Farhad Rézaï-Aria

Professeur - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (IMT Mines Albi)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi
 
    (recherche)

Production scientifique :
122 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019ACLE. Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, F. Touratier. A correlation between tribological behavior and crystal structure of cobalt-based hardfacings. Wear, Elsevier, 426-427(Part B), p.996-1007[HAL] / [BIB] / [DOI]
2019ACLChristine Boher, Vanessa Vidal, E. Cabrol, Y. Berthier, Farhad Rezai-Aria. Shear mode M3 in the first sites of ductile metallic alloys: Some considerations on the physical mechanisms leading to internal particle flows. Wear, Elsevier, 426-427(Part B), p.1152-1162[HAL] / [BIB] / [DOI]
2019ACLMehdi Salem, Sabine Le Roux, Gilles Dour, Pascal Lamesle, Karim Choquet, Farhad Rezai-Aria. Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications. International Journal of Fatigue, Elsevier, 119, p.126-138[HAL] / [BIB] / [DOI]
2019ACLFatna Benmessaoud, Vincent Velay, Mohammed Cheikh, Vanessa Vidal, Christine Boher, Farhad Rezai-Aria. Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy. Chemical Engineering Transactions, AIDIC, 67(2), p.227 - 242[HAL] / [BIB] / [DOI]
2019ACLGilles Dour, Mehdi Salem, Sabine Le Roux, Damien Texier, Farid Medjedoub, Pascal Lamesle, Farhad Rezai-Aria. AnT²COK, an analytical model for cyclic oxidation kinetics of hot-work tool steels in transient thermal cycling conditions. Corrosion Science, Elsevier, 147, p.169-181[HAL] / [BIB] / [DOI]
2018ACLK. Moussaoui, Walter Rubio, Michel Mousseigne, T. Sultan, Farhad Rezai-Aria. Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties. Materials Science and Engineering: A, Elsevier, 735, p.182 - 190[HAL] / [BIB] / [DOI]
2018COMF Benmessaoud, Mohammed Cheikh, Vincent Velay, Vanessa Vidal, Farhad Rezai-Aria, Christine Boher. SIMULATION MULTI-ECHELLE DU COMPORTEMENT MECANIQUE D’UN ALLIAGE DE TITANE TI-6AL-4V: Etude de L’influence de la Taille, la Dispersion Relative et la Texture Cristallographique des Grains. ICEMAEP2018, Constantine, DZ[HAL] / [BIB]
2018ACLRenaud Julien, Vincent Velay, Vanessa Vidal, Yoann Dahan, Romain Forestier, Farhad Rezai-Aria. Characterization and modeling of forged Ti-6Al-4V Titanium alloy with microstructural considerations during quenching process. International Journal of Mechanical Sciences, Elsevier, 142-143, p.456-467[HAL] / [BIB] / [DOI]
2017ACLR. Julien, Vincent Velay, Vanessa Vidal, Y. Dahan, R. Forestier, Farhad Rezai-Aria. Tensile behaviour of high temperature forged Ti-6Al-4V during in-situ heat treatments. Materials Letters, Elsevier, 208, p. 7-9[HAL] / [BIB] / [DOI]
2016COMA. Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria, Thomas Pottier, Mohammed Cheikh. Multi-scale Modelling of the Surface Behaviour of AISI H11 Tool Steels. TOOL 2016 - 10th TOOL Conference, 562 p., Bratislava, SK[HAL] / [BIB]
2016ACLAhmed Zouaghi, Vincent Velay, Adriana Soveja, Thomas Pottier, Mohammed Cheikh, Farhad Rezai-Aria. A multi-scale approach to investigate the non linear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis. International Journal of Plasticity, Elsevier, 87, p.130-153[HAL] / [BIB] / [DOI]
2016ACLAhmed Ktari, Nader Haddar, Farhad Rezai-Aria, Hassine Ferid Ayedi. On the assessment of train crankshafts fatigue life based on LCF tests and 2D-FE evaluation of J-integral. Engineering Failure Analysis, Elsevier, 66, p.354-364[HAL] / [BIB] / [DOI]
2016ACLFaisal Qayyum, Masood Shah, Osama Shakeel, Fariha Mukhtar, Mehdi Salem, Farhad Rezai-Aria. Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel. Engineering Failure Analysis, Elsevier, 62, p.242-263[HAL] / [BIB] / [DOI]
2016COME. Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, F. Touratier. Wear mechanisms of hardfaced aeronautical high temperature forging tools. ASMET - TOOL STEEL 2016, Bratislava, SK[HAL] / [BIB]
2016COMChristine Boher, Vanessa Vidal, Vincent Velay, Farhad Rezai-Aria, E. Cabrol, F. Touratier, B. Prouzet, O. Brucelle. Résultats tribologiques de dépôts obtenus par différentes techniques HVOF, MIG, PTA & LASER. 5e Conférence Internationale, de la projection thermique à la fabrication additive, 7 et 8 décembre - Pau- France - (2016), Pau, FR[HAL] / [BIB]
2016COMA. Zouaghi, Adriana Soveja, Farhad Rezai-Aria, Thomas Pottier, Mohammed Cheikh, Vincent Velay. Multi-scale surface modeling of the nonlinear mechanical behaviour of AISI H11 hot work tool steel. International Conference on Plasticity, Damage, and Fracture, Panama City, PA[HAL] / [BIB]
2015ACLMasood Shah, Catherine Mabru, Manel Baccar, Farhad Rezai-Aria. Normalization of fatigue crack growth data in AISI H11 tool steel at room and elevated temperature. International Journal of Damage Mechanics, 24(8), p.1111-1140[HAL] / [BIB] / [DOI]
2015ACLM. Shah, Catherine Mabru, Farhad Rezai-Aria. Characterisation of the surface damage of X38CrMoV5 (AISI H11) tool steel at room temperature and 600 degrees C. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 38(6), p. 742-754[HAL] / [BIB] / [DOI]
2015ACLElodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Franck Touratier. Plastic strain of cobalt-based hardfacings under friction loading. Wear, Elsevier, 330(SI), p. 354-363[HAL] / [BIB] / [DOI]
2015ACLF. Szmytka, Mehdi Salem, Farhad Rezai-Aria, A. Oudin. Thermal fatigue analysis of automotive Diesel piston: Experimental procedure and numerical protocol. International Journal of Fatigue, Elsevier, 73, p.48-57[HAL] / [BIB] / [DOI]
2015ACLKuniaki Dohda, Christine Boher, Farhad Rezai-Aria, Numpon Mahayotsanun. Tribology in metal forming at elevated temperatures. review. FRICTION, 3(1), p. 1-27[HAL] / [BIB] / [DOI]
2015COMR. Julien, Vincent Velay, Vanessa Vidal, Mehdi Salem, Y. Dahan, R. Forestier, Farhad Rezai-Aria. Thermomechanical behaviour and microstructural evolution of high temperature forged Ti-6Al-4V during heat treatment quenching. 12th International Conference on the Mechanical Behavior of Materials, Karlsruhe - GERMANY, Karlsruhe, NL[HAL] / [BIB]
2014COMAhmed Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria. A numerical investigation on the heterogeneous and anisotropic mechanical behaviour of AISI H11 steel using various stress-strain formulations : a multi-scale approach. WCCM - 11th World Congress on Computational Mechanics / ECCM - 5th European Conference on Computational Mechanics / ECFD - 6th European Conference on Computational Fluid Dynamics, p. 3415-3425, Barcelone, ES[HAL] / [BIB]
2014COMAhmed Zouaghi, Vincent Velay, Adriana Soveja, Farhad Rezai-Aria. Multi-scale modelling of AISI H11 martensitic tool steel surface anisotropic mechanical behaviour. FDMD II - JIP 2014 - FATIGUE DESIGN & MATERIAL DEFECTS, 12, art. 04018 - 2 p., Paris, FR[HAL] / [BIB] / [DOI]
2014ACLA. Ktari, M. Baccar, M. Shah, N. Haddar, H. F. Ayedi, Farhad Rezai-Aria. A crack propagation criterion based on Delta CTOD measured with 2D-digital image correlation technique. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 37(6), p. 682-694[HAL] / [BIB] / [DOI]
2014COMKarin Faria Pinho, Christine Boher, Yves Berthier, Cherlio Scandian, Farhad Rezai-Aria. Premiers mécanismes d'accommodation de vitesses actives dans un contact à haute température. Primary velocity accommodation mechanisms activated in a contact at high temperature. JIFT 2014 - 26èmes Journées Internationales Francophones de Tribologie, p.35-42, Mulhouse, FR[HAL] / [BIB]
2014COMPaul Le Baillif, Pascal Lamesle, Denis Delagnes, Vincent Velay, Christian Dumont, Farhad Rezai-Aria. Influence of the quenching rate and step-wise cooling temperatures on microstructural and tensile properties of PER72 (R) Ni-based superalloy. EUROSUPERALLOYS 2014 - 2nd European Symposium on Superalloys and their Applications, 14, art. 21002 - 6 p., Giens, FR[HAL] / [BIB] / [DOI]
2014ACLFarid Medjedoub, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Effect of local stress on the heat-checking morphology in high temperature tool steels under thermal fatigue: Transition from multi-axiality to uniaxiality. Mechanics of Materials, Elsevier, 69(1), p. 159-172[HAL] / [BIB] / [DOI]
2014ACLElodie Cabrol, Christine Boher, Vanessa Vidal, Farhad Rezai-Aria, Fabienne Touratier. A wear damage assessment of high temperature forging tool. Advanced Materials Research, Trans Tech Publications, 966-967, p.103-110[HAL] / [BIB] / [DOI]
2013ACLSabine Le Roux, Farhad Rezai-Aria. Topological and metric properties of microscopic crack patterns: application to thermal fatigue of high temperature tool steels. JOURNAL OF PHYSICS D‐APPLIED PHYSICS, 46(29)[HAL] / [BIB] / [DOI]
2013ACLMichel Chaussumier, Catherine Mabru, Majid Shahzad, Rémy Chieragatti, Farhad Rezai-Aria. A predictive fatigue life model for anodized 7050 aluminium alloy. International Journal of Fatigue, Elsevier, vol. 48, pp. 205-213[HAL] / [BIB] / [DOI]
2013ACLPauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. A phenomenological model of the third body particles circulation in a high temperature contact. Wear, Elsevier, 298-299, p.66-79[HAL] / [BIB] / [DOI]
2013ACLSabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria. Image analysis of microscopic crack patterns applied to thermal fatigue heat-checking of high temperature tool steels. Micron, Elsevier, 44, p.347-358[HAL] / [BIB] / [DOI]
2013ACLSabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria. Role of heat‐flux density and mechanical loading on the microscopic heat‐checking of high temperature tool steels under thermal fatigue experiments. International Journal of Fatigue, Elsevier, 51, p.15-25[HAL] / [BIB] / [DOI]
2013PA. Zouaghi, Vincent Velay, Adriana Soveja, R. Chieragatti, Farhad Rezai-Aria. Une étude multi-échelle du comportement en surface de l´acier X38CrMoV5 : approche numérique et expérimentale. 21ème CONGRÉS FRANÇAIS DE MÉCANIQUE [CFM2013], Bordeaux, FR[HAL] / [BIB]
2012COMPauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. Identification of the Velocity Accommodation Mechanisms in a High Temperature Contact. 9th International Tooling conference, p.455-462, Leoben, AT[HAL] / [BIB]
2012COMMehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Interaction between aluminizing, oxidation and thermal fatigue in aluminium die casting tool. TOOL 2012 - 9th International tooling conference, p.357-364, Leoben, AT[HAL] / [BIB]
2012COMManel Baccar, Sayyid Masoodur Rahman Shah, Vincent Velay, Catherine Mabru, Farhad Rezai-Aria. Analysis of crack propagation and crack tip opening displacements by measurements 2-D digital image correlation in a hot working tool steel. TOOL 2012 -9th International tooling conference, p.463-466, Leoben, AT[HAL] / [BIB]
2012ACLMasood Shah, Catherine Mabru, Farhad Rezai-Aria, Inès Souki, Riffat Asim Pasha. An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verification: case of FCGR of AISI H11 tool steel. ACTA METALLURGICA SINICA‐ENGLISH LETTERS, 25(4), p.307-319[HAL] / [BIB] / [DOI]
2012COMPauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. A phenomenological model of the third body particles circulation in a high temperature contact. Journées Internationales Francophones de Tribologie, aix-en-provence, FR[HAL] / [BIB]
2012COMManel Baccar, Sayyid Masoodur Rahman Shah, Catherine Mabru, Farhad Rezai-Aria. Investigation into the fatigue crack growth in hot work steel using crack tip opening displacement (CTOD). MED 2011 -1st International conference on Materials Environment and Durability, 3 p., Hammamet, TN[HAL] / [BIB]
2012ACLMajid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy. Surface and Coatings Technology, Elsevier, vol. 206, p.2733-2739[HAL] / [BIB]
2011COMPauline Lepesant, Christine Boher, Yves Berthier, Farhad Rezai-Aria. Modèle phénoménologique de circulation des particules d'usure dans un contact à haute température. Congrès MOULES &. OUTILS 2011, Albi, FR[HAL] / [BIB]
2011COMCatherine Vergne, Olivier Joos, Claude Gaspard, José Tinoco, Mohammed Moujib, Christine Boher, Farhad Rezai-Aria. Damage mechanisms of HSM work roll grades for roughing stands -Tribological approach. Abrasion 2011 -Abrasion wear resistant alloyed white cast irons for rolling and pulverizing mills, p.193-200, Liege, BE[HAL] / [BIB]
2011COMKhalil Ben Slima, Luc Penazzi, Catherine Mabru, François Ronde Oustau, Farhad Rezai-Aria. A New Method For Advanced Virtual Design Of Stamping Tools For Automotive Industry: Application To Nodular Cast Iron EN‐GJS‐600‐3. ESAFORM - 14th International Esaform conference on material forming, 1353, p.1713-1720, Belfast, IE[HAL] / [BIB] / [DOI]
2011ACLMajid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy. Materials and Design, Elsevier, 32(6), p.3328-3335[HAL] / [BIB] / [DOI]
2010COMMajid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Influence of anodizing process on fatigue life of a machined aluminium alloy. 10th International Fatigue Conference, 2(1), p.1015-1024, Prague, CZ[HAL] / [BIB] / [DOI]
2010COMMichel Chaussumier, M. Shahzad, Catherine Mabru, Rémy Chieragatti, Farhad Rezai-Aria. A fatigue multi‐site cracks model using coalescence, short and long crack growth laws, for anodized aluminum alloys. 10th International fatigue congress (FATIGUE 2010), 2(1), p.995-1004, Prague, CZ[HAL] / [BIB] / [DOI]
2010COMMasood Shah, Catherine Mabru, Farhad Rezai-Aria. Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures. 10th International Fatigue Congress (FATIGUE 2010), 2(1), p.2045-2054, Prague, CZ[HAL] / [BIB] / [DOI]
2010COMDenis Delagnes, Farhad Rezai-Aria, Christophe Levaillant. Influence of testing and tempering temperatures on fatigue behaviour, life and crack initiation mechanisms in a 5%Cr martensitic steel. FATIGUE 2010 - 10th International fatigue congress, 2(1), p.427-439, Prague, CZ[HAL] / [BIB] / [DOI]
2010COMJ. Rhismany, Christine Boher, Farhad Rezai-Aria. Etude des mécanismes et modélisation de l'usure de matériaux ductiles. Study and modeling of wear of ductile materials. JIFT 2010 - Journées Internationales Francophones de Tribologie, p.491-501, Albi, FR[HAL] / [BIB]
2010COMMichel Chaussumier, Majid Shahzad, Catherine Mabru, Rémy Chieragatti, Farhad Rezai-Aria. Modélisation de la multi-fissuration d’un alliage d’aluminium 7010 traité par oxydation anodique chromique. 29èmes journées de Printemps de la SF2M, "Influence des procédés sur la tenue en fatigue, rôle des défauts", Paris, FR[HAL] / [BIB]
2010ACLMajid Shahzad, Michel Chaussumier, Rémy Chieragatti, Catherine Mabru, Farhad Rezai-Aria. Influence of surface treatments on fatigue life of Al 7010 alloy. Journal of Materials Processing Technology, Elsevier, 210(13), p.1821-1826[HAL] / [BIB] / [DOI]
2009COMMichel Chaussumier, Majid Shahzad, Catherine Mabru, Rémy Chieragatti, Farhad Rezai-Aria. Influence du décapage sur la tenue en fatigue de l'alliage Al7010-T7451 traité par oxydation anodique chromique. CFM'09 -19ème Congrès Français de Mécanique, 6 p., Marseille, FR[HAL] / [BIB]
2009COMSabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria. Application of image analysis for thermal fatigue heat checking investigations. 8ITC -8th International Tooling Conference, 2, p.687-696, Aachen, DE[HAL] / [BIB]
2009COMMehdi Salem, Pascal Lamesle, Hicham Laribou, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and corrosion effects on non-isothermal fatigue of hot work tool steel X38CrMoV5 (AISI H11). 8ITC - 8th International Tooling Conference, 1, p.437-445, Aachen, DE[HAL] / [BIB]
2009COMMehdi Salem, Vincent Velay, Mohammed Cheikh, Gilles Dour, Pascal Lamesle, Farhad Rezai-Aria. Fatigue life modelling of hot forming tools. 8ITC - 8th International Tooling Conference, p.455-464, Aachen, DE[HAL] / [BIB]
2009COMMasood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SE(T) specimens. 8th International Tooling Conference (TOOL 2009), pp.1-9, Aachen, DE[HAL] / [BIB]
2009ACLC. Scandian, Christine Boher, J. D. B. Mello, Farhad Rezai-Aria. Effect of molybdenum and chromium contents in sliding wear of high‐chromium white cast iron: The relationship between microstructure and wear. Wear, Elsevier, 267(1-4), p.401-408[HAL] / [BIB] / [DOI]
2009ACLM. Shah, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria, Catherine Mabru. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens. REVUE DE METALLURGIE‐CAHIERS D INFORMATIONS TECHNIQUES, 106(3), p.140-145[HAL] / [BIB] / [DOI]
2009PSabine Le Roux, F. Medjedoub, G. Dour, Farhad Rezai-Aria. Application of image analysis for thermal fatigue heat checking investigations. 8th International Tooling Conference, Aachen, DE[HAL] / [BIB]
2009ACLMasood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. Crack Propagation in Tool Steel X38CrMoV5 (AISI H11) in SET Specimens. Advanced Engineering Materials, Wiley-VCH Verlag, 11(9), p.746-749[HAL] / [BIB] / [DOI]
2009ACLChristine Boher, Olivier Barrau, R. Gras, Farhad Rezai-Aria. A wear model based on cumulative cyclic plastic straining. Wear, Elsevier, 267(5-8), p.1087-1094[HAL] / [BIB] / [DOI]
2009ACLKatia Mocellin, Matthieu Ferraro, Vincent Velay, Roland E. Logé, Farhad Rezai-Aria. Numerical life prediction of mechanical fatigue for hot forging tools. International Journal of Material Forming, Springer Verlag, 2(Supplement 1), p.Pages 129-132[HAL] / [BIB] / [DOI]
2008COMMasood Shah, Catherine Mabru, Christine Boher, Sabine Le Roux, Farhad Rezai-Aria. An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens. JIP 2008 international conference on fatigue and plasticity : from mechanisms to design, pp. 1-8, Paris, FR[HAL] / [BIB]
2008COMPascal Lamesle, Mehdi Salem, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and Corrosion Effects on Thermal Fatigue Behaviour of Hot Work Tool Steel X38CrMoV5 (AISI H11). 7th International symposium on high-temperature corrosion and protection of materials, 595-598, p.789 - 796, Les Embiez, FR[HAL] / [BIB] / [DOI]
2008COMPascal Lamesle, Mehdi Salem, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and corrosion effects on thermal fatigue behaviour of hot work tool steel X38CrMoV5 (AISI H11). HTCPM 2008 - 7th International Symposium on High Temperature Corrosion and Protection of Materials, 7 p., Les Embiez, FR[HAL] / [BIB]
2008COMMasood Shah, Christine Boher, Farhad Rezai-Aria, Catherine Mabru. Propagation de fissure sur X38CrMoV5 sur éprouvettes à l'échelle réduite. Colloque National MECAMAT Procédés de transformation des matériaux de structure, p.1-4, Aussois, FR[HAL] / [BIB]
2008ACLJihad Rishmany, Catherine Mabru, Rémy Chieragatti, Farhad Rezai-Aria. Simplified modelling of the behaviour of 3D-periodic structures such as aircraft heat exchangers. International Journal of Mechanical Sciences, Elsevier, 5(6), p.1114-1122[HAL] / [BIB] / [DOI]
2008ACLZ. Ahmer, Vincent Velay, Gérard Bernhart, Farhad Rezai-Aria. Cyclic behaviour simulation of X38CRMOV5-47HRC (AISI H11)-tempered martensitic hot-work tool steel. International Journal of Microstructure and Materials Properties, Inderscience, 3(2/3), p.326-335[HAL] / [BIB] / [DOI]
2008ACLFarid Medjedoub, Gilles Dour, Sabine Le Roux, Pascal Lamesle, Mehdi Salem, Patrick Hairy, Farhad Rezai-Aria. Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). International Journal of Microstructure and Materials Properties, Inderscience, 3(2/3), p.336-349[HAL] / [BIB] / [DOI]
2008ACLGilles Dour, Farid Medjedoub, Gabriel Diaconu, Denis Girardin, Abderrahim Michrafy, Tahar Loulou, Farhad Rezai-Aria. Size effect in transient thermal fatigue testing and thermo-mechanical screening of coatings. International Journal of Microstructure and Materials Properties, Inderscience, 3(2-3), p.311-325[HAL] / [BIB] / [DOI]
2008ACLChristophe Daffos, Pascal Lamesle, Farhad Rezai-Aria. Fatigue-oxidation interaction models for life prediction of hot forming tools steels under transient thermomechanical loadings. International Journal of Microstructure and Materials Properties, Inderscience, 3(2-3), p.350-362[HAL] / [BIB]
2007COMAlexis Oudin, Farhad Rezai-Aria. Crack propagation in a 5Cr-Mo-V martensitic hot work tool steel under thermo-mechanical fatigue loading. JP 2007 -26èmes Journées de printemps, p.191-198, Paris, FR[HAL] / [BIB]
2007COMMehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Environmental effects on thermal fatigue damage of a low-Si tempered martensitic hot work tool steel X38CrMoV5 (AISI H13). JP 2007 - 26èmes Journées de printemps, p.37-43, Paris, FR[HAL] / [BIB]
2007COMPascal Lamesle, Julien Maury, Sabine Le Roux, Farhad Rezai-Aria. Monitoring distorsions of metallic parts during quenching. 5th International conference and european conference on heat treatment 2007, p.191-198, Berlin, DE[HAL] / [BIB]
2007COMSabine Le Roux, Farid Medjedoub, Gilles Dour, Farhad Rezai-Aria, Patrick Hairy. A methodology for thermal fatigue damage characterisation on hot forming tool steels. MECAMAT 2007, 4 p., Aussois, FR[HAL] / [BIB]
2007COMMehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Effet de l'environnement sur la fissuration par fatigue thermique d'aciers à outils pour travail à chaud X38CrMoV5 47HRC (AISI H11). MECAMAT 2007, 4 p., Aussois, FR[HAL] / [BIB]
2007ACLFarhad Rezai-Aria, Christine Boher, Gilles Dour, Pascal Lamesle, Sabine Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(18), 8 p.[HAL] / [BIB]
2007ACLPascal Lamesle, Sabine Le Roux, Farhad Rezai-Aria. Monitoring distorsions of metallic parts during quenching. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(18), 12 p.[HAL] / [BIB]
2007ACLMehdi Salem, Pascal Lamesle, Hicham Laribou, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Effet de l'environnement sur l'endommagement par fatigue thermique des aciers à outils pour travail à chaud X38CrMoV5 (AISI H11). Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(18), 5 p.[HAL] / [BIB]
2007ACLAnwar Hamasaiid, M.S. Dargusch, C. Davidson, Tahar Loulou, Farhad Rezai-Aria, Gilles Dour. Effect of Mold Coating Materials and Thickness on Heat Transfer in Permanent Mold Casting of Aluminium Alloys. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 38(6), pp. 1303-1316[HAL] / [BIB] / [DOI]
2007ACLO. Joos, Christine Boher, C. Vergne, C. Gaspard, T. Nylen, Farhad Rezai-Aria. Assessment of oxide scales influence on wear damage of HSM work rolls. Wear, Elsevier, 263(1), p.198-206[HAL] / [BIB] / [DOI]
2007ACLOlivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. Wear mechanisms and wear rate in a high temperature dry friction of AISI H11 tool steel : influence of debris circulation. Wear, Elsevier, 263(1-6), p.160-168[HAL] / [BIB] / [DOI]
2006COMGilles Dour, Farid Medjedoub, Gabriel Diaconu, Denis Girardin, Abderrahim Michrafy, Tahar Loulou, Farhad Rezai-Aria. Size effect in transient thermal fatigue testing and thermo-mechanical screening of coatings. TOOL 06 -7th International tooling conference, 2, p.555-562, Torino, IT[HAL] / [BIB]
2006COMJens Bergstrom, Farhad Rezai-Aria. High temperature fatigue of tool steels. TOOL 06 -7th International tooling conference, 2, p.545-554, Torino, IT[HAL] / [BIB]
2006COMChristophe Daffos, Pascal Lamesle, Farhad Rezai-Aria. Fatigue-oxidation interaction models for life prediction of hot forming tools steels under transient thermomechanical loadings. TOOL 06 -7th International tooling conference, 2, p.471-478, Torino, IT[HAL] / [BIB]
2006COMZeeshan Ahmer, Vincent Velay, Gérard Bernhart, Farhad Rezai-Aria. Cyclic behaviour simulation of X38CrMoV5-47HRC (AISI H11) tempered martensitic hot work tool steel. TOOL 06-7e International tooling conference, 2, p.513-520, TORINO, IT[HAL] / [BIB]
2006COMOlivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. A wear model based on tribological transformations of surfaces. TOOL 06 -7th International tooling conference, 2, p.175-180, Torino, IT[HAL] / [BIB]
2005COMGabriel Diaconu, Tahar Loulou, Abderrahim Michrafy, Farhad Rezai-Aria, Denis Girardin, Gilles Dour. A normalized approach to optimize the coating/substrate couples with regards to thermal stresses : conditions for thermo-mechanical screening. 6th International Congress on Thermal Stresses, 1, p.111-114, Vienna, AT[HAL] / [BIB]
2005COMOlivier Barrau, Christine Boher, René Gras, Farhad Rezai-Aria. Identification d'un modèle d'usure basé sur les transformations tribologiques de surfaces / Identification of a wear model based on the tribological transformations of surfaces. JIFT 2005 -Journées Internationales Francophones de Tribologie, p.211-218, Tarbes, FR[HAL] / [BIB]
2005ACLFarid Medjedoub, Gilles Dour, Farhad Rezai-Aria, Patrick Hairy. Endommagement par faïençage des moules de fonderie sous pression en fatigue thermique : origines, mécanismes et approches. Damage to die casting dies through crazing by thermal fatigue : origins, mechanisms and approaches. Fonderie, Fondeur d'aujourd'hui, Editions techniques des industries de la fonderie, p.22-36[HAL] / [BIB]
2005ACLGilles Dour, Farid Medjedoub, Sabine Le Roux, Gabriel Diaconu, Farhad Rezai-Aria. Normalized thermal stresses analysis to design a thermal fatigue experiment. JOURNAL OF THERMAL STRESSES, 28(1), p.1-16[HAL] / [BIB] / [DOI]
2004COMGilles Dour, Dargusch Matthew, Davidson Cameron, Anwar Hamasaiid, Farid Medjedoub, Farhad Rezai-Aria. La fonderie sous pression d'aluminium, grande vitesse de remplissage, forts gradients thermiques et fatigue thermique. Journée d'étude thématique SF2M Ouest, p. 12-13, Nantes, FR[HAL] / [BIB]
2003COMFarhad Rezai-Aria, Farid Medjedoub, Sabine Le Roux, Gilles Dour, Patrick Hairy, H. Khang Ny, M. Golin. An investigation of thermal fatigue surface cracking of X38CrMoV5 die tool steels. NADCA 2003 -Die casting in the heartland : 22nd International Die Casting Congress and Exposition, p.363-368, Indianapolis, US[HAL] / [BIB]
2003ACLOlivier Barrau, Christine Boher, R Gras, Farhad Rezai-Aria. Analysis of the friction and wear behaviour of hot work tool steel for forging. Wear, Elsevier, 255(7-12), p.1444-1454[HAL] / [BIB] / [DOI]
2002COMOlivier Barrau, Christine Boher, Catherine Vergne, Farhad Rezai-Aria, René Gras. Investigations of friction and wear mechanisms of hot forging tool steels. 6th international tooling conference, 1, p.81-94, Karlstad, SE[HAL] / [BIB]
2002COMChristophe Daffos, Pascal Lamesle, Farhad Rezai-Aria. Isothermal high temperature low cycle fatigue of 5% CrMoV tool nitrided steels. CAMP2002 -Conferences on applied mechanics, materials science and joining and forming processes, p.56-63, Paderborn, DE[HAL] / [BIB]
2002COMRémy Chieragatti, Catherine Mabru, Christine Espinosa, Farhad Rezai-Aria. A new specimen for fatigue investigations. CAMP2002 -Conferences on applied mechanics, materials science and joining and forming processes, p.207-213, Paderborn, DE[HAL] / [BIB]
2002ACLFarhad Rezai-Aria. Sollicitations thermomécaniques des outillages de forge à chaud. Traitement Thermique, p.38-40[HAL] / [BIB]
2001COMAlexis Oudin, Pascal Lamesle, Luc Penazzi, Sabine Le Roux, Farhad Rezai-Aria. Thermomechanical fatigue behaviour and life assessment of hot work tool steels. SF2M 9th international conference on temperature-fatigue interaction, p.195-201, Paris, FR[HAL] / [BIB]
2001COMBrice Miquel, Sylvain Jean, Sabine Le Roux, Pascal Lamesle, Farhad Rezai-Aria. Heat-checking of hot work tool steels. SF2M 9th international conference on temperature-fatigue interaction, p.185-193, Paris, FR[HAL] / [BIB]
2001COMAlexis Oudin, Farhad Rezai-Aria. Propagation de fissures dans un acier martensitique 5Cr-Mo-V sous sollicitations thermo-mécaniques. MECAMAT, p.239-242, Aussois, FR[HAL] / [BIB]
2000COMA Oudin, Farhad Rezai-Aria. Temperature dependence of thermo‐mechanical fatigue behaviour of a martensitic 5 % chromium steel. Euromat 2000, p.1053-1058, Tours, FR[HAL] / [BIB]
2000COMAlexis Oudin, Farhad Rezai-Aria. Fatigue thermo-mécanique d'un acier martensitique à 5% de chrome. MECAMAT, 4 p., Aussois, FR[HAL] / [BIB]
2000ACLGilles Dour, A. Broucaret, Alexis Oudin, Abderrahim Michrafy, Farhad Rezai-Aria. Rôle du poteyage et de la température initiale du moule sur les sollicitations thermomécaniques des moules permanents de fonderie. Matériaux & Techniques, EDP Sciences, p.45-50[HAL] / [BIB]
2000ACLAlexis Oudin, Luc Penazzi, Farhad Rezai-Aria. Life prediction of hot work tool steels subjected to thermomechanical fatigue. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(1), p.VII1-VII7[HAL] / [BIB]
2000ACLSylvain Jean, Brice Miquel, Farhad Rezai-Aria, Christophe Levaillant. Nouvellle loi phénoménologique de l'adoucissement d'un acier à outil au cours du revenu, application en fatigue thermique. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(1), p.V1-V8[HAL] / [BIB]
1999COMN. Roustit, Dorian Garcia, Jean-José Orteu, Farhad Rezai-Aria. Monitoring of in-plane cracking using correlation-based image processing : preliminary results. International workshop on video-controlled materials testing and in-situ microstructural characterization, p.161-164, Nancy, FR[HAL] / [BIB]
1999COMDenis Delagnes, Farhad Rezai-Aria, Christophe Levaillant, André Grellier. Influence of temperature and initial hardness on fatigue behaviour and life of a 5% cr hot work tool steel. 5th International conference on tooling, p.195-204, Leoben, AT[HAL] / [BIB]
1999COMSylvain Jean, Brice Miquel, Sabine Le Roux, Farhad Rezai-Aria. An investigation on heat checking of hot work tool steels. 5th International conference on tooling, p.185-193, Leoben, AT[HAL] / [BIB]
1999COMAlexis Oudin, Farhad Rezai-Aria. Thermo-mechanical fatigue behavior of a tempered martensitic 5 % chromium steel. 5th International conference on tooling, p. 769-777, Leoben, AT[HAL] / [BIB]
1999COMChristophe Levaillant, Farhad Rezai-Aria. Some aspects of heat checking of hot work tool steels. Korean-french international joint workshop on metal forming, p.65-70, Taejon, KR[HAL] / [BIB]
1999COMA Oudin, B Miquel, Farhad Rezai-Aria. A comparison between thermo‐mechanical fatigue of 5 % and 9 % chromium steels. Eight international conference on mechanical behaviour of materials ICM 8, p.381-386, Victoria, CA[HAL] / [BIB]
1999COMGérard Bernhart, Philippe Lours, Farhad Rezai-Aria, Christophe Levaillant. Effet de la thermique transitoire sur l'endommagement des outillages dans les procédès de formage. Journée de la société française des thermiciens, 8 p., Paris, FR[HAL] / [BIB]
1999ACLDenis Delagnes, Farhad Rezai-Aria, Christophe Levaillant, André Grellier. Comportement et durée de vie en fatigue isotherme de l'acier X 38 CrMoV 5. Matériaux & Techniques, EDP Sciences, p. 39-50[HAL] / [BIB]
1999ACLSylvain Jean, Jean-Paul Arcens, Serge Tovar, Farhad Rezai-Aria. Fatigue thermique des aciers à outils pour travail à chaud. Matériaux & Techniques, EDP Sciences, p. 23-29[HAL] / [BIB]
1998COMFarhad Rezai-Aria, Cc Engler‐pinto. Thermo‐mechanical fatigue investigation of single crystal nickel base superalloy SRR99. THERMO‐MECHANICAL FATIGUE BEHAVIOR OF MATERIALS, 1371, p.150-164, Norfolk, US[HAL] / [BIB] / [DOI]
1998COMG Filacchioni, C Petersen, Farhad Rezai-Aria, J Timm. A European round robin in thermo‐mechanical fatigue behavior of a 9% Cr low activation ferrite‐martensite steel. THERMO‐MECHANICAL FATIGUE BEHAVIOR OF MATERIALS, 1371, p.239-256, Norfolk, US[HAL] / [BIB] / [DOI]
1998ACLS. Dalmayrac, Farhad Rezai-Aria, Serge Tovar, Gilles Dour, E. Darsy, D. Massinon. Etude comparative d'aciers pour coquilles de coulée basse pression d'aluminium. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 16(17), p.15.2-15.8[HAL] / [BIB]
1998ACLDenis Delagnes, Farhad Rezai-Aria, Christophe Levaillant, André Grellier. Comportement et durées de vie en fatigue isotherme de l'acier Z 38 CDV 5. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 16(17), p.11.1-11.10[HAL] / [BIB]
1998ACLSylvain Jean, Farhad Rezai-Aria, Jean-Paul Arcens, Serge Tovar. Fatigue thermique des aciers à outils de forge à chaud. Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 16(17), p.8.2-8.9[HAL] / [BIB]