Michel Mousseigne




Maître de conférences - Université Paul Sabatier (UPS)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse


☎ +33 (0) 5 61 55 68 70

Production scientifique

25 contributions

Article de revue internationale avec comité de lecture

[ACL1]O. Shtehin, S. Seguy, V. Wagner, Y. Landon, G. Dessein and M. Mousseigne. Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: experimental study. Machining Science and Technology. , Accepté. 2018
[ACL2]M. Harzallah, T. Pottier, R. Gilblas, Y. Landon, M. Mousseigne and J. Senatore. A coupled in-situ measurement of temperature and kinematic fields in Ti-6Al-4V serrated chip formation at micro-scale. International Journal of Machine Tools and Manufacture. , . 2018
[ACL3]M. Harzallah, T. Pottier, J. Senatore, M. Mousseigne, G. Germain and Y. Landon. Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting. International Journal Of Mechanical Sciences. 134(C)189-202. 2017 [DOI]
[ACL4]V. Wagner, F. Barelli, G. Dessein, R. Laheurte, P. Darnis, O. Cahuc and M. Mousseigne. Comparison of the chip formations during turning of Ti64 β and Ti64 α+β . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. , 1-11. 2017 [DOI]
[ACL5]O. Shtehin, V. Wagner, S. Seguy, Y. Landon, G. Dessein and M. Mousseigne. Stability of ball end milling on warped surface: semi-analytical and experimental analysis. International Journal of Advanced Manufacturing Technology. 89(9-12)2557-2569. 2017 [DOI]
[ACL6]K. Moussaoui, S. Segonds, W. Rubio and M. Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. , . 2016 [DOI]
[ACL7]F. Barelli, V. Wagner, R. Laheurte, G. Dessein, P. Darnis, O. Cahuc and M. Mousseigne. Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. , 1-12. 2016 [DOI]
[ACL8]K. Moussaoui, F. Monies, M. Mousseigne, P. Gilles and W. Rubio. Balancing of the transverse cutting force during inclined milling and effect on the tool wear : applied to a Ti6Al4V. International Journal of Advanced Manufacturing Technology. 82(9-12)1859-1880. 2016 [DOI]
[ACL9]K. Moussaoui, M. Mousseigne, J. Senatore, R. Chieragatti and P. Lamesle. Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy. Metals. 5(3)1148-1162. 2015 [DOI]
[ACL10]K. Moussaoui, M. Mousseigne, J. Senatore and R. Chieragatti. The effect of roughness and residual stresses on fatigue life time of an alloy of titanium. International Journal of Advanced Manufacturing Technology. , . 2014 [DOI]
[ACL11]M. Mousseigne, Y. Landon, S. Seguy, G. Dessein and J.-M. Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. International Journal of Machine Tools and Manufacture. 65, 47-57. 2013 [DOI]
[ACL12]K. Moussaoui, M. Mousseigne, J. Senatore, P. Lagarrigue and Y. Caumel. Influence of milling on surface integrity of Ti-6Al-4V. Advanced Materials Research. 698, 127-137. 2013 [DOI]
[ACL13]X. Pessoles, J.-M. Redonnet, S. Segonds and M. Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths . International Journal of Advanced Manufacturing Technology. 58(5-8)631–642. 2012 [DOI]
[ACL14]K. Moussaoui, M. Mousseigne, J. Senatore, R. Chieragatti and F. Monies. Influence of milling on surface integrity of Ti6Al4V - Study of the metallurgical characteristics : microstructure and microhardness. International Journal of Advanced Manufacturing Technology. 67(Issue 5-8)1477-1489. 2012 [DOI]
[ACL15]G. Cohen, P. Gilles, S. Segonds, M. Mousseigne and P. Lagarrigue. Thermal and mechanical modeling during dry turning operations . International Journal of Advanced Manufacturing Technology. 58(1-4)133-140. 2011 [DOI]
[ACL16]X. Pessoles, Y. Landon, M. Mousseigne and W. Rubio. Simulation of the behaviour of CNC machine-tools in three-axis milling of sculptured surfaces. International Journal of Machining and Machinability of Materials. 8(3-4)326-338. 2010 [DOI]
[ACL17]G. Cohen, S. Segonds, M. Mousseigne and P. Lagarrigue. Tool Flank Wear Influence On Workpiece Heating In Dry Machining . International Journal of Machining and Machinability of Materials. , . 2008 [DOI]
[ACL18]S. Segonds, Y. Landon, M. Mousseigne and P. Lagarrigue. The Characterisation Of Dimensional Change Of Z Axis In Nc Turning . International Journal of Advanced Manufacturing Technology. 23(11-12)800-805. 2004 [DOI]
[ACL19]F. Monies, M. Mousseigne, J.-M. Redonnet and W. Rubio. Determining a collision-free domain for the tool in five-axis machining. International Journal of Production Research. 42(21)4513-4530. 2004 [DOI]
[ACL20]Y. Landon, S. Segonds, M. Mousseigne and P. Lagarrigue. Correction Of Milling Tool Paths By Tool Positioning Defect (TPD) Compensation . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217(8)1063-1073. 2003
[ACL21]V. Hass, M. Mousseigne and J.-L. Franceschi. 3D characterization of space charge in a slim insulator by a thermal modulation method. Journal of Electrostatics. , 307-312. 1997 [DOI]

Article de revue avec comité de lecture non répertorié

[ACLN1]H. Severac, J.-L. Franceschi and M. Mousseigne. Étude de la réponse photoacoustique d'objets massifs en 3D. Journal De Physique, III. 6(11)1451-1465. 1996 [DOI]

Communication avec actes dans un congrès international ou national

[ACT1]M. Harzallah, T. Pottier, J. Senatore, M. Mousseigne, G. Germain and Y. Landon. A New Behavior Model for Better Understanding of Titanium alloys Ti-6Al-4V Chip Formation in Orthogonal Cutting. Proceedings of ESAFORM 2016 2016
[ACT2]F. Barelli, G. Dessein, P. Darnis, R. Laheurte, O. Cahuc, M. Mousseigne and W. Rubio. Machinability of Titanium Alloys (TA6V αβ, β) and workpiece deformation.. Proceedings of The 5th International Conference on Structural Analysis of Advanced Materials ICSAAM 2013

Chapitre d'ouvrage scientifique

[OSC1]L. Berquez, M. Mousseigne, V. Haas and J.-L. Franceschi. Contrôle non destructif thermoacoustique. In book Instrumentation, interdisciplinarité et innovation : colloque interdisciplinaire en instrumentation C2I'98, p.. Ed. Lavoisier-Hermes. 1998 ISBN:9782866017309



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80