Stéphane Segonds

Maître de conférence (HDR) - Université Paul Sabatier (UPS)
Membre du groupe Modélisation des Systèmes et Microsystèmes Mécaniques (MS2M)
AR 2 019, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
 
    (recherche)
Activités de recherche :
Optimisation de process :
– Stratégies et trajectoires
                                  usinage,
                                  fabrication additive (Wire and Arc Additive Manufacturing),
                                  décollage avion.
– Topologie d’outils de coupe.
Analyse de sensibilité :
– Indice de sensibilité locaux, globaux
Propagation d’incertitude :
– propagation directe et inverse


Activités d'enseignement :

Fabrication (L3, M1, M2)

Automatique (L3, M1)

Conception, analyse de mécanisme (L3)

Fiabilité (L2)

 

 



Responsabilités collectives :

Responsable du master 2 Génie Mécanique en Aéronautique -parcours Production



Production scientifique :
37 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019ACLIman Alhossen, Fulbert Baudoin, Florian Bugarin, Stéphane Segonds, Gilbert Teyssedre. Use of Sobol indexes for efficient parameter estimation in a charge transport model. IEEE Transactions on Dielectrics and Electrical Insulation, Institute of Electrical and Electronics Engineers, 26(2), p.584-592[HAL] / [BIB] / [DOI]
2019ACLM. Azib, F. Baudoin, Nicolas Binaud, C. Villeneuve-Faure, G. Teyssèdre, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic interaction between the atomic force microscopy probe and a thin dielectric film with 3D-localized charge cloud. Journal of Applied Physics, American Institute of Physics, 125(4), p.045305[HAL] / [BIB]
2019ACLArturo Gomez Ortega, Luis Corona Galvan, Mehdi Salem, Kamel Moussaoui, Stéphane Segonds, Sébastien Rouquette, Frédéric Deschaux-Beaume. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process. Science and Technology of Welding and Joining, Maney Publishing, 24(6), p.538-547[HAL] / [BIB] / [DOI]
2018COMM. Azib, F. Baudoin, C. Villeneuve-Faure, G. Teyssèdre, Nicolas Binaud, Florian Bugarin, Stéphane Segonds. Numerical Simulations for Sensitivity Analysis of the Electrostatic Force Curve on Charge Localization in 3D. 2018 IEEE 2nd International Conference on Dielectrics (ICD), p.1-4, Budapest, FR[HAL] / [BIB]
2018ACLM Azib, Fulbert Baudoin, Nicolas Binaud, F Villeneuve-Faure, Florian Bugarin, Stéphane Segonds, G. Teyssedre. Numerical simulations for quantitative analysis of electrostatic interaction between atomic force microscopy probe and an embedded electrode within a thin dielectric: meshing optimization, sensitivity to potential distribution and impact of cantilever contribution. Journal of Physics D: Applied Physics, IOP Publishing, 51(16)[HAL] / [BIB] / [DOI]
2017ACLYang Xu, Yann Landon, Stéphane Segonds, Yicha Zhang. A decision support model in mass customization. Computers and Industrial Engineering, Elsevier, 114, p.11--21[HAL] / [BIB] / [DOI]
2017ACLI Alhossen, F Villeneuve-Faure, F. Baudoin, Florian Bugarin, Stéphane Segonds. Sensitivity analysis of the electrostatic force distance curve using Sobol’s method and design of experiments. Journal of Physics D: Applied Physics, IOP Publishing, 50(3)[HAL] / [BIB] / [DOI]
2017ACLStéphane Segonds, Philippe Seitier, Cyril Bordreuil, Florian Bugarin, Walter Rubio, Jean-Max Redonnet. An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter. Journal of Intelligent Manufacturing, Springer Verlag (Germany)[HAL] / [BIB] / [DOI]
2016ACLK. Moussaoui, Stéphane Segonds, Walter Rubio, Michel Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Materials Science and Engineering: A, 667, p.340--348[HAL] / [BIB]
2016COMV. Bonnot, Yann Landon, Stéphane Segonds. Tool/Material Interferences Sensibility to Process and Tool Parameters in Vibration- Assisted Drilling. International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing JCM, Catania, Italy, Catane, IT[HAL] / [BIB]
2016COMF. Baudoin, S. Le Roy, G. Teyssedre, Laurent Crouzeix, I. Alhossen, Florian Bugarin, Stéphane Segonds, Nicolas Binaud. Parameters sensitivity analysis in charge transport model using Sobol indexes for optimization purpose. IEEE International Conference on Dielectrics, Montpellier, FR[HAL] / [BIB]
2016ACLJean-Max Redonnet, Alejandro Gamboa Vázquez, Alberto Traslosheros Michel, Stéphane Segonds. Optimisation of free-form surface machining using parallel planes strategy and torus milling cutter. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 232(2), p.240-250[HAL] / [BIB] / [DOI]
2015ACLL. Jaeger, Stéphane Segonds, Christian Bes. Methodology Based on Multiagent for Solving Multidisciplinary Optimization Problem Under Uncertainty. Journal of Aerospace Information Systems, 12(2), p.290--298[HAL] / [BIB]
2015ACLS. Djebali, Stéphane Segonds, Jean-Max Redonnet, Walter Rubio. Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling. International Journal of Production Research, 53(17), p.5296--5309[HAL] / [BIB]
2015ACLSonia Djebali, Alexandre Perles, Sylvain Lemouzy, Stéphane Segonds, Walter Rubio, Jean-Max Redonnet. Milling plan optimization with an emergent problem solving approach. Computers and Industrial Engineering, Elsevier, 87, p.506--517[HAL] / [BIB]
2013ACLJean-Max Redonnet, Sonia Djebali, Stéphane Segonds, Johanna Senatore, Walter Rubio. Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter. Computer-Aided Design, Elsevier, 45(6), p.951-962[HAL] / [BIB] / [DOI]
2013COMLaure Jaeger, Tom Jorquera, Sylvain Lemouzy, Christian Gogu, Stéphane Segonds, Christian Bes. Uncertainty propagation in multi-agent systems for multidisciplinary optimization problems. 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO 10), pp. 1-10, Orlando, Florida, US[HAL] / [BIB]
2013ACLXavier Pessoles, Yann Landon, Stéphane Segonds, Walter Rubio. Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre. International Journal of Advanced Manufacturing Technology, Springer Verlag, 65(1-4), p.67-79[HAL] / [BIB] / [DOI]
2013ACLL. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Aircraft Multidisciplinary Design Optimization under both Model and Design Variables Uncertainty. Journal of Aircraft, 50(2), p.528--538[HAL] / [BIB] / [DOI]
2013COML. Cot, Christian Bes, Christian Gogu, Stéphane Segonds. Structural airframe maintenance strategy comparison: a new approach. 9th International Workshop on Structural Health Monitoring (IWSHM), Stanford, California (USA), 10-12th Sept., Stanford, California, US[HAL] / [BIB]
2013COMS. Djebali, Stéphane Segonds, Jean-Max Redonnet, Walter Rubio. Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling. World Congress on Engineering, London, GB[HAL] / [BIB]
2013COML. Jaeger, T. Jorquera, S. Lemouzy, Christian Gogu, Stéphane Segonds, Christian Bes. Uncertainty propagation in multi-agent system for multidisciplinary optimization problem. 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, Florida, USA, 19-24th May, Orlando, Florida, US[HAL] / [BIB]
2013ACLStéphane Segonds, Christian Bes, Frederic Monies, Jean-Max Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel. International Journal of Manufacturing Research, 8(3), p.277 -- 295[HAL] / [BIB] / [DOI]
2013ACLJohanna Senatore, Kamel Moussaoui, Stéphane Segonds, Frederic Monies, Walter Rubio. Analysis of drift in iso-scallop planning – Machining by regions. International Journal of Advanced Manufacturing Technology, 67, p.719--732[HAL] / [BIB] / [DOI]
2013ACLStéphane Segonds, J. Masounave, V. Songmene, Christian Bes. A simple analytical model for burr type prediction in drilling of ductile materials.. Journal of Materials Processing Technology, 213(6), p.971--977[HAL] / [BIB] / [DOI]
2012ACLGuillaume Cohen, Patrick Gilles, Stéphane Segonds, Michel Mousseigne, Pierre Lagarrigue. Thermal and mechanical modeling during dry turning operations. International Journal of Advanced Manufacturing Technology, Springer Verlag, 58(1-4), p.133-140[HAL] / [BIB] / [DOI]
2012ACLChristian Gogu, Youchun Qiu, Stéphane Segonds, Christian Bes. Optimization based algorithms for uncertainty propagation through functions with multidimensional output within evidence theory. Journal of Mechanical Design, American Society of Mechanical Engineers, 134(10), p. 914[HAL] / [BIB] / [DOI]
2012ASCLJohanna Senatore, Stéphane Segonds, Walter Rubio, G. Dessein. Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: application to milling by zones. CAD Computer Aided Design, 44(12), p.1151--1160[HAL] / [BIB] / [DOI]
2012ASCLXavier Pessoles, Jean-Max Redonnet, Stéphane Segonds, Michel Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths. Int J Adv Manuf Technol, 58(5-8), p.631--642[HAL] / [BIB] / [DOI]
2012COML. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Conception préliminaire avion avec prise en compte d’incertitudes de modèles et de paramètres. 13ème Colloque National AIP-Primeca, Mont Dore, 27-30 mars, Mont Dore, FR[HAL] / [BIB]
2011ACLPatrick Gilles, Johanna Senatore, Stéphane Segonds, Frederic Monies, Walter Rubio. Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC Machines. International Journal of Production Research, Taylor & Francis[HAL] / [BIB] / [DOI]
2011COMChristian Gogu, Youchun Qiu, Stéphane Segonds, Christian Bes. Belief and plausibility approximation methods for multidimensional functions. AIAA Non-Deterministic Approaches Conference, p. 2058, Denver, US[HAL] / [BIB]
2011COML. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Multidisciplinary optimization under uncertainty for preliminary aircraft sizing. SAE 2011 Aerotech Congress, Toulouse, 18-21st October, Toulouse, FR[HAL] / [BIB]
2011COML. Jaeger, Christian Gogu, Stéphane Segonds, Christian Bes. Optimisation multidisciplinaire sous incertitudes en conception préliminaire avion. 20ème Congrès Français de Mécanique, Besançon, 29 août - 2 sept., Besançon, FR[HAL] / [BIB]
2010ACLStéphane Segonds, Christian Gogu, Youchun Qiu, Christian Bes, A. Mauffrey. Design optimization under evidence based uncertainty with application to an engine connecting rod. International Journal of Design and Innovation Research, 5(3), p. 77-91[HAL] / [BIB]
2008ACLGuillaume Cohen, Stéphane Segonds, Michel Mousseigne, Pierre Lagarrigue. Tool flank wear influence on workpiece heating in dry machining. International Journal of Machining and Machinability of Materials, Inderscience, 4(4), p.406[HAL] / [BIB] / [DOI]
2007COMZuhaitz Areitio, Guillaume Cohen, Jean-Michel Baleynaud, Stéphane Segonds, Pierre Lagarrigue. Approach of the Prediction of the Thermal Field within an element during the machining operations. High Speed Machining, Sitxt International Conference. 21-22 March 2007, San Sebastián (Spain), San Sebastián, ES[HAL] / [BIB]