Publication :


Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy

Authors: M. Shahzad, M. Chaussumier, R. Chieragatti, C. Mabru and F. Rézaï-aria
Year: 2011
Journal: Materials and Design.
Volume: 32, Number: 6, Pages: 3328-3335

DOI: 10.1016/j.matdes.2011.02.027
OATAO: 4985
Référencé ISI Web Of Science
Référencé Scopus

The present study investigates the influence of anodizing process on fatigue life of aluminium alloy 7050-T7451 by performing axial fatigue tests at stress ratio ‘R’ of 0.1. Effects of pre-treatments like degreasing and pickling employed prior to anodizing on fatigue life were studied. The post-exposure surface observations were made by scanning electron microscope (SEM) to characterize the effect of each treatment before fatigue testing. The surface observations have revealed that degreasing did not change the surface topography while pickling solution resulted in the formation of pits at the surface. Energy dispersive spectroscopy (EDS) was used to identify those constituent particles which were responsible for the pits formation. These pits are of primary concern with respect to accelerated fatigue crack initiation and subsequent anodic coating formation. The fatigue test results have shown that pickling process was detrimental in reducing the fatigue life significantly while less decrease has been observed for anodized specimens. Analyses of fracture surfaces of pickled specimens have revealed that the process completely changed the crack initiation mechanisms as compared to non-treated specimens and the crack initiation started at the pits. For most of the anodized specimens, fatigue cracks still initiated at the pits with very few cracks initiated from anodic coating. The decrease in fatigue life for pickled and anodized specimens as compared to bare condition has been attributed to decrease in initiation period and multi-site crack initiations. Multi-site crack initiation has resulted in rougher fractured surfaces for the pickled and anodized specimens as compare to bare specimens tested at same stress levels.

Bibtex citation :
Author={Shahzad, M. and Chaussumier, M. and Chieragatti, R. and Mabru, C. and R\'eza\"i-aria, F.},
Title={Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy},
Journal={Materials and Design},

INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80