Gilles Dusserre

Maître assistant - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (IMT Mines Albi)
Membre du groupe Matériaux et Structures Composites (MSC)
Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi
 
    (recherche)
Activités de recherche :

Matériaux composites obtenus par la voie liquide (matrice thermodurcissables et inorganiques) : relations matériau, procédé, propriétés (mécaniques et thermiques)
Comportement viscoplastique des matériaux hétérogènes



Activités d'enseignement :

CAO, calcul de structures, simulation des procédés de mise en forme



Production scientifique :
57 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019PFlorian Boutenel, Anne Aimable, Gilles Dusserre, Thierry Cutard, Thierry Chartier. Formulation of oxide suspensions for liquid processing of ceramic matrix composites. HT-CMC 10 - 10th International Conference on High Temperature Ceramic Matrix Composites, Bordeaux, FR[HAL] / [BIB]
2019PFlorian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte. JNC 21 : Journées Nationales sur les Composites 2019, Bordeaux, FR[HAL] / [BIB]
2019COMFlorian Boutenel, Gilles Dusserre, Thierry Cutard. Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte. JNC 21 : Journées Nationales sur les Composites 2019, Bordeaux, FR[HAL] / [BIB]
2019ACLDamien Mauduit, Gilles Dusserre, Thierry Cutard. Influence of temperature cycles on strength and microstructure of spray-deposited Si-Al CE9F alloy. Mechanics of Materials, Elsevier, 131, p.93-101[HAL] / [BIB] / [DOI]
2018ACLFenglin Liang, Martial Sauceau, Gilles Dusserre, Jean-Louis Dirion, Patricia Arlabosse. Modelling of the rheological behavior of mechanically dewatered sewage sludge in uniaxial cyclic compression. Water Research, IWA Publishing, 147, p.413-421[HAL] / [BIB] / [DOI]
2018COMWilliam Han, Florentin Berthet, Gilles Dusserre, Fabrice Schmidt. Modelling the shape of an adhesive joint during assembly. Modélisation de la forme d'un joint d'adhésif pendant l'assemblage. ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Tarbes, FR[HAL] / [BIB]
2018ACLd'Elia Raffaele, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cédric Descamps, Thierry Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system. Polymer Engineering and Science, Wiley-Blackwell, 58(6), p.859-869[HAL] / [BIB] / [DOI]
2018ASCLRogelio Cecena, Benjamin Boniface, Gilles Dusserre. Process optimization for high-temperature aerospace applications. JEC Composites Magazine, JEC Group, p.27-29[HAL] / [BIB]
2018COMLaure Moretti, Gilles Dusserre, Bruno Castanié, Philippe Olivier. Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens. ECCM18 - 18th European Conference on Composite Materials, 8 p., Athènes, GR[HAL] / [BIB]
2017COMLilia Zemni, Gilles Dusserre, Gérard Bernhart, Benjamin Boniface. Etude cinétique de la réticulation d'une résine Cyanate Ester. Journées Nationales sur les Composites 2017, 77455 Champs-sur-Marne, FR[HAL] / [BIB]
2017COMFenglin Liang, Martial Sauceau, Gilles Dusserre, Jean-Louis Dirion, Patricia Arlabosse. Identification of the rheological properties of mechanically dewatered sewage sludge from uniaxial compression tests. SLUDGETECH 2017 - The IWA Specialist Conference on Sludge Management, 11 p., London, GB[HAL] / [BIB]
2017COMLilia Zemni, Gilles Dusserre, Gérard Bernhart, Benjamin Boniface. A study of cross-linking kinetics of cyanate ester resin. ICCM 21 - 21th International Conference on Composite Materials, Xi'an, CN[HAL] / [BIB]
2017ACLJacques Poirier, Eric Blond, Emmanuel de Bilbao, Rudy Michel, Antoine Coulon, Jean Gillibert, Michel Boussuge, Yang Zhang, David Ryckelynck, Gilles Dusserre, Thierry Cutard, Paul Leplay. New advances in the laboratory characterization of refractories : testing and modelling. Metallurgical Research & Technology, EDP Sciences, 114(6), art. 610 - 16 p.[HAL] / [BIB] / [DOI]
2017ACLM.-Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. BEM computation of 3D Stokes flow including moving front. International Journal of Material Forming, Springer Verlag, 10(4), p.567-580[HAL] / [BIB] / [DOI]
2017ACLFenglin Liang, Martial Sauceau, Gilles Dusserre, Patricia Arlabosse. A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge. Water Research, IWA Publishing, 113, p.171-180[HAL] / [BIB] / [DOI]
2016ACLGilles Dusserre, Olivier Valentin, Fabien Nazaret, Thierry Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 degrees C. Journal of the European Ceramic Society, Elsevier, 36(10), p. 2627-2639[HAL] / [BIB] / [DOI]
2016ACLRaffaele d'Elia, Gilles Dusserre, Sylvie del Confetto, Nicolas Eberling-Fux, Cedric Descarnps, Thierry Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling. European Polymer Journal, Elsevier, 76, p. 40-52[HAL] / [BIB] / [DOI]
2016ACLDamien Mauduit, Gilles Dusserre, Thierry Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines. Materials and Design, Elsevier, 95, p. 441-421[HAL] / [BIB] / [DOI]
2015COMDamien Mauduit, Gilles Dusserre, Thierry Cutard. Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract). International Conference on Composites and Nano Engineering, Chengdu, CN[HAL] / [BIB]
2015ACLGilles Dusserre. Modelling the hysteretic wale-wise stretching behaviour of technical plain knits. European Journal of Mechanics - A/Solids, Elsevier, 51, p. 160-171[HAL] / [BIB] / [DOI]
2015COGilles Dusserre, Gérard Bernhart. Knitting processes for composites manufacture. p.27-53[HAL] / [BIB] / [DOI]
2015ACLJérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Jean Frédéric Dalmasso. Numerical simulation of extruded clay paste compression. International Journal of Material Forming, Springer Verlag, 8(1), p.111-118[HAL] / [BIB] / [DOI]
2014ACLLaurent Robert, Gilles Dusserre. Assessment of Thermoset Cure-Induced Strains by Fiber Bragg Grating Sensor. Polymer Engineering and Science, Wiley-Blackwell, 54(7), p. 1585-1594[HAL] / [BIB] / [DOI]
2014ACLLaurent Robert, Gilles Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer. Polymer Engineering and Science, Wiley-Blackwell, 54(3), p. 626-635[HAL] / [BIB] / [DOI]
2014ACLGilles Dusserre, Laura Balea, Gérard Bernhart. Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching. A coupled semi-analytical model. Composites Part A: Applied Science and Manufacturing, Elsevier, 64, p.185 - 193[HAL] / [BIB] / [DOI]
2014ACLLaura Balea, Gilles Dusserre, Gérard Bernhart. Mechanical behaviour of plain-knit reinforced injected composites : effect of inlay yarns and fibre type. Composites Part B: Engineering, Elsevier, 56, p.20-29[HAL] / [BIB] / [DOI]
2014COMM.Q. Thai, Fabrice Schmidt, Gilles Dusserre, Arthur Cantarel, L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation. International conference on COmputational methods in Manufacturing Processes, Saint-Etienne, FR[HAL] / [BIB]
2013ACLRenaud Gantois, Arthur Cantarel, Benoit Cosson, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes. Polymer Composites, Wiley, 34(8), p.1235-1244[HAL] / [BIB] / [DOI]
2013ACLGilles Dusserre, F. Nazaret, Laurent Robert, Thierry Cutard. Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests. Journal of the European Ceramic Society, Elsevier, 33(2), p.221-231[HAL] / [BIB] / [DOI]
2013COMAnaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique. Processing and characterization of innovative glass-ceramic matrix composites. JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR[HAL] / [BIB]
2013COMBénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Etude et simulation de la conductivité thermique de matériaux composites à matrice organique. Study and simulation of thermal conductivity of organic matrix composites. JNC 18 - 18èmes Journées Nationales sur les Composites, 10 p., Nantes, FR[HAL] / [BIB]
2013COMBénédicte Reine, Jérémy Di Tomasou, Gilles Dusserre, Philippe Olivier. Study and simulation of thermal conductivity of organic matrix composites. ICCM 19 - 19th International Conference on Composite Materials, p.3587-3596, Montreal, CA[HAL] / [BIB]
2013COMJérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Jean Frederic Dalmasso. Effect of moisture on the behaviour of an extruded clay paste. ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, 554-557, p.2230-2236, Aveiro, PT[HAL] / [BIB] / [DOI]
2013COMAnaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin, Stéphanie Fouquet. Innovative glass-ceramic matrix composites : processing and characterization. ICCM 19 - 19th International Conference on Composite Materials, p.6251-6259, Montreal, CA[HAL] / [BIB]
2012COMAnaïs Farrugia, Gilles Dusserre, Thierry Cutard, Magali Rollin. Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system. ECCM 15 -15th European Conference on Composite Materials, 7 p., Venice, IT[HAL] / [BIB]
2012COMPascal Beneditti, Gilles Dusserre, Thierry Cutard, Juliette Huez. Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications. FPCM 11 -11th International conference on Flow Processes in Composite Materials, p.180-187, Auckland, NZ[HAL] / [BIB]
2012COMGilles Dusserre. Elastic properties of short fibres reinforced polymers in the vicinity of a weld line. FPCM 11 -11th International conference on Flow Processes in Composite Materials, p.362-369, Auckland, NZ[HAL] / [BIB]
2012COMJérémie Vignes, Fabrice Schmidt, Gilles Dusserre, Olivier de Almeida, Jean Frederic Dalmasso. Numerical simulations of clay tiles compression. ESAFORM 2012 - 15th International ESAFORM Conference on material forming, 504-506, p.1403-1408, Erlangen, DE[HAL] / [BIB] / [DOI]
2012COMBénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Study of thermal behaviour of thermoset polymer matrix filled with micro and nanoparticles. ECCM 15 -15th European Conference on Composite Materials, 9 p., Venice, IT[HAL] / [BIB]
2012PA. Farrugia, Gilles Dusserre, Thierry Cutard, M. Rollin. Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system. ECCM 15 - 15th European Conference on Composite Materials, Venise (Italy), Venise, IT[HAL] / [BIB]
2012COML. Robert, Gilles Dusserre. Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors. European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre, Toulouse, FR[HAL] / [BIB]
2012COMO. Valentin, Gilles Dusserre, Thierry Cutard, F. Nazaret. Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model. EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany), Aachen, DE[HAL] / [BIB]
2012COMGilles Dusserre, Thierry Cutard. Comportement non-linéaire de bétons réfractaires renforcés de fibres.. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012., Mons, FR[HAL] / [BIB]
2011ACLGilles Dusserre, Gérard Bernhart, Fabrice Schmidt, Gilles Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests. Journal of Non-Newtonian Fluid Mechanics, Elsevier, 166(21-22), p.1229-1238[HAL] / [BIB] / [DOI]
2011COMLaura Balea, Gilles Dusserre, Gérard Bernhart. Composites à renfort tricoté : Relations entre contexture, nature du renfort et propriétés mécaniques du composite infusé. 17èmes Journées Nationales sur les Composites (JNC17), p.139, Poitiers-Futuroscope, FR[HAL] / [BIB]
2011ACLRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean Noel Félices, Fabrice Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method. Applied Mechanics and Materials, Trans Tech Publications, 62, p.57-65[HAL] / [BIB] / [DOI]
2011ACLGilles Dusserre, Eric Jourdain, Gérard Bernhart. Effect of deformation on knitted glass preform in-plane permeability. Polymer Composites, Wiley, 32(1), p.18-28[HAL] / [BIB] / [DOI]
2010COMRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method. ESAFORM 2010 -13th International ESAFORM conference on material forming, 4 p., Brescia, IT[HAL] / [BIB]
2010COMLaura Balea, Gilles Dusserre, Gérard Bernhart, Nicolas Dumont. Effect of inlay fibres on the behaviour of dry knitted fabrics and resulting composites. ECCM 14 -14th European Conference on Composite Materials, 10 p., Budapest, HU[HAL] / [BIB]
2010COMGilles Dusserre, Laura Balea, Naoufel Ben Salem, Gérard Bernhart. Influence of knitted reinforcement on the composite mechanical behaviour. ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA[HAL] / [BIB]
2010COMRenaud Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method. ACMA 2010 -International symposium on composites and aircraft materials, 8 p., Marrakech, MA[HAL] / [BIB]
2010ACLR. Gantois, Arthur Cantarel, Gilles Dusserre, Jean-Noël Felices, Fabrice Schmidt. Numerical simulation of resin transfer molding using BEM and level set method. International Journal of Material Forming, Springer Verlag, 3(Supp 1), p.635-638[HAL] / [BIB] / [DOI]
2009COMLaura Balea, Gilles Dusserre, Gérard Bernhart, Nicolas Dumont. Comportement mécanique de textiles tricotés techniques pour des applications composites = Mechanical behaviour of technical knitted fabrics for composite applications. JNC 16, 10 p., Toulouse, FR[HAL] / [BIB]
2009ACLRenaud Gantois, Eric Jourdain, Gilles Dusserre. Recent patents on in-plane permeability measurement of LCM composite reinforcements. Recent Patents on Engineering, 3(2), p.109-116[HAL] / [BIB] / [DOI]
2009ACLGilles Dusserre, Gilles Dour, Gérard Bernhart. In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle. International Journal of Thermal Sciences, Elsevier, 48(2), p.428-439[HAL] / [BIB]
2005ACLGilles Dusserre, Fabrice Schmidt, Gilles Dour, Gérard Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process. Journal of Materials Processing Technology, Elsevier, 162(SI), p.484-491[HAL] / [BIB] / [DOI]
2005COMGilles Dusserre, Fabrice Schmidt, Gilles Dour, Gérard Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process. AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, 4 p., Gliwice-WIsla, PL[HAL] / [BIB]