Christophe Bouvet

Professeur - Institut Supérieur de l'Aéronautique et de l'espace (ISAE-SUPAERO)
Membre du groupe Matériaux et Structures Composites (MSC)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
Activités de recherche :

Mes activités de recherche concernent l’étude de l’endommagement des structures composites, et en particulier sous sollicitations d’impact, du point de vue expérimental et numérique.



Activités d'enseignement :

Mes activités d’enseignement se déroulent au sein de la formation ISAE-SUPAERO. J’y enseigne la mécanique des structures, la mécanique des milieux continus et en particulier les structures composites.



Production scientifique :
135 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019ACLJohn Susainathan, Florent Eyma, Emmanuel de Luycker, Arthur Cantarel, Christophe Bouvet, Bruno Castanié. Experimental investigation of compression and compression after impact of wood-based sandwich structures. Composite Structures, Elsevier, 220, p.236-249[HAL] / [BIB] / [DOI]
2019COMPierre Journoud, Christophe Bouvet, Samuel Rivallant, Nicolas Dubary, Leon Ratsifandrihana. Etude numérique de la propagation de fissure dans un composite tissé. Numerical study of the crack growth in a woven composite. JNC 21 (Journées Nationales sur les Composites 2019), Bordeaux, FR[HAL] / [BIB]
2019ACLN. Nguyen-Dinh, Redouane Zitoune, Christophe Bouvet, Sabine Le Roux. Surface integrity while trimming of composite structures: X-ray tomography analysis. Composite Structures, Elsevier, 210, p.735-746[HAL] / [BIB] / [DOI]
2019ACLBenoît Vieille, Juan-Daniel Pujols Gonzalez, Christophe Bouvet. Prediction of the ultimate strength of quasi-isotropic TP-based laminates structures from tensile and compressive fracture toughness at high temperature. Composites Part B: Engineering, Elsevier, 164, p.437-446[HAL] / [BIB] / [DOI]
2019ACLPablo Garcia Perez, Christophe Bouvet, Ameur Chettah, Frédéric Dau, Ludovic BallÈre, Patrick Peres. Effect of unstable crack growth on mode II interlaminar fracture toughness of a thermoplastic PEEK composite. Engineering Fracture Mechanics, Elsevier, 205, p.486-497[HAL] / [BIB] / [DOI]
2019ACLLaurent Mezeix, Simon Dols, Christophe Bouvet, Bruno Castanié, Jean-Paul Giavarini, Natthawat Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures. Journal of Sandwich Structures and Materials, SAGE Publications, 21(1), p.135-153[HAL] / [BIB] / [DOI]
2018ACLFadhel Chatti, Christophe Bouvet, Dominique Poquillon, Guilhem Michon. Numerical modelling of shear hysteresis of entangled cross-linked carbon fibres intended for core material. Computational Materials Science, Elsevier, 155, p.350-363[HAL] / [BIB] / [DOI]
2018ACLN. Dubary, Christophe Bouvet, Samuel Rivallant, L. Ratsifandrihana. Damage tolerance of an impacted composite laminate. Composite Structures, Elsevier, 206, p.261-271[HAL] / [BIB] / [DOI]
2018ACLFadhel Chatti, Dominique Poquillon, Christophe Bouvet, Guilhem Michon. Numerical modelling of entangled carbon fibre material under compression. Computational Materials Science, Elsevier, 151, p.14-24[HAL] / [BIB] / [DOI]
2018ACLJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing. Composite Structures, Elsevier, vol. 193, pp. 121-139[HAL] / [BIB] / [DOI]
2018ACLZhorachaid Thanawarothon, Abdelrahman Elmikaty, Christophe Bouvet, Laurent Mezeix. Noncircular CFRP bicycle’s chainring, part II: finite element analysis. Composites: Mechanics, Computations, Applications: An International Journal, 9(3), p.207-222[HAL] / [BIB] / [DOI]
2018ACLJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Damage Mechanics Modelling of the shear nonlinear behavior of Nomex honeycomb core. Application to sandwich beams. Mechanics of Advanced Materials and Structures, Taylor & Francis[HAL] / [BIB] / [DOI]
2018ACLBenoît Vieille, Juan-Daniel Pujols Gonzalez, Christophe Bouvet. Fracture mechanics of hybrid composites with ductile matrix and brittle fibers: Influence of temperature and constraint effect. Journal of Composite Materials, SAGE Publications[HAL] / [BIB] / [DOI]
2018ACLZhorachaid Thanawarothon, Paripat Pairat, Christophe Bouvet, Laurent Mezeix. Noncircular CFRP bicycle’s chainring. part I: static and low-velocity impact analysis. Composites: Mechanics, Computations, Applications: An International Journal, 9(3), p.189-205[HAL] / [BIB] / [DOI]
2017ACLJoël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading. Composite Structures, Elsevier, 181, p.145-157[HAL] / [BIB] / [DOI]
2017COMNicolas Dubary, Christophe Bouvet, Samuel Rivallant, Léon Ratsifandrihana. Etude numérique du dimensionnement d'un stratifié composite aéronautique pour la tolérance aux dommages d'impact. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMChristophe Bouvet, Kathy Prévautel, Julien Mathieu, Bruno Imbert, Stéphanie Jaminion. Mesure par thermographie infra-rouge du taux de restitution d'énergie critique d'interfaces de composites stratifiés UD et tissés. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJean-Emmanuel Chambe, Christophe Bouvet, Jean-François Ferrero, Olivier Dorival. Crash de tubes composites et dissipation d'énergie pour développement de sièges aéronautiques. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMPablo Garcia Pérez, Christophe Bouvet, Frédéric Dau, Ludovic BallÈre, Patrick Peres. Approches expérimentale et numérique pour la simulation de l'impact et de la compression après impact de stratifié composites à matrice thermoplastique. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJoel Serra, Jean-Emmanuel Pierré, Jean-Noël Périé, Jean-Charles Passieux, Christophe Bouvet, Bruno Castanié. Modélisation d'essais structuraux sur plaques entaillées. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJoel Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Etude expérimentale et numérique de la propagation de coupure dans des stratifiés composites soumis à de la traction simple. 13e colloque national en calcul des structures, Giens, Var, FR[HAL] / [BIB]
2017COMJoel Serra, Jean-Emmanuel Pierré, Jean-Noël Périé, Jean-Charles Passieux, Christophe Bouvet, Bruno Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. 13e colloque national en calcul des structures, Giens, Var, FR[HAL] / [BIB]
2017ACLN. Dubary, G. Taconet, Christophe Bouvet, Benoît Vieille. Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications. Composite Structures, Elsevier, 168, p.663 - 674[HAL] / [BIB] / [DOI]
2017ACLTeddy Lisle, Marie-Laetitia Pastor, Christophe Bouvet, Philippe Marguerès. Damage of woven composite under translaminar cracking tests using infrared thermography. Composite Structures, Elsevier, vol. 161, pp. 275-286[HAL] / [BIB] / [DOI]
2017ACLJoël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 2: Load envelopes for the assessment of panels with large notches. Composite Structures, Elsevier, 180, p.550-567[HAL] / [BIB] / [DOI]
2017ACLJoël Serra, Jean-Emmanuel Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié. Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures. Composite Structures, Elsevier, 179, p.224-244[HAL] / [BIB] / [DOI]
2017OChristophe Bouvet. Mechanics of Aeronautical Composite Materials.[HAL] / [BIB]
2017OChristophe Bouvet. Mécanique des solides, des matériaux et des structures aéronautiques.[HAL] / [BIB]
2017OChristophe Bouvet. Mechanics of aeronautical solids, materials and structures.[HAL] / [BIB]
2017COMJ. Serra, Christophe Bouvet, Bruno Castanié, C. Petiot. DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, Xi'an, CN[HAL] / [BIB]
2017INVChristophe Bouvet. Evaluation of fracture toughness in composite structures using Infrared Thermography. International Conference on Mechanics of Composites, Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJuan de Dios Rodriguez-Ramirez, Christophe Bouvet, Bruno Castanié. Shear testing of honeycomb cores for inserts. International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017, Paris, FR[HAL] / [BIB]
2017PJ.-E. Chambe, Christophe Bouvet, Jean-François Ferrero, Olivier Dorival. Energy dissipation during tubular structures crash for aircraft seats development. JNC 20 : Journées Nationales sur les Composites 2017, Champs-sur-Marne, FR[HAL] / [BIB]
2017COMJuan de Dios Rodriguez-Ramirez, Bruno Castanié, Christophe Bouvet. Analysis of nonlinear behavior on honeycomb cores. ICCM 21 International Conference on Composite Materials 21, Xi'an, 21-25 august, Xi'an, CN[HAL] / [BIB]
2017COMJ.-E. Chambe, Olivier Dorival, Christophe Bouvet, Jean-François Ferrero. Crash de structures composites tubulaires et absorption d’énergie pour le développement de sièges aéronautiques. Journées de la Recherche à l'Icam, Nantes, France, 28-29 nov. 2017, Nantes, FR[HAL] / [BIB]
2017COMJ. Serra, J.-E. Pierré, Jean-Charles Passieux, Jean-Noël Périé, Christophe Bouvet, Bruno Castanié, C. Petiot. The VERTEX program: complex loading and validation of aeronautic composite structures. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, Xi'an, CN[HAL] / [BIB]
2016ACLFabien Destic, Christophe Bouvet. Impact damages detection on composite materials by THz imaging. Case Studies in Nondestructive Testing and Evaluation, 6, p.53-62[HAL] / [BIB] / [DOI]
2016ACLBenjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Finite Element analysis of CFRP laminates subjected to compression after edge impact. Composite Structures, Elsevier, vol. 153, pp. 478-489[HAL] / [BIB] / [DOI]
2016ACLHakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Numerical simulation of impact and compression after impact of asymmetrically tapered laminated CFRP. International Journal of Impact Engineering, Elsevier, vol. 95, pp. 154-164[HAL] / [BIB] / [DOI]
2016ACLHakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Experimental study of compression after impact of asymmetrically tapered composite laminate. Composite Structures, Elsevier, vol. 149, pp. 292-303[HAL] / [BIB] / [DOI]
2016ACLJoël Serra, Christophe Bouvet, Bruno Castanié, Caroline Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Composite Structures, Elsevier, 148, p.127-143[HAL] / [BIB] / [DOI]
2016ACLL. Mezeix, D. Poquillon, Christophe Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part II: Analytical Model. Applied Composite Materials, Springer Verlag (Germany), 23(1), p.87 - 100[HAL] / [BIB] / [DOI]
2016ACLBenjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Experimental analysis of CFRP laminates subjected to compression after edge impact. Composite Structures, Elsevier, 152, p.767-778[HAL] / [BIB] / [DOI]
2016COChristophe Bouvet. Tolérance aux dommages d’impact des structures composites aéronautiques.[HAL] / [BIB]
2016COMS. Dols, Christophe Bouvet, Bruno Castanié, L. Mezeix, J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. 11th International Conference on Sandwich Structures ICSS-11, Florida, US[HAL] / [BIB]
2016COMF. Chatti, Christophe Bouvet, D. Poquillon, Guilhem Michon, L. Meizeix. Numerical Modeling of porous materials made with entangled fibers network. Euromech 569 - Chatenay-Malabry - France, Chatenay-Malabry, FR[HAL] / [BIB]
2016COMJ.D.D. Rodriguez Ramirez, Bruno Castanié, Christophe Bouvet, M. Deloubes, G. J.-P.. Enhanced nonlinear insert model. ICCS19 19th International Conference on Composite Structures, Porto, 5-9 september, Porto, PT[HAL] / [BIB]
2015ACLBenjamin Ostré, Christophe Bouvet, Clément Minot, Jacky Aboissière. Edge impact modeling on stiffened composite structures. Composite Structures, Elsevier, 126, p.314-328[HAL] / [BIB] / [DOI]
2015ACLTeddy Lisle, Christophe Bouvet, Marie-Laetitia Pastor, Thomas Rouault, Philippe Marguerès. Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts. Journal of Materials Science, Springer Verlag, 50(18), p.6154-6170[HAL] / [BIB] / [DOI]
2015ACLTeddy Lisle, Christophe Bouvet, Natthawat Hongkarnjanakul, Marie-Laetitia Pastor, Samuel Rivallant, Philippe Marguerès. Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography. Composites Science and Technology, Elsevier, 112, p.22-33[HAL] / [BIB] / [DOI]
2015ACLLaurent Mezeix, Dominique Poquillon, Christophe Bouvet. Entangled cross-linked fibres for an application as core material for sandwich structures - Part I: Experimental investigation. Applied Composite Materials, Springer Verlag (Germany), 23(1), p.71-86[HAL] / [BIB] / [DOI]
2015COMV. Achard, Christophe Bouvet, Bruno Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015, Lyon, FR[HAL] / [BIB]
2015COMSamuel Rivallant, J. Brassard, H. Abdulhamid, Christophe Bouvet. Etude expérimentale de l’impact basse vitesse et basse énergie sur plaques composites précontraintes. JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet, Lyon, FR[HAL] / [BIB]
2015COMBruno Castanié, J.D.D. Rodriguez Ramirez, Christophe Bouvet, J.-P. Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives.. Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen, Saint-Ouen, FR[HAL] / [BIB]
2015COMV. Achard, Christophe Bouvet, Bruno Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, Porto, PT[HAL] / [BIB]
2015COMBruno Castanié, Alain Daidié, Christophe Bouvet, Victor Achard, Louis Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France, Saint-Ouen, FR[HAL] / [BIB]
2015COMChristophe Bouvet, T. Lisle, N. Hongkarnjanakul, Marie-Laetitia Pastor, Samuel Rivallant, Philippe Marguerès. Mesure de la ténacité de la rupture de fibres en compression par thermographie infrarouge. JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet, Lyon, FR[HAL] / [BIB]
2015PBruno Castanié, Christophe Bouvet, J. Serra, C. Petiot. Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge. Journées Nationales sur les Composites 2015, Villeurbanne, FR[HAL] / [BIB]
2015COMJ. Serra, Bruno Castanié, Christophe Bouvet, C. Petiot. Digital Image Correlation and Thermography analysis of notched CFRP under tension. ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, Porto, PT[HAL] / [BIB]
2015COMJ. Serra, Bruno Castanié, Christophe Bouvet, C. Petiot. Discrete Ply Modelling analysis of notched CFRP under tension. ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, Porto, PT[HAL] / [BIB]
2015ACLHakim Abdulhamid, Christophe Bouvet, Laurent Michel, Jacky Aboissière, Clément Minot. Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP. Acta Materialia, Elsevier, vol. 68, pp. 110-120[HAL] / [BIB] / [DOI]
2014ACLNatthawat Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet, Arturo Miranda. Permanent indentation characterization for low-velocity impact modelling using three-point bending test. Journal of Composite Materials, SAGE Publications, 48(20), p.2441-2454[HAL] / [BIB] / [DOI]
2014ACLVictor Achard, Christophe Bouvet, Bruno Castanié, Clément Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures, Elsevier, vol. 113, pp. 369-381[HAL] / [BIB] / [DOI]
2014ACLSamuel Rivallant, Christophe Bouvet, Elias Abi Abdallah, Bernhard Broll, Jean-Jacques Barrau. Experimental analysis of CFRP laminates subjected to Compression After Impact: the role of impact-induced cracks in failure. Composite Structures, Elsevier, vol. 111, pp. 147-157[HAL] / [BIB] / [DOI]
2014ACLBenjamin Ostré, Christophe Bouvet, Frederic Lachaud, Clément Minot, Jacky Aboissière. Edge impact damage scenario on stiffened composite structure. Journal of Composite Materials, SAGE Publications, 42 p.[HAL] / [BIB] / [DOI]
2014ACLHaris Ahmad Israr, Samuel Rivallant, Christophe Bouvet, Jean-Jacques Barrau. Finite element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept. Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 62, pp. 16-25[HAL] / [BIB] / [DOI]
2014COMH. Abdulhamid, Christophe Bouvet, Laurent Michel, J. Aboissiere, C. Minot. INVESTIGATION OF IMPACT DAMAGE OF TAPERED COMPOSITE LAMINATES. ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June, Seville, ES[HAL] / [BIB]
2014COMT. Lisle, N. Hongkarnjanakul, Christophe Bouvet, Marie-Laetitia Pastor, Philippe Marguerès, Samuel Rivallant. Measure of fracture toughness in composite structures using Infrared Thermography. ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June, Seville, ES[HAL] / [BIB]
2014COMV. Achard, Christophe Bouvet, Bruno Castanié, C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy), Ischia, IT[HAL] / [BIB]
2014COMT. Lisle, Christophe Bouvet, Marie-Laetitia Pastor, Philippe Marguerès. An experimental study of damage evolution in 2D thin woven composite under quasi-static loading using infrared thermography. ECCM16, Seville, ES[HAL] / [BIB]
2014COMN. Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet. Modelling permanent indentation in composite subjected to impact : identification through a specific three-point bending test. ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June, Seville, ES[HAL] / [BIB]
2014ACLHaris Ahmad Israr, Natthawat Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet. Post-Impact Investigation of CFRP Laminated Plate. Jurnal Teknologi, 71(2), p.71-78[HAL] / [BIB] / [DOI]
2014COMChristophe Bouvet, T. Lisle, Marie-Laetitia Pastor, Philippe Marguerès. MESURE PAR THERMOGRAPHIE INFRAROUGE DU TAUX DE RESTITUTION D'ÉNERGIE CRITIQUE DANS UN STRATIFIÉ COMPOSITE: CAS DE LA RUPTURE DE FIBRES EN COMPRESSION. CILSA – Journée Instrumentation, traitement du signal et modélisation des sources acoutisques dans les matériaux composites, Lyon, FR[HAL] / [BIB]
2014COMChristophe Bouvet, Samuel Rivallant, J.-J. Barrau, N. Hongkarnjanakul, Bruno Castanié, H. Abdulhamid, T. Lisle, E. Abi Abdallah, B. Ostre, S. Petit. Discrete ply modelling of impact and compression after impact on composite laminates. Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July, Toulouse, FR[HAL] / [BIB]
2014ACLBenoît Vieille, Victor Manuel Casado, Christophe Bouvet. Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study. Composite Structures, Elsevier, vol. 110, pp. 207-218[HAL] / [BIB] / [DOI]
2013ACLAmélie Kolopp, Samuel Rivallant, Christophe Bouvet. Experimental study of sandwich structures as armour against medium-velocity impacts. International Journal of Impact Engineering, Elsevier, vol. 61, pp. 24-35[HAL] / [BIB] / [DOI]
2013ACLBelkacem Hachemane, Redouane Zitoune, Boudjema Bezzazi, Christophe Bouvet. Sandwich composites impact and indentation behaviour study. Composites Part B: Engineering, Elsevier, vol. 51, pp. 1-10[HAL] / [BIB] / [DOI]
2013ACLBenoît Vieille, Victor Manuel Casado, Christophe Bouvet. About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative study. Composite Structures, Elsevier, vol. 101, pp. 9-21[HAL] / [BIB] / [DOI]
2013ACLHakim Abdulhamid, Amélie Kolopp, Christophe Bouvet, Samuel Rivallant. Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact. International Journal of Impact Engineering, Elsevier, 51, p.1-12[HAL] / [BIB] / [DOI]
2013ACLTeddy Lisle, Christophe Bouvet, Marie-Laetitia Pastor, Philippe Marguerès, Roberto Prieto Corral. Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography. Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 53, pp. 75-87[HAL] / [BIB] / [DOI]
2013ACLSamuel Rivallant, Christophe Bouvet, Natthawat Hongkarnjanakul. Failure analysis of CFRP laminates subjected to Compression After Impact: FE simulation using discrete interface elements. Composites Part A: Applied Science and Manufacturing, Elsevier, vol. 55, pp. 83-93[HAL] / [BIB] / [DOI]
2013ACLNatthawat Hongkarnjanakul, Christophe Bouvet, Samuel Rivallant. Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure. Composite Structures, Elsevier, vol. 106, pp. 549-559[HAL] / [BIB] / [DOI]
2013COChristophe Bouvet, Natthawat Hongkarnjanakul, Samuel Rivallant, Jean-Jacques Barrau. Discrete Impact Modeling of Inter- and Intra-laminar Failure in Composites. 192[HAL] / [BIB] / [DOI]
2013ACLThomas Rouault, Christophe Bouvet, Vincent Nègre, Patrice Rauch. Reversible Rail Shear Apparatus Applied to the Study of Woven Laminate Shear Behavior. Experimental Mechanics, Society for Experimental Mechanics, 53(8), p.1437-1448[HAL] / [BIB] / [DOI]
2013ACLAmélie Kolopp, Raquel Alvarado, Samuel Rivallant, Christophe Bouvet. Modeling impact on aluminium sandwich including velocity effects in honeycomb core. Journal of Sandwich Structures and Materials, SAGE Publications, 13(6), p.733-757[HAL] / [BIB] / [DOI]
2012ACLLouis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures, Elsevier, vol. 94, pp. 3082-3091[HAL] / [BIB] / [DOI]
2012ACLChristophe Bouvet, Samuel Rivallant, Jean-Jacques Barrau. Low velocity impact modeling in composite laminates capturing permanent indentation. Composites Science and Technology, Elsevier, 72(16), p.1977-1988[HAL] / [BIB] / [DOI]
2012ACLPierre Rahmé, Christophe Bouvet, Samuel Rivallant, Valia Fascio, Guy Valembois. Experimental investigation of impact on composite laminates with protective layers. Composites Science and Technology, Elsevier, 72(2), p.182-189[HAL] / [BIB] / [DOI]
2012ACLAlvine Njionhou, Florentin Berthet, Bruno Castanié, Christophe Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. Applied Composite Materials, Springer Verlag (Germany), vol. 19, pp. 885-899[HAL] / [BIB] / [DOI]
2012COChristian Lexcellent, M. Lamine Boubakar, Christophe Bouvet, Sylvain Calloch. Modelling Shape Memory Alloy Behaviour under Proportional Loading and Anisothermal Conditions. Vol. 61/2012, pp. 163-174[HAL] / [BIB] / [DOI]
2011COMChristophe Bouvet. Dommages d'impact sur stratifié composite. 17èmes Journées Nationales sur les Composites (JNC17), p.206, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMThomas Rouault, Christophe Bouvet, Matthieu Bizeul, Vincent Nègre. Modélisation de la propagation d'une coupure sur stratifié mince de composite tissé soumis à un chargement cyclique de traction. 17èmes Journées Nationales sur les Composites (JNC17), p.68, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMK. Alvine Njionhou, Florentin Berthet, Bruno Castanié, Christophe Bouvet. Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus. 17èmes Journées Nationales sur les Composites (JNC17), p.32, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMLouis Adam, Christophe Bouvet, Bruno Castanié, Alain Daidié, Elodie Bonhomme. Modélisation par éléments cohésifs de l'essai d'arrachement de fixations dans un stratifié. 17èmes Journées Nationales sur les Composites (JNC17), p.22, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011COMAmélie Kolopp, Samuel Rivallant, Christophe Bouvet. Impact sur structures sandwich composites pour application de blindage aéronautique. 17èmes Journées Nationales sur les Composites (JNC17), p.70, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011ACLMatthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: experimental. Composites Science and Technology, Elsevier, 71(3), p.289-296[HAL] / [BIB] / [DOI]
2011COMAmir Shahdin, Joseph Morlier, Guilhem Michon, Laurent Mezeix, Christophe Bouvet, Yves Gourinat. Application of modal analysis for evaluation of the impact resistance of aerospace sandwich materials. IMAC XXIX, A Conference and Exposition on Structural Dynamics : Advanced Aerospace Applications, p.171-177, Jacksonville, US[HAL] / [BIB]
2011ACLMatthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: modelling. Composites Science and Technology, Elsevier, 71(3), p.297-305[HAL] / [BIB] / [DOI]
2011ACLMatthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: modelling. Composites Science and Technology, Elsevier, 71(3), p.297-305[HAL] / [BIB] / [DOI]
2011ACLAmir Shahdin, Joseph Morlier, Laurent Mezeix, Christophe Bouvet, Yves Gourinat. Evaluation of the impact resistance of various composite sandwich beams by vibration tests. Shock and Vibration, IOS Press, 18(6), p.789-805[HAL] / [BIB] / [DOI]
2010COMPierre Rahmé, Christophe Bouvet, Samuel Rivallant, Valia Fascio, Guy Valembois. Mechanical protection for composite structures submitted to low energy impact. ECCM14 - 14th European Conference on Composite Materials, Budapest, HU[HAL] / [BIB]
2010COMChristophe Bouvet, Samuel Rivallant, Jean-Jacques Barrau. Modelling of impact damage and permanent indentation on laminate composite plate. ECCM14 - 14th European Conference on Composite Materials, Budapest, HU[HAL] / [BIB]
2010ACLMatthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. International Journal of Fatigue, Elsevier, 32(1), p.60-65[HAL] / [BIB] / [DOI]
2010ACLMatthieu Bizeul, Christophe Bouvet, Jean-Jacques Barrau, Rémy Cuenca. Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. International Journal of Fatigue, Elsevier, 32(1), p.60-65[HAL] / [BIB] / [DOI]
2009ACLAmir Shahdin, Laurent Mezeix, Christophe Bouvet, Joseph Morlier, Yves Gourinat. Monitoring the effects of impact damages on modal parameters in carbon fiber entangled sandwich beams. Engineering Structures, Elsevier, 31(12), p.2833-2841[HAL] / [BIB] / [DOI]
2009ACLAmir Shahdin, Laurent Mezeix, Christophe Bouvet, Joseph Morlier, Yves Gourinat. Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams. Composite Structures, Elsevier, 9(4), p.404-412[HAL] / [BIB] / [DOI]
2009COMLaurent Mezeix, Christophe Bouvet, Dominique Poquillon. Matériaux élaborés à partir de fibres enchevêtrées pour une application coeur de structure sandwich = Porous materials made with entangled fibers network for an application as core material for sandwich structures. JNC 16, 9 p., Toulouse, FR[HAL] / [BIB]
2009COMLaurent Mezeix, Christophe Bouvet, Serge Crézé, Dominique Poquillon. Fibers networks as a new type of core material. Processing and mechanical properties. Materials Research Society (MRS) 2009, San Francisco, US[HAL] / [BIB]
2009ACLSandrine Petit, Christophe Bouvet, Alain Bergerot, Jean-Jacques Barrau. Impact and compression after impact experimental study of a composite laminate with a cork thermal shield. Composites Science and Technology, Elsevier, 67(15-16), p.3286[HAL] / [BIB] / [DOI]
2009ACLLaurent Mezeix, Christophe Bouvet, Julitte Huez, Dominique Poquillon. Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression. Journal of Materials Science, Springer Verlag, 44(14), p.3652-3661[HAL] / [BIB] / [DOI]
2009ACLChristophe Bouvet, Bruno Castanié, Matthieu Bizeul, Jean-Jacques Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements. International Journal of Solids and Structures, Elsevier, 46(14-15), p.2809-2821[HAL] / [BIB] / [DOI]
2008ACLBruno Castanié, Yulfian Aminanda, Christophe Bouvet, Jean-Jacques Barrau. CORE CRUSH CRITERION TO DETERMINE THE STRENGTH OF SANDWICH COMPOSITE STRUCTURES SUBJECTED TO COM-PRESSION AFTER IMPACT. Composite Structures, Elsevier, 86(1-3), p.243-250[HAL] / [BIB]
2008ACLBruno Castanié, Christophe Bouvet, Y. Aminanda, J.-J. J.-J. Barrau, P. Thevenet. Modelling of low energy/low velocity impact on Nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering, Elsevier, 35(7), p.620[HAL] / [BIB] / [DOI]
2006ACLC. Lexcellent, M. Boubakar, Christophe Bouvet, Sylvain Calloch. About modelling the shape memory alloy behaviour based on the phase transformation surface identification under proportional loading and anisothermal conditions. International Journal of Solids and Structures, Elsevier, 43, p.613-626[HAL] / [BIB]
2006ACLChristian Lexcellent, Lamine Boubakar, Christophe Bouvet, Sylvain Calloch. About modelling the shape memory alloy behaviour based on the phase transformation surface identification under proportional loading and anisothermal conditions. International Journal of Solids and Structures, Elsevier, 43((3-4)), pp. 613-626[HAL] / [BIB] / [DOI]
2005COMKarine Taillard, Sylvain Calloch, Christophe Bouvet, Christian Lexcellent. Modélisation des surfaces de début de transformation des AMF isotropes et anisotropes.[HAL] / [BIB]
2005COMKarine Taillard, Sylvain Calloch, Christian Lexcellent, Christophe Bouvet. Isothermal and anisothermal 3D behavior of shape memory alloys. EUROMAT 2005, Prague, CZ[HAL] / [BIB]
2005COMChristian Lexcellent, Lamine Boubakar, Sylvain Calloch, Pascal Blanc, Christophe Bouvet, Benoît Vieille, Karine Taillard. Modéliser le comportement thermomécanique des alliages à mémoire de forme pour leur utilisation comme éléments actifs ou passifs de structures.[HAL] / [BIB]
2005COMKarine Taillard, Sylvain Calloch, Christophe Bouvet, C. Lexcellent. Etude des surfaces de début de transformation des alliages à mémoire de forme anisotropes. CFM 2005 - XVIIe Congrès français de mécanique, Troyes, FR[HAL] / [BIB]
2004COMKarine Taillard, Sylvain Calloch, Christian Lexcellent, Christophe Bouvet. Determination and modeling of equivalent stress and equivalent transformation strain for polycrystalline textured shape memory alloys.[HAL] / [BIB]
2004APKarine Taillard, Sylvain Calloch, Christophe Bouvet, Christian Lexcellent. Determination of phase transformation yield surface of anisotropic shape memory alloys.[HAL] / [BIB]
2004COMChristophe Bouvet, Sylvain Calloch, Karine Taillard, Christian Lexcellent. Constitutive equations for pseudo-elastic behavior of shape memory alloys under multiaxial non proportional loadings. 7th Euromech-Mecamat Conference, J. de Phys. IV, Vol. 115, pp. 29-36, FR[HAL] / [BIB]
2004APChristian Lexcellent, Pascal Blanc, Karine Taillard, Sylvain Calloch, Christophe Bouvet. Phase transformation yield surface determination of isotropic and textured shape memory alloys.[HAL] / [BIB]
2004ACLChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial and non proportional loadings. European Journal of Mechanics - A/Solids, Elsevier, 23(1), p.37-61[HAL] / [BIB]
2003COMChristian Lexcellent, Lamine Boubakar, Christophe Bouvet, Sylvain Calloch. Modelling shape memory alloys behaviour under proportional loading and anisothermal conditions. Colloque Lagrangianum, Montpellier, FR[HAL] / [BIB]
2003COMChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. Approches expérimentales et théoriques du comportement thermomécanique sous chargement multiaxial d'alliages à mémoire de forme polycristallins. 1er Colloque Interaction Modèles-Expériences en Mécanique du Solide, Journal de Physique IV, Vol. 12, pp. 283-290, Besançon, FR[HAL] / [BIB]
2003ACLChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial and non proportional loadings. European Journal of Mechanics - A/Solids, Elsevier, 23, pp. 37-61[HAL] / [BIB]
2002COMSylvain Calloch, Christophe Bouvet, Christian Lexcellent. Effets de chargements multiaxiaux sur le comportement pseudoélastique d'AMF : expériences et modélisation. Colloquium Lagrangianum "Matériaux à fonctions multiples", Castel del Monte et Castello Svevo di Trani, IT[HAL] / [BIB]
2002COMChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. A phenomenological modeling for pseudoelastic behavior of SMA under multiaxial non proportional loadings. 3rd World Conference on Structural Control, Como, IT[HAL] / [BIB]
2002COMPascal Blanc, Christian Lexcellent, Christophe Bouvet, Alexandre Vivet. What about the yield transformation surface determination (austenite - martensite) with the measurement of austenite and martensite lattice parameters for some shape memory alloys ?. IUTAM, Vol. 114, "Multiscale modeling and characterisation of elastic-inelastic behavior of engineering materials", pp. 25-32, Marrakech, MA[HAL] / [BIB]
2002COMChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. Experimental and theoretical investigations of shape memory polycrystalline alloys thermomechanical behavior under multiaxial loadings. 3rd World Conference on Structural Control, Como, IT[HAL] / [BIB]
2002COMChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. A phenomenological model for a Cu Al Be shape memory alloy pseudoelasticity under complex loading. ICOMAT 2002, Espoo, FI[HAL] / [BIB]
2002ACLChristophe Bouvet, Sylvain Calloch, Christian Lexcellent. Mechanical behavior of a Cu-Al-Be shape memory alloys under multiaxial proportional and non proportional loadings. Journal of Engineering Materials and Technology, American Society of Mechanical Engineers, 124, pp. 112-124[HAL] / [BIB]
2002COMBenoît Vieille, Christophe Bouvet, Lamine Boubakar, Christian Lexcellent. Computational of shape memory alloys thermomechanical behaviour. 5th World Congress on Computational Mechanics, Vienne, AT[HAL] / [BIB]
2002ACLChristian Lexcellent, Alexandre Vivet, Christophe Bouvet, Sylvain Calloch, Pascal Blanc. Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape memory alloys. Journal of the Mechanics and Physics of Solids, Elsevier, 50, pp. 2717-2735[HAL] / [BIB]