Production scientifique :

33 contributions trouvées

Année	Type	Auteurs et titre du document	Liens
2020	ACL	Xavier Sourd, Redouane Zitoune, Akshay Hejjaji, Mehdi Salem, Laurent Crouzeix, D. Lamouche. Multi-scale analysis of the generated damage when machining pockets of 3D woven composite for repair applications using abrasive water jet process: Contamination analysis. Composites Part A: Applied Science and Manufacturing, Elsevier, 139, p.1-11/106118	[HAL] / [BIB] / [DOI]
2020	ACL	Amani Mahdi, Yosra Turki, Malek Habak, Mehdi Salem, Zoubeir Bouaziz. Experimental study of thrust force and surface quality when drilling hybrid stacks. International Journal of Advanced Manufacturing Technology, Springer Verlag, 107, p.3981–3994	[HAL] / [BIB] / [DOI]
2020	ACL	Cesar-Moises Sanchez-Camargo, Anis Hor, Mehdi Salem, Catherine Mabru. A robust method for mechanical characterization of heterogeneous materials by nanoindentation grid analysis. Materials and Design, Elsevier, 194, p.1-16/108908	[HAL] / [BIB] / [DOI]
2020	ACL	N. Nguyen-Dinh, Akshay Hejjaji, Redouane Zitoune, Christophe Bouvet, Mehdi Salem. New tool for reduction of harmful particulate dispersion and to improve machining quality when trimming carbon/epoxy composites. Composites Part A: Applied Science and Manufacturing, Elsevier, 131, p.105806	[HAL] / [BIB] / [DOI]
2020	ACL	Fatma Naiiri, Allègue Lamis, Mehdi Salem, Redouane Zitoune, Zidi Mondher. Performance of lightweight mortar reinforced with doum palm fiber. Journal of Composite Materials, SAGE Publications	[HAL] / [BIB] / [DOI]
2020	ACL	Xavier Sourd, Redouane Zitoune, Laurent Crouzeix, Mehdi Salem, M. Charlas. New model for the prediction of the machining depth during milling of 3D woven composite using abrasive waterjet process. Composite Structures, Elsevier, 234, p.1-12/111760	[HAL] / [BIB] / [DOI]
2020	ACL	Sonia Braiek, Ated Ben Khalifa, Redouane Zitoune, Mondher Zidi, Mehdi Salem. Fire behaviour of hybrid filament-wound single and adhesively bonded composites tubes under static pressure. Polymer Testing, Elsevier, 91, p.106815	[HAL] / [BIB] / [DOI]
2020	ACL	Mehdi Salem, Sabine Le Roux, Anis Hor, Gilles Dour. A new insight on the analysis of residual stresses related distortions in selective laser melting of Ti-6Al-4 V using the improved bridge curvature method. Additive Manufacturing, Elsevier, 36, p.1-16/101586	[HAL] / [BIB] / [DOI]
2019	COM	Damien Texier, Q Sirvin, Vincent Velay, Mehdi Salem, Daniel Monceau, Benoît Mazères, Eric Andrieu, Rémi Roumiguier, Benjamin B Dod. Oxygen/nitrogen-assisted degradation of the mechanical behavior of titanium alloys exposed at elevated temperature. Ti2019: The 14th world conference on titanium, 321(06004), 4 p., Nantes, FR	[HAL] / [BIB] / [DOI]
2019	ACL	Arturo Gomez Ortega, Luis Corona Galvan, Mehdi Salem, Kamel Moussaoui, Stéphane Segonds, Sébastien Rouquette, Frédéric Deschaux-Beaume. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process. Science and Technology of Welding and Joining, Maney Publishing, 24(6), p.538-547	[HAL] / [BIB] / [DOI]
2019	ACL	Gilles Dour, Mehdi Salem, Sabine Le Roux, Damien Texier, Farid Medjedoub, Pascal Lamesle, Farhad Rezai-Aria. AnT²COK, an analytical model for cyclic oxidation kinetics of hot-work tool steels in transient thermal cycling conditions. Corrosion Science, Elsevier, 147, p.169-181	[HAL] / [BIB] / [DOI]
2019	ACL	Mehdi Salem, Sabine Le Roux, Gilles Dour, Pascal Lamesle, Karim Choquet, Farhad Rezai-Aria. Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications. International Journal of Fatigue, Elsevier, 119, p.126-138	[HAL] / [BIB] / [DOI]
2019	ACL	Fatma Naiiri, Lamis Allègue, Mehdi Salem, Redouane Zitoune, Mondher Zidi. The effect of doum palm fibers on the mechanical and thermal properties of gypsum mortar. Journal of Composite Materials, SAGE Publications, 53(19), p.2641–2659	[HAL] / [BIB] / [DOI]
2018	ACL	Sabine Le Roux, Mehdi Salem, Anis Hor. Improvement of the bridge curvature method to assess residual stresses in selective laser melting. Additive Manufacturing, Elsevier, 22, p.320-329	[HAL] / [BIB] / [DOI]
2018	ACL	Jamel Saoudi, Redouane Zitoune, Suhasini Gururaja, Mehdi Salem, Salah Mezleni. Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray tomography analysis. Journal of Composite Materials, SAGE Publications, 52(10), p.1281-1294	[HAL] / [BIB] / [DOI]
2017	ACL	Aurélien Fabas, Aurélie Rouaix-Vande Put, Sébastien Doublet, Didier Domergue, Mehdi Salem, Daniel Monceau. Metal dusting corrosion of austenitic alloys at low and high pressure with the effects of Cr, Al, Nb and Cu. Corrosion Science, Elsevier, 123, p. 310-318	[HAL] / [BIB] / [DOI]
2016	ACL	Faisal Qayyum, Masood Shah, Osama Shakeel, Fariha Mukhtar, Mehdi Salem, Farhad Rezai-Aria. Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel. Engineering Failure Analysis, Elsevier, 62, p.242-263	[HAL] / [BIB] / [DOI]
2016	COM	G. Manar, Patrice Longère, E. Roux, Anis Hor, Mehdi Salem. Effect of strain rate on the behavior and failure of 2024 and 7075 aluminum alloys. DSTC 2016, 3rd International Conference on Defence and Security Technology, Kuala Lumpur (Malaysia), 15-17 August 2016, Kuala Lumpur, MY	[HAL] / [BIB]
2015	ACL	F. Szmytka, Mehdi Salem, Farhad Rezai-Aria, A. Oudin. Thermal fatigue analysis of automotive Diesel piston: Experimental procedure and numerical protocol. International Journal of Fatigue, Elsevier, 73, p.48-57	[HAL] / [BIB] / [DOI]
2015	COM	R. Julien, Vincent Velay, Vanessa Vidal, Mehdi Salem, Y. Dahan, R. Forestier, Farhad Rezai-Aria. Thermomechanical behaviour and microstructural evolution of high temperature forged Ti-6Al-4V during heat treatment quenching. 12th International Conference on the Mechanical Behavior of Materials, Karlsruhe - GERMANY, Karlsruhe, NL	[HAL] / [BIB]
2012	COM	Mehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Interaction between aluminizing, oxidation and thermal fatigue in aluminium die casting tool. TOOL 2012 - 9th International tooling conference, p.357-364, Leoben, AT	[HAL] / [BIB]
2011	B	Fabien Szmytka, Alexis Oudin, Farhad Rezai-Aria, Mehdi Salem. Piston's thermal fatigue testing device for thermal engine in motor vehicle, has optical pyrometer that measures maximum temperature in part of piston, and optical measurement unit that indicates structural damage of piston. Dispositif de test de fatigue thermique pour piston de moteur thermique et procédé de test associé. p.1-22, FR	[HAL] / [BIB]
2010	ACL	J.J. Jaeger, K Christopher Beard, Y. Chaimanee, Mehdi Salem, M. Benammi, H. Osama, P. Coster, A.A. Bilal, Ph. Duringer, Mathieu Schuster, X Valentin, B. Marandat, L. Marivaux, E. Metais, O Hammunda, M Brunet. Late middle Eocene epoch of Libya yields earliest known radiation of African antrhopoids.. Nature, Nature Publishing Group, 467	[HAL] / [BIB]
2009	PhD	Mehdi Salem. Étude de l'endommagement par fatigue thermique des moules de fonderie sous pression d'aluminium : effet de l'interaction avec l'aluminisation et l'oxydation. Study of thermal fatigue aluminium die-casting dies damage : effect of interaction with aluminizing and oxydation.	[HAL] / [BIB]
2009	COM	Mehdi Salem, Pascal Lamesle, Hicham Laribou, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and corrosion effects on non-isothermal fatigue of hot work tool steel X38CrMoV5 (AISI H11). 8ITC - 8th International Tooling Conference, 1, p.437-445, Aachen, DE	[HAL] / [BIB]
2009	COM	Mehdi Salem, Vincent Velay, Mohammed Cheikh, Gilles Dour, Pascal Lamesle, Farhad Rezai-Aria. Fatigue life modelling of hot forming tools. 8ITC - 8th International Tooling Conference, p.455-464, Aachen, DE	[HAL] / [BIB]
2008	COM	Pascal Lamesle, Mehdi Salem, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and corrosion effects on thermal fatigue behaviour of hot work tool steel X38CrMoV5 (AISI H11). HTCPM 2008 - 7th International Symposium on High Temperature Corrosion and Protection of Materials, 7 p., Les Embiez, FR	[HAL] / [BIB]
2008	COM	Pascal Lamesle, Mehdi Salem, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Oxidation and Corrosion Effects on Thermal Fatigue Behaviour of Hot Work Tool Steel X38CrMoV5 (AISI H11). 7th International symposium on high-temperature corrosion and protection of materials, 595-598, p.789 - 796, Les Embiez, FR	[HAL] / [BIB] / [DOI]
2008	ACL	Farid Medjedoub, Gilles Dour, Sabine Le Roux, Pascal Lamesle, Mehdi Salem, Patrick Hairy, Farhad Rezai-Aria. Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). International Journal of Microstructure and Materials Properties, Inderscience, 3(2/3), p.336-349	[HAL] / [BIB] / [DOI]
2007	COM	Mehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Environmental effects on thermal fatigue damage of a low-Si tempered martensitic hot work tool steel X38CrMoV5 (AISI H13). JP 2007 - 26èmes Journées de printemps, p.37-43, Paris, FR	[HAL] / [BIB]
2007	COM	Mehdi Salem, Pascal Lamesle, Gilles Dour, Sabine Le Roux, Farhad Rezai-Aria. Effet de l'environnement sur la fissuration par fatigue thermique d'aciers à outils pour travail à chaud X38CrMoV5 47HRC (AISI H11). MECAMAT 2007, 4 p., Aussois, FR	[HAL] / [BIB]
2007	ACL	Mehdi Salem, Pascal Lamesle, Hicham Laribou, Sabine Le Roux, Gilles Dour, Farhad Rezai-Aria. Effet de l'environnement sur l'endommagement par fatigue thermique des aciers à outils pour travail à chaud X38CrMoV5 (AISI H11). Bulletin du cercle d'études des métaux, Cercle d'études des métaux (Saint-Etienne), 17(18), 5 p.	[HAL] / [BIB]
2006	COM	Farid Medjedoub, Gilles Dour, Sabine Le Roux, Pascal Lamesle, Mehdi Salem, Farhad Rezai-Aria. Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). TOOL 06 - 7th International tooling conference, 2, p.461-469, Turin, IT	[HAL] / [BIB]