Jean-Max Redonnet




Maître de conférences - Université Paul Sabatier (UPS)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse




Production scientifique

25 contributions

Article de revue internationale avec comité de lecture

[ACL1]S. Segonds, P. Seitier, C. Bordreuil, F. Bugarin, W. Rubio and J.-M. Redonnet. An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter. Journal of Intelligent Manufacturing. online, 1-13. 2017 [DOI]
[ACL2]J.-M. Redonnet, A. Gamboa Vazquez, A. Traslosheros Michel and S. Segonds. Optimization of free-form surface machining using parallel planes strategy and torus milling cutter. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. , . 2016 [DOI]
[ACL3]S. Djebali, A. Perles, S. Lemouzy, S. Segonds, W. Rubio and J.-M. Redonnet. Milling plan optimization with an emergent problem solving approach. Computers and Industrial Engineering. 87, 506-517. 2015 [DOI]
[ACL4]S. Djebali, S. Segonds, J.-M. Redonnet and W. Rubio. Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling. International Journal of Production Research. 55(17)5296-5309. 2015 [DOI]
[ACL5]J.-M. Redonnet, S. Djebali, S. Segonds, J. Senatore and W. Rubio. Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter. CAD Computer Aided Design. 45(6)951–962. 2013 [DOI]
[ACL6]M. Mousseigne, Y. Landon, S. Seguy, G. Dessein and J.-M. Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. International Journal of Machine Tools and Manufacture. 65, 47-57. 2013 [DOI]
[ACL7]S. Segonds, C. Bes, F. Monies and J.-M. Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel. International Journal of Manufacturing Research. 8(3)277 - 295. 2013 [DOI]
[ACL8]X. Pessoles, J.-M. Redonnet, S. Segonds and M. Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths . International Journal of Advanced Manufacturing Technology. 58(5-8)631–642. 2012 [DOI]
[ACL9]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Improved positioning for side milling of ruled surfaces : analysis of the rotation axis’s influence on machining error. International Journal of Machine Tools and Manufacture. 47(6)934-945. 2007
[ACL10]P. Gilles, J.-M. Redonnet, P. Lagarrigue, R. Beceril, B. Fraysse and V. Boucharessas. Improving NC milling skills through practise of simulated work. Materials Science Forum. 526, 121-126. 2006
[ACL11]S. Segonds, J.-M. Redonnet, Y. Landon, C. Bes and P. Lagarrigue. Characterisation Of The Workpiece Dilatation Phenomenon During Milling Using The Neural Network Method. Application To The Nc Turning . International Journal of Advanced Manufacturing Technology. 27(1-2)83-89. 2005 [DOI]
[ACL12]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Analysis of improved positioning of five-axis ruled surface milling using envelope surface. CAD Computer Aided Design. 37(10)989-998. 2005
[ACL13]F. Monies, M. Mousseigne, J.-M. Redonnet and W. Rubio. Determining a collision-free domain for the tool in five-axis machining. International Journal of Production Research. 42(21)4513-4530. 2004 [DOI]
[ACL14]F. Monies, J.-N. Felices, W. Rubio, J.-M. Redonnet and P. Lagarrigue. Five-axis NC milling of ruled surfaces: optimal geometry of a conical tool . International Journal of Production Research. 40(12)2901-2922. 2002
[ACL15]S. Segonds, P. Lagarrigue, J.-M. Redonnet and W. Rubio. Compensation For Machining Defects Due To Spindle Dilatation . International Journal of Machine Tools and Manufacture. , . 2001
[ACL16]F. Monies, W. Rubio, J.-M. Redonnet and P. Lagarrigue. Comparative study of interference caused by standard and improved positioning of a conical milling cutter working on a ruled surface. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215, 1305-1317. 2001
[ACL17]F. Monies, J.-M. Redonnet, W. Rubio and P. Lagarrigue. Improved positioning of a conical mill for machining ruled surfaces : application to turbine blade. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 214, 625-634. 2000
[ACL18]J.-M. Redonnet, W. Rubio, F. Monies and G. Dessein. Optimising tool positioning for end-mill machining of free-form surfaces on 5-axis machines for both semi-finishing and finishing. International Journal of Advanced Manufacturing Technology. 16(6)383-391. 2000
[ACL19]J.-M. Redonnet, W. Rubio and G. Dessein. Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference. International Journal of Advanced Manufacturing Technology. 14(7)459-465. 1998 [DOI]

Communication avec actes dans un congrès international ou national

[ACT1]S. Arki, S. Marguet, J.-M. Redonnet, J.-F. Ferrero, P. Navarro and A. Aury. Semi-continous approach for the modelling of complex shaped thick composite parts. Proceedings of 2nd International conference on mechanics of composites p.176 2016 [DOI]
[ACT2]S. Djebali, S. Segonds, J.-M. Redonnet and W. Rubio. Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling. Proceedings of World Congress on Engineering 2013
[ACT3]X. Pessoles, Y. Landon, W. Rubio and J.-M. Redonnet. Dynamic model of CNC milling machines. Proceedings of 3rd International Conference on Structural Analysis of Advanced Materials (ICSAAM), Tarbes, France, September 7-10, 2009 2009
[ACT4]J. Senatore, F. Monies, J.-M. Redonnet and W. Rubio. Determination of workpiece orientation on 3-axis NC Machine Tool from a study of iso-scallop path. Proceedings of International Conference on Integrated Design and Manufacturing in Mechanical Engineering 2004
[ACT5]Y. Landon, G. Cohen, J.-M. Redonnet and P. Lagarrigue. Elaboration of a master-piece for the characterisation of the Tool Positioning Defect in milling. Proceedings of 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France, May 14–16, 2002 2002
[ACT6]F. Monies, Y. Landon, W. Rubio and J.-M. Redonnet. Detection and correction of local and global collisions for the end milling of sculptured surfaces. Proceedings of 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2002), Clermont-Ferrand, France, May 14–16, 2002 2002



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80