Anna Carla Araujo
![]() | Maître de conférence - Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse) Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO) BR2-0039, Espace Clément Ader, 3 rue Caroline Aigle 31400 Toulouse araujo@insa-toulouse.fr (recherche) (enseignement) |
Activités de recherche :
The area of research focuses on manufacturing processes, especially in the process of machining (metal cutting) and, recently, additive manufacturing. The mechanical behavior of the machining and micro-cutting cutting tool is modeled and experimental monitoring of cutting forces, wear, tool life, machinability and other process factors is performed. The workpiece materials of interest are: aerospace and petroleum industry materials and biocompatible materials for medical implants (Titanium, Aluminum, Chrome-Cobalt alloys and aeronautic composites).
CV Lattes: http://lattes.cnpq.br/4198469560134761
Activités d'enseignement :
She taught the following disciplines in undergraduate and graduate courses: manufacturing processes, machining (theory and practice), additive manufacturing and design of experiments (DOE).
Her academic education took place in the Mechanical Engineering of UFRJ (Graduation, Master and Doctorate) with doctorate Sandwich at UIUC (University of Illinois at Urbana Champaign).
She worked for three years in the steel industry managing the small team of manufacturing, assembly and installation of continuous casting flow equipment in Brazilian and South American companies of the steel industry after the doctorate and before rejoining the academic life.
Before coming to France, she was a Professor at the Department of Mechanical Engineering at CEFET/RJ (2006-2010) and at UFRJ (2010-2019). At UFRJ she was director of International Relations at the Polytechnic School (2014-2017) and she also worked leading the Brafitec Project with Paristech Schools. She held a postdoctoral position for one year (2017-2018) at ENSAM Paristech in the LaBoMaP laboratory integrated in the Saint Jean Industries industry in Cluny, France.
Production scientifique :
17 contributions trouvéesAnnée | Type | Auteurs et titre du document | Liens |
---|---|---|---|
2020 | ACL | Fábio de Oliveira Campos, Anna Carla Araujo, André Luiz Jardini Munhoz, Shiv Gopal Kapoor. The influence of additive manufacturing on the micromilling machinability of Ti6Al4V: A comparison of SLM and commercial workpieces. Journal of Manufacturing Processes, Society of Manufacturing Engineers, 60, p.299-307 | [HAL] / [BIB] / [DOI] |
2020 | ACL | Anna Carla Araujo, Guillaume Fromentin, Patrick Blandenet. Investigation on PCD cutting edge geometry for Ti6Al4V high-feed milling. International Journal of Advanced Manufacturing Technology, Springer Verlag, 111, p.1785 - 1796 | [HAL] / [BIB] / [DOI] |
2020 | O | Anna Carla Araujo. Usinagem para Engenharia: Um curso de mecânica do corte. | [HAL] / [BIB] |
2019 | COM | Rodrigo Oliveira Henz, Fábio Campos, Anna Carla Araujo, Guillaume Fromentin. CUTTING FORCES IN HIGH FEED MILLING. 25 International Conference for Mechanical Engineering, Uberlândia, BR | [HAL] / [BIB] |
2019 | ACL | Arthur Wilson Fonseca Coelho, Rossana Mara da Silva Moreira Thiré, Anna Carla Araujo. Manufacturing of gypsum–sisal fiber composites using binder jetting. Additive Manufacturing, Elsevier, 29, p.100789 | [HAL] / [BIB] / [DOI] |
2019 | ACL | Fábio de Oliveira Campos, Anna Carla Araujo, Shiv Gopal Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V. Journal of Micro and Nano-Manufacturing, ASME, 7(2) | [HAL] / [BIB] / [DOI] |
2019 | ACL | Fábio de Oliveira Campos, Anna Carla Araujo, Shiv Gopal Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti–6Al–4V. Journal of Micro and Nano-Manufacturing, ASME, 7(2) | [HAL] / [BIB] / [DOI] |
2019 | COM | Matheus Coelho Cosenza, Marcos Valério Ribeiro, Anna Carla Araujo. Stability on turning of Inconel 718 using vibration-assisted machining. DINAME 2019, Buzios, BR | [HAL] / [BIB] |
2018 | COM | Fábio Campos, Anna Carla Araujo, Shiv Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V. WCMNM 2018, Slovenia, SI | [HAL] / [BIB] |
2018 | ACL | Adriane Lopes Mougo, Fabio de Oliveira Campos, Anna Carla Araujo. Mechanistic study on micromilling of the super duplex stainless steel UNS S32750. Journal of Manufacturing Processes, Society of Manufacturing Engineers, 34, p.31-39 | [HAL] / [BIB] / [DOI] |
2018 | ACL | Anna Carla Araujo, Guillaume Fromentin. Investigation of tool deflection during milling of thread in Cr-Co dental implant. Science Arts & Métiers (SAM). International Journal of Advanced Manufacturing Technology, Springer Verlag, 99(1-4), p.531-541 | [HAL] / [BIB] / [DOI] |
2018 | ACL | Gleiton De Paula Oliveira, Maria Cindra Fonseca, Anna Carla Araujo. Residual stresses and cutting forces in cryogenic milling of Inconel 718. Procedia CIRP, ELSEVIER, 77, p.211-214 | [HAL] / [BIB] / [DOI] |
2017 | ACL | Gleiton de Paula Oliveira, Maria Cindra Fonseca, Anna Carla Araujo. Analysis of residual stress and cutting force in end milling of Inconel 718 using conventional flood cooling and minimum quantity lubrication. International Journal of Advanced Manufacturing Technology, Springer Verlag, 92(9-12), p.3265-3272 | [HAL] / [BIB] / [DOI] |
2017 | COM | Anna Carla Araujo, Guillaume Fromentin. Modeling Thread Milling Forces in Mini-hole in Dental Metallic Materials. 16th CIRP Conference on Modelling of Machining Operations, 58, p.623-628, Cluny, FR | [HAL] / [BIB] / [DOI] |
2017 | ACL | Cesar Giovanni Cabrera, Anna Carla Araujo, Daniel Alves Castello. On the wavelet analysis of cutting forces for chatter identification in milling. Advances in Manufacturing, 5(2), p.130-142 | [HAL] / [BIB] / [DOI] |
2016 | ACL | Z. Wang, V. Kovvuri, Anna Carla Araujo, M. Bacci, W.N.P. Hung, S.T.S. Bukkapatnam. Built-up-edge effects on surface deterioration in micromilling processes. Journal of Manufacturing Processes, Society of Manufacturing Engineers, 24, p.321-327 | [HAL] / [BIB] / [DOI] |
2015 | ACL | Anna Carla Araujo, Gabriel Mendes Mello, Francirlei Gripa Cardoso. Thread milling as a manufacturing process for API threaded connection: Geometrical and cutting force analysis. Journal of Manufacturing Processes, Society of Manufacturing Engineers, 18, p.75-83 | [HAL] / [BIB] / [DOI] |