Jean-Charles Maré




Professor at Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Member of the Modelling of Mechanical Systems and Microsystems Group (MS2M)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse


☎ +33 (0) 5 61 17 10 96 (recherche)
☎ +33 (0) 5 61 55 97 17 (enseignement)

Publications

81 contributions

2017

[ACT]B. Attar and J.-C. Maré. Assessment of Electric Drive for Fuel Pump using Hardware in the Loop Simulation. Proceedings of The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden 2017
[AFF]J. Fu, J.-C. Maré and Y. Fu. Virtual Prototyping of Position Synchronized Electro-mechanical Actuators Driving Independent Loads for More Electric Aircraft Flight Control Actuation System Application. 4th More Electric Aircraft (MEA) 2017, Bordeaux, France; 1-2 February 2017
[ACT]S. Delbecq, F. Tajan, M. Budinger, J.-C. Maré and F. Sanchez. A framework for the conceptual and preliminary design of embedded mechatronic systems. Proceedings of International Workshop on Aircraft System Technologies 2017

2016

[ACL]J. Fu, J.-C. Maré and Y. Fu. Modelling and simulation of flight control electromechanical actuators with special focus on model architecting, multidisciplinary effects and power flows . Chinese Journal of Aeronautics. , article in press. 2016 [DOI]
[ACL]J. Fu, J.-C. Maré and Y. Fu. Incremental Simulation-Based Design of Mechanical Power Transmission Architectures Applied to Aerospace Electromechanical Actuators. Journal of Mechanical Design - Transactions of the ASME. , . 2016
[ACT]J. Fu, J.-C. Maré and Y. Fu. Incremental Modeling and Simulation of Mechanical Power Transmission for More Electric Aircraft Flight Control Electromechanical Actuation System Application. Proceedings of ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, AZ, United States; 11–17 November p.V001T03A040 2016 [DOI]
[ACT]J. Fu, Y. Fu and J.-C. Maré. Special considerations to thermal behavior modeling and simulation of an aerospace electromechanical actuation system. Proceedings of 30th Congress of the International Council of the Aeronautical Sciences (ICAS), Daejeon, Korea; 25-30 September 2016
[ACT]C. Coïc, J. Fu and J.-C. Maré. Bond Graphs Aided development of Mechanical Power Transmission for Aerospace Electromechanical Actuators. Proceedings of International Conference on Bond Graph Modeling and Simulation (ICBGM), Montreal, QC, Canada; 24-27 July p.221-228 2016
[ACT]C. Coïc and J.-C. Maré. Modeling and PreSizing Process for Hydrostatic Thrust Bearing with Special Consideration to Performance Robustness Within a Wide Temperature Range. Proceedings of 23rd International Conference on Hydraulics and Pneumatics, 1-3 June, Prague (keynote opening) p.3-14 2016
[ACL]J.-C. Maré. Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload. Simulation Modelling Practice and Theory. (63)58-82. 2016 [DOI]
[OS]J.-C. Maré. Aerospace Actuators Volume 1, Needs, reliability and hydraulic power solutions. Ed. ISTE / WILEY 217p. 2016 ISBN:978-1-84821-941-0

2015

[ACT]J. Fu, I. Hazyuk and J.-C. Maré. Preliminary Design Rules for Electromechanical Actuation Systems –Effects of Saturation and Compliances. Proceedings of 5th European Air and Space Conference, Delft, Netherlands; 7-11 September p.1-14 2015
[ACL]I. Hazyuk, M. Budinger, F. Sanchez, J.-C. Maré and S. Colin. Scaling laws based metamodels for the selection of the cooling strategy of electromechanical actuators in the early design stages. Mechatronics. 29, 67-77. 2015 [DOI]
[ACT]J. Fu, J.-C. Maré, Y. Fu and X. Han. Incremental Modelling and Simulation of Power Drive Electronics and Motor for Flight Control Electromechanical Actuators Application. Proceedings of IEEE International Conference on Modelling and Automation, Beijing, China; 2-5 August p.1319-1325 2015 [DOI]
[AP]J.-C. Maré. Best practices virtual prototyping - application to electromechanical actuators. Salon International de l'Aéronautique et de l'Espace, Paris 15 Juin 2015
[ACT]E. Gnesi, J.-C. Maré and J.-L. Bordet. Modeling and simulation of thermal-hydraulic coupling in electro-hydrostatic modules involving fixed-displacement vane pumps. Proceedings of Fourteenth Scandinavian International Conference on Fluid Power, Tampere, Finland, May 20-22 2015
[ACL]F. Hospital, M. Budinger, A. Reysset and J.-C. Maré. Preliminary design of aerospace linear actuator housings. Aircraft Engineering and Aerospace Technology. 87(3)224-237. 2015 [DOI]
[COM]J.-C. Maré. Incremental modelling and simulation of EMAs with focus on mechanical power transmission. A-6 Symposium of Society of Automotive Engineers, May 10-14, Charleston, USA 2015
[COM]J.-C. Maré. Commandes de vol et environnement. Journées Electrotechnique du club EEA - 24-25 Mars, Toulouse 2015
[COM]J.-C. Maré. Best practices in modelling and simulation applied to aerospace electromechanical actuators. 2015 European Aerospace Engineering Conference, Toulouse, March 11-12 2015
[ACT]J.-C. Maré. Best practices in system-level virtual prototyping - application to mechanical transmission in electromechanical actuators. Proceedings of Aircraft Systems Technolology, Hamburg, Germany, 23-25 February 2015
[ACL]A. Reysset, M. Budinger and J.-C. Maré. Computer-aided definition of sizing procedures and optimization problems of mechatronic systems. Concurrent Engineering Research and Applications. 23(4)320-332 . 2015 [DOI]

2014

[COM]J.-C. Maré. Critical Issues and Lessons Learned in the Simulation of Flight Control Actuators . Society of American Engineers, Aircraft group, Aerospace Actuation, Control and Fluid Power Systems 2014
[ACT]J.-C. Maré, G. Vinson, T. Prado and M. Combacau. Modelling and simulating the pump of an aerospace electro-hydrostatic module for fault detection and identification purposes. Proceedings of Proceedings of the Bath/ASME Symposium on Fluid Power and Motion Control p.1-10 2014 [DOI]
[ACL]J.-C. Maré. Friction modelling and simulation at system level - Considerations to load and temperature effects. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 229(1)27-48. 2014 [DOI]
[OSC]R. Denis , J.-C. Maré, G. Dauphin-tanguy and A. Debiane. Approche virtuelle pour la conception et le développement de systèmes mécatroniques - Mise en œuvre. In book Techniques de l'Ingénieur, série Ingénierie des systèmes et robotique, S-7801, p.S-7801. Ed. Techniques de l'Ingénieur. 2014
[OSC]G. Dauphin-tanguy, J.-C. Maré, R. Denis and A. Debiane. Approche virtuelle pour la conception et le développement de systèmes mécatroniques - Méthodologie. In book Encyclopédie des techniques de l'ingénieur, série Ingénierie des systèmes et robotique, p.S-7800. Ed. Techniques de l'Ingénieur. 2014
[COM]J.-C. Maré. Efficient Model-based Design of Actuation Systems and Components. Society of American Engineers, Aircraft group, Aerospace Actuation, Control and Fluid Power Systems 2014
[ACT]M. Budinger, I. Hazyuk, F. Sanchez and J.-C. Maré. Scaling-law-based metamodels for the sizing of actuation systems . Proceedings of 6th International Conference on Recent Advances in Aerospace Actuation Systems and Components p.129-135 2014
[ACT]F. Van Der Linden, C. Schlegel, M. Christmann, G. Regula, C. Hill, P. Giangrande and J.-C. Maré. Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters. Proceedings of 10th International Modelica Conference, Lund Sweden p.1-10 2014 [DOI]
[ACT]A. Reysset, M. Budinger and J.-C. Maré. Mission profiles analysis: guidelines to aircraft actuators new technology specification. Proceedings of Proceedings of 29th congress of the International Council of the Aeronautical Sciences, St Petersbourg, 7-12 september 2014. 2014

2013

[ACL]L. Wang and J.-C. Maré. A Force Equalization Controller for Active/Active Redundant Actuation System Involving Servo-hydraulic and Electro-mechanical Technologies. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. , . 2013 [DOI]
[ACT]R. Denis, A. Debiane, G. Dauphin Tanguy and J.-C. Maré. Presage virtual testing platform application to thrust reverser actuation. Proceedings of 4th European Air and Space Conference CEAS 2013; Linkoping, Sweden 2013
[ACT]D. Arriola, A. Reysset, M. Budinger, F. Thielecke and J.-C. Maré. From Airframer Requirements to Detailed Technical Specification of Electromechanical Actuators Aided by Knowledge-Based Methods . Proceedings of SAE 2013 AeroTech Congress & Exhibition, Montréal, Quebec, Canada , September 24-26, 2013 2013 [DOI]
[ACT]E. Gnesi and J.-C. Maré. Modeling of EHA Module Equipped with Fixed-Displacement Vane Pump. Proceedings of Proceeding of the 13th Scandinavian International Conference on Fluid Power, June 3-5, Linkoping, Sweden, 2013
[ACT]T. Ros, M. Budinger, A. Reysset and J.-C. Maré. Modelica Preliminary Design Library for Electromechanical Actuators. Proceedings of AST 2013, 4th International Workshop on Aircraft System Technologies, TUHH, Hamburg, Germany, April 23-24, 2013 2013
[ACL]M. Budinger, A. Reysset, T. El Halabi, C. Vasiliu and J.-C. Maré. Optimal preliminary design of electromechanical actuators. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. , . 2013 [DOI]
[OV]M. Budinger, F. Hospital, J. Liscouet, B. Multon, A. Reysset and J.-C. Maré. Chaînes de transmission de puissance mécatroniques - Modèles d'estimation. Ed. Techniques de l’Ingénieur 2013

2012

[ACT]E. Faugere, J.-C. Maré, C. Changenet, F. Ville and D. Delloue . Coupling Mechanical and Thermal Lumped Parameters Model for the Preliminary Design of Power Transmsissions Driven by Thermal Issues. Proceedings of 28TH International Congress on Aerospace Sciences, Brisbane, Australia, 23-28 September 2012
[ACT]L. Wang, J.-C. Maré and Y. Fu. Investigation in the dynamic force equalization of dissimilar redundant actuation systems operating in active/active mode. Proceedings of 28th International Congress of the Aeronautical Sciences ICAS 2012, Brisbane, Australia, 23-28 September, p.session-6.8.1 2012
[ACL]J.-C. Maré. Friction modelling and simulation at system level: a practical view for the designer. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 226(6)728 - 741. 2012 [DOI]
[ACT]J.-C. Maré. 2-D Lumped parameters modelling of EMAs for advanced virtual prototyping of EMAs. Proceedings of Proceedings of Recent Advances in Aerospace Actuation Systems and Components, Toulouse, France, June 13-14, 2012
[INV]J.-C. Maré. Historical evolution and challenges in aerospace actuation. Actuators 2012, Bremen, 18-20 June 2012 Invited keynote lecture 2012
[ACL]M. Budinger, J. Liscouët, F. Hospital and J.-C. Maré. Estimation models for the preliminary design of electromechanical actuators. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 226(3)243-259. 2012 [DOI] [HAL]
[ACT]J.-C. Maré. Historical evolution and challenges in aerospace actuation. Proceedings of Proc of the 8th International Fluid Power Conference, Dresden, Germany, March 26-28 2012
[ACL]J. Liscouët, J.-C. Maré and M. Budinger. An integrated methodology for the preliminary design of highly reliable electromechanical actuators: Search for architecture solutions. Aerospace Science and Technology. 22(1)9-18. 2012 [DOI]
[ACT]A. Fraj, M. Budinger, T. El Halabi, J.-C. Maré and C. Negoita. Modelling approachs for the simulation-based preliminary design and optimization of electromecanical and hydraulic actuation systems. Proceedings of 8th AIAA Multidisciplinary Design Optimization Specialist Conference, 23-26 April 2012, Honolulu, Hawaii, USA. 2012
[INV]M. Budinger, T. El Halabi and J.-C. Maré. Optimal preliminary design of electromechanical actuation systems. « More electrical » aircraft technologies, Symposium SPEC, November 8 & 9, 2011, Lyon. Invited lecture 2012

2011

[ACT]L. Wang, J.-C. Maré, Y. Fu and H. Qi. Force Equalization for Redundant Active/Active Position Control System Involving Dissimilar Technology Actuators. Proceedings of 8th JFPS International Symposium on Fluid Power, Okinawa, Japan, 25-26 October p.136-143 2011
[ACT]J.-C. Maré. Combining hydraulics and electrics for innovation and performance improvement in aerospace actuation. Proceedings of Proceedings of the Twelfth Scandinavian International Conference on Fluid Power, Tampere, Finlan, May 18-20 2011
[INV]J.-C. Maré. From CAD to Automated Design Process for the Preliminary Design of Actuators. SAE A-6 2011 Spring Meeting Symposium, Hamburg, Germany, May 9 -12 Invited keynote lecture 2011
[ACL]J. Liscouët, M. Budinger, J.-C. Maré and S. Orieux. Modelling approach for the simulation-based preliminary design of power transmissions. Mechanism and Machine Theory. 46(3)276-289. 2011 [DOI] [HAL]
[ACT]J. Liscouet, M. Budinger and J.-C. Maré. Scaling laws for the simulation based preliminary design of electro-mechanical actuators. Proceedings of AST 2011, Hamburg, Germany, march 31-april 1, 2011. 2011

2010

[ACT]J.-C. Maré and P.-E. Berthe. Design, virtual prototyping and test of a regenerative shock absorber for race cars. Proceedings of Bath/ASME Symposium on Fluid Power and Motion Control, Bath, England, 15-17 September p.447-460 2010
[ACT]T. Marger, V. Budinger, J.-C. Maré and F. Malburet. Designing redundant metering valves for hydraulic actuators under mixability and low-cost constraints. Proceedings of Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, American Institute of Aeronautics and Astronautics, Fortworth, USA, 13-15 September 2010
[INV]T. El Halabi, M. Budinger and J.-C. Maré. Optimal geometrical integration of electromechanical actuators , . OPTIMUS User Meeting 2010, Antwerp, 22 and 23 November 2010. Invited lecture 2010
[ACT]J.-C. Maré. Towards more electric drives for embedded applications: (re)discovering the advantages of hydraulics. Proceedings of Proceedings of the 7th International Fluid Power Conference, Aachen, Germany, March 22-24 2010
[ACL]W. Karam and Jean-C Maré. Advanced Model Development and Validation of Landing Gear Shock Struts. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 224(G5)575-586. 2010 [DOI]
[ACT]A. Fraj, M. Budinger, T. El Halabi and J.-C. Maré. Coupling CAD and system simulation framework for the preliminary design of electromechanical actuators. Proceedings of Proceedings of IDMME - Virtual Concept 2010, Bordeaux, France, October 20 – 22 2010
[ACT]F. Hospital, M. Budinger, J. Liscouet and J.-C. Maré. Model Based Methodologies for the Assessment of More Electric Flight Control Actuators . Proceedings of Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, American Institute of Aeronautics and Astronautics, Fortworth, USA, 13-15 September 2010
[ACT]J. Liscouet, M. Budinger and J.-C. Maré. Design for reliability of electromechanical actuators. Proceedings of Proceedings of the 4th international conference on Recent Advances in Aerospace Actuation Systems and Components, June 24-26 2010
[ACT]T. El Halabi, M. Budinger and J.-C. Maré. Optimal geometrical integration of electromechanical actuators. Proceedings of Proceedings of the 4th internation conference on Recent Advances in Aerospace Actuation Systems and Components, June 24-26 2010

2009

[ACL]S. Liscouet Hanke, J.-C. Maré and S. Pufe. Simulation Framework for Aircraft Power System Architecting. Journal of Aircraft. 46(4)1375-1380. 2009 [DOI]
[ACL]W. Karam and J.-C. Maré. Modelling and simulation of mechanical transmission in roller-screw electromechanical actuators. Aircraft Engineering and Aerospace Technology. 81(4)288-298. 2009 [DOI]
[ACT]M. Budinger, J. Liscouet, Y. Cong and J.-C. Maré. Model based Design of Electromechanical Actuators with Modelica. Proceedings of IDETC 09, San Diego, 30 aout, 2 septembre 2009. 2009
[ACT]J.-C. Maré and M. Budinger. Comparative analysis of energy losses in servo-hydraulic, electro-hydrostatic and electro-mechanical actuators . Proceedings of The 11th Scandinavian International Conference on Fluid Power, SICFP’09, Linköping, Sweden, June 2-4 2009

2008

[ACT]M. Budinger, J. Liscouet, S. Orieux and J.-C. Maré. Automated preliminary sizing of electromechanical actuator architectures. Proceedings of ELECTRIMACS 2008, Québec 2008
[ACT]J. Liscouet, S. Orieux, M. Budinger and J.-C. Maré. Electromechanical nose gear steering actuator – study of high reliability architectures . Proceedings of Conference SAE A- Landing Gear Systems – The21st century, Toulouse, 8-10 april 2008. 2008
[ACL]S. Liscouet Hanke, S. Pufe and J.-C. Maré. A simulation framework for aircraft power management. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 222(6)749-756. 2008 [DOI]
[ACL]J.-C. Maré and B. Attar. Enhanced model of four ways servovalves characteristics and its validation at low temperature. International Journal of Fluid Power. 9(2)35-43. 2008

2006

[ACL]J.-C. Maré. Dynamic loading systems for ground testing of high speed aerospace actuators. International Journal of Aircraft Engineering and Aerospace Technology. 78(4)275–282. 2006 [DOI]

2002

[OV]J.-C. Maré. Actionneurs hydrauliques Commande. Ed. Article S7531, série Mesure et Régulation, Encyclopédie des Techniques de l'Ingénieur 17p. 2002
[OV]J.-C. Maré. Actionneurs hydrauliques – Conception. Ed. Article S7530, série Mesure et Régulation, Encyclopédie des Techniques de l'Ingénieur 18p. 2002

2000

[ACL]J.-C. Maré, O. Geider and S. Colin. An improved dynamic model of pneumatic actuators. International Journal of Fluid Power. 1(2)39-47. 2000 [DOI]

1998

[BR]G. Thomin, G. Laffeta, M. Anduze, R. Caen, S. Colin and J.-C. Maré. Pump with positive displacement. Patent No.WO9931388, 1998
[BR]S. Orieux, L. Baldas and J.-C. Maré. Procédé et dispositif intégré de détection de la présence d'une pièce à déplacer sous une ventouse de manipulation par le vide. Patent No.FR2755119, 1998

1997

[BR]G. Thomin, G. Laffeta, M. Anduze, R. Caen, S. Colin and J.-C. Maré. Pompe à déplacement positif. Patent No.FR2772436, 1997
[ACL]S. Orieux, L. Baldas and J.-C. Maré. Système intégré d'obturation automatique de préhenseurs à attraction pneumatique. Comptes Rendus de l'Académie des Sciences, Série IIb. , 495-501. 1997 [DOI]

1996

[ACL]J.-C. Maré. Self tuning generalised predictive control of an electrohydraulic actuator. International Journal of Robotics and Automation. 11(1)41-47. 1996

1991

[ACL]C. Herrara, B. Gorla and J.-C. Maré. Vers la commande adaptative d'un actionneur électrohydraulique de position,. Journal of Automation and CIM - Revue d'Automatique et de Productique Appliquées. 4(2)123-140. 1991

16

[OS]J.-C. Maré. Les actionneurs aéronautiques. Besoins, fiabilité et solutions à puissance hydraulique. Ed. ISTE 229p. 16 ISBN:978-1-78405-136-5



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Delivery : +33 (0)5 61 17 10 07
Secretary ICA: +33 (0)5 61 17 10 85 or +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80