Robert Piquet




Maître de conférences (HDR) - Institut Universitaire de Technologie en Génie Mécanique et Productique de Toulouse (IUT GMP)
Membre du groupe Matériaux et Structures Composites (MSC)
Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse




Production scientifique

36 contributions

Article de revue internationale avec comité de lecture

[ACL1]P. Rahme, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Drilling of thick composite materials using a step gundrill. Composites - Part A: Applied Science and Manufacturing. 103, 304-313. 2017 [DOI]
[ACL2]P. Rahme, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Drilling analytical model of composite material with pilot hole. Mechanics and Industry. 17(5). 2016 [DOI]
[ACL3]F. Lachaud, C. Espinosa, L. Michel, P. Rahme and R. Piquet. Modelling strategies for predicting the residual strength of impacted composite aircraft fuselages. Applied Composite Materials. 22(6)599-621. 2015 [DOI]
[ACL4]F. Lachaud, C. Espinosa, L. Michel, R. Piquet and P. Rahme. Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates. Applied Composite Materials. 22(4)377-403. 2015 [DOI]
[ACL5]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates. Journal of Composite Materials. 49(10)1223-1240. 2015 [DOI]
[ACL6]P. Rahme, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Delamination-free drilling of thick composite materials. Composites - Part A: Applied Science and Manufacturing. 72, 148-159. 2015
[ACL7]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Drilling of thick composite material with a small diameter twist drill. International Journal of Advanced Manufacturing Technology. 76, 1543–1553. 2014 [DOI]
[ACL8]P. Rahmé, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Analytical models of composite material drilling. International Journal of Advanced Manufacturing Technology. 52(5)609-617. 2011 [DOI]
[ACL9]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Drilling thick composite materials using large diameter drills. International Journal of Machining and Machinability of Materials. 10(3)202-221. 2011
[ACL10]P. Lavernhe, E. Estivalèzes, F. Lachaud, C. Lodter and R. Piquet. Orthodontic bonding: Finite element for standardized evaluations. International Journal of Adhesion and Adhesives. 30(1)21–29. 2010 [DOI]
[ACL11]Y. Ledru, G. Bernhart, F. Schmidt, R. Piquet and L. Michel. Coupled visco-mechanical and diffusion void growth modelling during composite curing. Composites Science and Technology. 70, 2139-2145. 2010 [DOI] [OATAO]
[ACL12]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud, R. Piquet, B. Marguet, J. Bouriquet and C. Leroy. Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill. SAE International Journal of Aerospace. 1, 776-781. 2009
[ACL13]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Study into causes of damage to carbon epoxy composite material during the drilling process. International Journal of Machining and Machinability of Materials. 3(3-4)309-325. 2008 [DOI]
[ACL14]R. Zitoune, F. Collombet, R. Piquet, F. Lachaud and P. Pasquet. Experiment–calculation comparison of the cutting conditions representative of the long fiber composite drilling phase. Composites Science and Technology. 65(3/4). 2005 [DOI]
[ACL15]F. Lachaud, R. Piquet, F. Collombet and L. Surcin. Drilling of composites structures. Composite Structures. 52(3-4)551-566. 2001
[ACL16]R. Piquet, B. Ferret, F. Lachaud and P. Swider. Experimental analysis of drilling damage in thin carbon/epoxy plates using special drills. . Composites - Part A: Applied Science and Manufacturing. 31, 1107-1115. 2000

Article de revue avec comité de lecture non répertorié

[ACLN1]F. Lachaud, R. Piquet, G. Aldebert , J. Huet and L. Michel. Analyse du comportement mécanique des assemblages boulonnés composites à renforts tissés. Revue des Composites et des Materiaux Avances. 24(4)449-464. 2014
[ACLN2]R. Piquet, F. Lachaud, S. Catche and B. Castanié. Tolérance aux dommages de perçages dans les assemblages boulonnés composites. Revue des Composites et des Materiaux Avances. 24(4)481-493. 2014

Communication avec actes dans un congrès international ou national

[ACT1]M. Al Rafii, F. Lachaud and R. Piquet. Tolérances aux dommages d'impacts sur des assemblages boulonnées composites stratifiés en carbone/époxy . Proceedings of Journées Annuelles SF2M - 25-27 Octobre - Albi 2016
[ACT2]P. Rahmé, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Analytical model for drilling thick composite structures with pilot hole using a twist drill. Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014 2014
[ACT3]P. Rahmé, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Drilling of thick composite structures with pilot hole using a twist drill. Proceedings of 16th European Conference on Composite Materials (ECCM16), Seville, Spain, June 22-26, 2014 2014
[ACT4]S. Garcia, L. Michel, C. Espinosa, F. Lachaud and R. Piquet. Experimental Study of Corner Shaped Composite Laminates Subjected to Pure Bending. Proceedings of Proceedings of the 9th International Conference on Composite Science and Technology (ICCST-9) 2013
[ACT5]T. Poumadere, F. Lachaud, G. Bernhart, R. Piquet and F. Berthet. Influence of manufacturing process over mechanical properties of discontinuous carbon/epoxy composites realized by injection-tranfer. Proceedings of ECCM15 (European Conference On Composite Materials 15), Venecia, Italy 2012
[ACT6]T. Poumadere, F. Lachaud, G. Bernhart, R. Piquet and F. Berthet. Etude du comportement d'un matériau composite réalisé par injection-transfert de fibres mi-longues discontinues de carbone et de résine époxyde = Investigation of the behaviour of a discontinuous medium length carbon fibres and epoxy resin composite material manufactured by injection-transfer m. Proceedings of JNC17-17émes journées nationales des composites p.9 pages 2011 [HAL]
[ACT7]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Relation between surface roughness indicators and static strengh of drilled laminates. Proceedings of 15th International Conference on Composite Structures, ICCS 16, Porto, June 28-30 2011
[ACT8]Y. Ledru, L. Michel, R. Piquet, F. Schmidt and G. Bernhart. Quantification 2-D et 3-D de la porosité par analyse d’images dans les matériaux composites stratifiés aéronautiques 2-D and 3-D - void quantification with image analyse s in aeronautic composite laminates . Proceedings of JNC 16 2009
[ACT9]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Analytical and numerical models for drilling of composite materials using twist drill. Proceedings of 7th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2008) – Virtual Concept 2008, Beijing, China, October 8-10, 2008 2008
[ACT10]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill. Proceedings of Aerospace Manufacturing and Automated Fastening (AMAF) SAE International Conference, Detroit, MI, USA, April 14–17, 2008 2008
[ACT11]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Modeling of voids growth mechanisms during manufacturing composites laminates”, . Proceedings of FPCM-9, 9th International Conference on Flow Processes in Composite Material 2008
[ACT12]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Drilling of thick composite structures – State of the art. Proceedings of Aerospace Manufacturing and Automated Fastening (AMAF) SAE International Conference, Toulouse, France, September 12–14, 2006 2006
[ACT13]G. Gohorianu, F. Lachaud, R. Piquet and J.J. Barrau. Composite joints behaviour : effects of hole machinnig defects. Proceedings of Joining Plastic 2006 2006

Communication sans actes dans un congrès international ou national

[COM1]F. Lachaud, R. Piquet, E. Paroissien and J. Huet. Approche couplée essais-calculs pour l’analyse du comportement des assemblages boulonnés en composites stratifiés. NAFEMS 2013
[COM2]C. Espinosa, L. Michel, K. Bodjona, F. Lachaud and R. Piquet. Modélisation numérique de l’initiation et de la propagation des dommages lors du dépliage de cornières composites aéronautiques - Comparaison à des prévisions théoriques. NAFEMS 2012 2012
[COM3]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates”. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM4]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates. First Japanese-French Joint Workhop (EMAC-Tohoku University-INSA) 2008

Thèse de Doctorat ou HdR

[TH1]R. Piquet. Structures composites à matrice organique : procédés d'élaboration et d'usinage. Habilitation à diriger des recherches, Université Paul Sabatier. 2013



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80