Farhad Rézaï-Aria




Professeur à l'Ecole Nationale Supérieure des Mines d'Albi-Carmaux (Mines Albi)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi


☎ +33 (0) 5 63 49 30 82

Production scientifique

58 contributions

Article de revue internationale avec comité de lecture

[ACL1]R. Julien, V. Velay, V. Vidal, Y. Dahan, R. Forestier and F. Rézaï-aria. Tensile behaviour of high temperature forged Ti-6Al-4V during in-situ heat treatments. Materials Letters. In press, . 2017 [DOI]
[ACL2]A. Zouaghi, V. Velay, A. Soveja, T. Pottier, M. Cheikh and F. Rézaï-aria. A multi-scale approach to investigate the nonlinear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: experiment and numerical analysis. International Journal Of Plasticity. 87, 130-153. 2016 [DOI] [HAL]
[ACL3]M. Shah, C. Mabru, M. Baccar and F. Rézaï-aria. Normalization of fatigue crack growth data in AISI H11 tool steel at room and elevated temperature . International Journal of Damage Mechanics. 24(8)1111-1140. 2015 [DOI]
[ACL4]M. Shah, C. Mabru and F. Rezai-aria. Characterisation of the surface damage of X38CrMoV5 (AISI H11) tool steel at room temperature and 600 degrees C . Fatigue and Fracture of Engineering Materials and Structures. 38(6)742-754. 2015 [DOI]
[ACL5]F. Szmytka , M. Salem , F. Rezai-aria and A. Oudin . Thermal fatigue analysis of automotive Diesel piston : experimental procedure and numerical protocol. International Journal of Fatigue. 73, 48-57. 2015 [DOI]
[ACL6]E. Cabrol, C. Boher, V. Vidal and F. Rézaï-aria. Plastic straining of cobalt-based hardfacings under friction loading. Wear. 330-331, 354-363. 2015
[ACL7]K. Dohda, C. Boher, F. Rézaï-aria and P. Mahayotsanun. Tribology in metal forming at elevated temperatures. Friction. 3(1)1-27. 2015
[ACL8]F. Medjedoub, S. Le Roux, G. Dour and F. Rézaï-aria. Effect of local stress on the heat-checking morphology in high temperature tool steels under thermal fatigue: Transition from multi-axiality to uniaxiality. Mechanics of Materials. 69(1)159-172. 2014 [DOI]
[ACL9]P. Lepesant, C. Boher, Y. Berthier and F. Rézaï-aria. A phenomenological model of the third body particles circulation in a high temperature contact. Wear. 298, 66-79. 2013
[ACL10]S. Le Roux and F. Rézaï-aria. Topological and metric properties of microscopic crack patterns: application to thermal fatigue of high temperature tool steels. Journal of Physics D - Applied Physics. 46(29)295301. 2013 [DOI]
[ACL11]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Role of heat-flux density and mechanical loading on the microscopic heat-checking of high temperature tool steels under thermal fatigue experiments. International Journal of Fatigue. 51, 15-25. 2013 [DOI]
[ACL12]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Image analysis of microscopic crack patterns applied to thermal fatigue heat-checking of high temperature tool steels. Micron. 44, 347-358. 2013 [DOI]
[ACL13]M. Chaussumier, C. Mabru, M. Shahzad, R. Chieragatti and F. Rézaï-aria. A predictive fatigue life model for anodized 7050 aluminium alloy. International Journal of Fatigue. 48, 205-213. 2013 [DOI] [OATAO]
[ACL14]M. Shah, C. Mabru, F. Rézaï-aria, I. Souki and R.A. Pasha. An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verification : case of FCGR of AISI H11 tool steel. Acta Metallurgica Sinica (English Letters). 25(4)307-319. 2012
[ACL15]M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru and F. Rézaï-aria. Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy. Surface and Coatings Technology. 206(11-12)2733-2739. 2012 [DOI]
[ACL16]M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru and F. Rézaï-aria. Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy. Materials and Design. 32(6)3328-3335. 2011 [DOI] [OATAO]
[ACL17]M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru and F. Rézaï-aria. Influence of surface treatments on fatigue life of Al 7010 alloy. Journal of Materials Processing Technology. 210(13)1821-1826. 2010 [DOI] [OATAO]
[ACL18]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack Propagation in Tool Steel X38CrMoV5 (AISI H11) in SET Specimens. Advanced Engineering Materials. 11(9)695-754. 2009 [DOI]
[ACL19]C. Scandian, C. Boher, J. De Mello and F. Rézaï-aria. Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: The relationship between microstructure and wear. Wear. 267(1-4)401-408. 2009 [DOI]
[ACL20]C. Boher, O. Barrau, R. Gras and F. Rézaï-aria. A wear model based on cumulative cyclic plastic straining. Wear. 267(5-8)1087-1094. 2009 [DOI]
[ACL21]K. Mocellin, M. Ferrarro, V. Velay, R. Logé and F. Rézaï-aria. Numerical Life Prediction of Mechanical Fatigue for Hot Forging Tools. International Journal of Material Forming. 2, 129-132. 2009 [DOI] [HAL]
[ACL22]M. Shah, C. Boher, S. Le Roux, F. Rézaï-aria and C. Mabru. An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens. Revue de Métallurgie - Cahiers d'Informations Techniques. 106(3)140-145. 2009 [DOI] [OATAO]
[ACL23]J. Rishmany, C. Mabru, R. Chieragatti and F. Rézaï-aria. Simplified Modelling Of The Behaviour Of A 3d Periodic Structures Such As Aircraft Heat Exchanger. International Journal Of Mechanical Sciences. 50(6)1114-1122 . 2008 [DOI] [OATAO]
[ACL24]G. Dour, F. Medjedoub, S. Le Roux, G. Diaconu and F. Rézaï-aria. Normalized thermal stresses analysis to design a thermal fatigue experiment. Journal of Thermal Stresses. 28(1)1-16. 2005 [DOI]
[ACL25]A. Oudin, P. Lamesle, L. Penazzi, S. Le Roux and F. Rezai-Aria. Thermomechanical fatigue behaviour and life assessment of hot work tool steels. European Structural Integrity Society. 29, 195-201. 2002 [DOI]

Article de revue avec comité de lecture non répertorié

[ACLN1]D. Delagnes, F. Rézaï-aria and C. Levaillant. Influence of testing and tempering temperatures on fatigue behaviour, life and crack initiation mechanisms in a 5%Cr martensitic steel. Procedia Engineering. 2(1)427-439. 2010 [DOI]
[ACLN2]F. Rézaï-aria, C. Boher, G. Dour, P. Lamesle and S. Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud. Bulletin du cercle d'études des métaux. 17(18). 2007

Communication invitée dans un congrès national ou international

[INV1]F. Medjedoub, G. Dour, S. Le Roux, P. Lamesle, M. Salem and F. Rézaï-aria. Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). Proceedings of 7th International Tooling Conference Invited lecture p.461-469 2006
[INV2]F. Rézaï-aria, F. Medjedoub, G. Dour and S. Le Roux. Some aspects of thermal fatigue of metallic tools. Abrasion Conference 2005 Invited lecture 2005

Communication avec actes dans un congrès international ou national

[ACT1]E. Cabrol, C. Boher, V. Vidal, F. Rézaï-aria and F. Touratier. Wear mechanisms of hardfaced aeronautical high temperature forging tools. Proceedings of ASMET - TOOL STEEL 2016 2016
[ACT2]A. Zouaghi, V. Velay, A. Soveja, F. Rézaï-aria, T. Pottier and M. Cheikh. Multiscale Modelling of the Surface Behaviour of AISI H11 Tool Steels. Proceedings of 10th TOOL Conference 2016 - TOOL 2016 2016
[ACT3]A. Zouaghi, V. Velay, A. Soveja and F. Rézaï-aria. A NUMERICAL INVESTIGATION ON THE HETEROGENEOUS AND ANISOTROPIC MECHANICAL BEHAVIOUR OF AISI H11 STEEL USING VARIOUS STRESS-STRAIN FORMULATIONS: A MULTI-SCALE APPROACH. Proceedings of 11th World Congress on Computational Mechanics (WCCM XI) 2014
[ACT4]P. Le Baillif, P. Lamesle, D. Delagnes, V. Velay, C. Dumont and F. Rézaï-aria. Influence of the quenching rate and step-wise cooling temperatures on microstructural and tensile properties of PER72 R © Ni-based superalloy. Proceedings of SUPERALLOYS 2014 - 2nd European Symposium on Superalloys and their Applications 2014 [DOI]
[ACT5]K. Ben Slima, L. Penazzi, C. Mabru, F. Ronde-oustau and F. Rézaï-aria. A new method for advanced virtual design of stamping tools for automotive industry: application to nodular cast iron EN-GJS-600-3 . Proceedings of The 14th International Conference on Material Forming - Esaform 2011 p.1713-1720 2011 [DOI] [OATAO]
[ACT6]M. Chaussumier, M. Shahzad, C. Mabru, R. Chieragatti and F. Rézaï-aria. Modélisation de la multi-fissuration d’un alliage d’aluminium 7010 traité par oxydation anodique chromique. Proceedings of 29èmes Journées De Printemps De La Sf2m, ”influence Des Procédés Sur La Tenue En Fatigue, Rôle Des Défauts” p.147-154 2010 [OATAO]
[ACT7]M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru and F. Rézaï-aria. Influence of anodizing process on fatigue life of machined aluminium alloy . Proceedings of 10th International Fatigue Conference p.1015-1024 2010 [DOI] [OATAO]
[ACT8]M. Chaussumier, M. Shahzad, C. Mabru, R. Chieragatti and F. Rézaï-aria. A fatigue multi-site cracks model using coalescence, short and long crack growth laws, for anodized aluminum alloys. Proceedings of 10th International Fatigue Conference p.995-1004 2010 [DOI] [OATAO]
[ACT9]M. Shah, C. Mabru and F. Rézaï-aria. Investigation Of Crack Propagation In X38crmov5 (aisi H11) Tool Steel At Elevated Temperatures . Proceedings of 10th International Fatigue Conference p.2045-2054 2010 [DOI] [OATAO]
[ACT10]M. Salem, P. Lamesle, H. Laribou, S. Le Roux, G. Dour and F. Rézaï-aria. Oxidation and corrosion effects on non-isothermal fatigue of hot work tool steel X38CrMoV5 (AISI H11). Proceedings of 8th International Tooling Conference p.437-445 2009
[ACT11]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack propagation in X38CrMoV5 (AISI H11) tool steel. Proceedings of 8th International Tooling Conference p.83-94 2009 [OATAO]
[ACT12]M. Chaussumier, M. Shahzad, C. Mabru, R. Chieragatti and F. Rézaï-aria. Influence du décapage sur la tenue en fatigue de l'alliage al7010-t7451 traité par oxydation anodique chromique. Proceedings of Cfm 2009 19ème Congrès Français De Mécanique 2009 [OATAO]
[ACT13]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack Propagation In Tool Steel X38CrMoV5 (aisi H11) In Set Specimens. Proceedings of 27th Spring Meeting On Fatigue And Plasticity p.746-749 2008 [DOI] [OATAO]
[ACT14]J. Rishmany, L. Renault, C. Mabru, R. Chieragatti and F. Rézaï-aria. Static and dynamic behaviour of a 3d periodic structure. Proceedings of 16th European Conference Of Fracture : Ecf 16 Failure Analysis Of Nano And Engineering Materials And Structures 2006 [DOI] [OATAO]
[ACT15]M. Suraratchai, C. Mabru, R. Chieragatti and F. Rézaï-aria. Influence de gammes d'usinage sur la tenue en fatigue d'un alliage léger aéronautique. Proceedings of Cfm 2005 : 17ème Congrès Français De Mécanique 2005 [OATAO]
[ACT16]F. Rézaï-aria, F. Medjedoub, S. Le Roux, G. Dour, P. Hairy, H. Khang-Ny and M. Golin. An investigation on thermal fatigue surface cracking of 5CrMoV die tool steel. Proceedings of 22nd International Die Casting Congress & Exposition p.363-368 2003
[ACT17]B. Miquel, S. Jean, S. Le Roux, P. Lamesle and F. Rézaï-aria. Heat-checking of hot work tool steels. Proceedings of 9th SF2M Spring Meeting on Temperature Fatigue Interaction p.185-193 2002
[ACT18]R. Chieragatti, C. Mabru, C. Espinosa and F. Rézaï-aria. A new specimen for fatigue investigations . Proceedings of High Temperature Fatigue CAMP2002 ; Paderborn (D), p.207-213 2002
[ACT19]A. Oudin, P. Lamesle, L. Penazzi, S. Le Roux and F. Rézaï-aria. Thermomechanical fatigue behaviour and life assessment of hot work tool steels. Proceedings of 9th SF2M Spring Meeting on Temperature Fatigue Interaction p.195-201 2001
[ACT20]N. Roustit, D. Garcia, J.-J. Orteu and F. Rézaï-aria. Monitoring of in-plane cracking using correlation-based image processing: preliminary results . Proceedings of International Workshop on Video-Controlled Materials Testing and In-Situ Microstructural Characterization, Nancy (France), 16-18 November 1999 1999
[ACT21]G. Bernhart, P. Lours, F. Rézaï-aria and C. Levaillant. Effet de la thermique transitoire sur l’endommagement des outillages dans les procédés de formage . Proceedings of Actes des journées de la Société Française des Thermiciens (SFT) sur la thermique de la machine outil et de l’usinage, Bordeaux (France), 20 janvier, 1999 1999

Communication sans actes dans un congrès international ou national

[COM1]A. Zouaghi, A. Soveja, F. Rézaï-aria, T. Pottier, M. Cheikh and V. Velay. Multi-scale surface modeling of the nonlinear mechanical behaviour of AISI H11 hot work tool steel. International Conference on Plasticity, Damage, and Fracture 2016
[COM2]R. Julien, V. Velay, V. Vidal, M. Salem, Y. Dahan, R. Forestier and F. Rézaï-aria. Thermomechanical behaviour and microstructural evolution of high temperature forged Ti-6Al-4V during heat treatment quenching. 12th International Conference on the Mechanical Behavior of Materials, Karlsruhe - GERMANY 2015
[COM3]P. Lamesle, S. Le Roux and F. Rézaï-aria. Suivi in-situ par vision artificielle des déformations d’une pièce métallique pendant une trempe. Congrès national A3TS - Journées "Moules & Outils" 2007
[COM4]F. Rézaï-aria, C. Boher, G. Dour, P. Lamesle and S. Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud. Congrès national A3TS - Journées "Moules & Outils 2007

Communication par poster dans un congrès international ou national

[AFF1]A. Zouaghi, V. Velay, A. Soveja, R. Chieragatti and F. Rézaï-aria. Une étude multi-échelle du comportement en surface de l´acier X38CrMoV5 : approche numérique et expérimentale. 21ème CONGRÉS FRANÇAIS DE MÉCANIQUE [CFM2013] 2013
[AFF2]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Application of image analysis for thermal fatigue heat checking investigations. 8th International Tooling Conference 2009
[AFF3]M. Salem, P. Lamesle, H. Laribou, S. Le Roux, G. Dour and F. Rézaï-aria. Effet de l’environnement par fatigue thermique des aciers à outils pour travail à chaud X38CrMoV5 (AISI H11). Congrès national A3TS - Journées "Moules & Outils 2007

Brevet

[BR1]F. Szmytka, A. Oudin, F. Rézaï-aria and M. Salem. Banc de fatigue thermique par induction pour piston. Brevet No.FR11/51562, 2011



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80