Sabine Le Roux




Technicien à l'Ecole Nationale Supérieure des Mines d'Albi-Carmaux (Mines Albi)
Membre de l'Equipe de Soutien Scientifique et Technique
0M03, Mines d'Albi-Carmaux, Campus Jarlard
81013 Albi


☎ +33 (0) 5 63 49 30 57

Production scientifique

42 contributions

Article de revue internationale avec comité de lecture

[ACL1]A. Hajjaji, R. Zitoune, L. Crouzeix, S. Le Roux and F. Collombet. Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior. Wear. accepted, . 2017
[ACL2]A. Hejjaji, R. Zitoune, L. Crouzeix, S. Le Roux and F. Collombet. Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior. Wear. 376-377, 1356-1364. 2017 [DOI]
[ACL3]R. Zitoune, K. Vijayan, F. Collombet and S. Le Roux. Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks. Composite Structures. 146(20)148-158. 2016 [DOI]
[ACL4]Y. Liu, V. Vidal, S. Le Roux, F. Blas, F. Ansart and P. Lours. Influence of isothermal and cyclic oxidation on the apparent interfacial toughness in thermal barrier coating systems. Journal of the European Ceramic Society. 35(15)4269-4275. 2015 [DOI]
[ACL5]S. Le Roux, F. Deschaux-Beaume, T. Cutard and P. Lours. Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials. Journal of the European Ceramic Society. 35(3)1063-1079. 2015 [DOI]
[ACL6]F. Medjedoub, S. Le Roux, G. Dour and F. Rézaï-aria. Effect of local stress on the heat-checking morphology in high temperature tool steels under thermal fatigue: Transition from multi-axiality to uniaxiality. Mechanics of Materials. 69(1)159-172. 2014 [DOI]
[ACL7]S. Le Roux and F. Rézaï-aria. Topological and metric properties of microscopic crack patterns: application to thermal fatigue of high temperature tool steels. Journal of Physics D - Applied Physics. 46(29)295301. 2013 [DOI]
[ACL8]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Role of heat-flux density and mechanical loading on the microscopic heat-checking of high temperature tool steels under thermal fatigue experiments. International Journal of Fatigue. 51, 15-25. 2013 [DOI]
[ACL9]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Image analysis of microscopic crack patterns applied to thermal fatigue heat-checking of high temperature tool steels. Micron. 44, 347-358. 2013 [DOI]
[ACL10]S. Le Roux, C. Boher, L. Penazzi, C. Dessain and B. Tavernier. A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry. Tribology International. 52, 40-49. 2012 [DOI]
[ACL11]C. Boher, S. Le Roux, L. Penazzi and C. Dessain. Experimental investigation of the tribological behavior and wear mechanisms of tool steel grades in hot stamping of a high-strength boron steel. Wear. 294-295, 286-295. 2012 [DOI]
[ACL12]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack Propagation in Tool Steel X38CrMoV5 (AISI H11) in SET Specimens. Advanced Engineering Materials. 11(9)695-754. 2009 [DOI]
[ACL13]M. Shah, C. Boher, S. Le Roux, F. Rézaï-aria and C. Mabru. An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens. Revue de Métallurgie - Cahiers d'Informations Techniques. 106(3)140-145. 2009 [DOI] [OATAO]
[ACL14]G. Régnier, D. Dray, E. Jourdain, S. Le Roux and F. Schmidt. A simplified method to determine the 3D orientation of an injection molded fiber-filled polymer. Polymer Engineering and Science. 48(11)2159-2168. 2008 [DOI]
[ACL15]G. Dour, F. Medjedoub, S. Le Roux, G. Diaconu and F. Rézaï-aria. Normalized thermal stresses analysis to design a thermal fatigue experiment. Journal of Thermal Stresses. 28(1)1-16. 2005 [DOI]
[ACL16]A. Oudin, P. Lamesle, L. Penazzi, S. Le Roux and F. Rezai-Aria. Thermomechanical fatigue behaviour and life assessment of hot work tool steels. European Structural Integrity Society. 29, 195-201. 2002 [DOI]
[ACL17]S. Baleix, S. Le Roux, G. Bernhart and P. Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Journal of Materials Processing Technology. 118(1-3)321-328. 2001 [DOI]
[ACL18]P. Lours, S. Le Roux and G. Bernhart. Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000. Journal of Advanced Materials. 34(2)11-20. 2001

Article de revue avec comité de lecture non répertorié

[ACLN1]P. Lamesle, M. Salem, S. Le Roux, G. Dour and F. Rezai-Aria. Oxidation and corrosion effects on thermal fatigue behaviour of hot work tool steel X38CrMoV5 (AISI H11). Materials Science Forum. 595-598 , 789-796. 2008 [DOI]
[ACLN2]P. Lamesle, J. Maury and S. Le Roux. Monitoring distorsions of metallic parts during quenching. Bulletin du cercle d'études des métaux. 17(18). 2007
[ACLN3]F. Rézaï-aria, C. Boher, G. Dour, P. Lamesle and S. Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud. Bulletin du cercle d'études des métaux. 17(18). 2007

Communication invitée dans un congrès national ou international

[INV1]F. Medjedoub, G. Dour, S. Le Roux, P. Lamesle, M. Salem and F. Rézaï-aria. Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). Proceedings of 7th International Tooling Conference Invited lecture p.461-469 2006
[INV2]F. Rézaï-aria, F. Medjedoub, G. Dour and S. Le Roux. Some aspects of thermal fatigue of metallic tools. Abrasion Conference 2005 Invited lecture 2005

Communication avec actes dans un congrès international ou national

[ACT1]A. Hajjaji, R. Zitoune, L. Crouzeix, F. Collombet and S. Le Roux. Impact of the abrasive water jet milling process on the damage and surface characteristics of CFRP composite.. Proceedings of 17th european conference on composites materials. Munich 2016
[ACT2]M. Salem, P. Lamesle, H. Laribou, S. Le Roux, G. Dour and F. Rézaï-aria. Oxidation and corrosion effects on non-isothermal fatigue of hot work tool steel X38CrMoV5 (AISI H11). Proceedings of 8th International Tooling Conference p.437-445 2009
[ACT3]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack propagation in X38CrMoV5 (AISI H11) tool steel. Proceedings of 8th International Tooling Conference p.83-94 2009 [OATAO]
[ACT4]M. Shah, C. Mabru, C. Boher, S. Le Roux and F. Rézaï-aria. Crack Propagation In Tool Steel X38CrMoV5 (aisi H11) In Set Specimens. Proceedings of 27th Spring Meeting On Fatigue And Plasticity p.746-749 2008 [DOI] [OATAO]
[ACT5]P. Lamesle, J. Maury and S. Le Roux. Monitoring distorsions of metallic parts during quenching. Proceedings of 5th International Conference and European Conference on Heat Treatment 2007 p.191-198 2007
[ACT6]F. Rézaï-aria, F. Medjedoub, S. Le Roux, G. Dour, P. Hairy, H. Khang-Ny and M. Golin. An investigation on thermal fatigue surface cracking of 5CrMoV die tool steel. Proceedings of 22nd International Die Casting Congress & Exposition p.363-368 2003
[ACT7]B. Miquel, S. Jean, S. Le Roux, P. Lamesle and F. Rézaï-aria. Heat-checking of hot work tool steels. Proceedings of 9th SF2M Spring Meeting on Temperature Fatigue Interaction p.185-193 2002
[ACT8]A. Oudin, P. Lamesle, L. Penazzi, S. Le Roux and F. Rézaï-aria. Thermomechanical fatigue behaviour and life assessment of hot work tool steels. Proceedings of 9th SF2M Spring Meeting on Temperature Fatigue Interaction p.195-201 2001
[ACT9]S. Baleix, S. Le Roux, G. Bernhart and P. Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Proceedings of International Conference on Advances in Materials and Processing Technologies AMPT 99 p.1175-1184 1999
[ACT10]F. Decla, S. Le Roux, G. Bernhart, C. Levaillant and N. Fréty. Plasma sprayed electrical conductive coating on C.F.R.P. materials : microstructure and electrical properties. Proceedings of 11th International Conference on Surface Modification Technologies p.293-299 1997

Communication sans actes dans un congrès international ou national

[COM1]C. Boher, L. Penazzi, S. Le Roux, V. Lucin, S. Tovar, C. Dessain and B. Tavernier. Etude de la dégradation à hautes températures de matériaux d’outils d’emboutissage vis-à vis d’une tôle USIBOR 1500P revêtue AluSi : quantification expérimentale de l’adhésion. Congrès Moules et Outils 2011
[COM2]F. Rézaï-aria, C. Boher, G. Dour, P. Lamesle and S. Le Roux. Endommagement et durée de vie des outillages de mise en forme à chaud. Congrès national A3TS - Journées "Moules & Outils 2007
[COM3]P. Lamesle, S. Le Roux and F. Rézaï-aria. Suivi in-situ par vision artificielle des déformations d’une pièce métallique pendant une trempe. Congrès national A3TS - Journées "Moules & Outils" 2007
[COM4]G. Régnier, X. Bardet, D. Dray, E. Jourdain, F. Schmidt and S. Le Roux. Measurements of the full 3D orientation tensor of an injection molded fiber-filled polymer. Europe-China Symposium on Reinforced Polymers 2004
[COM5]F. Deschaux-beaume, C. Colin, S. Le Roux and T. Cutard. Oxydation d’un composite Si3N4-TiN : expériences et modélisation. Les Embiez - Paris (France) – Juin 2001. 2001
[COM6]F. Deschaux-beaume, C. Colin, S. Le Roux and T. Cutard. Oxydation d’un composite Si3N4-TiN : expériences et modélisation. Journées d’Automne de la Société Française de Métallurgie et de Matériaux - Paris – Oct. 2000. 2000

Communication par poster dans un congrès international ou national

[AFF1]L. Penazzi, S. Le Roux, V. Lucin, J.-M. Mouys, S. Tovar, J.-P. Arcens and C. Boher. Etude des dégradations des outils d'emboutissage et estimation des volumes d'usure. Colloque Des J. Internationales Francophones De Tribologie, Albi, 27-28 Mai 2010 2010
[AFF2]S. Le Roux, F. Medjedoub, G. Dour and F. Rézaï-aria. Application of image analysis for thermal fatigue heat checking investigations. 8th International Tooling Conference 2009
[AFF3]M. Salem, P. Lamesle, H. Laribou, S. Le Roux, G. Dour and F. Rézaï-aria. Effet de l’environnement par fatigue thermique des aciers à outils pour travail à chaud X38CrMoV5 (AISI H11). Congrès national A3TS - Journées "Moules & Outils 2007



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80