Christophe Bouvet




Professeur à l'Institut Supérieur de l'Aéronautique et de l'espace (ISAE-SUPAERO)
Membre du groupe Matériaux et Structures Composites (MSC)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse


☎ +33 (0) 5 61 33 89 68

Activités de recherche

Mes activités de recherche concernent l'étude de l'endommagement des structures composites.
Mon axe principal traite des sollicitations d'impact basse et moyenne vitesse, du point de vue expérimental et numérique.
Mon second axe de recherche concerne l'endommagement des tissus composites sous sollicitations planes et en particulier de la propagation de coupure, du point de vue expérimental et numérique.

Activités d'enseignement

Mes activités d'enseignement se déroulent au sein de la formation supaéro de l'ISAE. J'y enseigne la mécanique des structures, la mécanique des milieux continus et en particulier les structures composites.

Responsabilités collectives

Je suis actuellement responsable de la 2ème année du cursus supaéro.

Production scientifique

127 contributions

Article de revue internationale avec comité de lecture

[ACL1]J. Serra, J.-E. Pierré, J.-C. Passieux, J.-N. Périé, C. Bouvet and B. Castanié. Validation and Modeling of Aeronautical Composite Structures Subjected to Combined Loadings: the VERTEX Project. Part 1: Experimental Setup, FE-DIC Instrumentation and Procedures. Composite Structures. , in press. 2017 [DOI]
[ACL2]T. Lisle, M.-L. Pastor, C. Bouvet and P. Marguerès. Damage of woven composite under translaminar cracking tests using infrared thermography. Composite Structures. 161, 275–286. 2017 [DOI]
[ACL3]L. Mezeix, S. Dols, C. Bouvet, B. Castanié, J.-P. Giavarini and N. Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures. Journal of Sandwich Structures and Materials. , . 2017 [DOI]
[ACL4]N. Dubary, G. Taconet, C. Bouvet and B. Vieille. Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications. Composite Structures. , . 2017 [DOI]
[ACL5]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Composite Structures. 148, 127-143. 2016 [DOI]
[ACL6]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissière and C. Minot. Experimental study of compression after impact of asymmetrically tapered composite laminate. Composite Structures. 149, 292-203. 2016 [DOI]
[ACL7]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Experimental analysis of CFRP laminates subjected to compression after edge impact. Composite Structures. 126, 314-326. 2016
[ACL8]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissière and C. Minot. Numerical simulation of impact and compression after impact of asymmetrically tapered laminated CFRP. International Journal of Impact Engineering. 95, 154-164. 2016
[ACL9]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Finite Element analysis of CFRP laminates subjected to compression after edge impact. Composite Structures. , . 2016 [DOI]
[ACL10]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Edge impact modeling on stiffened composite structures. Composite Structures. 126, 314-326. 2015
[ACL11]T. Lisle, C. Bouvet, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography. Composites Science and Technology. 112, 22-33. 2015 [DOI]
[ACL12]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP. Composites - Part A: Applied Science and Manufacturing. 68, 110-120. 2015 [DOI]
[ACL13]L. Mezeix, D. Poquillon and C. Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part I: Experimental Investigation. Applied Composite Materials. , . 2015 [DOI]
[ACL14]B. Ostré, C. Bouvet, F. Lachaud, C. Minot and J. Aboissière. Edge impact damage scenario on stiffened composite structure. Journal of Composite Materials. 49(13)1599-1612. 2015
[ACL15]T. Lisle, C. Bouvet, M.-L. Pastor, T. Rouault and P. Marguerès. Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts. Journal of Materials Science. 50(18)6154-6170. 2015 [DOI]
[ACL16]L. Mezeix, D. Poquillon and C. Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part II: Analytical Model. Applied Composite Materials. , . 2015 [DOI]
[ACL17]H.A. Israr, N. Hongkarnjanakul, S. Rivallant and C. Bouvet. Post-impact investigation of CFRP laminated plate. Jurnal Teknologi (Sciences and Engineering). 71(2)71-78. 2014 [DOI]
[ACL18]N. Hongkarnjanakul, S. Rivallant, C. Bouvet and A. Miranda. Permanent indentation characterization for low-velocity impact modelling using three-point bending test. Journal of Composite Materials. 48, 2441-2454. 2014 [DOI]
[ACL19]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures. 113, 369-381. 2014 [DOI]
[ACL20]H.A. Israr Ahmad, S. Rivallant, C. Bouvet and J.-J. Barrau. Finite Element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept. Composites - Part A: Applied Science and Manufacturing. 62, 16-25. 2014 [DOI]
[ACL21]S. Rivallant, C. Bouvet, E. Abi Abdallah, B. Broll and J.-J. Barrau. Experimental analysis of CFRP laminates subjected to Compression After Impact: the role of impact-induced cracks in failure. Composite Structures. 111, 147-157. 2014 [DOI]
[ACL22]B. Vieille, V. Casado and C. Bouvet. Influence of matrix toughness and ductility on the compression after impact behavior of woven-ply thermoplastic and thermosetting composites: a comparative study. Composite Structures. 110, 207-218. 2014 [DOI]
[ACL23]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure. Composite Structures. 106, 549-559. 2013 [DOI]
[ACL24]S. Rivallant, C. Bouvet and N. Hongkarnjanakul. Failure analysis of CFRP laminates subjected to Compression After Impact: FE simulation using discrete interface elements. Composites - Part A: Applied Science and Manufacturing. 55, 83-93. 2013 [DOI]
[ACL25]A. Kolopp, S. Rivallant and C. Bouvet. Experimental Study of Sandwich Structures as Armour against Medium-Velocity Impacts. International Journal of Impact Engineering. 61, 24-35. 2013 [DOI]
[ACL26]A. Kolopp, R. Alvarado, S. Rivallant and C. Bouvet. Modeling impact on aluminium sandwich including velocity effects in honeycomb core. Journal of Sandwich Structures and Materials. 15, 733-757. 2013 [DOI]
[ACL27]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and P. Prieto Corral. Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography. Composites - Part A: Applied Science and Manufacturing. 53, 75-87. 2013 [DOI]
[ACL28]B. Hachemane, R. Zitoune, B. Bezzazi and C. Bouvet. Sandwich composites impact and indentation behaviour study. Composites Part B: Engineering. 51, 1-10. 2013
[ACL29]H. Abdulhamid, A. Kolopp, C. Bouvet and S. Rivallant. Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact. International Journal of Impact Engineering. 51, 1-12. 2013 [DOI]
[ACL30]B. Vieille, V.M. Casado and C. Bouvet. About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: a comparative study. Composite Structures. 101, 9-21. 2013 [DOI]
[ACL31]T. Rouault, C. Bouvet, V. Nègre and P. Rauch. Reversible rail shear apparatus applied to the study of woven laminate shear behavior. Experimental Mechanics. , . 2013 [DOI]
[ACL32]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. Applied Composite Materials. 19(6)885-899. 2012 [DOI]
[ACL33]C. Bouvet, S. Rivallant and J.-J. Barrau. Low velocity impact modeling in composite laminates capturing permanent indentation. Composites Science and Technology. 72(16)1977-1988. 2012 [DOI]
[ACL34]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures. 94(10)3082–3091. 2012 [DOI]
[ACL35]P. Rahmé, C. Bouvet, S. Rivallant, V. Fascio and G. Valembois. Experimental investigation of impact on composite laminates with protective layers. Composites Science and Technology. 72(2)182-189. 2012 [DOI] [OATAO]
[ACL36]A. Shahdin, J. Morlier, L. Mezeix, C. Bouvet and Y. Gourinat. Evaluation of the impact resistance of various composite sandwich beams by vibration tests. Shock and Vibration. 18(6)789-805. 2011 [DOI] [OATAO]
[ACL37]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading, Part II: Modelling. Composites Science and Technology. 71(3)297-305. 2011 [DOI]
[ACL38]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: Experimental. Composites Science and Technology. 71(3)289-296. 2011 [DOI]
[ACL39]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of a new sandwich structure with carbon fiber network core. Journal of Sandwich Structures and Materials. 12(5)569-589. 2010 [DOI] [OATAO]
[ACL40]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. International Journal of Fatigue. 32(1)60-65. 2010 [DOI]
[ACL41]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Monitoring the Effects of Impact Damages on Modal Parameters in Carbon Fiber Entangled Sandwich Beams. Engineering Structures. 31(12)2833-2841. 2009 [DOI] [OATAO]
[ACL42]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of glass fiber entangled sandwich beams : a comparison with honeycomb and foam sandwich beams. Composite Structures. 90(4)404-412. 2009 [DOI] [OATAO]
[ACL43]E. Abi Abdallah, C. Bouvet, S. Rivallant and J.-J. Barrau. Experimental analysis of damage creation and permanent indentation on highly oriented plates. Composites Science and Technology. 6(7-8)1238-1245. 2009 [DOI] [OATAO]
[ACL44]C. Bouvet, B. Castanié, M. Bizeul and J.-J. Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements. International Journal of Solids and Structures. 46(14-15)2809-2821. 2009 [DOI]
[ACL45]L. Mézeix, C. Bouvet, J. Huez and D. Poquillon. Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression. Journal of Materials Science. 44(14)3652-3661. 2009 [DOI]
[ACL46]B. Castanié, C. Bouvet, Y. Aminanda, J.-J. Barrau and P. Thevenet. Modelling of low energy/low velocity impact on nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering. 35, 620-634. 2008 [OATAO]
[ACL47]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core crush criteria to determine the strength of sandwich composite structures subjected to compression after impact.. Composite Structures. 86, 243–250. 2008
[ACL48]S. Petit, C. Bouvet, A. Bergerot and J.-J. Barrau. Impact And Compression After Impact Experimental Study Of A Composite Laminate With A Cork Thermal Shield. Composites Science and Technology. 67, 3286-3299. 2007 [DOI]
[ACL49]C. Lexcellent, L. Boubakar, C. Bouvet and S. Calloch. About Modelling The Shape Memory Alloy Behaviour Based On The Phase Transformation Surface Identification Under Proportional Loading And Anisothermal Conditions. International Journal of Solids and Structures. 43(3-4)613-626. 2006
[ACL50]C. Bouvet, S. Calloch and C. Lexcellent. A Phenomenological Model For Pseudoelasticity Of Shape Memory Alloys Under Multiaxial Proportional And Nonproportional Loadings. European Journal of Mechanics, A/Solids. 23(1)37-61. 2004
[ACL51]C. Bouvet, S. Calloch and C. Lexcellent. Mechanical Behavior Of A Cu-al-be Shape Memory Alloy Under Multiaxial Proportional And Nonproportional Loadings. Journal of Engineering Materials and Technology, Transactions of the ASME. 124(1)112-124. 2002
[ACL52]C. Lexcellent, A. Vivet, C. Bouvet, S. Calloch and P. Blanc. Experimental And Numerical Determinations Of The Initial Surface Of Phase Transformation Under Biaxial Loading In Some Polycrystalline Shape Memory Alloys. Journal of the Mechanics and Physics of Solids. 50(12)2717-2735. 2002
[ACL53]J. Rejzner, C. Bouvet, S. Calloch, P. Robinet and C. Lexcellent. Some Tools For Using Shape Memory Elements As Actuators : Modeling Of Proportional Loading, Bending Beams, A Smart Hinge Beam. Materials Engineering. 11(1)7-22. 2000

Communication invitée dans un congrès national ou international

[INV1]C. Bouvet. Dommage d’impact sur stratifié composite. JNC 17, Poitiers (France), 15-17 juin Invited lecture 2011
[INV2]C. Bouvet, S. Rivallant and J.-J. Barrau. Endommagement de stratifiés composites sous impact basse vitesse et indentation permanente. Mecamat, Aussois (France), 24-28 janvier Invited lecture 2011

Communication avec actes dans un congrès international ou national

[ACT1]J.D.D. Rodriguez Ramirez, C. Bouvet and B. Castanié. Shear testing of honeycomb cores for inserts. Proceedings of International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017 2017
[ACT2]J. Serra, J.-E. Piérré, J.-C. Passieux, J.-N. Périé, C. Bouvet, B. Castanié and C. Petiot. The VERTEX program: complex loading and validation of aeronautic composite structures. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017 2017
[ACT3]J. Serra, C. Bouvet, B. Castanié and C. Petiot. DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017 2017
[ACT4]J. Serra, J.E. Pierré, J.N. Périé, J.C. Passieux, C. Bouvet and B. Castanié. Modélisation d’essais structuraux sur plaques entaillées. Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-9 2017
[ACT5]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Etude expérimentale et numérique de la propagation de coupure dans des stratifiés composites soumis à de la traction simple. Proceedings of CSMA 2017, 13ème Colloque National en Calcul des Structures 15-19 mai 2017, Presqu’île de Giens (Var) 2017
[ACT6]J. Serra, J.E. Pierré, J.-N. Périé, J.-C. Passieux, C. Bouvet and B. Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-7 2017
[ACT7]J.D.D. Rodriguez Ramirez, B. Castanié, C. Bouvet, M. Deloubes and G. J.-P.. Enhanced nonlinear insert model. Proceedings of ICCS19 19th International Conference on Composite Structures 2016
[ACT8]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Proceedings of 17th European Conference on Composite Materials, Munich (ECCM 2016) 2016
[ACT9]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT10]V. Achard, C. Bouvet and B. Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. Proceedings of 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015 2015
[ACT11]B. Castanié, J.D.D. Rodriguez Ramirez, C. Bouvet and J.-P. Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives. . Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen 2015
[ACT12]B. Castanié, A. Daidié, C. Bouvet, V. Achard and L. Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France 2015
[ACT13]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Discrete Ply Modelling analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT14]C. Bouvet, T. Lisle, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Mesure de la ténacité de la rupture de fibres en compression par thermographie infrarouge. Proceedings of JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet 2015
[ACT15]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Digital Image Correlation and Thermography analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT16]S. Rivallant, J. Brassard, H. Abdulhamid and C. Bouvet. Etude expérimentale de l’impact basse vitesse et basse énergie sur plaques composites précontraintes. Proceedings of JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet 2015
[ACT17]V. Achard, C. Bouvet and B. Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT18]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. Proceedings of International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy) 2014
[ACT19]T. Lisle, C. Bouvet, M.-L. Pastor and P. Marguerès. An experimental study of damage evolution in 2D thin woven composite under quasi-static loading using infrared thermography. Proceedings of ECCM16 2014
[ACT20]N. Hongkarnjanakul, S. Rivallant and C. Bouvet. Modelling permanent indentation in composite subjected to impact : identification through a specific three-point bending test. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT21]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. INVESTIGATION OF IMPACT DAMAGE OF TAPERED COMPOSITE LAMINATES. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT22]T. Lisle, N. Hongkarnjanakul, C. Bouvet, M.-L. Pastor, P. Marguerès and S. Rivallant. Measure of fracture toughness in composite structures using Infrared Thermography. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT23]C. Bouvet, N. Hongkarnjanakul and S. Rivallant. Simulation d´endommagement d´impact sur stratifié composite : Effet du drapage et de la rupture de fibres en compression. Proceedings of CFM 2013 – 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 Août 2013
[ACT24]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Impact et tenue résiduelle des inserts de structures sandwichs. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT25]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. Caractérisation d’un modèle d’indentation permanente pour impact basse vitesse à l’aide d’un essai de flexion 3 points. Proceedings of JNC 18 - 18èmes Journées Nationales sur les Composites, Nantes, France, 12-14 Juin 2013
[ACT26]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Experimental analysis of impact and pull-through after impact in insert in sandwich structures. Proceedings of 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013 2013
[ACT27]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Étude expérimentale de l’endommagement d’un composite tissé mince sous traction quasi-statique via thermographie infrarouge. Proceedings of JNC 18 2013
[ACT28]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. Etude expérimentale de l’endommagement à l’impact de plaques composites avec reprise de plis à pente asymétrique. Proceedings of Journées Nationales des Composites, JNC18, Nantes 2013
[ACT29]A. Kolopp, C. Bouvet and S. Rivallant. Experimental study on sandwich structures subjected to medium velocity impacts for aircraft armour applications. Proceedings of ICSS 10 - 10th International Conference on Sandwich Structures, Nantes, France, August 27-29 2012
[ACT30]C. Bouvet, N. Hongkarnjanakul and S. Rivallant. Discrete ply modelling of low velocity impact and compression after impact in unidirectional laminated composites. Proceedings of ECCM 15 – 15th European Conference on Composite Materials, Venice, Italy, June 24-28 2012
[ACT31]B. Vieille, V.M. Casado and C. Bouvet. Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic- and thermosetting composites. Proceedings of 15th ECCM, Venice (Italy), June 24-28 2012
[ACT32]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. The effect of stacking sequence on the low-velocity impact response of composite laminates. Proceedings of ECCM 15 – 15th European Conference on Composite Materials, Venice, Italy, June 24-28 2012
[ACT33]C. Bouvet, S. Rivallant and N. Hongkarnjanakul. Effect of fibre failure on low velocity impact of composite laminate with different stacking sequences. Proceedings of ICMNMMCS, Torino, Italy, June 18-20 2012
[ACT34]T. Rouault, C. Bouvet, M. Bizeul, V. Nègre and P. Rauch. A bundle-scale model of propagation of a through-the-thickness notch in a woven composite under fatigue loading. Proceedings of 15th ECCM, Venice (Italy), June 24-28 2012
[ACT35]T. Rouault, C. Bouvet, V. Nègre and P. Rauch. Study of the crack growth in composite rotor blade skin. Proceedings of 38th European Rotorcraft Forum 2012
[ACT36]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Damage assessment of thin woven composite subjected to quasi-static tensile loading using infrared thermography. Proceedings of ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT37]A. Kolopp, S. Rivallant and C. Bouvet. Impact sur structures sandwich composites pour application de blindage aéronautique. Proceedings of JNC 17 - 17èmes Journées Nationales sur les Composites, Poitiers, France, 15-17 Juin 2011
[ACT38]A. Shahdin, J. Morlier, G. Michon, L. Mezeix, C. Bouvet and Y. Gourinat. Application of Modal Analysis for Evaluation of the Impact Resistance of Aerospace Sandwich Materials. Proceedings of 29th IMAC, A Conference on Structural Dynamics, Jacksonville USA p.171-177 2011 [DOI] [OATAO]
[ACT39]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus. Proceedings of JNC17-17émes journées nationales des composites 2011 [HAL]
[ACT40]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates. Proceedings of ICCS16, Porto (Portugal), 28-30 juin 2011
[ACT41]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Study of the fatigue crack growth in thin composite skins made of glass woven plies. Proceedings of 14th European Conference on Composite Materials ECCM, Budapest (Hungary), June 7-10 2010
[ACT42]L. Mézeix, D. Poquillon, C. Bouvet and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibres As Core Material: Processing And Mechanical Properties. Proceedings of Icss 9, Pasadena, California, June 14-16 2010
[ACT43]P. Rahmé, C. Bouvet, S. Rivallant, V. Fascio and G. Valembois. Mechanical Protection For Composite Structures Submitted To Low Energy Impact. Proceedings of ECCM 14 – 14th European Conference on Composite Materials, Budapest, Hungary, 7-10 June 2010
[ACT44]C. Bouvet, S. Rivallant and J.-J. Barrau. Modelling Of Impact Damage And Permanent Indentation On Laminate Composite Plate. Proceedings of ECCM 14 – 14th European Conference on Composite Materials, Budapest, Hungary, 7-10 June 2010
[ACT45]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Static & Dynamic Testing of Glass Fiber Entangled Sandwich Beams : A Comparison with Honeycomb & Foam Sandwich Beams. Proceedings of International Conference on Composite Structures /15, Porto 2009 [OATAO]
[ACT46]L. Mézeix, Y. Ping, C. Bouvet and D. Poquillon. Fiber Networks Made Of Entangled Cross-linked Fibers : Effect Of The Fiber Length And Of Mixing Different Fibers On Compression Properties. Proceedings of 7th Euromech Solid Mechanics Conference, Lisbonne, Portugal, September 2009
[ACT47]L. Mézeix, C. Bouvet, D. Poquillon and S. Crézé. Fibers networks as a new type of core material: processing and mechanical properties. Proceedings of Mrs, San Francisco (usa), 13-17 Avril 2009
[ACT48]E. Abi Abdallah, S. Rivallant, C. Bouvet, J.-J. Barrau and J.M. Buchin. A damage model for optimization of impacted CFR composite structures subjected to axial loading. Proceedings of 2nd AI4IA International Conference, Hannover, Germany, 14-15 May 2008
[ACT49]L. Mézeix, C. Bouvet and D. Poquillon. Fibers Networks As A New Type Of Core Material : Processing And Mechanical Properties. Proceedings of Fiber Society Fall 2008, Boucherville (canada), 30 Septembre-3 Octobre 2008
[ACT50]L. Mézeix, C. Bouvet, D. Poquillon and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibers As Core Material : Processing And Mechanical Properties. Proceedings of Icss8, Porto (portugal), 6-8 Mai 2008
[ACT51]C. Bouvet, B. Castanié and J.-J. Barrau. Modelling Of Impact Damage In Laminated Composites. Proceedings of Eccm13, Stockholm (suède), 2-5 Juin 2008
[ACT52]C. Bouvet, J.-J. Barrau and B. Castanié. Modélisation du dommage d’impact à l’aide d’éléments d’interface discrets. Proceedings of JNC 15, Marseille 6-8 Juin 2007. 2007
[ACT53]E. Abi Abdallah, S. Rivallant, C. Bouvet, J.-J. Barrau and J.-M. Buchin. The Influence Of Composite Tube Damage Tolerance On Compressive Residual Strength : Experimental Observation. Proceedings of 1st Ai4ia International Conference, Ostravice, Czech Republic, 19-23 February 2007
[ACT54]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core Crush Criteria To Determine The Strength Of Sandwich Composite Structures Subjected To Compression After Impact. Proceedings of Iccs-14, Melbourne (australia), 19-21 Novembre 2007
[ACT55]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Influence Of Woven Ply Degradation On Fatigue Crack Growth In Thin Notched Composites Under Tensile Loading. Proceedings of Icfc4, Kaiserslautern (allemagne), 26-28 Septembre 2007
[ACT56]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core crush criteria to determine the strength of sandwich composite structures subjected to compression after impact. Proceedings of ICCS-14, 14th International Conference on Composite Structure, 19-21 Novembre 2007, Melbourne, Australia 2007
[ACT57]B. Castanié, C. Bouvet, J.-J. Barrau and P. Thevenet. Multi-level modeling of low velocity, low energy impact on metal-skinned sandwich structure.. Proceedings of ESDA 2006 Engineering Systems Design and Analysis, Torino, Italy, 4-7 July 2006. 2006
[ACT58]S. Petit, A. Bergerot, C. Bouvet and J.-J. Barrau. Compression After Impact Of Composite Structures With Thermal Shield. Proceedings of 12th Eccm, Biarritz (france), 29 Août-1er Septembre 2006
[ACT59]S. Petit, A. Bergerot, C. Bouvet and J.-J. Barrau. Damage Tolerance For Composite Structures Of Launchers: Influence Of A Thermal Shield. Proceedings of 55th Iac, Vancouver (canada), 4-8 Octobre 2004

Communication sans actes dans un congrès international ou national

[COM1]F. Chatti, C. Bouvet, D. Poquillon, G. Michon and L. Meizeix. Numerical Modeling of porous materials made with entangled fibers network. Euromech 569 - Chatenay-Malabry - France 2016
[COM2]C. Bouvet, T. Lisle, M.-L. Pastor and P. Marguerès. MESURE PAR THERMOGRAPHIE INFRAROUGE DU TAUX DE RESTITUTION D'ÉNERGIE CRITIQUE DANS UN STRATIFIÉ COMPOSITE: CAS DE LA RUPTURE DE FIBRES EN COMPRESSION. CILSA – Journée Instrumentation, traitement du signal et modélisation des sources acoutisques dans les matériaux composites 2014
[COM3]C. Bouvet, S. Rivallant, J.-J. Barrau, N. Hongkarnjanakul, B. Castanié, H. Abdulhamid, T. Lisle, E. Abi Abdallah, B. Ostre and S. Petit. Discrete ply modelling of impact and compression after impact on composite laminates. Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July 2014
[COM4]C. Bouvet, S. Rivallant and J.-J. Barrau. Low velocity impact modelling in laminate composites and permanent indentation. Workshop ICA-ONR « dynamic failure of composite and sandwich structure », Toulouse, France, 23-24 June 2011

Communication par poster dans un congrès international ou national

[AFF1]J.-E. Chambe, C. Bouvet, J.-F. Ferrero and O. Dorival. Energy dissipation during tubular structures crash for aircraft seats development. JNC 20 : Journées Nationales sur les Composites 2017 2017
[AFF2]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge . Journées Nationales sur les Composites 2015
[AFF3]A. Shahdin, L. Mezeix, J. Morlier, Y. Gourinat and C. Bouvet. Diagnosis of the Fabrication Process of Sandwich Structures with Fiber Network Core with the help of Vibration Testing. 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London 2009

Chapitre d'ouvrage scientifique

[OSC1]C. Bouvet. Tolérance aux dommages d’impact des structures composites aéronautiques. In book Techniques de l'Ingénieur, p.article TRP4042. Ed. Techniques de l'Ingénieur. 2016
[OSC2]C. Bouvet, N. Hongkarnjanakul, S. Rivallant and J.-J. Barrau. Discrete Impact Modeling of Inter- and Intra-laminar Failure in Composites. In book Dynamic Failure of Composite and Sandwich Structures, Chap. 8, p.339-392. Ed. Springer. 2013 ISBN:978-94-007-5328-0
[OSC3]R. Zitoune, A. Mir, B. Hachemane, F. Boyer, C. Bouvet, F. Collombet and B. Bezzazi. chapter 5: Static and dynamic behaviours of composite laminate. In book Fiber reinforced composites, Chap. 5, p.. Ed. Nova publishers. 2011

Ouvrage de vulgarisation (ou chapitre)

[OV1]B. Castanié, C. Bouvet and D. Guedra-degeorges. Structures en Matériaux Composites Stratifiés. Ed. Techniques de l'Ingénieur 2013

Thèse de Doctorat ou HdR

[TH1]C. Bouvet. Etude de l'endommagement dans les structures composites. Habilitation à diriger des recherches, Université Paul Sabatier. 2009

Brevet

[BR1]L. Mézeix, C. Bouvet, D. Poquillon, V. Fascio, P. Vié and J.-L. Brian. Matériau d’âme à base de fibres enchevêtrées et billes. Brevet No.FR 2 939 077-A1, 2008



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80