Vanessa Vidal




Maître assistant - Ecole Nationale Supérieure des Mines d'Albi-Carmaux (Mines Albi)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)



Production scientifique

32 contributions

Article de revue internationale avec comité de lecture

[ACL1]P. Planques, V. Vidal, P. Lours, V. Proton, F. Crabos, J. Huez and B. Viguier. Mechanical and thermo-physical properties of plasma sprayed thermal barrier coatings : a literature review. Oxidation of Metals. 88(1-2)133-143. 2017 [DOI]
[ACL2]R. Julien, V. Velay, V. Vidal, Y. Dahan, R. Forestier and F. Rézaï-aria. Tensile behaviour of high temperature forged Ti-6Al-4V during in-situ heat treatments. Materials Letters. 208, 7-9. 2017 [DOI]
[ACL3]P. Planques, V. Vidal, P. Lours, V. Proton, F. Crabos, J. Huez and B. Viguier. Characterization of the Mechanical Properties of Thermal Barrier Coatings by 3 Points Bending Tests and Modified Small Punch Tests. Surface and Coatings Technology. , . 2017 [DOI]
[ACL4]Y. Liu, I. Liu, P. Lours, T. Sentenac, V. Vidal, Z. Wang and K. Ding. Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness. Surface and Coatings Technology. (313)417-424. 2017 [DOI]
[ACL5]H. Matsumoto, T. Nishihara, V. Velay and V. Vidal. Superplastic Property of the Ti–6Al–4V Alloy with Ultrafine-Grained Heterogeneous Microstructure. Advanced Engineering Materials. In press, . 2017 [DOI]
[ACL6]M. Dos Santos, V. Velay, V. Vidal, G. Bernhart, G. Batalha and H. Matsumoto. Mechanical behavior of a Ti-6Al-4 V titanium alloy with microstructural evolution modeling under hot and superplastic conditions. Materialwissenschaft und Werkstofftechnik. 48(10)952-968. 2017 [DOI]
[ACL7]V. Velay, H. Matsumoto, V. Vidal and A. Chiba. Behavior modeling and microstructural evolutions of Ti–6Al–4V alloy under hot forming conditions. International Journal Of Mechanical Sciences. 108-109, 1-13. 2016 [DOI] [HAL]
[ACL8]Y. Liu, V. Vidal, S. Le Roux, F. Blas, F. Ansart and P. Lours. Influence of isothermal and cyclic oxidation on the apparent interfacial toughness in thermal barrier coating systems. Journal of the European Ceramic Society. 35(15)4269-4275. 2015 [DOI]
[ACL9]E. Cabrol, C. Boher, V. Vidal and F. Rézaï-aria. Plastic straining of cobalt-based hardfacings under friction loading. Wear. 330-331, 354-363. 2015
[ACL10]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing. Surface and Coatings Technology. 260, 90-96. 2014 [DOI]
[ACL11]L. Pin, V. Vidal, F. Blas, F. Ansart, S. Duluard, J.-P. Bonino, Y. Le Maoult and P. Lours. Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life. Journal of the European Ceramic Society. (34)961-974. 2014 [DOI]
[ACL12]V. Velay, H. Matsumoto, L. Sasaki and V. Vidal. Investigation of the mechanical behaviour of Ti-6Al-4V alloy under hot forming conditions: Experiment and Modelling. Materialwissenschaft und Werkstofftechnik. 45(9)847–853. 2014 [DOI]
[ACL13]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Reinforced sol gel thermal barrier coatings and their cyclic oxidation life. Journal of the European Ceramic Society. 33(2)269-276. 2013 [DOI]
[ACL14]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings. Surface and Coatings Technology. 206, 1609-1614. 2011 [DOI]
[ACL15]L. Thilly, S. Van Petegem, P.-O. Renault, F. Lecouturier, V. Vidal, B. Schmitt and H. Van Swygenhovenb. A new criterion for elasto-plastic transition in nanomaterials: Application to size and composite effects on Cu–Nb nanocomposite wires. Acta Materialia. 57(11)3157-3169. 2009 [DOI] [HAL]
[ACL16]V. Vidal, L. Thilly, S. Van Petegem, U. Stuhr, F. Lecouturier, P.-O. Renault and H. Van Swygenhoven. Plasticity of nanostructured Cu–Nb-based wires: Strengthening mechanisms revealed by in situ deformation under neutrons. Scripta Materialia. 60(3)171-174. 2009 [DOI]
[ACL17]J. Sniezewski, V. Vidal, P. Lours and Y. Le Maoult. Thermal Barrier Coatings adherence and spallation : interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Surface and Coatings Technology. 204, 807-811. 2009 [DOI]

Article de revue avec comité de lecture non répertorié

[ACLN1]V. Velay, H. Matsumoto, V. Vidal, L. Penazzi, F. Nazaret, Y. Marcel and M. Bouillane. Hot forming process analysis of Ti6Al-4V alloy: experiment, behaviour modelling and Finite Element simulation. Materials Science Forum. 838-839, 183-189. 2016 [DOI]

Communication avec actes dans un congrès international ou national

[ACT1]E. Cabrol, C. Boher, V. Vidal, F. Rézaï-aria and F. Touratier. Wear mechanisms of hardfaced aeronautical high temperature forging tools. Proceedings of ASMET - TOOL STEEL 2016 2016
[ACT2]E. Cabrol, C. Boher, V. Vidal, F. Touratier and F. Rezai-aria. A wear damage assessment of high temperature forging. Proceedings of Proceedings of 6th ICTMP International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, June 22–24, Darmstadt, Germany, Editors : P.Groche, Publisher: Trans Tech p.103-110 2014
[ACT3]F. Blas, F. Ansart, P. Lours, J.-P. Bonino, S. Duluard, V. Vidal and L. Pin. Microstructural control of new generation thermal barrier coatings via a sol-gel route : cyclic oxidation behaviour. Proceedings of Thermal Barrier Coatings IV - An ECI Conference Series - Irsee - Germany - June 2014 2014
[ACT4]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing. Proceedings of 41st International Conference on Metallurgical Coatings and Thin Film San Diego California April 2014 2014
[ACT5]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing.. Proceedings of 41st International Conference on Metallurgical Coatings and Thin Film San Diego California April 2014 2014
[ACT6]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Processing, repairing and cyclic oxidation behaviour of sol gel thermal barrier coatings. Proceedings of ICMCTF - 38th International Conference on Metallurgical Coatings and Thin Films - San Diego USA 2011 [DOI]
[ACT7]Y. Balcaen, V. Vidal, V. Velay, L. Robert, F. Pettinari-strumel, J. Douin and P. Lours. Comparative Study, in pure titanium sheet, of the microstructural evolution induced by incremental forming process and plane strain tensile tests. Proceedings of Proceedings of the 12th World Congresss on Titanium Beijing China 2011
[ACT8]V. Vidal, Y. Balcaen, F. Pettinar-strumel, J. Douin, P. Lours, V. Velay and L. Robert. Experimental study of the deformation mechanisms in textured pure alpha-titanium sheets. Proceedings of Proceedings of the 12th World Congresss on Titanium Beijing China 2011
[ACT9]J. Sniezewski, V. Vidal, P. Lours and Y. Le Maoult. Thermal barrier coatings adherence and spallation : interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Proceedings of ICMCTF 2009 - 36th International Conference on Metallurgical Coatings and Thin Films - San Diego USA 2009 [DOI]

Communication sans actes dans un congrès international ou national

[COM1]R. Julien, V. Velay, V. Vidal, M. Salem, Y. Dahan, R. Forestier and F. Rézaï-aria. Thermomechanical behaviour and microstructural evolution of high temperature forged Ti-6Al-4V during heat treatment quenching. 12th International Conference on the Mechanical Behavior of Materials, Karlsruhe - GERMANY 2015
[COM2]Y. Balcaen, L. Robert, V. Velay, V. Vidal and P. Lours. Accurate strain analysis of Titanium sheet in single point incremental forming process by digital image correlation. Photomechanics 2011, Brussels, Belgium, february 2011
[COM3]J. Sniezewski, V. Vidal, Y. Le Maoult and P. Lours. In situ and ex situ investigation of thermal barrier coating adherence and spallation. EUROCORR 2009 – The European Corrosion Congress - EFC Event n°310 - Nice, France, September 2009 2009

Communication par poster dans un congrès international ou national

[AFF1]Y. Balcaen, N. Decultot, V. Vidal, V. Velay, L. Robert and P. Lours. Etude des mécanismes de déformation en formage incrméntal. Colloque Plasticité 2010, Toulouse, France 2010

Brevet

[BR1]F. Nazaret, E. Lebard, Y. Le Maoult, L. Penazzi, V. Vidal and V. Velay. Procédé de pilotage d'une machine de formage superplastique et machine correspondante. Brevet No. WO2016162642, 2016



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80