Frédéric Monies




Maître de conférences à l'Université Paul Sabatier (UPS)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)



Production scientifique

33 contributions

Article de revue internationale avec comité de lecture

[ACL1]F. Monies, I. Danis, P. Lagarrigue, P. Gilles and W. Rubio. Balancing of the transversal cutting force for pocket milling cutters: application for roughing a magnesium-rare earth alloy. International Journal of Advanced Manufacturing Technology. 89(1)45-64. 2017 [DOI]
[ACL2]I. Danis, F. Monies, P. Lagarrigue and N. Wojtowicz. Cutting forces and their modelling in plunge milling of magnesium-rare earth alloys. International Journal of Advanced Manufacturing Technology. 84(9-12)1801-1820. 2016 [DOI]
[ACL3]S. Cafieri, F. Monies, M. Mongeau and C. Bes. Plunge milling time optimization via mixed-integer nonlinear programming. Computers and Industrial Engineering. 98, 434-445. 2016
[ACL4]K. Moussaoui, F. Monies, M. Mousseigne, P. Gilles and W. Rubio. Balancing of the transverse cutting force during inclined milling and effect on the tool wear : applied to a Ti6Al4V. International Journal of Advanced Manufacturing Technology. 82(9-12)1859-1880. 2016 [DOI]
[ACL5]P. Gilles, G. Cohen, F. Monies and W. Rubio. Machining strategy in five-axis milling using balance of the transversal cutting force. International Journal of Advanced Manufacturing Technology. 72(9-12)1377-1387. 2014 [DOI]
[ACL6]I. Danis, N. Wojtowicz, F. Monies and P. Lagarrigue. Influence of dry plunge-milling conditions on surface integrity of magnesium alloys. International Journal of Mechatronics and Manufacturing Systems. 7(2-3)141-156. 2014 [DOI]
[ACL7]J. Senatore, K. Moussaoui, S. Segonds, F. Monies and W. Rubio. Analysis of drift in iso-scallop planning – Machining by regions. International Journal of Advanced Manufacturing Technology. 67, 719-732. 2013
[ACL8]S. Segonds, C. Bes, F. Monies and J.-M. Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel. International Journal of Manufacturing Research. 8(3)277 - 295. 2013 [DOI]
[ACL9]P. Gilles, G. Cohen, F. Monies and W. Rubio. Torus cutter positioning in 5-axis milling using balance of the transversal cutting force. International Journal of Advanced Manufacturing Technology. 66(5-8)965-973. 2013 [DOI]
[ACL10]K. Moussaoui, M. Mousseigne, J. Senatore, R. Chieragatti and F. Monies. Influence of milling on surface integrity of Ti6Al4V - Study of the metallurgical characteristics : microstructure and microhardness. International Journal of Advanced Manufacturing Technology. 67(Issue 5-8)1477-1489. 2012 [DOI]
[ACL11]P. Gilles, J. Senatore, S. Segonds, F. Monies and W. Rubio. Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC machines . International Journal of Production Research. 50(4)1045-1061. 2011 [DOI]
[ACL12]P. Gilles, G. Cohen, F. Monies and W. Rubio. Dynamic behaviour improvement for a torus milling cutter using balance of the transversal cutting force. International Journal of Advanced Manufacturing Technology. 40(7-8)669-675. 2009 [DOI]
[ACL13]J. Senatore, F. Monies, Y. Landon and W. Rubio. Optimising positioning of the axis of a milling cutter on an offset surface by geometric error minimisation . International Journal of Advanced Manufacturing Technology. 37(9-10)861-871. 2008 [DOI]
[ACL14]P. Gilles, F. Monies and W. Rubio. Optimum orientation of a torus milling cutter: Method to balance the transversal cutting force. International Journal of Machine Tools and Manufacture. 47(15)2263–2272. 2007
[ACL15]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Improved positioning for side milling of ruled surfaces : analysis of the rotation axis’s influence on machining error. International Journal of Machine Tools and Manufacture. 47(6)934-945. 2007
[ACL16]S. Segonds, Y. Landon, F. Monies and P. Lagarrigue. Method For Rapid Characterisation Of Cutting Forces In End Milling Considering Runout . International Journal of Machining and Machinability of Materials. 1(1)45-61. 2006
[ACL17]S. Segonds, G. Cohen, Y. Landon, F. Monies and P. Lagarrigue. Characterising The Behaviour Of Workpieces Under The Effect Of Tangential Cutting Force During Nc Turning. Application To Machining Of Slender Workpieces . Journal of Materials Processing Technology. 171(3)471-479. 2006 [DOI]
[ACL18]P. Gilles, F. Monies and W. Rubio. Modelling cutting forces in milling on torus cutters. International Journal of Machining and Machinability of Materials. 1(2)166-185. 2006 [DOI]
[ACL19]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Analysis of improved positioning of five-axis ruled surface milling using envelope surface. CAD Computer Aided Design. 37(10)989-998. 2005
[ACL20]F. Monies, M. Mousseigne, J.-M. Redonnet and W. Rubio. Determining a collision-free domain for the tool in five-axis machining. International Journal of Production Research. 42(21)4513-4530. 2004 [DOI]
[ACL21]F. Monies, J.-N. Felices, W. Rubio, J.-M. Redonnet and P. Lagarrigue. Five-axis NC milling of ruled surfaces: optimal geometry of a conical tool . International Journal of Production Research. 40(12)2901-2922. 2002
[ACL22]F. Monies, W. Rubio, J.-M. Redonnet and P. Lagarrigue. Comparative study of interference caused by standard and improved positioning of a conical milling cutter working on a ruled surface. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215, 1305-1317. 2001
[ACL23]F. Monies, J.-M. Redonnet, W. Rubio and P. Lagarrigue. Improved positioning of a conical mill for machining ruled surfaces : application to turbine blade. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 214, 625-634. 2000
[ACL24]J.-M. Redonnet, W. Rubio, F. Monies and G. Dessein. Optimising tool positioning for end-mill machining of free-form surfaces on 5-axis machines for both semi-finishing and finishing. International Journal of Advanced Manufacturing Technology. 16(6)383-391. 2000

Communication avec actes dans un congrès international ou national

[ACT1]N. Wojtowicz, I. Danis, F. Monies, P. Lamesle and R. Chieragatti. The influence of cutting conditions on surface integrity of a wrought magnesium alloy. Proceedings of The Manufacturing Engineering Society International Conference, MESIC 2013 p.20-28 2013 [DOI]
[ACT2]I. Danis, N. Wojtowicz, F. Monies, P. Lamesle and P. Lagarrigue. Cutting Conditions and Surface Integrity During Dry Plunge-milling of a Wrought Magnesium Alloy. Proceedings of The Manufacturing Engineering Society International Conference, MESIC 2013 p.36-44 2013 [DOI]
[ACT3]P. Gilles, G. Cohen, F. Monies and W. Rubio. Positionnement d'outil torique avec équilibrage de l'effort de coupe transversal . Proceedings of AIP Priméca, Mont Dore 2012
[ACT4]J. Senatore, F. Monies and W. Rubio. Analyse de la vrille des surfaces réglées, application à l'usinage par bande. Proceedings of AIP Priméca, Mont Dore 2012
[ACT5]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Determination of workpiece orientation on 3-axis NC Machine Tool from a study of iso-scallop path. Proceedings of International Conference on Integrated Design and Manufacturing in Mechanical Engineering 2004
[ACT6]F. Monies, Y. Landon, W. Rubio and J.-M. Redonnet. Detection and correction of local and global collisions for the end milling of sculptured surfaces. Proceedings of 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France, May 14–16, 2002 2002
[ACT7]Y. Landon, P. Lagarrigue, F. Monies and W. Rubio. Correction of circularity defects of a N.C. Machine Tool. Proceedings of 2nd International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN), Turin, Italy, May 27–31, 2001 2001

Communication sans actes dans un congrès international ou national

[COM1]S. Cafieri, F. Monies, M. Mongeau and C. Bes. Optimizing plunge milling aeronautical parts via MINLP. orsc - euro - 2015, Shanghai, May 10-12 2015

Chapitre d'ouvrage scientifique

[OSC1]J. Senatore, F. Monies and W. Rubio. 5-axis Flank milling of sculptured surfaces. In book Machining of complex sculptured surfaces, Chap. 2, p.33-67. Ed. Springer. 2012 ISBN:978-1-4471-2355-2



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80