Francis Collombet




Professeur - Institut Universitaire de Technologie en Génie Mécanique et Productique de Toulouse (IUT GMP)
Membre du groupe Matériaux et Structures Composites (MSC)

☎ +33 (0) 5 61 17 11 69 (recherche)
☎ +33 (0) 6 80 68 08 88 (enseignement)

Production scientifique

130 contributions

Article de revue internationale avec comité de lecture

[ACL1]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Spatial Evolution of the Thickness Variations over a CFRP Laminated Structure. Applied Composite Materials. 24(5)1201-1215. 2017 [DOI]
[ACL2]M. Barus, H. Welemane, V. Nassiet, M.-L. Pastor, A. Cantarel, F. Collombet, L. Crouzeix and Y.-H. Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography. NDT & E International. , . 2017
[ACL3]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Identification and modelling of the in-plane reinforcement orientation variations in a CFRP laminate produced by manual lay-up. Applied Composite Materials. , . 2017 [DOI]
[ACL4]L. Toubal, R. Zitoune, F. Collombet and N. Rocher Gleizes. Moisture Effects on the Material Properties of a Jute/Epoxy Laminate: Impulse Excitation Technique Contribution. Journal of Natural Fibers. , 1-14. 2017 [DOI]
[ACL5]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Assessments on the mechanical behaviour of a monolithic composite structure instrumented with a monitoring patch. Journal of Composite Materials. , . 2017 [DOI]
[ACL6]R. Zitoune, N. Cadorin, F. Collombet and M. Sima. Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: In situ measurement by optical fiber. Wear. 376–377, 1849-1858. 2017
[ACL7]A. Hejjaji, R. Zitoune, L. Crouzeix, S. Le Roux and F. Collombet. Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior. Wear. 376-377, 1356-1364. 2017 [DOI]
[ACL8]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, L. Crouzeix, Y.-H. Grunevald and V. Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography. NDT & E International. 85, 27-33. 2016 [DOI]
[ACL9]R. Zitoune, K. Vijayan, F. Collombet and S. Le Roux. Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks. Composite Structures. 146(20)148-158. 2016 [DOI]
[ACL10]M. Torres, F. Collombet, B. Douchin, L. Crouzeix, Y.-H. Grunevald, J. Lubin and T. Camps. Monitoring of the curing process of composite structures by tunnelling junction sensors. Sensors and Actuators, A: Physical. 235, 256-264. 2015 [DOI]
[ACL11]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Numerical and experimental value added of Multi-Instrumented Technological Evaluator for the analysis of thick monolithic composite structures with singularity details. Composite Structures. 127, 41-50. 2015 [DOI]
[ACL12]A. Beddiar, R. Zitoune, F. Collombet, Y.-H. Grunevald, T. Abadlia and N. Bourahla. Compressive behaviour of concrete elements confined with GFRP-prefabricated bonded shells. European Journal of Environmental and Civil Engineering. 19(1)65-88. 2015 [DOI]
[ACL13]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Comparison between the classic sensor embedding method and the monitoring patch embedding method for composites instrumentation. Applied Composite Materials. 21(5)707-724. 2014 [DOI]
[ACL14]N. Cadorin, R. Zitoune, P. Seitier and F. Collombet. Analysis of damage mechanism and tool wear while drilling of 3D woven composite materials using internal and external cutting fluid. Journal of Composite Materials. In press, . 2014 [DOI]
[ACL15]F. Cénac, R. Zitoune, F. Collombet and M. Deleris. Abrasive Water-Jet milling of aeronautic aluminum 2024-T3. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 227(3). 2013 [DOI]
[ACL16]M. Torres, L. Crouzeix, F. Collombet, B. Douchin and Y.-H. Grunevald. Mechanical characterization of an alternative technique to embed sensors in composite structures: the monitoring patch. Applied Composite Materials. 19(3-4)379-391. 2012 [DOI]
[ACL17]R. Zitoune, V. Krishnaraj, S. Almabouacif, F. Collombet, M. Sima and A. Jolin. Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich. Composites Part B: Engineering. 43(3)1480-1488. 2012 [DOI]
[ACL18]L. Crouzeix, F. Cenac, F. Collombet, R. Zitoune, Y.-H. Grunevald and M. Déléris. Comportement d’une réparation en escalier obtenue par Jet d’Eau Abrasif. Matériaux et Techniques. 100, 681–690. 2012
[ACL19]A. Mir, B. Bezzazi, R. Zitoune and F. Collombet. Study of mechanical and hygrothermal properties of agglomerated cork. Mechanika. 1, 40-45. 2012 [DOI]
[ACL20]R. Zitoune, L. Crouzeix, F. Collombet, T. Tamine and Y.H. Grunevald. Behaviour of composite plates with drilled and moulded hole under tensile load. Composite Structures. 93(9)2384-2391. 2011 [DOI]
[ACL21]M. Torres Arellano, L. Crouzeix, B. Douchin, F. Collombet, H. Hernandez-Moreno and J.-L. Gonzalez-Velazquez. Strain field measurment of filament-wound composites at ±55° using digital image correlation: an approach for unit cells employing flat specimens. Composite Structures. 92(10)2457-2464. 2010 [DOI]
[ACL22]A. Mir, R. Zitoune, F. Collombet and B. Bezzazi. Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate. Journal of Reinforced plastics and composites. 11(29)1669-1680. 2010 [DOI]
[ACL23]R. Zitoune, V. Krishnaraj and F. Collombet. Study of drilling of composite material and aluminium stack. Composite Structures. 92(5)1246-1255. 2010 [DOI]
[ACL24]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification of a macroscopic anisotropic damage model using digital image correlation and the equilibrium gap method. European Journal of Computational Mechanics. 19(1-2-3)229-240. 2010 [DOI]
[ACL25]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Measuring strains through the thickness of a composite structural specimen subjected to bending. Experimental Mechanics. 49(6)877-880. 2009 [DOI]
[ACL26]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending. Composite Structures. 91(1)48-55. 2009 [DOI]
[ACL27]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material. Composites Part - A: Applied Science and Manufacturing. 40(11)1732–1740. 2009 [DOI]
[ACL28]M. Mulle, F. Collombet, P. Olivier, R. Zitoune, C. Huchette, F. Laurin and Y.H. Grunevald. Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen. Composites Part - A: Applied Science and Manufacturing. 40(10)1534-1544. 2009 [DOI]
[ACL29]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse, P. Davies and J.-L. Gonzalez-Velazquez. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: II. Process monitoring. Applied Composite Materials. 16(4)197-209. 2009 [DOI]
[ACL30]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse and P. Davies. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: III. In-service external pressure loading. Applied Composite Materials. 16(3)135-147. 2009 [DOI]
[ACL31]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse, P. Davies and J.-L. Gonzalez-Velazquez. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: I. Adapted tooling and instrumented specimen. Applied Composite Materials. 16(3)173-182. 2009 [DOI]
[ACL32]P. Marguerès, J.-N. Périé, J.G. Perez, F. Collombet and Y.-H. Grunevald. Characterization of a composite structure obtained by RFI using HexFIT (R) semi-products. Composites Science and Technology. 69(1)117-124. 2009 [DOI]
[ACL33]M. Mulle, F. Collombet, P. Olivier and Y.H. Grunevald. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen. Composites Part - A: Applied Science and Manufacturing. 40(1)94-104. 2009 [DOI]
[ACL34]H. Hernandez-moreno, B. Douchin, F. Collombet, P. Davies and D. Choqueuse. Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Composites Science and Technology. 68(3-4)1015-1024. 2008 [DOI]
[ACL35]R. Zitoune, F. Collombet and G. Hernaiz Lopez. Experimental and analytical study of the influence of HexFit® glass fiber composite manufacturing process on delamination during drilling. International Journal of Machining and Machinability of Materials. 3(3/4)326-342. 2008 [DOI]
[ACL36]P. Marguerès, J. Lopez-torres, J.-N. Périé, K. Syed Muhammad and F. Collombet. Combined approach for the characterization of composites manufactured by RFI and industrial application. Journal of Composite Materials. 42(2)189-209. 2008 [DOI]
[ACL37]R. Zitoune and F. Collombet. Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures. Composites Part - A: Applied Science and Manufacturing. 38(3)858-866. 2007 [DOI]
[ACL38]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Development of instrumented composite cylinders. Materials Science Forum. 560, 59-66. 2007 [DOI]
[ACL39]M. Mulle, R. Zitoune, F. Collombet, P. Olivier and Y.H. Grunevald. Thermal expansion of carbon–epoxy laminates measured with embedded FBGS – Comparison with other experimental techniques and numerical simulation. Composites Part - A: Applied Science and Manufacturing. 38(5)1414-1424. 2007 [DOI]
[ACL40]F. Collombet, M. Mulle, Y.-H. Grunevald and R. Zitoune. Multiscale method for optimal design of composite structures incorporating sensors. Solid Mechanics and Its Applications . 135, 141-149. 2006 [DOI]
[ACL41]R. Zitoune, F. Collombet, R. Piquet, F. Lachaud and P. Pasquet. Experiment–calculation comparison of the cutting conditions representative of the long fiber composite drilling phase. Composites Science and Technology. 65(3/4). 2005 [DOI]
[ACL42]F. Lachaud, R. Piquet, F. Collombet and L. Surcin. Drilling of composites structures. Composite Structures. 52(3-4)551-566. 2001

Article de revue avec comité de lecture non répertorié

[ACLN1]R. Zitoune, S. Almabouacif, F. Collombet and H. Bouguerara. Optimization of twist drill geometry for drilling CFRP and multi-material made of CFRP/Al. International Journal of Materials, Mechanics and Manufacturing. 2(4). 2014 [DOI]
[ACLN2]F. Collombet, L. Crouzeix, F. Cénac, Y.-H. Grunevald, Y. Davila, A. Cerisier and B. Douchin. Usinage par jet d’eau abrasif pour la réparation de pièces composites primaires aéronautiques. Revue des Composites et des Materiaux Avances. 23(3)459-482. 2013 [DOI]
[ACLN3]K. Vijayan, R. Zitoune and F. Collombet. Study of Drilling of Multi-Material (CFRP/Al) using Taguchi and Statistical Techniques. Journal of Materials Science. (2)95-109. 2012
[ACLN4]K. Vijayan, R. Zitoune and F. Collombet. Comprehensive Review on Drilling of Multimaterials Stacks. Journal of Machining and Forming Technologies. 2(3/4) 171-200. 2010
[ACLN5]M. Mulle, F. Collombet, B. Trarieux, J.-N. Périé and Y.-H. Grunevald. Démonstrateur technologique multi-instrumenté (réseaux de Bragg et mesure de champs). Vers un dialogue essais/calculs multi-échelle. Revue des Composites et des Materiaux Avances. 15(1)33-51. 2005 [DOI]
[ACLN6]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI avec le matériau HexFITTM. Revue des Composites et des Materiaux Avances. 15(3)401-412. 2005 [DOI]
[ACLN7]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Caractérisation de l’état initial de tubes composites : maîtrise du placement des renforts et suivi de la cuisson par fibres optiques à réseaux de bragg. Revue des Composites et des Materiaux Avances. 15(2)245-261. 2005 [DOI]
[ACLN8]R. Zitoune and F. Collombet. Comparaison expérience Calcul numérique des endommagements induits par perçage de structures composites fibres longues en Carbone/Epoxy. Revue des Composites et des Materiaux Avances. 15(1)105-125. 2005
[ACLN9]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.H. Grunevald. Mesures de champs par stéréocorrélation sur éprouvettes technologiques composites instrumentées par capteurs à fibre optique à réseaux de Bragg : comparaison et validation des mesures. Instrumentation Mesure Metrologie. 4(3-4)167-192. 2004
[ACLN10]C. Espinosa and F. Collombet. Impact de plaques composites : caractérisation et modèles. Journal De Physique, III. 1, 1953-1968. 1991 [DOI]

Communication invitée dans un congrès national ou international

[INV1]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, T. Geernaert, S. Sulejmani, S. Eve, M. Gomina, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Embedded fiber Bragg gratings in photonic crystal fiber for cure cycle monitoring of carbon fiber-reinforced polymer materials. Proc. SPIE 8775, Micro-structured and Specialty Optical Fibres II. Prague, Czech Republic, April 15, 2013 Invited lecture 2013 [DOI]
[INV2]F. Collombet, L. Crouzeix, Y.-H. Grunevald, B. Douchin, Y. Davila, M. Torres and H. Zeng. Large repair for aeronautics’ primary principal composite structures. International Symposium on Aircraft Materials ACMA 2012, Fez (Morocco). Invited plenary lecture 2012
[INV3]F. Collombet, M. Mulle, H. Hernandez-moreno, R. Zitoune, B. Douchin and Y.-H. Grunevald. Benefit from embedded sensors to study polymeric composite structures. Proceedings of AIQ-ICF2008 – The first African InterQuadrennial ICF conference, Alger (Algeria). Invited lecture p.485-496 2008 [DOI]
[INV4]F. Collombet, B. Douchin, P. Davies and F. Malaise. Loading rate effects on multiscale materials and structures. some experimental, theoretical and numerical problems. Proceedings of IASS Symposium on Lightweight Structures in Civil Engineering, Warsaw (Poland) Invited lecture p.697-706 2002

Communication avec actes dans un congrès international ou national

[ACT1]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, V. Nassiet, L. Crouzeix and Y.-H. Grunevald. A new NDT method for the study of composite bonded repair. Proceedings of 17th European Conference on Composite Materials (ECCM17) 2016
[ACT2]A. Hajjaji, R. Zitoune, L. Crouzeix, F. Collombet and S. Le Roux. Impact of the abrasive water jet milling process on the damage and surface characteristics of CFRP composite.. Proceedings of 17th european conference on composites materials. Munich 2016
[ACT3]M. Barus, F. Collombet, H. Welemane, L. Crouzeix, A. Cantarel, Y.-H. Grunevald, V. Nassiet and M.-L. Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials. Proceedings of 20th International Conference on Composite Materials 2015 [OATAO]
[ACT4]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. Conception Numérique d’un évaluateur technologique de grande dimension en composite pour la réparation collée. Proceedings of 19èmes Journées Nationales sur les Composites p.355-364 2015
[ACT5]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Simulation numérique avec prise en compte de la continuité spatiale des variabilités réparties sur évaluateurs CFRP. Proceedings of JNC19 - 19èmes Journées Nationales sur les Composites, Lyon (France) 2015
[ACT6]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. Toward a numerical conception of a technological evaluator for composite structural repair: shear characterization. Proceedings of The sixteenth European Conference for Composite Materials 2014
[ACT7]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Multi-instrumented technical evaluator for the analysis of composites structures, numerical and experimental approach. Proceedings of MECHCOMP2014 - The 1st International Conference on Mechanics of Composites, Long Island (USA), June 8-12 2014
[ACT8]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. TOWARD A MULTI-LEVEL EVALUATION OF BONDED REPAIRS FOR COMPOSITE ASSEMBLY: SHEAR CHARACTERIZATION. Proceedings of SEICO 13, SAMPE EUROPE 35th 2014
[ACT9]R. Zitoune, V. Krishnaraj, S. Almabouacif and F. Collombet. DESIGN OF DOUBLE CONE TWIST DRILL GEOMETRY TO IMPROVE THE HOLES QUALITY WHILE DRILLING IN MULTI-STACK MADE OF CFRP/AL. Proceedings of Proceedings of International Mechanical Engineering Congress and Exposition. P. IMECE2014-36526 2014
[ACT10]M. Torres, F. Collombet, B. Douchin, L. Crouzeix, R. Bazer-bachi, Y.-H. Grunevald, J. Lubin, T. Camps, X. Jacob, S. Rodriguez and K.-T. Wu. Monitoring of the curing process of an industrial composite structure by TJS and FUT. Proceedings of 35CIMM - 35 Congreso Internacional de Metalurgia y Materiales, Saltillo (Mexico) 2013
[ACT11]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Quantification of sources of variability in CRFP plates cured in autoclave. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.2560-2567 2013
[ACT12]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, S. Rodriguez, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Cure monitoring of an autoclave manufactured industrial part: added value of complementary instrumentation. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.1178-1187 2013
[ACT13]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, T. Geernaert, S. Sulejmani, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Cure cycle monitoring of laminated carbon fiber-reinforced plastic by fiber Bragg gratings in microstructured optical fiber. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.3327-3335 2013
[ACT14]N. Cadorin, R. Zitoune, F. Collombet, B. Castanié and M. Seve. Influence of cutting parameters and wear in drilling of 3D wowen carbon/epoxy composite. Proceedings of 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2 2013
[ACT15]N. Cadorin, R. Zitoune, B. Castanié, F. Collombet and M. Seve. Etude expérimentale de l'influence des paramètres de coupe et de l'usure de l'outil sur la qualité de percage d'un composite tissé 3D.. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT16]L. Crouzeix, Y. Davila, B. Douchin, F. Collombet and Y.-H. Grunevald. Evaluation numérique et expérimentale d’une réparation en double escalier sous chargements combinées. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT17]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Des avancées dans le suivi de cuisson des pièces composites. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT18]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Etude des sources de variabilités d’une structure composite CFRP réalisée en autoclave. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT19]F. Collombet, L. Crouzeix, Y. Davila, A. Cerisier, B. Douchin and Y.-H. Grunevald. Added value of technological evaluators for structural repair characterization: MITE Toolbox. Proceedings of SEICO13 – Sampe Europe 34th International Conference & Forum, Paris (France), March 11-12 p.179-186 2013
[ACT20]L. Crouzeix, Y. Davila, F. Collombet, B. Douchin, Y.-H. Grunevald and R. Zitoune. Study of step-lap repairs from elementary coupons to structural evaluators. Proceedings of SEICO13 – Sampe Europe 34th International Conference & Forum, Paris (France), March 11-12 p.167-172 2013
[ACT21]F. Collombet, L. Crouzeix, Y.-H. Grunevald, H. Zeng, Y. Davila, B. Douchin and A. Gillet. Primary principal composite structure repair with multi-instrumented technological evaluator tool box. Proceedings of ECCM15 - The 15th European Conference on Composite Materials, Venice (Italy), June 24-28 2012
[ACT22]L. Crouzeix, Y. Davila, F. Collombet, B. Douchin, Y.-H. Grunevald, R. Zitoune and F. Cénac. Study of double step lap composite repairs on CFRP evaluators. Proceedings of ECCM15 - The 15th European Conference on Composite Materials, Venice (Italy), June 24-28. 2012
[ACT23]F. Collombet, G. Luyckx, C. Sonnenfeld, N. Lammens, Y.-H. Grunevald, M. Torres, Y. Davila, B. Douchin, L. Crouzeix, H. Hernandez-moreno, R. Zitoune and R. Bazer-bachi. Embedded instrumentation: from coupon level to a representative composite part. Proceedings of SEICO12 - Sampe Europe 33rd International Technical Conference & Forum, Paris (France) p.262-291 2012
[ACT24]M. Torres, B. Douchin, F. Collombet, L. Crouzeix, Y.-H. Grunevald, R. Bazer-bachi and T. Camps. Study of the parameters variability of monitoring patch used in composites instrumentation. Proceedings of 16th ICCS, International Conference on Composite Structures, Porto, Portugal. 2011
[ACT25]M. Torres, B. Douchin, F. Collombet, L. Crouzeix, Y.-H. Grunevald, R. Bazer-bachi, J. Lubin and T. Camps. Valeur ajoutée d’une encapsulation de capteurs silicium pour l’instrumentation à coeur des structures composites. Proceedings of the 17th JNC, Journées Nationales sur les Composites, Poitiers, France. 2011 [HAL]
[ACT26]M. Torres, L. Crouzeix, F. Collombet, B. Douchin and Y.-H. Grunevald. Mechanical performance of composite structures with embedded silica sensors: concept of monitoring patch. Proceedings of the 14th ECCM, European Conference on Composite Materials, Budapest, Hungary. 2010
[ACT27]L. Crouzeix, M Torres, B Douchin, J-N périé, F Collombet and H. Hernandez-moreno. Assessment of the winding pattern effects on the behaviour of filament wound pipes by using full field measurements and the equilibrium gap method. Proceedings of ICCM17 - 17th International Conférence on Composite Materials, Edinburgh (UK) 2009
[ACT28]M. Torres, L. Crouzeix, B. Douchin, F. Collombet, H. Hernandez-moreno and J.-L. Gonzalez-velazquez. Strain field characterization of filament winding pattern at ±55° using numerical image correlation. Proceedings of the 17th ICCM, International Conference on Composite Materials, Edinburgh, Scotland. 2009
[ACT29]L. Crouzeix, J.-N. Périé, M. Torres, B. Douchin, F. Collombet and H. Hernandez-moreno. Utilisation de la stéréo corrélation d’images numériques et de la méthode de l’écart à l’équilibre pour la caractérisation mécanique de tubes obtenus par enroulement filamentaire. Proceedings of JNC16 - 16èmes Journées Nationales sur les Composites, Toulouse (France). 2009 [HAL]
[ACT30]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification de lois d’endommagement anisotrope à partir de mesures de champs de déplacements - version orthotrope de l’ ”Equilibrium Gap Method”. Proceedings of 9ème colloque national en calcul des structures, Giens (France) p.213-218 2009
[ACT31]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. hrough-the-thickness material properties identification using 3D-DIC and FBG measurements. Proceedings of 13th European Conference on Composite Materials (ECCM13), Stockholm, Sweden, June 2008
[ACT32]P. Olivier, B. Mascaro, P. Marguerès and F. Collombet. Cfrp with voids: ultrasonic characterization of localized porosity, acceptance criteria and mechanical characteristics. Proceedings of ICCM16-16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Kyoto, Japan 2007
[ACT33]F. Collombet, M. Mulle, H. Hernandez-moreno, B. Douchin, R. Zitoune, P. Olivier and Y.-H. Grunevald. On the use of optical fibres with bragg gratings for the identification of process-properties relations of composite structures. Proceedings of ICCM16 – The 16th International Conference on Composite Materials, Kyoto (Japan) 2007
[ACT34]F. Collombet, M. Mulle, H. Hernandez-moreno, B. Douchin, R. Zitoune, P. Olivier and Y.-H. Grunevald. De l'utilisation des fibres optiques à réseaux de Bragg pour l'établissement de relations procédé-propriétés des structures composites. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.975-982 2007
[ACT35]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Identification de propriétés matériau sur éprouvette technologique par croisement des mesures par stéréo-corrélation d’images numériques et réseaux de Bragg avec le modèle numérique associé. Proceedings of 15èmes Journées Nationales sur les Composites (JNC'15), Marseille (France), 6-8 juin 2007
[ACT36]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Caractérisation d’un matériau HexMC : identification de propriétés mécaniques par l’utilisation de mesures de champs de déplacements et de mesures ultrasonores. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.725-732 2007
[ACT37]H. Hernandez-moreno, B. Douchin, F. Collombet, D. Choqueuse and P. Davies. Monitoring par fibres optiques à réseaux de Bragg de l'enroulement filamentaire de tubes composites. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.773-780 2007
[ACT38]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Utilisation de champs de déplacements pour l’identification de propriétés élastiques en milieux hétérogènes. Proceedings of 8ème colloque national en calcul des structures, Giens (France) p.241-247 2007
[ACT39]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Déformations à coeur et en surface sur éprouvette technologique en composite - Essai de flexion 3 et 4 points. Proceedings of 8ème Colloque National en Calcul des Structures, Giens, France, mai 2007
[ACT40]H. Hernandez-moreno, B. Douchin, F. Collombet, D. Choqueuse and P. Davies. Flambage de structures composites tubulaires sous pression externe : Construction de champs par corrélation calculs analytiques - essais. Proceedings of 8ème colloque national en calcul des structures, Giens (France) p.567-572 2007
[ACT41]P. Olivier, P. Marguerès, B. Mascaro and F. Collombet. Porosités dans les stratifiés carbone/polymère : critère d’admissibilité et modélisation des propriétés mécaniques. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.73-80 2007
[ACT42]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de déformation à coeur sur éprouvette technologique durant la cuisson autoclave puis des essais de flexion 3 et 4 points. Proceedings of 1er Congrès Méditerranéen sur les Matériaux Composites (C2MC1), Béchar, Algérie, décembre 2006
[ACT43]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. Structural testing on a multi instrumented filament winding pipe: towards the identification of mechanical properties. Proceedings of ECCM12 - The 12th European Conference on Composite Materials, Biarritz (France) 2006
[ACT44]P. Olivier, P. Marguerès, B. Mascaro, K.E. Tarsha-kurdi and F. Collombet. Assessment of the effects of voids on some physical, mechanical and damage mechanics properties of carbon/polymeric composites.. Proceedings of ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006
[ACT45]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. On the identification of mechanical properties using structural tests and optical methods. Proceedings of SEM 2006 – annual conference of the Society for Experimental Mechanics, St. Louis, Missouri (USA) 2006
[ACT46]P. Marguerès, P. Olivier, B. Mascaro and F. Collombet. Critère d'admissibilité des porosités dans des composites carbone/époxyde. Proceedings of C2MC1-1er Congrès Méditerranéen sur Les Matériaux Composites, Béchar, Algérie 2006
[ACT47]P. Marguerès, J.-N. Périé, Julian Perez, F. Collombet and Y.-H. Grunevald. Caractérisation d'une structure composite obtenue par RFI à partir d'un nouveau matériau. Proceedings of JNC 14 - 14èmes Journées Nationales sur les Composites, Compiègne, France 2005
[ACT48]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.-H. Grunevald. Instrumentations combinées (fibres optiques à réseaux de Bragg et corrélation d'images numériques) pour l’analyse multi-échelle du comportement de démonstrateurs technologiques. Proceedings of 14èmes Journées Nationales sur les Composites (JNC 14), Compiègne, France, mars 2005
[ACT49]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Analyse de l’architecture du renfort des tubes réalisés par enroulement filamentaire. Proceedings of JNC14 - 14èmes Journées Nationales sur les Composites, Compiègne (France) p.119-127 2005
[ACT50]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI. Proceedings of Journée Scientifique et Technique (JST) "Mise en forme des matériaux composites", Le Havre, France 2004 [DOI]
[ACT51]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Precise positioning of unit cells and embedded instrumentation for fabrication and pressure testing of filament wound tubes. Proceedings of ECCM11 - The 11th European Conference on Composite Materials, Rhodes (Greece) 2004
[ACT52]M. Mulle, L. Robert, J.-N. Périé and F. Collombet. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation de métrologies. Proceedings of Colloque Photomécanique 2004, Albi, France 2004
[ACT53]E. Haramburu, F. Collombet, B. Ferret, J.-S. Vignes, P. Devos, C. Levaillant and F. Schmidt. Short-fibre Reinforced Thermoplastic for Semi-structural Parts: Process-properties. Proceedings of 8th Euro-Japanese Symposium 2002
[ACT54]F. Collombet and C. Espinosa. Simulation of through matrix cracking damage history sustained by laminated composite plates during transverse impact. Proceedings of ISIE Sendai 2-4 Novembre 1992 p.412-417 1992
[ACT55]C. Espinosa, F. Collombet and J.-L. Lataillade. Simulation of matrix cracking damage history sustained of laminated composite plates during transverse impact. Proceedings of ECCM 5 Bordeaux, 7-10 April 1992 p.83-88 1992
[ACT56]C. Espinosa, F. Collombet and J.-L. Lataillade. Endommagement de composites unidirectionnels par fissuration d'impact. Proceedings of 10ème Congrès Français de Mécanique, Paris, 2-6 septembre 1991 1991

Communication sans actes dans un congrès international ou national

[COM1]F. Collombet, L. Crouzeix, Y.-H. Grunevald, A. Cerisier, R. Zitoune, Y. Davila and B. Douchin. Repair of primary composite structures - a challenge in aeronautics for the composite solution. Franco-Chinese Symposium on Damage and Fracture of Composite Structures: Assessment and Monitoring, Tarbes (France), July 14 - 17 2015
[COM2]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, N. Lammens, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Exploiting the temperature insensitivity of the modal birefringence of micro-structured fibre Bragg gratings for cure cycle monitoring. European Workshop on the use of Optical Fibres for monitoring Composites manufacturing process, Toulouse (France), 28-29 nov. 2012
[COM3]F. Collombet, Y.-H. Grunevald, M. Mulle, T. Chauvin, S. Casal and B. Douchin. Multi instrumented technological evaluators, new tools to develop innovative embedded instrumentations and to emphasize interests of technological gaps during design of smart primary composite structures. The Fifth Korea-France Joint Workshop on Composite Materials, Daejeon (Korea) 2007
[COM4]Y.-H. Grunevald, F. Collombet, B. Douchin and J.-L. Gonzalez-velazquez. Techno-economical optimization of non flush fast repairing patches for pipelines usable in severe onshore environments. Bonded Composite Patch Seminar, CEAT Toulouse (France) 2007
[COM5]J. Lopez Torres, P. Marguerès and F. Collombet. Etude de la fabrication d'un coin de malle par rfi. Journée Scientifique de l’ONERA- Journée Scientifique et Technique de l’AMAC "Mise en Forme des Matériaux Composites", Châtillon, France 2006
[COM6]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Desarrollo de un modelo de elementos finitos para análisis del comportamiento mecánico de tubos de material compuesto. IBEROMET IX – IX Congreso iberoamericano de metalurgia y materiales, Habana (Cuba) 2006
[COM7]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Development of instrumented composite cylinders. IMRC2006 - International Materials Research Congress, Cancún Quintana Roo (México) 2006
[COM8]H. Hernandez-moreno, B. Douchin, F. Collombet, J. Bauw and P. Davies. Influence de la mésostructure sur le comportement mécanique de tubes instrumentés à coeur fabriqués par enroulement filamentaire. Journées Scientifiques et Techniques de l'AMAC : « Dialogue Essai/Calcul dans les Structures Hétérogènes », Blois (France) 2004

Communication par poster dans un congrès international ou national

[AFF1]A. Cerisier, F. Collombet, L. Crouzeix and Y.-H. Grunevald. Vers une méthodologie robuste pour la réparation de pièces composites primaires aéronautiques. JNC 18, Nantes 2013
[AFF2]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, S. Sulejmani, T. Geernaert, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Integration of microstructured optical fibres into carbon fibre reinforced plastic materials - determination of the initial strain state. CompTest 2013 - 6th International Conference on Composites Testing and Model Identification, Aalborg (Denmark), 22-24 April 2013
[AFF3]J. Lopez Torres, P. Marguerès and F. Collombet. Study for manufacturng a corner fitting obtained by resin film infusion process.. ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006

Chapitre d'ouvrage scientifique

[OSC1]F. Collombet, Y.-H. Grunevald, L. Crouzeix, B. Douchin, R. Zitoune, Y. Davila, A. Cerisier and R. Thévenin. Repairing composites. In book Advances in Composites Manufacturing and Process Design, Chap. 10, p.197-227. Ed. © 2015 Elsevier Ltd. 2015 ISBN:978-1-78242-307-2 [DOI]
[OSC2]P. Olivier, M. Mulle, C. Paris and F. Collombet. Carbon/polymeric composites autoclave cure monitoring with optical Fiber Bragg Grating (FBG) sensors. In book Wiley Encyclopedia of Composites, p.230-240. Ed. Edited by L. Nicolais - WILEY Publishing Co June 2012. 2012 ISBN:978-0-470-12828-2
[OSC3]R. Zitoune, A. Mir, B. Hachemane, F. Boyer, C. Bouvet, F. Collombet and B. Bezzazi. chapter 5: Static and dynamic behaviours of composite laminate. In book Fiber reinforced composites, Chap. 5, p.. Ed. Nova publishers. 2011
[OSC4]F. Collombet, M. Mulle, H. Hernandez-moreno, R. Zitoune, B. Douchin and Y.-H. Grunevald. Benefit from embedded sensors to study polymeric composite structures. In book Damage and fracture mechanics - failure analysis of engineering materials and structures, p.485-496. Ed. Boukharouba Et Al Editor. 2009 ISBN:978-90-481-2668-2
[OSC5]F. Cènac, F. Collombet, M. Deliris and R. Zitoune. Abrasive Water Jet Machining of Composites. In book Machining Composite Materials, Chap. 4, p.167-180. Ed. Hardback. 2009 ISBN:9781848211704

Ouvrage de vulgarisation (ou chapitre)

[OV1]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation des mesures. Ed. Essais Industriels N°32 pages 10-16 2005
[OV2]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesure de champs et fibres optiques à réseaux de Bragg. Ed. Photoniques - La Revue de la Société Française d'Optique N°16 p. 39-41 2004



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80