Gilles Dusserre




Maître assistant à l'Ecole Nationale Supérieure des Mines d'Albi-Carmaux (Mines Albi)
Membre du groupe Matériaux et Structures Composites (MSC)
Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi


☎ +33 (0) 5 63 49 33 09

Production scientifique

33 contributions

2017

[ACL]F. Liang, M. Sauceau, G. Dusserre and P. Arlabosse. A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge. Water Research. 113, 171-180. 2017 [DOI]
[ACL]R. D'elia, G. Dusserre, S. Del Confetto, N. Eberling-fux, C. Descamps and T. Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system. Polymer Engineering and Science. , . 2017 [DOI]

2016

[ACL]G. Dusserre, O. Valentin, F. Nazaret and T. Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 °C. Journal of the European Ceramic Society. 36(10)2627–2639. 2016 [DOI]
[ACL]D. Mauduit, G. Dusserre and T. Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines. Materials and Design. 95, 414–421. 2016 [DOI]
[ACL]R. D'Elia, G. Dusserre, S. Del Confetto, N. Eberling-fux, C. Descamps and T. Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling. European Polymer Journal. 76, 40-52. 2016 [DOI]
[ACL]M.-Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. BEM computation of 3D Stokes flow including moving front. International Journal of Material Forming. , . 2016 [DOI]

2015

[ACL]G. Dusserre. Modelling the hysteretic wale-wise stretching behaviour of technical plain knits. European Journal of Mechanics, A/Solids. 51, 160-171. 2015 [DOI]
[OSC]G. Dusserre and G. Bernhart. Knitting processes for composites manufacture . In book advances in composites manufacturing and process design, Chap. 2, p.27-53. Ed. . 2015 ISBN:978-1-78242-307-2
[ACL]J. Vignes, F. Schmidt, G. Dusserre and J.-F. Dalmasso. Numerical simulation of extruded clay paste compression. International Journal of Material Forming. 8, 111-118. 2015 [DOI]

2014

[COM]M.Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation. International conference on COmputational methods in Manufacturing Processes 2014
[ACL]L. Robert and G. Dusserre. Assessment of thermoset cure-induced strains by fibre Bragg grating sensor. Polymer Engineering and Science. 54(7)1585–1594. 2014 [DOI]
[ACL]L. Robert and G. Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer. Polymer Engineering and Science. 54(3)626-635. 2014 [DOI]
[ACL]L. Balea, G. Dusserre and G. Bernhart. Mechanical behaviour of plain-knit reinforced injected composites: effect of inlay yarns and fibre type. Composites Part B: Engineering. 56, 20-29. 2014 [DOI]
[ACL]G. Dusserre, L. Balea and G. Bernhart. Effect of stretching the knitted reinforcement and inlay yarns on the composite elastic properties: a semi-analytical model. Composites - Part A: Applied Science and Manufacturing. 64, 185-193. 2014 [DOI]

2013

[ACL]G. Dusserre, F. Nazaret, L. Robert and T. Cutard. Applicability of image correlation techniques to characterize asymmetric refractory creep during bending tests. Journal of the European Ceramic Society. 33(2)221–231. 2013 [DOI]
[ACLN]J. Vignes, F. Schmidt, G. Dusserre and J.F. Dalmasso. Effect of moisture on the behaviour of an extruded clay paste. Key Engineering Materials. 554-557, 2230-2236. 2013 [DOI]
[ACL]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices, B. Cosson and F. Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes. Polymer Composites. 34(8)1235–1244. 2013 [DOI]

2012

[COM]L. Robert and G. Dusserre. Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors. European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre 2012
[AFF]B. Reine, J. Di-tomaso, G. Dusserre and P. Olivier. Study of Thermal Behaviour of Thermoset Polymer Matrix Filled with Micro and Nanoparticles. COMSOL Conference Milan 2012 2012
[ACT]B. Reine, J. Di-tomaso, G. Dusserre and P. Olivier. Study of Thermal Behaviour of Thermoset Polymer Matrix Filled with Micro and Nanoparticles. Proceedings of ECCM 15th - The 15th European Conference on Composites Materials, Venice (Italy), June 24-28 2012
[COM]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method . ACMA 2010 - International symposium on composites and aircraft materials 2012
[COM]G. Dusserre and T. Cutard. Comportement non-linéaire de bétons réfractaires renforcés de fibres.. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012. 2012
[AFF]A. Farrugia, G. Dusserre, T. Cutard and M. Rollin. Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system . ECCM 15 - 15th European Conference on Composite Materials, Venice (Italy) 2012
[ACT]O. Valentin, G. Dusserre, T. Cutard and F. Nazaret. Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model. Proceedings of EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany) 2012
[ACT]P. Beneditti, G. Dusserre, T. Cutard and J. Huez. Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications. Proceedings of FPCM 11 - 11th International Conference on Flow Processing in Composite Materials, Auckland (New Zealand) 2012
[ACLN]J. Vignes , F. Schmidt, G. Dusserre, O. De Almeida and J.-F. Dalmasso. Numerical simulations of clay tiles compression. Key Engineering Materials. 504-506 , 1403-1408. 2012 [DOI]

2011

[ACL]G. Dusserre, G. Bernhart, F. Schmidt and G. Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests. Journal of Non-Newtonian Fluid Mechanics. 166(21-22)1229-1238. 2011 [DOI]
[ACL]G. Dusserre, E. Jourdain and G. Bernhart. Effect of deformation on the in-plane permeability of knitted glass preform. Polymer Composites. 32(1)18-28. 2011 [DOI]
[ACL]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method. Applied Mechanics and Materials. 62, 57-65. 2011 [DOI]

2009

[ACL]R. Gantois, E. Jourdain and G. Dusserre. Recent patents on in-plane permeability measurement of LCM composite reinforcements. Recent Patents on Engineering. 3(2)109-116. 2009
[ACL]G. Dusserre, G. Dour and G. Bernhart. In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle. International Journal of Thermal Sciences. 48(21)428-439. 2009 [DOI]

2005

[ACT]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process. Proceedings of 8th International Conference on Advances in Materials and Processing Technologies 2005
[ACL]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process . Journal of Materials Processing Technology. 162-163, 484-491 . 2005 [DOI]



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80