Bruno Castanié




Professeur à l'Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Membre du groupe Matériaux et Structures Composites (MSC)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse


☎ +33 (0) 5 61 17 11 72 (recherche)
☎ +33 (0) 5 61 55 97 39 (enseignement)

Activités de recherche

COMPORTEMENT DES STRUCTURES COMPOSITES :

  • Structures sandwichs : analyse non linéaire, impact, inserts.
  • Jonctions des structures stratifiées : Z-Pinning, Ruptures en offset, Pull-Through, Open hole, Bearing.
  • Structures raidies : décollement de raidisseur, calculs intensifs en postflambement.
  • Couplages amortissants dans les poutres composites.
  • Structures bois/composites

ESSAIS STRUCTURAUX SOUS SOLLICITATIONS COMPLEXES :

  • Coordinateur ANR VERTEX Acceptée en 2012. Début 01/01/2013.

USINAGE/FABRICATION

  • Analyse du lien paramètre de fabrication/tenue mécanique en LRI
  • Influence des défauts de surface sur la tenue mécanique des composites percés.

Thèses réalisées en collaboration avec Airbus, Airbus Group Innovation, Airbus Helicopter, DGA, Dassault Aviation.




Activités d'enseignement

Cours de Structures Composites 5A INSA, M2R, IPST CNAM, ISAE, Master Composite Albi

Cours D'éléments finis non linéaires et Abaqus



Responsabilités collectives

Responsable du M2 Recherche Génie Mécanique adossé à l'Institut Clément Ader, l'IMFT, le CEMES et le LGP Tarbes


Responsabilités administratives


Responsable du groupe Materiaux et Structures Composites de l'Institut Clément Ader


Autres

Membre des comités scientifiques de International Conférence on Composite Structures 16 et 17 et International Conférence on Sandwich Structures 10, ICLMSM

Membre Editorial Board COMPOSITE STRUCTURES


 


Production scientifique

103 contributions

Article de revue internationale avec comité de lecture

[ACL1]M. Fiorina, A. Seman, B. Castanié, K.M. Ali, C. Schwob and L. Mezeix. Spring-in prediction for carbon/epoxy aerospace composite structure . Composite Structures. 168, 739-745. 2017 [DOI]
[ACL2]L. Mezeix, S. Dols, C. Bouvet, B. Castanié, J.-P. Giavarini and N. Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures. Journal of Sandwich Structures and Materials. , . 2017 [DOI]
[ACL3]C. Sola, B. Castanié, L. Michel, F. Lachaud, A. Delabie and E. Mermoz . Bearing fatigue of composite laminates: damage monitoring and fatigue life prediction.. Composites Part B: Engineering. 110, 487-496. 2017
[ACL4]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Composite Structures. 148, 127-143. 2016 [DOI]
[ACL5]L. Bernard, G. Michon, R. El Fatmi and B. Castanié. Static and Dynamic Analysis of Bending-Torsion Coupling of CFRP Sandwich Beam. Composite Structures. 145(1)26-36. 2016 [DOI]
[ACL6]C. Sola, B. Castanié, L. Michel, F. Lachaud, A. Delabie and E. Mermoz. On the role of kinking in the bearing failure of composite laminates. Composite Structures. 141, 184-193. 2016 [DOI]
[ACL7]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates. Journal of Composite Materials. 49(10)1223-1240. 2015 [DOI]
[ACL8]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence of machining process and machining induced surface roughness on mechanical properties of continuous fiber composites. Experimental Mechanics. 55(3)519-528. 2015 [DOI]
[ACL9]L. Mezeix, A. Seman, N.M.N. Nasir, Y. Aminanda, A. Rivai, B. Castanié, P. Olivier and K.M. Ali. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures. 124, 196-205. 2015 [DOI]
[ACL10]A. Abbadi, L. Michel and B. Castanié. Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing. Advanced Composites Letters. 23(6)142-148. 2014
[ACL11]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures. 113, 369-381. 2014 [DOI]
[ACL12]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Study of the surface defects and dust generated during trimming of CFRP: influence of tool geometry, machining parameters and cutting speed range. Composites - Part A: Applied Science and Manufacturing. 66, 142-154. 2014 [DOI]
[ACL13]M. Haddad, R. Zitoune, H. Bougherara, F. Eyma and B. Castanié. Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior. Composites Part B: Engineering. Vol. 57, 136-143. 2014 [DOI]
[ACL14]L. Barrière, S. Marguet, B. Castanié, P. Cresta and J.-C. Passieux. An adaptive model reduction strategy for post-buckling analysis of stiffened structures. Thin-Walled Structures. 73, 81-93. 2013 [DOI] [HAL]
[ACL15]A. Njionhou, F. Berthet and B. Castanié. Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven. International Journal of Advanced Manufacturing Technology. 65(9-12)1289-1302. 2013 [DOI]
[ACL16]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Machinability and surface quality during high speed trimming of multi directional CFRP. International Journal of Machining and Machinability of Materials. 13(2/3)289-310. 2013 [DOI]
[ACL17]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. Applied Composite Materials. 19(6)885-899. 2012 [DOI]
[ACL18]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures. 94(10)3082–3091. 2012 [DOI]
[ACL19]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Application of high-performance computing to a bolt static tensile test. International Journal on Interactive Design and Manufacturing. 6, 1-9. 2012 [DOI]
[ACL20]M. Haddad, R. Zitoune, F. Eyma, B. Castanié and H. Bougherara. Surface quality and dust analysis in high speed trimming of CFRP . Applied Mechanics and Materials. 13(2/3)57-62. 2012 [DOI]
[ACL21]J. Toral, B. Castanié, J.-J. Barrau and N. Swiergel. Multi-level analysis of low-cost Z-pinned composite joints; Part 2: Joint behaviour. Composites - Part A: Applied Science and Manufacturing. 42(12)2082-2092. 2011
[ACL22]J. Toral, B. Castanié, J.-J. Barrau and N. Swiergel. Multi-level analysis of low-cost Z-pinned composite joints Part 1: Single Z-pin behaviour. Composites - Part A: Applied Science and Manufacturing. 42(12)2070-2081. 2011
[ACL23]B. Castanié, S. Crézé, L. Risse, J.J. Barrau and F. Lachaud. Experimental analysis of failures in filled hole compression tests of carbon/epoxy laminate. Composite Structures. 92(5)1192-99. 2010 [DOI]
[ACL24]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding Part 2 : Element and panel level. Composite Structures. 90(10)392–403. 2009 [DOI]
[ACL25]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding Part 1 : Non-specific specimen level. Composite Structures. 90(10)381–391. 2009 [DOI]
[ACL26]C. Bouvet, B. Castanié, M. Bizeul and J.-J. Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements. International Journal of Solids and Structures. 46(14-15)2809-2821. 2009 [DOI]
[ACL27]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Experimental and numerical study of compression after impact of sandwich structures with metallic skins. Composites Science and Technology. 69(1)50-59. 2009 [DOI]
[ACL28]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Nonlinear Finite Element analysis of inserts in sandwich structures. Composites Part B: Engineering. 39, 1077–1092. 2008
[ACL29]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core crush criteria to determine the strength of sandwich composite structures subjected to compression after impact.. Composite Structures. 86, 243–250. 2008
[ACL30]B. Castanié, C. Bouvet, Y. Aminanda, J.-J. Barrau and P. Thevenet. Modelling of low energy/low velocity impact on nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering. 35, 620-634. 2008 [OATAO]
[ACL31]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. An experimental and numerical study on omega stringer debonding. Composite Structures. 86, 233-242. 2008
[ACL32]J.-J. Barrau, S. Creze and B. Castanié. Buckling and post-buckling of beams with flat webs. Thin-Walled Structures. 43(6)877-1002. 2005
[ACL33]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Experimental and numerical analysis of inserts in sandwich structures. Applied Composite Materials. 12(3-4)177-191. 2005
[ACL34]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Experimental analysis and modeling of the crushing of honeycomb cores. Applied Composite Materials. 12(3-4)213-217. 2005
[ACL35]B. Castanié, J.-J. Barrau, J.-P. Jaouen and S. Rivallant. Combined shear/compression structural testing of asymmetric sandwich structures. Experimental Mechanics. 44(5)461-472. 2004
[ACL36]B. Castanié, J.-J. Barrau and J.-P. Jaouen. Theoretical and experimental analysis of asymmetric sandwich structures. Composite Structures. 55(3)295-306. 2002
[ACL37]J.-F. Ferrero, J.-J. Barrau, J.-M. Segura, B. Castanié and M. Sudre. Analytical theory for an approach calculation of non-balanced composite box beams. Thin-Walled Structures. 39(8)709-729. 2001 [DOI]
[ACL38]J.-F. Ferrero, J.-J. Barrau, J.-M. Segura, B. Castanié and M. Sudre. Torsion of thin-walled composite beams with midplane symetry. Composite Structures. 54(1)111-120. 2001

Article de revue avec comité de lecture non répertorié

[ACLN1]R. Piquet, F. Lachaud, S. Catche and B. Castanié. Tolérance aux dommages de perçages dans les assemblages boulonnés composites. Revue des Composites et des Materiaux Avances. 24(4)481-493. 2014
[ACLN2]R. Zitoune, N. Cadorin, B. Castanié and M. Sève. Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage. Revue des Composites et des Materiaux Avances. 23(3)387-404. 2013
[ACLN3]A. Njionhou, F. Berthet and B. Castanié. Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication. Matériaux et Techniques. 98(2)151-163. 2010 [DOI]
[ACLN4]B. Castanié, J.-J. Barrau, J.-F. Ferrero and J.-P. Jaouen. Analyse non linéaire et structurale des poutres sandwichs dissymétriques. Revue des Composites et des Materiaux Avances. 10(2). 2000

Communication invitée dans un congrès national ou international

[INV1]B. Castanié. Recent advances on aeronautique structures. International Conference on Mechanical, Automotive and Aerospace Engineering 2011,ICMAAE '11, Kuala-Lumpur, May 17-19, 2011. Invited plenary lecture 2011

Communication avec actes dans un congrès international ou national

[ACT1]J. Serra, J.E. Pierré, J.N. Périé, J.C. Passieux, C. Bouvet and B. Castanié. Modélisation d’essais structuraux sur plaques entaillées. Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-9 2017
[ACT2]J. Serra, J.E. Pierré, J.-N. Périé, J.-C. Passieux, C. Bouvet and B. Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-7 2017
[ACT3]B. Castanié. Safety failure envelops to validate composite structure . Proceedings of Proceedings of ICCS19 19th International Conference on Composite Structures 2016
[ACT4]J.D.D. Rodriguez Ramirez, B. Castanié, C. Bouvet, M. Deloubes and G. J.-P.. Enhanced nonlinear insert model. Proceedings of ICCS19 19th International Conference on Composite Structures 2016
[ACT5]B. Castanié. COMPOSITE STRUCTURES IN AERONAUTICS: PAST, PRESENT AND FUTURE. Proceedings of The 5th Burapha University International Conference 2016, July 28-29, Pattaya, Thailand, 2016
[ACT6]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Proceedings of 17th European Conference on Composite Materials, Munich (ECCM 2016) 2016
[ACT7]J.P. Susainathan, F. Eyma, E. De Luycker, A. Cantarel and B. Castanié. Experimental investigation on impact behaviour of wood-based sandwich structures. Proceedings of Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016) 2016
[ACT8]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT9]L. Bernard, B. Castanié and G. Michon. Dynamic bending-twisting coupling of an horizontally graded CFRP sandwich beam. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT10]J.P. Susainathan, F. Eyma, E. De Luycker, A. Cantarel and B. Castanié. IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT11]V. Achard, C. Bouvet and B. Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. Proceedings of 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015 2015
[ACT12]L. Bernard, G. Michon, B. Castanié, R. El Fatmi, V. Negre and D. Reveillon. Analyse Dynamique et Statique du Couplage Flexion-Torsion d’une Poutre Sandwich. Proceedings of JNC 19, Journées Nationales sur les Composites, Lyon, France 2015
[ACT13]B. Castanié, J.D.D. Rodriguez Ramirez, C. Bouvet and J.-P. Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives. . Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen 2015
[ACT14]C. Sola, L. Michel, F. Lachaud, B. Castanié, A. Delabie and E. Mermoz . Comportement en matage de stratifiés quasi-isotropes à renforts tissés ou quasi-UD.. Proceedings of JNC 19, Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet2013 2015 2015
[ACT15]B. Castanié, A. Daidié, C. Bouvet, V. Achard and L. Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France 2015
[ACT16]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Discrete Ply Modelling analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT17]V. Achard, C. Bouvet and B. Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT18]C. Sola, L. Michel, F. Lachaud, B. Castanié, A. Delabie and E. Mermoz . BEARING RESPONSE OF CFRPs : COMPARATIVE STUDY OF WOVEN AND UD FABRIC QUASI ISOTROPIC LAMINATES UNDER STATIC AND FATIGUE LOAD. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT19]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Digital Image Correlation and Thermography analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT20]B. Castanié. THE VERTEX PROJECT: COMPLEX LOADING ANALYSIS AND VALIDATION OF COMPOSITE STRUCTURES. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT21]L. Bernard, G. Michon, B. Castanié, V. Negre and D. Reveillon. Static and Dynamic Analysis of Bending-Torsion Coupling of a CFRP Sandwich Beam. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT22]Y. Aminanda, K. Mansur Ali, M. Nasir, M. Nazreen, A. Rivai, B. Castanié and P. Olivier. Spring-back Prediction of CRFP Composite Laminate Ribs . Proceedings of Conference on Advances in Composite Materials and Structures, Istanbul, April 2015 2015
[ACT23]M. Ramanakoto, F. Eyma, T. Ramanantoandro, P. Gallien and B. Castanié. Wood surfaces characteristics for an acceptable bonding strength. Proceedings of 22th International Wood Machining Seminar 2015
[ACT24]S. Adam, L. Mezeix, A. Rivai, Y. Aminanda, P. Olivier, B. Castanié and K. Ali Mansour. Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process. Proceedings of Computational and experimental methods for composite materials and structures, Harbin (China), September 2014 2014
[ACT25]L. Mezeix, M.N. Nasir, L. Aminanda, A. Rivai, B. Castanié, P. Olivier and K. Ali Mansour. Spring-back prediction through numerical simulation for composite manufacturing using autoclave process. Proceedings of Computational and experimental methods for composite materials and structures, Harbin (China), September 2014 2014
[ACT26]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. Proceedings of International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy) 2014
[ACT27]L. Bernard, D. Cornette, V. Nègre, B. Kerdreux, B. Castanié and G. Michon. Couplage Aéroélastique Flexion-Torsion de Pale d’Hélicoptère. Proceedings of ViSHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr) 2014
[ACT28]M. Haddad, R. Zitoune, H. Bougherara, F. Eyma and B. Castanié. Influence of trimming process on the surface quality and on the mechanical behavior of CFRP structures.. Proceedings of 19th International Conference on Composite Materials. 2013
[ACT29]B. Castanié, S. Crézé, J.-J. Barrau and L. Risse. Offset Failure in Filled Hole Compression Tests. Proceedings of 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2. 2013
[ACT30]N. Cadorin, R. Zitoune, F. Collombet, B. Castanié and M. Seve. Influence of cutting parameters and wear in drilling of 3D wowen carbon/epoxy composite. Proceedings of 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2 2013
[ACT31]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence du procédé d'usinage sur l'usinabilité et le comportement mécanique de pièces composites. Proceedings of JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013 2013
[ACT32]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Impact et tenue résiduelle des inserts de structures sandwichs. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT33]L. Barrière, S. Marguet, J.-C. Passieux, B. Castanié and P. Cresta. Modeling strategies for postbuckilig of large stiffened structures. Proceedings of ICCS 16, Intenational Conference on Composite Structure, June 17-20 (Porto, Portugal) 2013
[ACT34]F. Berthet, A. Njionhou and B. Castanié. Influence géométrique de la présence de fils de couture sur la perméabilité d'un stratifié. Proceedings of JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013 2013
[ACT35]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Experimental analysis of impact and pull-through after impact in insert in sandwich structures. Proceedings of 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013 2013
[ACT36]N. Cadorin, R. Zitoune, B. Castanié, F. Collombet and M. Seve. Etude expérimentale de l'influence des paramètres de coupe et de l'usure de l'outil sur la qualité de percage d'un composite tissé 3D.. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT37]L. Barrière, S. Marguet, P. Cresta, B. Castanié and J.-C. Passieux. Décomposition de domaine et réduction de modèle: stratégie de résolution pour le post-flambement local des structures raidies. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT38]B. Castanié, Y. Aminanda and C. Schwob. Modelling Of Impact On Sandwich Structure For Fast Maintenance Loops. Proceedings of ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012. 2012
[ACT39]L. Barrière, S. Marguet, B. Castanié and P. Cresta. A Computational Strategy For Post-buckling Analysis Of Large Stiffened Structures. Proceedings of ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012 2012
[ACT40]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Effect of Machining Parameters on high speed trimming of CFRP. Proceedings of 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT41]B. Castanié and J.-F. Ferrero. Nonlinear Response of Symmetric Sandwich structures Subjected to in-plane loads. Proceedings of ICSS 10, 10th International Conference On Sandwich Structures. Nantes, France, 27-29 August 2012 2012
[ACT42]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Relation between surface roughness indicators and static strengh of drilled laminates. Proceedings of 15th International Conference on Composite Structures, ICCS 16, Porto, June 28-30 2011
[ACT43]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates. Proceedings of ICCS16, Porto (Portugal), 28-30 juin 2011
[ACT44]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus. Proceedings of JNC17-17émes journées nationales des composites 2011 [HAL]
[ACT45]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Explicit simulation and high-performance computing, application to a bolt tensile test. Proceedings of IDMME-Virtual Concept 2010, Bordeaux, France 2010
[ACT46]A. Abbadi, L. Michel and B. Castanié. Experimental Analysis of Composite Structures Debonding under Cyclic Loading. Proceedings of ICCE-18 Anchorage, Alaska,USA, July 4-10, 2010 2010
[ACT47]A. Njionhou, F. Berthet and B. Castanié. Relationships between process parameters and mechanical properties of laminated plates made by L.R.I.. Proceedings of FPCM 10 - 10th International conference on Flow Processes in Composite Materials p.9p 2010
[ACT48]L. Mézeix, D. Poquillon, C. Bouvet and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibres As Core Material: Processing And Mechanical Properties. Proceedings of Icss 9, Pasadena, California, June 14-16 2010
[ACT49]A. Njionhou, F. Berthet and B. Castanié. Parameters affecting mechanical properties of composite manufactured by liquid resin infusion (LRI) en fonction des paramètres de fabrication. Proceedings of ICCM 17 - 17th International Conference on Composite Materials 2009
[ACT50]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. experimental analysis of pull-out strength of z-pins and screws in carbon-epoxy laminate. Proceedings of 15th International Conference on Composite Structures, ICCS 15, Porto, June 15-17, 2009. 2009
[ACT51]L. Mézeix, C. Bouvet, D. Poquillon and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibers As Core Material : Processing And Mechanical Properties. Proceedings of Icss8, Porto (portugal), 6-8 Mai 2008
[ACT52]C. Bouvet, B. Castanié and J.-J. Barrau. Modelling Of Impact Damage In Laminated Composites. Proceedings of Eccm13, Stockholm (suède), 2-5 Juin 2008
[ACT53]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core Crush Criteria To Determine The Strength Of Sandwich Composite Structures Subjected To Compression After Impact. Proceedings of Iccs-14, Melbourne (australia), 19-21 Novembre 2007

Communication sans actes dans un congrès international ou national

[COM1]C. Bouvet, S. Rivallant, J.-J. Barrau, N. Hongkarnjanakul, B. Castanié, H. Abdulhamid, T. Lisle, E. Abi Abdallah, B. Ostre and S. Petit. Discrete ply modelling of impact and compression after impact on composite laminates. Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July 2014

Communication par poster dans un congrès international ou national

[AFF1]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge . Journées Nationales sur les Composites 2015
[AFF2]L. Barrière, J.-C. Passieux, S. Marguet, B. Castanié and P. Cresta. Adaptive Model Reduction for Local Post-Buckling Analysis. 2nd International Workshop on Reduced Basis, POD and PGD model (Blois, Fr) 2013

Chapitre d'ouvrage scientifique

[OSC1]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence of Tool Geometry and Machining Parameters on the Surface Quality and the Effect of Surface Quality on Compressive Strength of Carbon Fibre Reinforced Plastic . In book Materials Science Forum - Vol 763, p.107-125. Ed. Trans Tech Publications, Switzerland. 2013 ISBN:doi:10.4028/www.scientific.net/MSF.763.107
[OSC2]B. Castanié, Y. Aminanda, J.-J. Barrau and P. Thevenet. 10. Discrete modelling of the crushing of Nomex honeycomb core and application to impact and post impact behavior of sandwich structures. In book Recent avances on dynamic failure of composite and sandwich structures, p.. Ed. . 2012

Ouvrage de vulgarisation (ou chapitre)

[OV1]B. Castanié, C. Bouvet and D. Guedra-degeorges. Structures en Matériaux Composites Stratifiés. Ed. Techniques de l'Ingénieur 2013

Direction d'ouvrage collectif

[DO1]S. Abrate, B. Castanié and Y. Rajapakse. Recent advances in dynamic failure of composite and sandwich structures. , Ed. Springer. 2012 ISBN:978-94-007-5328-0



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80