsable du Master International AeroMat-Innovation
Founder and Head of International MSc
AeroMat-Innovation

Professeur chargé de cours de Science et Génie des Matériaux à  l’ISAE – Supaéro
Invited Professor in Materials Science and Engineering at ISAE – Supaéro
Professeur Invité à  l’Université des Transports et Communications de Hanoi (Vietnam)
Adjunct Professor at the University of Transports & Communications – Hanoi (Vietnam)
Professeur Invité à  l’Universitas Indonesia Jakarta (Indonesia)
Adjunct-Professor at Universitas Indonesia Jakarta (Indonesia)

 



Responsabilités collectives :

VICE-DIRECTOR of the INTERNATIONAL AFFAIRS at IMT MINES ALBI
In charge of Asia & Oceania
HEAD of MSc AeroMat-Innovation

Membre du Comité Consultatif de l’Enseignement d’IMT Mines d’Albi
Membre du Bureau de Direction de l’Ecole Doctorale Aéronautique-Astronautique



Autre :
Biography :
Philippe Lours is Professor at Mines Albi. He is Vice-Director of the International Affairs at Mines Albi and Head of the International Master program AeroMat-Innovation in partnership with IMT Business School (Paris-Evry).
HDR of the National Polytechnic Institute of Toulouse, Philippe Lours is part of the board of the PhD School “Aeronautics & Astronautics” and was awarded the rank of “chevalier dans l’ordre des palmes académiques” in 2009.
Philippe Lours conducts research and teaching at IMT Mines Albi – University of Toulouse since 1995. He is also Invited Professor at ISAE – Supaéro (Institut Supérieur de l’Aéronautique et de l’Espace – Supaéro), at the Université Paul Sabatier de Toulouse, at the University of Transports and Communications Hanoi (Vietnam). In june 2016, Philippe Lours has been appointed Adjunct-Professor by the University of Indonesia – Jakarta.
He has been lecturing in several universities over the world, including the University of California at Berkeley (1990), Ecole Polytechnique de Montréal (1993), Université Joseph Fourier Grenoble (1998), Toyohashi University of Technology – Japan (2002), Dalian Maritime University – China (2004), Universitatea Dunarea de Jos – Galati Romania (2000-2005), the University of Science & Technology Hanoi – USTH (2013), the Civil Aviation University of China – Tianjin (from 2013), Changwon National University – South Korea (from  2015), Institut Teknologi Bandung ITB Indonesia (2016), the University of Indonesia Jakarta (from 2017), Hanoi University of Science and Technology HUST (from 2017).
Graduated in Materials Science & Engineering and in Solid State Physics at INSA (Institut National des Sciences Appliquées – 1986), Philippe Lours defended his doctoral thesis on the plasticity of single crystalline nickel based superalloys investigated by In Situ Transmission Electron Microscopy in 1989 at Université Paul Sabatier – University of Toulouse. After a postdoctoral fellowhip at the Lawrence Berkeley Lab. (Berkeley, USA) where he further specialised in Transmission Electron Microscopy including High Resolution and High Voltage TEM, he has held several positions of R & D engineer, process engineer and project engineer in the metal alloys industry in Toulouse, France & Orangeburg, New York-USA (sputtering targets) and Montreal, Québec-Canada (shape memory alloys).
Full Professor at Mines Albi where he has successively founded the Master programs “Materials for Aeronautics & Space” in 2003, and “Advanced Materials & Mechanical Engineering” in 2010. He is now head of the newly launched International Master AeroMat-Innovation for which he established a partnership with IMT Business School in Paris-Evry. Author of 56 articles in international journals with peer review and book chapter, Philippe Lours has contributed to more than 70 national and international conferences. He is former director of the research team PUMMA (Enginering Properties & Microstructure of Advanced Materials) at Institut Clément Ader. Director, co-director or supervisor of about twenty PhD students, his research focusses on the relationship between the microstructure and the engineering properties of metallic materials and coatings with a particular attention on high temperature materials for aerospace applications (superalloys and thermal barrier coatings).
Early 2016, Prof. Philippe Lours has published “Au cœur des matériaux cristallins”, a textbook written in french for bachelor/master students in Materials Science & Mechanical Engineering, edited by “Les Presses des Mines” in both print (ISBN978-2-35671-370-4) and electronic (http://nte.mines-albi.fr/SciMat) formats and prefaced by Pr. André Pineau (https://www.pressesdesmines.com/produit/au-coeur-des-materieux-cristallins/). Writting of an enhanced  english version is in progress.


Production scientifique :
98 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2018ACLStéphane Amiel, Etienne Copin, Thierry Sentenac, Philippe Lours, Yannick Le Maoult. On the thermal sensitivity and resolution of a YSZ:Er 3+ /YSZ:Eu 3+ fluorescent thermal history sensor. Sensors and Actuators A: Physical, Elsevier, p.42-52, 272[hal][bib] [doi]
2018ACLFabien Blas, Florence Ansart, Philippe Lours, Jean-Pierre Bonino, Sandrine Duluard, Vanessa Vidal, Lisa Pin, Guillaume Pujol, Luiza Bonin. Processing thermal barrier coatings via sol-gel route: Crack network control and durability. Surface and Coatings Technology, Elsevier, p.71-77, 334[hal][bib] [doi]
2017ACLPierre Planques, Vanessa Vidal, Philippe Lours, Vincent Proton, Fabrice Crabos, Julitte Huez, Bernard Viguier. Characterization of the mechanical properties of thermal barrier coatings by 3 points bending tests and modified small punch tests. Surface and Coatings Technology, Elsevier, p.40-46, 332[hal][bib] [doi]
2017ACLPierre Planques, Vanessa Vidal, Philippe Lours, Vincent Proton, Fabrice Crabos, Julitte Huez, Bernard Viguier. Mechanical and thermo-physical properties of plasma-sprayed thermal barrier coatings: a literature survey. Oxidation of Metals, Springer Verlag, p.133-143, vol. 88[hal][bib] [doi]
2017COMPierre Planques, Vanessa Vidal, Philippe Lours, Vincent Proton, Fabrice Crabos, Julitte Huez, Bernard Viguier. Mechanical properties of yttria-stabilised-zirconia for thermal barrier coating systems : effects of testing procedure and thermal aging. ITSC 2017 - International Thermal Spray Conference and Exposition, p.302-307[hal][bib]
2017ACLYankuan Liu, Yinghui Liu, Philippe Lours, Thierry Sentenac, Vanessa Vidal, Zhiping Wang, Kunying Ding. Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness. Surface and Coatings Technology, Elsevier, 417-424, 313[hal][bib] [doi]
2017ACLEtienne Copin, X. Massol, Stéphane Amiel, Thierry Sentenac, Yannick Le Maoult, Philippe Lours. Novel erbia-yttria co-doped zirconia fluorescent thermal history sensor. Smart Materials and Structures, IOP Publishing, art. 015001-11 p., 26[hal][bib] [doi]
2016COMAmiel Stéphane, Etienne Copin, Thierry Sentenac, Yannick Le Maoult, Philippe Lours. Caractérisation de marqueurs photoluminescents de l'histoire thermique. SFT 2016 - Congrès annuel de la Société Française de Thermique, 8 p.[hal][bib]
2016OPhilippe Lours. Au coeur des matériaux cristallins. 217 p.[hal][bib]
2015ACLY. Liu, V. Vidal, Sabine Le Roux, Fabien Blas, F. Ansart, Philippe Lours. Influence of isothermal and cyclic oxidation on the apparent interfacial toughness in thermal barrier coating systems. Journal of the European Ceramic Society, Elsevier, p. 4269-4275, 35[hal][bib] [doi]
2015ACLSabine Le Roux, Frédéric Deschaux-Beaume, Thierry Cutard, Philippe Lours. Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials. Journal of the European Ceramic Society, Elsevier, 1063-1079, 35[hal][bib] [doi]
2014ACLEtienne Copin, Thierry Sentenac, Yannick Le Maoult, Fabien Blas, Florence Ansart, Vanessa Vidal, Philippe Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing. Surface and Coatings Technology, Elsevier, pp. 90-96, vol. 260[hal][bib] [doi]
2014COMEtienne Copin, Yannick Le Maoult, Thierry Sentenac, Fabien Blas, Thi Hoai Giang Tran, Philippe Lours. Comparison of IR thermography and photoluminescence for early diagnostic of spallation and temperature sensing in thermal barrier coatings. 12th International conference on Quantitative Infrared Thermography, 9 p.[hal][bib] [doi]
2014ACLLisa Pin, Vanessa Vidal, Fabien Blas, Florence Ansart, Sandrine Duluard, Jean-Pierre Bonino, Yannick Le Maoult, Philippe Lours. Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life. Journal of the European Ceramic Society, Elsevier, pp. 961-974, vol. 34[hal][bib] [doi]
2013ACLLisa Pin, Christopher Pilgrim, Jörg Feist, Yannick Le Maoult, Florence Ansart, Philippe Lours. Characterisation of thermal barrier sensor coatings synthesised by sol–gel route. Sensors and Actuators A: Physical, Elsevier, pp. 289-296, vol. 199[hal][bib] [doi]
2013ACLLisa Pin, Florence Ansart, Jean-Pierre Bonino, Yannick Le Maoult, Vanessa Vidal, Philippe Lours. Reinforced sol-gel thermal barrier coatings and their cyclic oxidation life. Journal of the European Ceramic Society, Elsevier, pp. 269-276, vol. 33[hal][bib] [doi]
2013ACLArnaud Duchosal, Frédéric Deschaux-Beaume, Philippe Lours, Sergio Haro, Gilles Fras. Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools. Materials and Design, Elsevier, 731-739, 46[hal][bib] [doi]
2012ACLM. Cusick, F. Abu-Farha, Philippe Lours, Yannick Le Maoult, Gérard Bernhart, M. Khraisheh. Superplastic forming of AZ31 magnesium alloy with controlled microstructure. Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 810-816, 43[hal][bib] [doi]
2011ACLLisa Pin, Florence Ansart, Jean-Pierre Bonino, Yannick Le Maoult, Vanessa Vidal, Philippe Lours. Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings. Surface and Coatings Technology, Elsevier, pp. 1609-1614, vol. 206[hal][bib] [doi]
2011COMYannick Balcaen, Vanessa Vidal, Vincent Velay, Laurent Robert, Philippe Lours, Florence Pettinari-Sturmel, Joël Douin. Comparative Study, in Pure Titanium Sheet, of the Microstructural Evolution Induced by Incremental Forming Process and Plane Strain Tensile Tests. Ti 2011 - 12th World conference on titanium, 1148-1151, 2[hal][bib]
2011COMVanessa Vidal, Yannick Balcaen, Florence Pettinari-Sturmel, Joël Douin, Philippe Lours, Vincent Velay, Laurent Robert. Experimental Study of the Deformation Mechanisms in Textured Alpha-titanium Alloy Sheets. Ti 2011 - 12th World conference on titanium, 1290-1293[hal][bib]
2011COMInès Souki, Denis Delagnes, Philippe Lours. Influence of heat treatment on the fracture toughness and crack propagation in 5% Cr martensitic steel. ICM 11 - 11th International conference on the mechanical behavior of materials, 10[hal][bib] [doi]
2011ACLJulien Sniezewski, Philippe Lours, Yannick Le Maoult. Buckling and spalling failure of alumina grown by oxidation on ODS FeCrAl alloys. Materials at High Temperatures, Taylor and Francis, 17-20, 28[hal][bib] [doi]
2011COGérard Bernhart, Philippe Lours, Thierry Cutard, Vincent Velay, Fabien Nazaret. Processes and equipment for superplastic forming of metals. p.49-71[hal][bib] [doi]
2010ACLJulien Sniezewski, Yannick Le Maoult, Philippe Lours, Lisa Pin, Vincent Menvie Bekale, Daniel Monceau, Djar Oquab, Justine Fenech, Florence Ansart, Jean-Pierre Bonino. Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation. Surface and Coatings Technology, Elsevier, pp. 1256-1261, vol. 205[hal][bib] [doi]
2010COMLisa Pin, Florence Ansart, Philippe Lours, Julien Sniezewski, Justine Fenech, Jean Pierre Bonino, Yannick Le Maoult. Caractérisation du comportement en oxydation cyclique de barrières thermiques élaborées par voie sol-gel. Matériaux 2010, 6 p.[hal][bib]
2010COMInès Souki, Denis Delagnes, Philippe Lours. Influence du traitement thermique sur la ténacité et la propagation de fissures pour l'acier à 5% Cr. Matériaux 2010, 13 p.[hal][bib]
2010COMFabio Taina, Marco Pasqualon, Vincent Velay, Denis Delagnes, Philippe Lours. Effect of the LCF loading cycle characteristics on the fatigue life of inconel 718 at high temperature. 7th International symposium on superalloy 718 and derivatives, p.893-905[hal][bib]
2010ACLJulien Sniezewski, Yannick Le Maoult, Philippe Lours. Oxidation and spallation of FeCrAl alloys and thermal barrier coatings: in situ investigation under controlled temperature gradient. Materials at High Temperatures, Taylor and Francis, 101-108, 27[hal][bib] [doi]
2010ACLLisa Pin, Florence Ansart, Justine Fenech, Philippe Lours, Jean Pierre Bonino, Julien Sniezewski, Yannick Le Maoult. Advances in the field of new smart thermal barrier coatings. Advances in Science and Technology, p.136-141, 66[hal][bib]
2009ACLQi Yuhong, Philippe Lours, Yannick Le Maoult, Zhang Zongbao. Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses. Rare Metal Materials and Engineering, 1150-1153, 38[hal][bib]
2009ACLJulien Sniezewski, Vanessa Vidal, Philippe Lours, Yannick Le Maoult. Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Surface and Coatings Technology, Elsevier, 807-811, 204[hal][bib] [doi]
2009ACLQi Yu-Hong, Philippe Lours, Yannick Le Maoult. Spallation Process of Thermally Grown Oxides by In-Situ CCD Monitoring Technique. Journal of Iron and Steel Research, International, Elsevier, 90-94, 16[hal][bib] [doi]
2009COMGérard Bernhart, Vincent Velay, Philippe Lours. Heat Resistant Ni-Cr-Fe Steels for Superplastic Forming Dies: From Material Microstructure to Die Design. ICSAM 2009 - 10th International Conference on Superplasticity in Advanced Materials, 77-84, 433[hal][bib] [doi]
2009ACLTraian Branza, F. Deschaux-Beaume, Vincent Velay, Philippe Lours. A microstructural and low-cycle fatigue investigation of weld-repaired heat-resistant cast steels. Journal of Materials Processing Technology, Elsevier, 944-953, 209[hal][bib] [doi]
2009ACLTraian Branza, Frederic Deschaux-Beaume, G. Sierra, Philippe Lours. Study and prevention of cracking during weld-repair of heat-resistant cast steels. Journal of Materials Processing Technology, Elsevier, 536-547, 209[hal][bib]
2009ACLTraian Branza, Frederic Deschaux-Beaume, P. Velay, Philippe Lours. A microstructural and low-cyle fatigue investigation of weld-repaired heat-resistant cast steels. Journal of Materials Processing Technology, Elsevier, 944-953, 209[hal][bib]
2008COMM. Cusick, F. Abu-Farha, Philippe Lours, Yannick Le Maoult, Gérard Bernhart, M. Khraisheh. TOWARDS SUPERPLASTIC FORMING OF AZ31 MAGNESIUM ALLOY WITH CONTROLLED MICROSTRUCTURE. EuroSPF 2008[hal][bib]
2008COMJulien Sniezewski, Yannick Le Maoult, Philippe Lours. In situ Thermal Gradient Controlled Investigation of Spallation - Experimental Design and Preliminary Results. HTCPM 2008 - 7th International Symposium on High Temperature Corrosion and Protection of Materials, 1135-1143, 595-598[hal][bib] [doi]
2008ACLPhilippe Lours, Julien Sniezewski, Yannick Le Maoult, B. Pieraggi. Direct observations and analysis of the spallation of alumina scales grown on PM2000 alloy. Materials Science and Engineering: A, Elsevier, 40-48, 480[hal][bib] [doi]
2008ACLPhilippe Lours, Julien Sniezewski, Yannick Le Maoult, Bernard Pieraggi. Direct obervations and analysis of the spallation of alumina scales grown on PM2000 alloy. MATERIALS SCIENCE AND ENGINEERING. A, STRUCTURAL MATERIALS, p.40-48, 480[hal][bib]
2008COMPhilippe Lours, Traian Branza, Frederic Deschaux-Beaume. Weld-repair of heat resistant cast steels for SFP dies. 6th European Conference on superplastic forming Euro SFP08[hal][bib]
2008ACLJulien Sniezewski, Yannick Le Maoult, Philippe Lours. In situ thermal gradient controlled investigation of spallation -Experimental design and preliminary results. Materials Science Forum, Trans Tech Publications Inc., p.1135-1143, Vols. 595-598[hal][bib]
2008ACLEmilie Herny, Philippe Lours, Eric Andrieu, Jean-Marc Cloué, Philippe Lagain. Evolution of microstructure and impact-strength energy in thermally and thermomechanically aged 15-5 PH. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications, 299-304, vol. 222[hal][bib]
2008ACLA. Duchosal, Frederic Deschaux-Beaume, Cyril Bordreuil, Gilles Fras, Philippe Lours. Method for predicting risk of cracking during weld repair of heat resistant cast steels. Science and Technology of Welding and Joining, Maney Publishing, 126-135, 13[hal][bib] [doi]
2007COMAbdelaziz Sellidj, Soltane Lebaili, Philippe Lours. Vieillissement d'un dépôt d'alliage de type Stelitte F durant des recuits à haute température. JP 2007 -26èmes Journées de printemps, p.231-238[hal][bib]
2006COMJulien Sniezewski, Philippe Lours, Yannick Le Maoult. Etude in-situ de l'écaillage des couches d'oxydes de l'alliage PM 2000. Matériaux 2006, 10 p.[hal][bib]
2006COMEmilie Herny, M. C. Lafont, Eric Andrieu, Philippe Lours, Philippe Lagain, Jean Marc Cloue. Evolution of the mechanical properties of two precipitation hardening stainless steels after ageing at 400°C comparison between 15-5PH and 13-8PH. 3rd Conference on uses of steel, p.201-210[hal][bib]
2006COMPhilippe Lours, Yuhong Qi, Yannick Le Maoult, Bernard Pieraggi. In situ and ex situ investigation of the spallation of thermally grown oxides. THERMEC 2006 - 5th International conference on processing & manufacturing of advanced materials, 1134+, 539-543[hal][bib] [doi]
2005COMEmilie Herny, Philippe Lours, Jean Marc Cloue, Philippe Lagain, Simon Perusin, Eric Jourdain, Eric Andrieu. Local mechanical and microstructural characterization of electron beam welded 15-5PH stainless stell. Super-High Strength Steels, 11 p.[hal][bib]
2005ACLCy Gao, Philippe Lours, Gérard Bernhart. Thermomechanical stress analysis of superplastic forming tool. Journal of Materials Processing Technology, Elsevier, 281-291, 169[hal][bib] [doi]
2005COMArnaud Duchosal, Traian Branza, Cyril Bordreuil, Frédéric Deschaux Beaume, Philippe Lours, Gilles Fras. Macro-micro transition to model cracking phenomenas during multipasses welding processes. COMPLASS VIII -8th International conference on computational plasticity, p.890-893, 2[hal][bib]
2005COMTraian Branza, Arnaud Duchosal, Cyril Bordreuil, Frédéric Deschaux Beaume, Gilles Fras, Philippe Lours. Influence of the welding processing on weld repair quality of SPF tools. Euro SPF'05 -4th European Conference on Superplastic Forming, p.121-126[hal][bib]
2005COMYannick Le Maoult, Philippe Lours, Bernard Pieraggi. In situ investigation of the spallation of oxide scales grown on ODS alloy PM2000. 16th International Plansee seminar 2005, p.958-972, 1[hal][bib]
2005COMA. Duchosal, Traian Branza, Cyril Bordreuil, Frederic Deschaux-Beaume, Philippe Lours, Gilles Fras. Etude expérimentale et numérique du soudage-rechargement : prévision du risque de fissurations à froid d'un acier austénitique réfractaire. Séminaire Pluri-Formation ENISE[hal][bib]
2005COMA. Duchosal, Traian Branza, Cyril Bordreuil, Frederic Deschaux-Beaume, Philippe Lours, Gilles Fras. Micro transition to model cracking phenomenas during multipasses welding processes. 8th International conference on computational plasticity COMPLASS VIII, 890-893, 2[hal][bib]
2005COMTraian Branza, A. Duchosal, Cyril Bordreuil, Frederic Deschaux-Beaume, Philippe Lours, Gilles Fras. Influence of the mechanical properties of filler materials on weld repair quality of SPF tools. 4th European Conference on Superplastic Forming Euro SFP05, 121-126[hal][bib]
2005COMA. Duchosal, Traian Branza, Frederic Deschaux-Beaume, Cyril Bordreuil, Philippe Lours, Gilles Fras. Modélisation du comportement des aciers austénitiques pour la simulation numérique du soudage multipasse. 3ème Séminaire de la commission "Simulation Numérique du Soudage" de l'Association Française de Mécanique[hal][bib]
2004ACLTraian Branza, A Duchosal, Gilles Fras, Frédéric Deschaux-Beaume, Philippe Lours. Experimental and numerical investigation of the weld repair of superplastic forming dies. Journal of Materials Processing Technology, Elsevier, 1673-1680, 155[hal][bib] [doi]
2004COMCy Gao, Philippe Lours, Gérard Bernhart. Damages induced by thermomechanical cycles in superplastic forming tools. 7th Asia-Pacific symposium on engineering plasticity and its applications (AEPA2004), 93-98, 274-276[hal][bib] [doi]
2004COMTraian Branza, Alexandre Martinier, Arnaud Duchosal, Frédéric Deschaux Beaume, Gérard Bernhart, Philippe Lours. Fatigue damage and weld repair of heat resistant cast steel SPF dies. Euro-SPF 2004 -3rd European conference on superplastic forming, p.133-138[hal][bib]
2004COMGérard Bernhart, Thierry Cutard, Philippe Lours. Preface of the proceedings of Euro SPF 2004 : 3rd european conference on super plastic forming. Euro-SPF 2004 -3rd European conference on superplastic forming, 1 p.[hal][bib]
2004COMPascale Bruckel, Pascal Lamesle, Philippe Lours, B Pieraggi. Isothermal oxidation behaviour of a hot-work tool steel. 6th International Symposium on High Temperature Corrosion and Protection of Materials, 831-838, 461-464[hal][bib] [doi]
2004COMPhilippe Lours, Yannick Le Maoult, D Ade, B Pieraggi. Direct examinations of oxide scales upon cooling: a new way to analyse oxide scale spallation. 6th International Symposium on High Temperature Corrosion and Protection of Materials, 639-646, 461-464[hal][bib]
2004COMYannick Le Maoult, Philippe Lours, Didier Ade, Bernard Pieraggi. Etude dynamique de l'écaillage des oxydes de l'alliage PM2000 : apport d'une nouvelle technique de trajectographie. Colloque photomécanique 2004, p.369-376[hal][bib]
2004ACLF Delmas, Marie-José Casanove, Philippe Lours, Alain Couret, Armand Coujou. Quantitative TEM study of the precipitation microstructure in aluminium alloy Al(MgSiCu) 6056 T6. Materials Science and Engineering: A, Elsevier, 80-89, 373[hal][bib] [doi]
2004DOGérard Bernhart, Thierry Cutard, Philippe Lours. Euro SPF 2004 : third european conference on superplastic forming. 203 p.[hal][bib]
2004ACLYuhong Qi, Pascale Bruckel, Philippe Lours, Zhanping Zhang. Investigation of adhesion and fracture toughness of thermally grown oxide scales by interface indentation test. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, p.1233-1236, 25[hal][bib]
2003COMPhilippe Lours, Hv Bui, A Nafi, O Mercier, Gérard Bernhart. Rapid tooling for injection moulding process. 3rd International Symposium on Designing, Processing and Properties of Advanced Engineering Materials, ISAEM-2003, 789-792, 449-452[hal][bib] [doi]
2003COMHuy Vinh Bui, Philippe Lours, Gérard Bernhart, Bruno Le Razer, Philippe Barq. Outillage rapide : nouvelle technologie de fabrication rapide par frittage de poudre -analyse technique et scientifique. Colloque de la poudre au matériau massif SF2M-GFC -Commission poudres et matériaux frittés Journées annuelles du RFM, p.359-364[hal][bib]
2003COMPascale Bruckel, Pascal Lamesle, Philippe Lours, B Pieraggi. XRD investigations on the oxides grown on hot work tool steels in H2O-containing atmospheres. Electrochemical Society Symposium on High-Temperature Corrosion and Materials Chemistry IV, 135-146, 2003[hal][bib]
2003COMHuy Vinh Bui, Philippe Lours, Gérard Bernhart. Influence of porosity and anisotropy on the mechanical properties of direct laser sintered metal powder for injection moulding tools. 4th international conference on industrial tools, p.205-208[hal][bib]
2003COMGérard Bernhart, F Nazaret, A Martinier, C Gao, D Garriga-Majo, Thierry Cutard, Philippe Lours. Design of SPF dies based on advanced material behaviour models. 8th International Conference on Superplasticity in Advanced Materials, 123-130, 447-448[hal][bib] [doi]
2003ACLYh Qi, Pascale Bruckel, Philippe Lours. Interfacial toughness of the nickel-nickel oxide system. Journal of Materials Science Letters, Springer Verlag (Germany), 371-374, 22[hal][bib] [doi]
2003COMTraian Branza, Gérard Bernhart, Philippe Lours, Frédéric Deschaux Beaume, V. Richefeu, Arnaud Duchosal, Gilles Fras. Rechargement T.I.G. d'outillages de formage superplastique -essais et simulation. Colloque national MECAMAT, 4 p.[hal][bib]
2003DOJean-Claude Nièpce, Jean-Marc Chaix, Eric Gaffet, Michel Baron, John A. Dodds, Alain De Ryck, Alain Chamayou, Ange Nzihou, Didier Lecomte, Philippe Lours, Thierry Cutard, Gérard Bernhart, Rene David, Christophe Levaillant. De la poudre au matériau massif : colloque. Commission poudres et matériaux frittés SF2M-GFC - Journées annuelles du RFM, 381 p.[hal][bib]
2003ACLPascale Bruckel, Philippe Lours, Pascal Lamesle, Bernard Pieraggi. In situ ESEM investigations of the oxide growth on hot work tools steel: effect of the water vapour. Materials at High Temperatures, Taylor and Francis, 551-560, 20[hal][bib] [doi]
2003ACLF Delmas, Marie Vivas, Philippe Lours, Marie-José Casanove, Alain Couret, Armand Coujou. Straining mechanisms in aluminium alloy 6056. In-situ investigation by transmission electron microscopy. Materials Science and Engineering: A, Elsevier, 286-291, 340[hal][bib] [doi]
2002ACLStéphane Baleix, Gérard Bernhart, Philippe Lours. Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies. Materials Science and Engineering: A, Elsevier, 155-166, 327[hal][bib] [doi]
2001ACLStéphane Baleix, Sabine Le Roux, Gérard Bernhart, Philippe Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Journal of Materials Processing Technology, Elsevier, 321-328, 118[hal][bib] [doi]
2001ACLPhilippe Lours, Sabine Le Roux, Gérard Bernhart. Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000. Journal of Advanced Materials, p. 11-20, 33[hal][bib]
2001ACLPhilippe Lours, Stéphane Baleix, Gérard Bernhart. Investigation on the damages of superplastic forming tools. Journal of Materials Processing Technology, Elsevier, 117[hal][bib]
2001ACLPhilippe Lours, Thierry Cutard, Gérard Bernhart, Christophe Levaillant. Performances of metallic and ceramic tools for superplastic forming. International Journal of Materials and Product Technology, Inderscience, 445-452[hal][bib]
2000COMStéphane Baleix, Gérard Bernhart, Philippe Lours. Investigation of the spallation of oxides grown on thermally cycled heat resistant cast steels. 5th International Symposium on High Temperature Corrosion and Protection of Materials, 539-546, 369-372[hal][bib] [doi]
1999COMStéphane Baleix, Sabine Le Roux, Gérard Bernhart, Philippe Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. AMPT'99 -Advances in Materials and Processing Technologies, p. 1175-1184, 2[hal][bib]
1999COMYannick Le Maoult, Stéphane Baleix, Philippe Lours, Gérard Bernhart. Application industrielle de la thermographie infrarouge au comportement des outillages de formage superplastique. Journées GAMI du CETIM Les applications de la thermographie dans les industries mécaniques, 9 p.[hal][bib]
1999COMStéphane Baleix, Yannick Le Maoult, S. Frenois, Yves Marcel, Philippe Lours, Gérard Bernhart. Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool. 3rd international congress on thermal stresses, p. 317-320[hal][bib]
1999COMStéphane Baleix, Philippe Lours, Gérard Bernhart. High Temperature Mechanical behaviour of Ni-Cr-Fe heat resistant cast steel. Eight international conference on mechanical behaviour of materials ICM 8, 653-657[hal][bib]
1999ACLThierry Cutard, Emmanuel Cailleux, Philippe Lours, Gérard Bernhart. Structural and mechanical properties of a refractory concrete for superplastic forming tools. Industrial Ceramics, Ceramurgica, 100-102, 19[hal][bib]
1999COMGérard Bernhart, Philippe Lours, Farhad Rezai Aria, Christophe Levaillant. Effet de la thermique transitoire sur l'endommagement des outillages dans les procédès de formage. Journée de la société française des thermiciens, 8 p.[hal][bib]
1998COMMarie Vivas, Philippe Lours, Christophe Levaillant, Marie-José Casanove, Alain Couret, Armand Coujou. On the strengthening of aluminium alloy 6056T6. 6th international conference on aluminum alloys ICAA6, p.943-948, 2[hal][bib]
1998ACLPhilippe Lours, Joël Alexis, Gérard Bernhart. Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C. Journal of Materials Science Letters, Springer Verlag (Germany), 1089-1093, 17[hal][bib] [doi]
1997ACLMarie Vivas, Philippe Lours, Christophe Levaillant, Alain Couret, Marie-José Casanove, Armand Coujou. Determination of precipitate strength in aluminium alloy 6056-T6 from transmission electron microscopy in situ straining data. Philosophical Magazine a, Informa UK (Taylor & Francis), 921-931, 76[hal][bib] [doi]
1997COMMarie Vivas, Philippe Lours, Christophe Levaillant, Alain Couret, Marie-José Casanove, Armand Coujou. A microscopy study of precipitate distribution and precipitate overcoming processes in a aluminium alloy 6056 T6. 11th international conference on the strenght of metals and alloys ICSMA 11, 2p.[hal][bib]
1997ACLMarie Vivas, Philippe Lours, Christophe Levaillant, Alain Couret, Marie-José Casanove, Armand Coujou. Transmission electron microscopy study of precipitate morphology and precipitate overcoming processes in aluminum alloy 6056 T6. Materials Science and Engineering: A, Elsevier, 664-667, 234[hal][bib] [doi]
1997COMPhilippe Lours, Joël Alexis, Gérard Bernhart. High temperature oxidation behaviour and creep properties of ods alloy PM2000. 14th international plansee seminar, p.869-886, 1[hal][bib]
1996COMMarie Vivas, Philippe Lours, Christophe Levaillant, Alain Couret, Marie-José Casanove, Armand Coujou. Some aspects of precipitation hardening in aluminum alloy 6056 T6 - TEM experiments. 5ème conférence internationale sur les alliages d'aluminium, 1305-1310, 217-222[hal][bib] [doi]
1996ACLMarie Vivas, Philippe Lours, Christophe Levaillant, Alain Couret, Marie José Casanove, Armand Coujou. Some aspects of precipitation hardening in aluminium alloy 6056 T6 : T.E.M experiments. Materials Science Forum, Trans Tech Publications Inc., p. 1305-1310, Vol. 217-222[hal][bib]