Production scientifique du Groupe MICS

516 contributions trouvées correspondantes à votre recherche.

Article de revue internationale avec comité de lecture

[ACL1]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Finite Element Stereo Digital Image Correlation: framework and mechanical regularization. Experimental Mechanics. 53(7)443-456. 2017 [DOI] [HAL]
[ACL2]M. Bornert, P. Doumalin, J.-C. Dupré, C. Poilane, L. Robert, E. Toussaint and B. Wattrisse. Shortcut in DIC error assessment induced by image interpolation used for subpixel shifting. Optics and Lasers in Engineering. 91, 124-133. 2017 [DOI]
[ACL3]T. Lisle, M.-L. Pastor, C. Bouvet and P. Marguerès. Damage of woven composite under translaminar cracking tests using infrared thermography. Composite Structures. 161, 275–286. 2017 [DOI]
[ACL4]M.-Y. Nagazi, G. Brambilla, G. Meunier , P. Marguerès, J.-N. Périé and L. Cipelletti. Space-resolved diffusing wave spectroscopy measurements of the macroscopic deformation and the microscopic dynamics in tensile strain tests. Optics and Lasers in Engineering. 88, 5-12. 2017 [DOI]
[ACL5]E. Copin, X. Massol, S. Amiel, T. Sentenac, Y. Le Maoult and P. Lours. Novel erbia-yttria co-doped zirconia fluorescent thermal history sensor. Smart Materials and Structures. 26(01). 2017 [DOI]
[ACL6]I. Jovancevic, H.-H. Pham, J.-J. Orteu, R. Gilblas, J. Harvent, X. Maurice and L. Brèthes. 3D point cloud analysis for detection and characterization of defects on airplane exterior surface. Journal of Nondestructive Evaluation. Under review, . 2017
[ACL7]R. Gilblas, T. Sentenac, J.-J. Orteu, M. Sauvé, G. Sierra, P. Gacoin and O. Guillaumon. Development of an automatic defects detection prototype for optical solar reflectors (OSR) inspection. IEEE Sensors Journal. Under review, . 2017
[ACL8]Y. Liu, I. Liu, P. Lours, T. Sentenac, V. Vidal, Z. Wang and K. Ding. Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness. Surface and Coatings Technology. (313)417-424. 2017 [DOI]
[ACL9]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, L. Crouzeix, Y.-H. Grunevald and V. Nassiet. Bonded repair issues for composites: an investigation approach based on infrared thermography. NDT & E International. , . 2016 [DOI]
[ACL10]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, L. Crouzeix, Y.-H. Grunevald and V. Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography. NDT & E International. 85, 27-33. 2016 [DOI]
[ACL11]F. Berthet, F. Lachaud, M.-L. Pastor and J. Crevel. Behaviour and damage of injected carbon-fibre-reinforced polyether ether ketone: From process to modelling. Journal of Composite Materials. , . 2016 [DOI]
[ACL12]R. Gilblas and T. Sentenac. Effect and correction of the shift in spectral images for polychromatic thermography. International Journal of Thermal Sciences. 107, 153-160. 2016 [DOI]
[ACL13]B. Karabagli, T. Simon and J.-J. Orteu. A new chain-processing-based computer vision system for automatic checking of machining set-up - Application for machine tools safety. International Journal of Advanced Manufacturing Technology. 82(9)1547-1568. 2016 [DOI] [HAL]
[ACL14]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Unstructured Finite Element-based Digital Image Correlation with enhanced management of quadrature and lens distortions. Optics and Lasers in Engineering. 77, 44-53. 2016 [DOI] [HAL]
[ACL15]S. Sassi, P. Marguerès, P. Olivier and R. Begue. Determination of anisotropic geometrical parameters for the electrical characterization of carbon/epoxy composite during oven curing. Composites - Part A: Applied Science and Manufacturing. 80, 204-216. 2016 [DOI]
[ACL16]A.C. Akué Asseko , B. Cosson , &. Lafranche, F. Schmidt and Y. Le Maoult. Effect of the developed temperature field on the molecular interdiffusion at the interface in infrared welding of polycarbonate composites. Composites Part B: Engineering. 97(15)53-61. 2016 [DOI]
[ACL17]I. Viana, J.-J. Orteu, N. Cornille and F. Bugarin. Inspection of aeronautical mechanical parts with a pan-tilt-zoom camera: an approach guided by the computer-aided design model. Journal of Electronic Imaging. 24(6)061118. 2015 [DOI] [HAL]
[ACL18]I. Jovancevic, S. Larnier, J.-J. Orteu and T. Sentenac. Automated exterior inspection of an aircraft with a pan-tilt-zoom camera mounted on a mobile robot. Journal of Electronic Imaging. 24(6)061110. 2015 [DOI] [HAL]
[ACL19]F. Bugarin, A. Bartoli, D. Henrion, J.-B. Lasserre, J.-J. Orteu and T. Sentenac. Rank-Constrained Fundamental Matrix Estimation by Polynomial Global Optimization Versus the Eight-Point Algorithm. Journal of Mathematical Imaging and Vision. 53(1)42-60. 2015 [DOI] [HAL]
[ACL20]B. Vales, V. Munoz, H. Welemane, M.-L. Pastor, B. Trajin, M. Perrin, A. Cantarel and M. Karama. Heat source estimation in anisotropic materials. Composite Structures. 136, 287-296. 2015 [DOI]
[ACL21]V. Munoz, B. Vales, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography. Composites Part B: Engineering. 85, 68-75. 2015 [DOI]
[ACL22]J.-C. Passieux, J.-N. Périé and M. Salaün. A dual domain decomposition method for finite element digital image correlation. International Journal for Numerical Methods in Engineering. 102(10)1670-1682. 2015 [DOI] [HAL] [OATAO]
[ACL23]T. Lisle, C. Bouvet, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography. Composites Science and Technology. 112, 22-33. 2015 [DOI]
[ACL24]J. Harvent, B. Coudrin, L. Brèthes, J.-J. Orteu and M. Devy. Shape Measurement Using a New Multi-Step Stereo-DIC Algorithm That Preserves Sharp Edges. Experimental Mechanics. 55(1)167-176. 2015 [DOI] [HAL]
[ACL25]J.-C. Passieux, F. Bugarin, C. David, J.-N. Périé and L. Robert. Multiscale displacement field measurement using digital image correlation: Application to the identification of elastic properties. Experimental Mechanics. 55(1)121-137. 2015 [DOI] [HAL]
[ACL26]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult and E. Lafranche. Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials. Infrared Physics and Technology. 72, 293–299. 2015 [DOI]
[ACL27]T. Lisle, C. Bouvet, M.-L. Pastor, T. Rouault and P. Marguerès. Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts. Journal of Materials Science. 50(18)6154-6170. 2015 [DOI]
[ACL28]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult, R. Gilblas and E. Lafranche. Laser transmission welding of composites – Part B: Experimental validation of numerical model. Infrared Physics and Technology. 23, 304-311. 2015 [DOI]
[ACL29]A.-C. Akue Asseko, B. Cosson, M. Deleglise, F. Schmidt, Y. Le Maoult and E. Lafranche. Analytical and numerical modelling of light scattering in composite transmission laser welding process. International Journal of Material Forming. 8, 127-135. 2015 [DOI]
[ACL30]J.-C. Passieux, P. Navarro, J.-N. Périé, S. Marguet and J.-F. Ferrero. A digital image correlation method for tracking planar motions of rigid spheres: application to medium velocity impacts. Experimental Mechanics. 54(8)1453-1466. 2014 [DOI] [HAL]
[ACL31]R. Gilblas, T. Sentenac, D. Hernandez and Y. Le Maoult. Quantitative temperature field measurements on a non-grey multi-materials scene by thermoreflectometry. Infrared Physics and Technology. 66, 70-77. 2014 [DOI]
[ACL32]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. A multigrid PGD-based algorithm for volumetric displacement fields measurements. Strain. 50(4)355-367. 2014 [DOI] [HAL]
[ACL33]L. Robert and G. Dusserre. Assessment of thermoset cure-induced strains by fibre Bragg grating sensor. Polymer Engineering and Science. 54(7)1585–1594. 2014 [DOI]
[ACL34]L. Robert and G. Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer. Polymer Engineering and Science. 54(3)626-635. 2014 [DOI]
[ACL35]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing. Surface and Coatings Technology. 260, 90-96. 2014 [DOI]
[ACL36]D. Busca, M. Fazzini, B. Lorrain, S. Mistou, M. Karama and M.-L. Pastor. High-speed stereo digital image correlation : application to bi-axial fatigue. Strain. , . 2014 [DOI]
[ACL37]L. Pin, V. Vidal, F. Blas, F. Ansart, S. Duluard, J.-P. Bonino, Y. Le Maoult and P. Lours. Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life. Journal of the European Ceramic Society. (34)961-974. 2014 [DOI]
[ACL38]F. Amiot, M. Bornert, P. Doumalin, J.-C. Dupré, M. Fazzini, J.-J. Orteu, C. Poilâne, L. Robert, R. Rotinat, E. Toussaint, B. Wattrisse and J.-S. Wienin. Assessment of Digital Image Correlation measurement accuracy in the ultimate error regime: main results of a collaborative benchmark. Strain. 49(6)483-496. 2013 [DOI] [HAL]
[ACL39]J. Harvent, B. Coudrin, L. Brèthes, J.-J. Orteu and M. Devy. Multi-View Dense 3D Modelling of Untextured Objects From a Moving Projector-Cameras System. Machine Vision and Applications. 24(8)1645-1659. 2013 [DOI] [HAL]
[ACL40]T. Ben M'Barek, L. Robert, H. Sammouda, B. Charrier, J.-J. Orteu and F. Hugot. Effect of wood acetylation and additive on the tensile properties of wood fiber-HDPE composite. Journal of Reinforced plastics and composites. 32(21)1646-1655. 2013 [DOI]
[ACL41]R. Gras, H. Leclerc, S. Roux, S. Otin, J. Schneider and J.-N. Périé. Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite. Experimental Mechanics. 53(5)719-730. 2013 [DOI]
[ACL42]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and P. Prieto Corral. Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography. Composites - Part A: Applied Science and Manufacturing. 53, 75-87. 2013 [DOI]
[ACL43]A. Delmas, Y. Le Maoult, J.-M. Buchlin , T. Sentenac and J.-J. Orteu. Shape and temperature field distortions induced by convective effect on hot object in the visible, near infrared and infrared bands. Experiments in Fluids. 54(4)1452. 2013 [DOI]
[ACL44]G. Dusserre, F. Nazaret, L. Robert and T. Cutard. Applicability of image correlation techniques to characterize asymmetric refractory creep during bending tests. Journal of the European Ceramic Society. 33(2)221–231. 2013 [DOI]
[ACL45]C. Garnier, M.-L. Pastor, B. Lorrain and O. Pantalé. Fatigue behaviour of impacted composite structures. Composite Structures. 100, 443-450. 2013 [DOI]
[ACL46]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Reinforced sol gel thermal barrier coatings and their cyclic oxidation life. Journal of the European Ceramic Society. 33(2)269-276. 2013 [DOI]
[ACL47]L. Pin, C. Pilgrim, J. Feist, Y. Le Maoult, F. Ansart and P. Lours. Characterisation of thermal barrier sensor coatings synthesised by sol-gel route. Sensors and Actuators, A: Physical. , . 2013 [DOI]
[ACL48]T. Sentenac and R. Gilblas. Noise effect on the interpolation equation for near infrared thermography. Metrologia. Metrologia. 50(3)208-218. 2013
[ACL49]P. Marguerès, T. Camps, M. Viargues and P. Olivier. Preliminary experimental study on the electrical impedance analysis for in-situ monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures. Measurement Science and Technology. 24(09)10pp. 2013 [DOI]
[ACL50]E. Marin, L. Robert, S. Triollet and Y. Ouerdane. Liquid Resin Infusion process monitoring with superimposed Fibre Bragg Grating sensor. Polymer Testing. 31(8)1045-1052. 2012 [DOI] [HAL]
[ACL51]T. Sentenac, R. Gilblas, D. Hernandez and Y. Le Maoult. Bi-color near infrared thermoreflectometry: A method for true temperature field measurement. Review of Scientific Instruments. 83(12). 2012 [DOI]
[ACL52]H. Leclerc, J.-N. Périé, F. Hild and S. Roux. Digital Volume Correlation: What are the limits to the spatial resolution?. Mechanics and Industry. 13(6)361-371. 2012 [DOI]
[ACL53]J.-C. Passieux and J.-N. Périé. High resolution digital image correlation using proper generalized decomposition: PGD-DIC. International Journal for Numerical Methods in Engineering. 92(6)531-550. 2012 [DOI] [HAL]
[ACL54]P. Marguerès and F. Meraghni. Damage induced anisotropy and stiffness reduction evaluation in composite materials using ultrasonic wave transmission. Composites - Part A: Applied Science and Manufacturing. 45, 134-144. 2012 [DOI]
[ACL55]L. Robert, V. Velay, N. Decultot and S. Ramde. Identification of hardening parameters using finite element models and full-field measurements: some case studies. Journal of Strain Analysis for Engineering Design. 47(1)3-17. 2012 [DOI] [HAL]
[ACL56]M. Cusic, F. Abu-farha, P. Lours, Y. Le Maoult, G. Bernhart and M. Kraisheh. Towards superplastic forming of AZ31 magnesium alloy with controlled microstructure. Materialwissenschaft und Werkstofftechnik. 43(9)810-816. 2012 [DOI]
[ACL57]T. Ben M'Barek, L. Robert, F. Hugot and J.-J. Orteu. Mechanical behavior of wood-plastic composites investigated by 3D digital image correlation. Journal of Composite Materials. 45(26)2751-2764. 2011 [DOI]
[ACL58]M. Ben Azzouna, J.-N. Périé, J.-M. Guimard, F. Hild and S. Roux. On the Identification and Validation of an Anisotropic Damage Model Using Full-field Measurements. International Journal of Damage Mechanics. 20(8)1130-1150. 2011 [DOI]
[ACL59]H. Leclerc, J.-N. Périé, S. Roux and F. Hild. Voxel-scale digital volume correlation. Experimental Mechanics. 51(4)479-490. 2011 [DOI] [HAL]
[ACL60]J. Madiouli, J. Sghaier, J.-J. Orteu, L. Robert, D. Lecomte and H. Sammouda. Non-contact measurement of the shrinkage and calculation of porosity during the drying of banana. Drying Technology. 29(12)1358-1364. 2011 [DOI]
[ACL61]J.-J. Orteu, F. Bugarin, J. Harvent, L. Robert and V. Velay. Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results. Experimental Mechanics. 51(4)625-639. 2011 [DOI] [HAL]
[ACL62]T. Zhu, M.A. Sutton, N. Li, J.-J. Orteu, N. Cornille, X. Li and A.P. Reynolds. Quantitative stereovision in a scanning electron microscope. Experimental Mechanics. 51(1)97-109. 2011 [DOI]
[ACL63]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Discriminated measures of strain and temperature in metallic specimen with embedded superimposed long and short fibre Bragg gratings. Measurement Science and Technology. 22(1)015202. 2011 [DOI] [HAL]
[ACL64]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Simulations of an Infrared Composite Curing Process . Advanced Engineering Materials. 13(7)604-608. 2011 [DOI]
[ACL65]B. Coudrin, M. Devy, J.-J. Orteu and L. Brèthes. An innovative hand-held vision-based digitizing system for 3D modelling. Optics and Lasers in Engineering. 49(9-10)1168-1176. 2011 [DOI] [HAL]
[ACL66]C. Garnier, M.-L. Pastor, F. Eyma and B. Lorrain. The detection of aeronautical defects in-situ on composite structures using Non Destructive Testing. Composite Structures. 93(5)1328-1336. 2011 [DOI]
[ACL67]B. Cosson, F. Schmidt, Y. Le Maoult and M. Bordival. Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method. International Journal of Material Forming. (4)1–10. 2011 [DOI]
[ACL68]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings. Surface and Coatings Technology. 206, 1609-1614. 2011 [DOI]
[ACL69]J. Sniezewski, Y. Le Maoult and P. Lours. Buckling and spalling failure of alumina grown by oxidation on ODS FeCrAl alloys. Materials at High Temperatures. 28(1)17-20. 2011 [DOI]
[ACL70]O. Bourrion, C. Bernard, D. Bondoux, J.L. Bouly, J. Bouvier, B. Boyer, M. Brinet, M. Buenerd, G. Damieux, L. Derome, L. Eraud, R. Foglio, D. Fombaron, D. Grondin, M.H. Lee, L. Lutz, M. Marton, A. Menchaca-Rocha, A. Pelissier, J.N. Périé, A. Putze, S. Roudier, Y. Sallaz-Damaz, E.S. Seo, J.P. Scordilis and Y.S. Yoon. Design and construction of a Cherenkov imager for charge measurement of nuclear cosmic rays. Journal of Instrumentation. 6, P06004. 2011 [DOI] [HAL]
[ACL71]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. International Journal of Material Forming. 3(Suppl 1)587-590. 2010 [DOI]
[ACL72]M. Bordival, F. Schmidt, Y. Le Maoult and B. Cosson. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. International Journal of Material Forming. 3(Suppl 1)809– 812. 2010 [DOI]
[ACL73]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification of a macroscopic anisotropic damage model using digital image correlation and the equilibrium gap method. European Journal of Computational Mechanics. 19(1-2-3)229-240. 2010 [DOI]
[ACL74]J. Sniezewski, Y. Le Maoult, P. Lours, L. Pin, V. Minvie Bekale, D. Monceau, D. Oquab, J. Fenech, F. Ansart and J.-P. Bonino. Sol-gel thermal barrier coatings : optimization of the manufacturing route and durability under cyclic oxidation. Surface and Coatings Technology. 205, 1256-1261. 2010 [DOI]
[ACL75]J. Sniezewski, Y. Le Maoult and P. Lours. Oxidation and spallation of FeCrAl alloys and Thermal Barrier Coatings: in situ investigation under controlled temperature gradient . Materials at High Temperatures. 27(2)101-108. 2010 [DOI]
[ACL76]M. Fazzini, S. Mistou, O. Dalverny and L. Robert. Study of image characteristics on Digital Image Correlation error assessment. Optics and Lasers in Engineering. 48(3)335-339. 2010 [DOI]
[ACL77]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Measuring strains through the thickness of a composite structural specimen subjected to bending. Experimental Mechanics. 49(6)877-880. 2009 [DOI]
[ACL78]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material. Composites - Part A: Applied Science and Manufacturing. 40(11)1732–1740. 2009 [DOI]
[ACL79]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending. Composite Structures. 91(1)48-55. 2009 [DOI]
[ACL80]M. Bornert, F. Brémand, P. Doumalin, J.-C. Dupré, M. Fazzini, M. Grédiac, F. Hild, S. Mistou, J. Molimard , J.-J. Orteu, L. Robert, Y. Surrel, P. Vacher and B. Wattrisse. Assessment of Digital Image Correlation measurement errors: methodology and results. Experimental Mechanics. 49(3)353-370. 2009 [DOI] [HAL]
[ACL81]J.-N. Périé, H. Leclerc, S. Roux and F. Hild. Digital image correlation and biaxial test on composite material for anisotropic damage law identification. International Journal of Solids and Structures. 46(11-12)2388-2396. 2009 [DOI] [HAL]
[ACL82]P. Marguerès, J.-N. Périé, J.G. Perez, F. Collombet and Y.-H. Grunevald. Characterization of a composite structure obtained by RFI using HexFIT (R) semi-products. Composites Science and Technology. 69(1)117-124. 2009 [DOI]
[ACL83]Y. Qi, P. Lours, Y. Le Maoult and Z.B. Zhang. Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses. Rare Metal Materials and Engineering. 38(2)1150-1153. 2009
[ACL84]B. Cosson, F. Schmidt and Y. Le Maoult. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. International Journal of Material Forming. 2(1)267-270. 2009 [DOI]
[ACL85]M. Bordival, Y. Le Maoult and F. Schmidt. Optimization of preform temperature distribution for the stretch-blow molding of PET bottles: Infrared heating and blowing modelling. Polymer Engineering and Science. 49(4)783-793. 2009 [DOI]
[ACL86]J.-J. Orteu. 3-D Computer Vision in Experimental Mechanics. Optics and Lasers in Engineering. 47(3-4)282-291. 2009 [DOI]
[ACL87]A. Benoit, S. Guérard , B. Gillet, G. Guillot, F. Hild, D. Mitton, J.-N. Périé and S. Roux. 3D analysis from micro-MRI during in situ compression on cancellous bone. Journal of Biomechanics. 42(14)2381-2386. 2009 [DOI] [HAL]
[ACL88]J. Sniezewski, V. Vidal, P. Lours and Y. Le Maoult. Thermal Barrier Coatings adherence and spallation : interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Surface and Coatings Technology. 204, 807-811. 2009 [DOI]
[ACL89]Y. Qi, P. Lours and Y. Le Maoult. Spallation process of thermally grown oxides by in situ CCD monitoring technique. Journal of Iron and Steel Research International. 16(6)90-94. 2009
[ACL90]M.A. Sutton, J.H. Yan, V. Tiwari, H.W. Schreier and J.-J. Orteu. The Effect of Out of Plane Motion on 2D and 3D Digital Image Correlation Measurements. Optics and Lasers in Engineering. 46(10)746-757. 2008 [DOI]
[ACL91]J.-J. Orteu, Y. Rotrou, T. Sentenac and L. Robert. An Innovative Method for 3-D Shape, Strain and Temperature Full-Field Measurement using a Single Type of Camera: Principle and Preliminary Results. Experimental Mechanics. 48(2)163-179. 2008 [DOI] [HAL]
[ACL92]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles. International Journal of Material Forming. 1(1)1023-1026. 2008 [DOI]
[ACL93]P. Marguerès, J. Lopez-torres, J.-N. Périé, K. Syed Muhammad and F. Collombet. Combined approach for the characterization of composites manufactured by RFI and industrial application. Journal of Composite Materials. 42(2)189-209. 2008 [DOI]
[ACL94]J. Sniezewski, Y. Le Maoult and P. Lours. In Situ Thermal Gradient Controlled Investigation of Spallation - Experimental Design and Preliminary Results. Materials Science Forum. 595-598, 1135-1143. 2008
[ACL95]P. Lours, J. Sniezewski, Y. Le Maoult and B. Pieraggi. Direct observations and analysis of the spallation of alumina scales grown on PM2000 alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 480(1-2)40-48. 2008 [DOI]
[ACL96]L. Robert, F. Nazaret, T. Cutard and J.-J. Orteu. Use of 3-D Digital Image Correlation to characterize the mechanical behavior of a Fiber Reinforced Refractory Castable. Experimental Mechanics. 47(6)761-773. 2007 [DOI] [HAL]
[ACL97]M.A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S.R. McNeill, H.W. Schreier, X. Li and A.P. Reynolds. Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements - Part II: Experimental Validation for Magnifications from 200 to 10,000. Experimental Mechanics. 47(6)789-804. 2007 [DOI]
[ACL98]J.-J. Orteu, T. Cutard, D. Garcia, E. Cailleux and L. Robert. Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres. Strain. 43(2)96-108. 2007 [DOI]
[ACL99]Y. Le Maoult, T. Sentenac, J.-J. Orteu and J.-P. Arcens. Fire Detection: A New Approach Based on a Low Cost CCD Camera in the Near Infrared. Process Safety and Environmental Protection. 85 (B3)193-206. 2007 [DOI]
[ACL100]P. Lours, Y. Qi, Y. Le Maoult and B. Pieraggi. in situ and ex situ investigation of the spallation of thermally grown oxides. Materials Science Forum. 539-543, 1134. 2007
[ACL101]M.A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S.R. McNeill, H.W. Schreier and X. Li. Metrology in a scanning electron microscope: theoretical developments and experimental validation. Measurement Science and Technology. 17(10)2613-2622. 2006 [DOI]
[ACL102]Y. Rotrou, T. Sentenac, Y. Le Maoult, P. Magnan and J. Farré. Near infrared thermography with silicon FPA - Comparison to MWIR and LWIR thermography. Quantitative InfraRed Thermography. 3(1)93-115. 2006 [DOI]
[ACL103]J.F. Agassant, D. Arda, C. Combeau, A. Merten, H. Munstedt, M.R. Mackley, L. Robert and B. Vergnes. Polymer processing extrusion instabilities and methods for their elumination or minimisation. International Polymer Processing. 21(3)239-255. 2006 [DOI]
[ACL104]T. Sentenac, Y. Le Maoult, J.-J. Orteu and G. Boucourt. Overheating, Flame, Smoke and Freight Movement detection Algorithms based on CCD camera for Aircraft Cargo holds Surveillance. Optical Engineering. 43(12)2935-2953. 2004 [DOI]
[ACL105]S. Monteix, Y. Le Maoult, F. Schmidt and J.P. Arcens. Quantitative infrared thermography applied to blow moulding process : measurement of a heat transfer coefficient. Quantitative InfraRed Thermography. 1(2)133-150. 2004 [DOI]
[ACL106]P. Lours, Y. Le Maoult, D. Adé and B. Pieraggi. Direct Examinations of Oxide Scales Upon Cooling: a New Way to Analyse Oxide Scale Spallation. Materials Science Forum. 461-464, 639-646. 2004
[ACL107]T. Sentenac, G. Rolland, Y. Le Maoult and M. Devy. Temperature correction of radiometric and geometric models for an uncooled CCD camera in the near infrared.. IEEE Transactions On Instrumentation and Measurement. 52(1)46-60. 2003 [DOI]
[ACL108]F. Schmidt, Y. Le Maoult and S. Monteix. Modelling of infrared heating of thermoplastic sheet used in thermoforming process . Journal of Materials Processing Technology. 143 , 225-231 . 2003 [DOI]
[ACL109]D. Garcia, J.-J. Orteu and L. Penazzi. A Combined Temporal Tracking and Stereo-correlation Technique for Accurate Measurement of 3D Displacements: Application to Sheet Metal Forming. Journal of Materials Processing Technology. 125-126, 736-742. 2002 [DOI]
[ACL110]T. Sentenac, Y. Le Maoult, J.-J. Orteu and G. Boucourt. Evaluation of a charge-coupled-device-based Video Sensor for Aircraft Cargo Surveillance. Optical Engineering. 41(4)796-810. 2002 [DOI]
[ACL111]S. Claudinon, P. Lamesle, J.-J. Orteu and R. Fortunier. Continuous in-situ measurement of quenching distortions using computer vision. Journal of Materials Processing Technology. 122(1)69-81. 2002 [DOI] [HAL]
[ACL112]S. Monteix, F. Schmidt and Y. Le Maoult. Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating . Journal of Materials Processing Technology. 119( 1-3 ) 90-97. 2001 [DOI]
[ACL113]N. Reuge, F. Schmidt and Y. Le Maoult. Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations . Polymer Engineering and Science. 41 (3)522-531. 2001 [DOI]
[ACL114]P. Marguerès, F. Meraghni and M.L. Benzeggagh . Comparison of stiffness measurements and damage investigation techniques for a fatigued and post-impact fatigued GFRP composite obtained by RTM process. Composites - Part A: Applied Science and Manufacturing. 31(2)151-163. 2000 [DOI]
[ACL115]M. Devy, J.-J. Orteu, J.-L. Fuentes-cantillana, J.-C. Catalina, A. Rodriguez, D. Dumahu and P. Villeneuve De Janti. Mining Robotics: Application of Computer Vision to the Automation of a Roadheader. Robotics and Autonomous Systems. 11(2)65-74. 1993 [DOI]

Article de revue avec comité de lecture non répertorié

[ACLN1]I. Jovancevic, H.-H. Pham, J.-J. Orteu, R. Gilblas, J. Harvent, X. Maurice and L. Brèthes. Détection et caractérisation de défauts de surface par analyse des nuages de points 3D fournis par un scanner. Instrumentation Mesure Metrologie. Under review, . 2017
[ACLN2]S. Sassi, P. Marguerès, R. Le Begue, M. Mounkaila, P. Olivier and T. Camps. Détermination des paramètres géométriques pour la caractérisation électrique d’un composite T700/M21 en cours de cuisson. Matériaux et Techniques. 104(4)411,1-411,9. 2016 [DOI]
[ACLN3]M. Rollin, V. Velay, L. Penazzi, T. Pottier, T. Sentenac, L. Irranzo-perez, A. Dupuy and G. Khélifati. Thermo-mechanical modeling of distortions promoted during cooling of Ti-6Al-4V part produced by superplastic forming. Materials Science Forum. 838-839, 196-201. 2016 [DOI]
[ACLN4]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Determination of the elastic properties in CFRP composites : comparison of different approaches based on tensile tests and ultrasonic characterization. Advances in Aircraft and Spacecraft Science. , . 2014
[ACLN5]A.-C. Akue Asseko, B. Cosson, F. Schmidt, R. Gilblas, Y. Le Maoult and E. Lafranche. Thermal modeling in composite transmission laser welding process: light scattering and absorption phenomena coupling . Key Engineering Materials. 611-612, 1560-1567. 2014 [DOI]
[ACLN6]P. Marguerès, T. Camps and P. Olivier. Impédancemétrie électrique pour le monitoring de composites carbone/époxy. Revue des Composites et des Materiaux Avances. 24(2)207-220. 2014 [DOI]
[ACLN7]E. Péronnet, M.-L. Pastor, R. Huillery, O. Dalverny, S. Mistou, M. Karama and S. Génot. Non destructive investigation of defects in composite structures by fullfield measurement methods. Key Engineering Materials. 550, 135-142. 2013 [DOI]
[ACLN8]S. Nakouzi, F. Berthet, Y. Le Maoult and F. Schmidt. Simulations of an Infrared Composite Curing Process. Key Engineering Materials. 554-557, 1517-1522. 2013 [DOI]
[ACLN9]A. El Bakali , O. De Almeida, J. Bikard, M. Villiere, F. Schmidt, Y. Le Maoult and M. Dauphin. Simulation of IR heating for composite stamping. Key Engineering Materials. 554-557, 1523-1529. 2013 [DOI]
[ACLN10]G. Bernhart, J.-P. Arcens and Y. Le Maoult. Innovative Superplastic Forming Based on In-Situ Infra-Red Sheet Heating . Materials Science Forum. 735, 415-421. 2013
[ACLN11]A. Delmas, J.-M. Buchlin, Y. Le Maoult, T. Sentenac and J.-J. Orteu. Mesure de température et de déformation à hautes températures par caméra proche IR et/ou IR : problème de l'effet mirage. Contrôles-Essais-Mesures. (38)103-107. 2012
[ACLN12]F. Schmidt, S. Nakouzi, Y. Le Maoult, F. Berthet, D. Delaunay and V. Sobotka. Optimization of the incident IR heat flux upon a 3D geometry,composite part (Carbon/Epoxy). Key Engineering Materials. 504-506, 1085-1090. 2012 [DOI]
[ACLN13]E. Péronnet, F. Eyma, M.-L. Pastor and H. Welemane. Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. Contrôles-Essais-Mesures. 37, 65-70. 2011
[ACLN14]M.-L. Pastor, C. Pescay and C. Garnier. Comparison of two Nondestructive Tests in Carbon/Epoxy Composites. Journal of Materials Science and Engineering . 4(10). 2010
[ACLN15]L. Pin, F. Ansart, J. Fenech, P. Lours, J.-P. Bonino, J. Sniezewski and Y. Le Maoult. Advances in the field of new smart thermal barrier coatings. Advances in Science and Technology. 66, 136-141. 2010 [DOI]
[ACLN16]B. Mascaro, N. Dominguez, P. Marguerès and V. Gibiat. Caractérisation ultrasonore de la porosité dans les composites carbone/epoxy stratifiés - Evaluation globale et détection de zones de porosité localisées dans l'épaisseur.. Revue des Composites et des Materiaux Avances. 17(2)157-167. 2007 [DOI]
[ACLN17]S. Hmida-maamar, F. Schmidt, L. Robert, V. Velay and D. Mercier. Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage. Matériaux et Techniques. 94(5)371-378. 2006 [DOI]
[ACLN18]J.-J. Orteu, N. Cornille, D. Garcia, M.A. Sutton and S.R. McNeill. Calibrage d'imageurs avec prise en compte des distorsions. Photoniques - La Revue de la Société Française d'Optique. 20, . 2005
[ACLN19]N. Cornille, D. Garcia, M.A. Sutton, S.R. McNeill and J.-J. Orteu. Calibrage d'imageurs avec prise en compte des distorsions. Instrumentation Mesure Metrologie. 4(3-4/2004). 2005
[ACLN20]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI avec le matériau HexFITTM. Revue des Composites et des Materiaux Avances. 15(3)401-412. 2005 [DOI]
[ACLN21]M. Mulle, F. Collombet, B. Trarieux, J.-N. Périé and Y.-H. Grunevald. Démonstrateur technologique multi-instrumenté (réseaux de Bragg et mesure de champs). Vers un dialogue essais/calculs multi-échelle. Revue des Composites et des Materiaux Avances. 15(1)33-51. 2005 [DOI]
[ACLN22]J.-J. Orteu. La Photomécanique : les techniques optiques appliquées à la mécanique. Photoniques - La Revue de la Société Française d'Optique. 16, . 2004
[ACLN23]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.H. Grunevald. Mesures de champs par stéréocorrélation sur éprouvettes technologiques composites instrumentées par capteurs à fibre optique à réseaux de Bragg : comparaison et validation des mesures. Instrumentation Mesure Metrologie. 4(3-4)167-192. 2004
[ACLN24]J.-J. Orteu, D. Garcia and M. Devy. Mesure de formes et de champs de déplacements tridimensionnels par stéréo-corrélation d'images : applications en mécanique expérimentale. Photoniques - La Revue de la Société Française d'Optique. 10, . 2003
[ACLN25]S. Claudinon, R. Fortunier , P. Lamesle and J.-J. Orteu. Suivi continu par vision de la distorsion d'outils au traitement thermique. Bulletin du cercle d'études des métaux. 16(17)22.1-22.7. 1998
[ACLN26]J.-L. Fuentes-cantillana, J.-C. Catalina, A. Rodriguez, M. Devy and J.-J. Orteu. Robotisation d'une machine à attaque ponctuelle lors d'une opération d'abattage sélectif. Mines et Carrières - Les Techniques, Éditions ESKA. I-II/94, . 1994
[ACLN27]J.-J. Orteu, M. Devy and M. Briot. Mining robotics : Application of computer vision to the automation of a roadheader. Revue d'Automatique et de Productique Appliquées. 4(4/1991). 1992
[ACLN28]J.-J. Orteu and M. Briot. Le robot dans la mine. Courrier du CNRS, Dossiers scientifiques "Signaux et Images". 77, . 1991

Articles dans des revues sans comité de lecture

[ASCL1]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures. Nonconventional technologies review. XVII(4). 2013
[ASCL2]B. Coudrin, M. Devy, J.-J. Orteu and L. Brèthes. Precise registration of 3D images acquired from a hand-held visual sensor. Lecture Notes in Computer Science. 6915, 712-723. 2011 [DOI]
[ASCL3]H. Leclerc, J.-N. Périé, S. Roux and F. Hild. Integrated Digital Image Correlation for the Identification of Mechanical Properties. Lecture Notes in Computer Science. 5496, 161-171. 2009 [DOI]

Communication invitée dans un congrès national ou international

[INV1]J.-J. Orteu. Computer-vision-based NDE in aeronautics. 5th International Symposium on Experimental Mechanics + 9th Symposium on Optics in Industry (ISEM-SOI'2015), Guanajuato (Mexico), 17-21 August 2015 Invited plenary lecture 2015 [HAL]
[INV2]J.-J. Orteu. Computer-vision-based NDE in aeronautics. 6th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS'2015), Antwerp (Belgium), 8-9 April 2015 Invited keynote lecture 2015 [HAL]
[INV3]F. Hild, M. Ben Azzouna, R. Gras, H. Leclerc, J.-N. Périé and S. Roux. On the Use of Full-field Measurements to Identify Model Parameters of Various Composite Materials. International Workshop on Computational and Experimental Mechanics of Advanced Materials Invited lecture 2013
[INV4]L.A.G. Perini, J.-C. Passieux and J.-N. Périé. On the use of PGD to deal with large scale FE-based DIC problems. IUTAM Symposium on Advances of Optical Methods in Experimental Mechanics (Taipei, Taiwan) Invited lecture 2012
[INV5]I. Viana, R. Parlouar, J.-J. Orteu and L. Brèthes. Fast Automated Inspection of Mechanical Assemblies using a combined 2D/3D vision approach. IUTAM Symposium on Advances of Optical Methods in Experimental Mechanics, Taipei (Taiwan), 3-6 November 2012 Invited lecture 2012
[INV6]J.-J. Orteu. Mesure de formes par corrélation multi-images. Journée GDR ISIS/club EEA ”Mesure industrielle par vision”, Paris (France), 2 février 2011 Invited lecture 2011
[INV7]J.-N. Périé, G. Besnard, F. Hild, H. Leclerc, J. Réthoré and S. Roux. La corrélation d’images : un outil de mécanique expérimentale. Astelab, Parc des Expositions, Paris (France) Invited lecture 2010
[INV8]G. Besnard, F. Hild, H. Leclerc, J.-N. Périé and S. Roux. La corrélation d'images numériques : un outil de mécanique expérimentale. Proceedings of Aussois 2010 - Colloque National MECAMAT « Nouvelles approches en mécanique des matériaux », Aussois (France) Invited lecture p.30-45 2010
[INV9]F. Hild, H. Leclerc, J.-N. Périé, J. Réthoré and S. Roux. Mechanics-based Volume Correlation: Applications in Mechanics and Biomechanics. SEM 2009, Conference on Advanced Imaging Methods for Accurate Deformation, Motion and Shape Measurements: Recent Developments and Applications, Fall Workshop and Conference, Columbia, SC (USA) Invited plenary lecture 2009
[INV10]J.-J. Orteu. Multi-view-DIC-based 3D measurements. 2009 SEM Fall Symposium and Workshop, Columbia, South Carolina (USA), 5-7 October 2009 Invited keynote lecture 2009
[INV11]S. Roux, J.-N. Périé and F. Hild. 3D Digital Image Correlation technique applied to in situ loaded foam-like materials. ESMC2009 - 7th EUROMECH Solid Mechanics Conference, Lisbon (Portugal) Invited lecture 2009
[INV12]J.-J. Orteu. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Journée Technologique PFT Rascol ”La numérisation des formes, du réel au support numérique 3D : la rétro-conception”, Albi (France), 31 mars 2009 Invited lecture 2009
[INV13]J.-N. Périé, F. Hild and S. Roux. De la corrélation d’images numériques à l’identification en mécanique des solides. 43ème Colloque du Groupe Français de Rhéologie, Ecole Polytechnique, Palaiseau (France) Invited lecture 2008
[INV14]S. Roux, L. Crouzeix, J.-N. Périé and F. Hild. On the use of (static) digital image correlation for identifying material heterogeneities and non linear behaviors, 2-6 juin, 2008. Réunion annuelle du Groupement Européen, Ultra-Sound propagation studies for CND applications, Anglet (France) Invited lecture 2008
[INV15]J.-J. Orteu. 3-D computer vision in experimental mechanics. 3rd Workshop on Optical Measurement Techniques of Structures and Systems (OPTIMESS'2007), Leuven (Belgium), 28-29 May 2007 Invited keynote lecture 2007
[INV16]P. Lours, Y. Qi, Y. Le Maoult and B. Pieraggi. In situ and ex situ investigation of the spallation of thermally grown oxides . THERMEC 2006 - PROCEEDINGS INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, VANCOUVER, CANADA, JULY 2006 published in Materials Science Forum Invited lecture 2006
[INV17]J.-J. Orteu. Mesures 3D par stéréo-corrélation. Journée thématique de l'AFVL : mesures de déplacements appliquées à la mécanique des fluides et des solides, Meudon (France), 16 juin 2005 Invited lecture 2005
[INV18]J.-J. Orteu. 3-D computer vision in experimental mechanics. Workshop on Optical Methods, Valladolid (Spain), 31 March 2005 Invited lecture 2005
[INV19]P. Lours, Y. Le Maoult, D. Adé and B. pieraggi. Direct examinations of oxide scales upon cooling: a new way to analyse oxide scale spallation . 6TH INTERNATIONAL CONFERENCE ON HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS - Les Embiez, France, May 2004 Invited keynote lecture 2004
[INV20]J.-J. Orteu. 3-D computer vision in experimental mechanics. Belgian-French Workshop on Optical Methods : Introduction to Full Field Optical Measurement Techniques - Application to Experimental Mechanics, Katholieke Universiteit Leuven (Belgium), 17 June 2003 Invited keynote lecture 2003
[INV21]J.-J. Orteu. La Vision par Ordinateur en Midi-Pyrénées. Conférence introductive à la Journée VISIOMIP, Rencontres Laboratoires/Entreprises, Cahors (France), 7 juin 2001 Invited plenary lecture 2001
[INV22]J.-G. Postaire and J.-J. Orteu. Contrôle des procédés de fabrication dans l'industrie du verre par vision artificielle. Journée "Apports de la Vision Industrielle au Contrôle Qualité" du pôle Essais Non Destructifs COFREND Grand Sud-Ouest, Toulouse (France), 30 mai 2001 Invited lecture 2001
[INV23]J.-J. Orteu. Mesure de déformations par stéréovision. Conférence T.I.P.E. ”La mesure”, Albi (France), 15-16 avril 1997 Invited lecture 1997
[INV24]J.-J. Orteu. Exploitation du sous-sol terrestre ou marin. Colloque Franco-Canadien : ”A l'aube du Machinisme Intelligent”, Ottawa (Canada), 19-21 mai 1992 Invited lecture 1992
[INV25]J.-J. Orteu. Robotique minière : automatisation d'une machine d'abattage minier par capteurs visuels. Journées d'Études GAMI ”Vision Industrielle : État de l'art et Perspectives”, Saint-Ouen (France), 10-11 Mars 1992 Invited lecture 1992

Communication avec actes dans un congrès international ou national

[ACT1]J. Serra, J.E. Pierré, J.N. Périé, J.C. Passieux, C. Bouvet and B. Castanié. Modélisation d’essais structuraux sur plaques entaillées. Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-9 2017
[ACT2]S.A. Chelaghma, O. De Almeida, J.-N. Périé, P. Marguerès, B. Reine, A. Vinet and J.-C. Passieux. Etude de la morphologie cristalline et modélisation de la cinétique du PEKK (Poly-Ether- Cétone-Cétone). Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-4 2017
[ACT3]R. Bouclier, J.-C. Passieux and J.-N. Périé. Une méthode de couplage de domaines pour la mesure de champs par corrélation d’images numériques éléments finis. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-8 2017
[ACT4]J. Serra, J.E. Pierré, J.-N. Périé, J.-C. Passieux, C. Bouvet and B. Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-7 2017
[ACT5]S. Chelaghma, O. De Almeida, P. Marguerès, J.-C. Passieux, J.-N. Périé, B. Reine and A. Vinet. Edude de la morphologie cristalline du PEKK et caractérisation de la cinétique de cristallisation des composites à matrice PEKK.. Proceedings of JST AMAC - Mise en OEuvre des Composites à Matrice Thermoplastique 2017
[ACT6]S. Boztepe, R. Gilblas, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. Proceedings of 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING 2017
[ACT7]S. Boztepe, R. Gilblas, O. De Almeida, F. Schmidt and Y. Le Maoult. The role of microcrystalline structure on the temperature-dependent thermo-optical properties of semi-crystalline thermoplastics and non-invasive temperature measurements . Proceedings of 25ème Congrès Français de Thermique (SFT) 2017
[ACT8]Q. Sirvin, V. Velay, R. Bonnaire and L. Penazzi. Mechanical Behavior And Modelisation Of Ti-6Al-4V Titanium Sheet Under Hot Stamping Conditions. Proceedings of ESAFORM 2017 2017
[ACT9]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Displacement and rotation fields measurement using Finite Element Stereo Digital Image Correlation. Proceedings of 17th International Conference on Experimental Mechanics, ICEM17 (Rhodes, Greece) 2016
[ACT10]J.-C. Passieux, R. Bouclier and J.-N. Périé. DD-DIC : a parallel finite element based digital image correlation solver. Proceedings of SEM XIII International Congress, Orlando, Floride p.55-59 2016 [DOI]
[ACT11]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Finite Element Stereo Digital Image Correlation Measurement for a Plate Model. Proceedings of SEM XIII International Congress, Orlando, Floride p.199-202 2016 [DOI]
[ACT12]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, V. Nassiet, L. Crouzeix and Y.-H. Grunevald. A new NDT method for the study of composite bonded repair. Proceedings of 17th European Conference on Composite Materials (ECCM17) 2016
[ACT13]I. Jovancevic, A. Arafat, J.-J. Orteu and T. Sentenac. Airplane tire inspection by image processing techniques. Proceedings of 5th Mediterranean Conference on Embedded Computing (MECO'2016), Bar (Montenegro), 12-16 June 2016 2016 [DOI] [HAL]
[ACT14]S. Sassi, P. Marguerès, M. Mounkaila, T. Camps and P. Olivier. GEOMETRICAL INVESTIGATION FOR THE ELECTRICAL CHARACTERIZATION OF T700/M21 CFRP COMPOSITE DURING CURING. Proceedings of ECCM17 2016
[ACT15]R. Gilblas, T. Sentenac, Y. Le Maoult and D. De Sousa Meneses. Thermographie monochromatique exploitant l’invariance de l’émissivité avec la température. Proceedings of congrès français de thermique 2016
[ACT16]T. Baumard, O. De Almeida, G. Menary, Y. Le Maoult, F. Schmidt and J. Bikard. Determination of Thermal Contact Conductance in Vacuum-Bagged Thermoplastic Prepreg Stacks Using Infrared Thermography. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT17]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT18]A.C. Akué Asseko, E. Lafranche, B. Cosson, F. Schmidt and Y. Le Maoult. Infrared welding process on composite: Effect of interdiffusion at the welding interface. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT19]I. Jovancevic, I. Viana, J.-J. Orteu, T. Sentenac and S. Larnier. Matching CAD model and image features for robot navigation and inspection of an aircraft. Proceedings of 5th International Conference on Pattern Recognition Applications and Methods (ICPRAM'2016), Roma (Italy), 24-26 February 2016 p.359-366 2016 [DOI] [HAL]
[ACT20]I. Jovancevic, J.-J. Orteu, T. Sentenac and R. Gilblas. Inspection d'un aéronef à partir d'un système multi-capteurs porté par un robot mobile. Proceedings of 14ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Lannion (France), 16-20 novembre 2015. 2015 [HAL]
[ACT21]R. Gilblas, T. Sentenac and J.-J. Orteu. Sélection de méthodes optiques pour la détection de défauts sur les réflecteurs optiques solaires (OSR). Proceedings of 14ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Lannion (France), 16-20 novembre 2015. 2015 [HAL]
[ACT22]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Stéréo Corrélation d’Images Numériques et Régularisation Mécanique. Proceedings of CFM, Congrès Français de Mécanique, 24-28 August, Lyon, FR 2015
[ACT23]S. Sassi, P. Marguerès, R. Le Begue and P. Olivier. DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING. Proceedings of 20th International Conference on Composite Materials - ICCM20 2015
[ACT24]M. Barus, F. Collombet, H. Welemane, L. Crouzeix, A. Cantarel, Y.-H. Grunevald, V. Nassiet and M.-L. Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials. Proceedings of 20th International Conference on Composite Materials 2015 [OATAO]
[ACT25]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Méthode de Stéréo Corrélation d'Images Numériques régularisée par une cinématique plaque. Proceedings of JNC 19, Lyon, FR 2015
[ACT26]I. Jovancevic, J.-J. Orteu, T. Sentenac and R. Gilblas. Automated visual inspection of an airplane exterior. Proceedings of 12th International Conference on Quality Control by Artificial Vision (QCAV’2015), Le Creusot (France), 3-5 June 2015 2015 [DOI] [HAL]
[ACT27]I. Viana, F. Bugarin, N. Cornille and J.-J. Orteu. CAD-guided inspection of aeronautical mechanical parts using monocular vision. Proceedings of 12th International Conference on Quality Control by Artificial Vision (QCAV’2015), Le Creusot (France), 3-5 June 2015 2015 [DOI] [HAL]
[ACT28]C. Bouvet, T. Lisle, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Mesure de la ténacité de la rupture de fibres en compression par thermographie infrarouge. Proceedings of JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet 2015
[ACT29]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification de mécanismes d'endommagement de stratifiés carbone/époxy par couplage entre émission acoustique et thermographie infrarouge. Proceedings of Journées Scientifiques et techniques, Cachan, France, 12 mars 2015 2015
[ACT30]M. Futterlieb, V. Cadenat and T. Sentenac. A Navigational Framework Combining Visual Servoing and Spiral Obstacle Avoidance Techniques. Proceedings of International Conference on Informatics in Control, Automation and Robotics ( ICINCO ) , Sep 2014, Vienna, Austria. p.57-64 2014 [DOI]
[ACT31]R. Gilblas, T. Sentenac, Y. Le Maoult and D. Hernandez. NON CONTACT TEMPERATURE FIELD MEASUREMENT ON NON-UNIFORM DYNAMICAL SCENES: CONTRIBUTION OF THERMOREFLECTOMETRY. Proceedings of IHTC 2014
[ACT32]V. Munoz, B. Vales, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Coupling infrared termography and acoustic emission for damage study in CFRP. Proceedings of Qirt 2014, the 12th International Conference on Quantitative Infrared Thermography, France 2014
[ACT33]S. Sassi, P. Marguerès, T. Camps, M. Mounkaila and P. Olivier. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part II : Multi-Physical Correlations. Proceedings of EWSHM 2014 p.567-574 2014
[ACT34]M. Mounkaila, T. Camps, S. Sassi, P. Marguerès, P. Olivier, C. Escriba and J.-Y. Fourniols. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity. Proceedings of EWSHM 2014 p.560-566 2014
[ACT35]E. Copin, Y. Le Maoult, T. Sentenac, F. Blas, T.H.G. Tran and P. Lours. Comparison of IR Thermography and Reflectance-Enhanced Photoluminescence for early Quantitative Diagnostic of Thermal Barrier Coatings Spallation. Proceedings of 12th International Conference on Quantitative InfraRed Thermography (QIRT 2014), Bordeaux, 07 - 11 July 2014 2014
[ACT36]J.-C. Passieux, F. Bugarin, J.-N. Périé, L. Robert and C. David. Multiscale FE-based DIC for improved full-field measurements and identification. Proceedings of 16th International Conference on Experimental Mechanics, ICEM16 (Cambridge, UK) 2014
[ACT37]R. Gilblas, T. Sentenac, D. Hernandez, O. Chazot and Y. Le Maoult. Temperature monitoring on a plasmatron experiment by pyroreflectometry. Proceedings of Quantitative InfraRed Thermography (QIRT) 2014
[ACT38]L. Robert, J.-C. Passieux, F. Bugarin, C. David and J.-N. Périé. Multiscale FE-based DIC for enhanced measurements and constitutive parameter identification. Proceedings of Annual Conference & Exposition on Experimental and Applied Mechanics, SEM2014 (Greenville, USA) p.265-275 2014 [DOI]
[ACT39]T. Lisle, C. Bouvet, M.-L. Pastor and P. Marguerès. An experimental study of damage evolution in 2D thin woven composite under quasi-static loading using infrared thermography. Proceedings of ECCM16 2014
[ACT40]S. Petrocelli, T. Sentenac and Y. Le Maoult. 3D Thermal Imaging: An approach towards true field temperature measurement. Proceedings of 2014 Quantitative InfraRed Thermography 2014 [DOI]
[ACT41]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy. Proceedings of JET 2014, Journées d'études techniques de Marrakech, Maroc, avril 2014 2014
[ACT42]T. Lisle, N. Hongkarnjanakul, C. Bouvet, M.-L. Pastor, P. Marguerès and S. Rivallant. Measure of fracture toughness in composite structures using Infrared Thermography. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT43]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing. Proceedings of 41st International Conference on Metallurgical Coatings and Thin Film San Diego California April 2014 2014
[ACT44]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart, V. Vidal and P. Lours. Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing.. Proceedings of 41st International Conference on Metallurgical Coatings and Thin Film San Diego California April 2014 2014
[ACT45]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification of the elastic properties in CFRP composites. Proceedings of ACMA 2014 5th International Symposium on Aircraft Materials, Maroc, avril 2014 2014
[ACT46]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force estimation through high speed digital image correlation. Proceedings of 21th DYMAT technical meeting: High speed imaging for dynamic testing of material and structures (London, UK) 2013
[ACT47]B. Karabagli, T. Simon and J.-J. Orteu. Vérification automatique des montages d'usinage par vision artificielle - Application à la sécurisation de l'usinage. Proceedings of 13ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Orléans (France), 18-22 novembre 2013. 2013
[ACT48]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification of the elastic properties of composite materials. Proceedings of 5th International Conference on Structural Analysis of Advanced Materials 2013
[ACT49]P. Marguerès, T. Camps, P. Olivier, S. Sassi and M. Mounkaila. CURE MONITORING OF CFRP: ELECTRICAL IMPEDANCE ANALYSIS. Proceedings of 19th International Conference on Composite Materials - ICCM19 2013
[ACT50]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. La PGD au service de la mesure de champs cinématiques volumiques. Proceedings of CFM 2013 - 21e Congrès Français de Mécanique. (Bordeaux, Fr) 2013
[ACT51]T. Ben M'barek, L. Robert, H. Sammouda, B. Charrier, J.-J. Orteu and F. Hugot. Analyse du comportement mécanique de composites bois/plastique en utilisant des mesures en surface par stéréo-corrélation d'images numériques. Proceedings of 21ème Congrès Français de Mécanique, Bordeaux (France), 26-30 août 2013 2013
[ACT52]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Stratégies d'identification de paramètres constitutifs à partir de mesures par corrélation d'images multi-résolutions. Proceedings of 21ème Congrès Français de Mécanique, 26-30 août (Bordeaux, Fr) 2013
[ACT53]J.-C. Passieux, P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero and J.-N. Périé. Experimental study of impacts on helicopter blades using digital image correlation. Proceedings of 19th International Conference on Composite Materials, ICCM19, (Montréal, Canada) 2013
[ACT54]J. Harvent, B. Coudrin, L. Brèthes, J.-J. Orteu and M. Devy. Shape Measurement Using a New 3D-DIC Algorithm That Preserves Sharp Edges. Proceedings of SEM 2013 Annual Conference on Experimental and Applied Mechanics, Lombard, Ilinois (USA), 3-6 June 2013. 2013
[ACT55]S. Sassi, P. Marguerès, T. Camps and P. Olivier. Suivi de cuisson de composites Carbone/Epoxy par impédancemétrie électrique. Proceedings of JNC 18 2013
[ACT56]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Étude expérimentale de l’endommagement d’un composite tissé mince sous traction quasi-statique via thermographie infrarouge. Proceedings of JNC 18 2013
[ACT57]J.-C. Passieux, L.A. Gomes Perini, E. De Luycker and J.-N. Périé. PGD et mesure de champs par corrélation d’images. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT58]M. Dauphin, S. Albin, C. Roucoules, Y. Le Maoult, M. El Hafi and F. Schmidt. Modélisation des échanges radiatifs dans un système d’éclairage automobile par la méthode de Monte-Carlo. Proceedings of SFT 2013
[ACT59]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures. Proceedings of International Conference of Nonconventional Technologies 2013
[ACT60]J. Crevel, M.-L. Pastor, F. Berthet and F. Lachaud. Étude de l’influence des paramètres d'injection sur le comportement de PEEK renforcé de fibres de carbone par thermographie infrarouge. Proceedings of JNC 18 2013
[ACT61]J. Crevel, F. Lachaud, F. Berthet and M.-L. Pastor. From Microstructure Characterization to Multi-Scale Modelling of Injected Carbon Fibre Reinforced PEEK. Proceedings of 19th International Conference on composite materials 2013
[ACT62]C. David, L. Robert, J.-C. Passieux and J.-N. Périé. Local/Global FEMU identification of mechanical parameters. Proceedings of The 2nd International Symposium on Experimental Mechanics (Tapei, Taiwan) 2012
[ACT63]B. Karabagli, J.-J. Orteu and T. Simon. Automatic verification of machining setups using computer vision. Proceedings of Joint International Conference of ISEM-ACEM-SEM-7th ISEM'12, Taipei (Taiwan), 8-11 November 2012 2012
[ACT64]P. Marguerès, T. Camps and P. Olivier. Impédancemétrie électrique pour le monitoring de composites Carbone/Epoxy. Proceedings of Journée Scientifique et Technique (JST) AMAC "Smart Material : intégration de fonctions et comportement mécanique des multi-matériaux" ,Laval, France 2012
[ACT65]E. Péronnet, M.-L. Pastor, R. Huillery, O. Dalverny, S. Mistou and H. Welleman. Non destructive investigation of defects in composite structures by three infrared thermographic techniques. Proceedings of ICEM15 2012
[ACT66]M. Bornert, P. Doumalin, J.-C. Dupré, C. Poilâne, L. Robert, E. Toussaint and B. Wattrisse. Short remarks about synthetic image generation in the context of the assessment of sub-pixel accuracy of Digital Image Correlation. Proceedings of 15th International Conference on Experimental Mechanics (ICEM'15), Porto, Portugal, 22-27 Juillet 2012
[ACT67]M. Dauphin, S. Albin, M. El Hafi, Y. Le Maoult and F. Schmidt. Towards thermal model of automotive lamps. Proceedings of 11 international conference on Quantitative Infrared Thermography 2012
[ACT68]J.-C. Passieux, J.-N. Périé and L.A. Gomes Perini. A PGD approach to reduce the dimensionality of FE-based digital image correlation. Proceedings of 5th international conference on optical measurement techniques - Optimess (Antwerp, Belgium) p.293-302 2012
[ACT69]E. Péronnet, M.-L. Pastor, R. Huillery, O. Dalverny and S. Mistou . Non destructive investigation of defects in composite structures by full-field measurement methods. Proceedings of ACMA2012 2012
[ACT70]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Damage assessment of thin woven composite subjected to quasi-static tensile loading using infrared thermography. Proceedings of ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT71]J. Crevel, F. Berthet, F. Lachaud and M.-L. Pastor. EXPERIMENT AND MODELLING OF INJECTED CARBON-FIBRE-REINFORCED-PEEK BEHAVIOUR UNDER TENSILE LOADING. Proceedings of ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT72]L. Maurin, P. Ferdinand, L. Robert and J.-J. Orteu. Capteur de pression à réseaux de Bragg pour l'élaboration intelligente de pièces structurales composites - Le projet ELICo-CP. Proceedings of 12ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Lille (France), 21-25 novembre 2011
[ACT73]L. Maurin, P. Ferdinand, L. Robert and J.-J. Orteu. Development of an integrated Fiber Bragg Grating contact pressure and temperature sensor for composite smart manufacturing. Proceedings of 8th International Workshop on Structural Health Monitoring (IWSHM'2011), Stanford University, Stanford, CA (USA), 13-15 September 2011
[ACT74]B. Karabagli, T. Simon and J.-J. Orteu. Détermination automatique du seuil de binarisation des modules des gradients par modélisation de leur histogramme. Proceedings of Congrès ORASIS 2011, Praz-sur-Arly (France), 6-10 juin 2011 2011 [HAL]
[ACT75]R. Gilblas, T. Sentenac, D. Hernandez and Y. Le Maoult. Thermoreflectometry : a new system to determine the true temperature fields on surface with unknown emissivity. Proceedings of Security, Defense and Sensing, Thermosense 2011 [DOI]
[ACT76]R. Gilblas, T. Sentenac, D. Hernandez and Y. Le Maoult. La thermoréflectométrie 2D : une nouvelle méthode pour la détermination de champs de températures vraies sur des surfaces d'émissivités inconnues'. Proceedings of SFT 2011 2011
[ACT77]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. simulation de la polymèrisation par infra rouge de composites. Proceedings of SFT 2011, 24-27 mai 2011, perpignan 2011
[ACT78]H. Leclerc, J.-N. Périé, F. Hild and S. Roux. Corrélation d’images volumiques : quelles limites à la résolution spatiale. Proceedings of 10ème colloque national en calcul des structures, Giens (France) 2011 [HAL]
[ACT79]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Monitoring of Vacuum Assisted Resin Transfer Moulding (VARTM) process with superimposed Fiber-Bragg-Gratings. Proceedings of SPIE Vol. 7753, 77538W, 21th International Conference on Optical Fibre Sensors, 15 - 19 May 2011, Ottawa, Canada. 2011 [DOI]
[ACT80]Y. Balcaen, V. Vidal, V. Velay, L. Robert, F. Pettinari-strumel, J. Douin and P. Lours. Comparative Study, in pure titanium sheet, of the microstructural evolution induced by incremental forming process and plane strain tensile tests. Proceedings of Proceedings of the 12th World Congresss on Titanium Beijing China 2011
[ACT81]V. Vidal, Y. Balcaen, F. Pettinar-strumel, J. Douin, P. Lours, V. Velay and L. Robert. Experimental study of the deformation mechanisms in textured pure alpha-titanium sheets. Proceedings of Proceedings of the 12th World Congresss on Titanium Beijing China 2011
[ACT82]F. Berthet, S. Nakouzi, F. Schmidt and Y. Le Maoult. Cartes de température maximum lors de la simulation de la réticulation de la résine RTM 6 dans une plaque composite. Proceedings of JNC 17 (Journées nationales des composites) 2011 [HAL]
[ACT83]S. Nakouzi, F. Schmidt, Y. Le Maoult, F. Berthet and J. Pancrace. Infrared curing simulations of liquid composites molding. Proceedings of 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS p.1125-1130 2011 [DOI]
[ACT84]C. Garnier, M.-L. Pastor and B. Lorrain. Finite element model for impact on composite structures. Proceedings of ICCS16 2011
[ACT85]L. Pin, F. Ansart, J.-P. Bonino, Y. Le Maoult, V. Vidal and P. Lours. Processing, repairing and cyclic oxidation behaviour of sol gel thermal barrier coatings. Proceedings of ICMCTF - 38th International Conference on Metallurgical Coatings and Thin Films - San Diego USA 2011 [DOI]
[ACT86]T. Ben M'Barek, L. Robert, F. Hugot and J.-J. Orteu. Effect of carbon chain graft and additive on wood fiber/HDPE composite behavior. Proceedings of 3rd International Conference on Recent Advances in Composite Materials (ICRACM'2010), Limoges (France), 13-15 December 2010
[ACT87]A. Delmas, J.-M. Buchlin, Y. Le maoult, T. Sentenac and J.-J. Orteu. Mesure de température et de déformation à hautes températures par caméra proche IR et/ou IR : problème de l'effet mirage. Proceedings of 11ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Toulouse-Labège (France), 15-19 novembre 2010 2010
[ACT88]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Capteur à fibre optique pour le suivi de la réticulation d'une résine époxy. Proceedings of 29èmes Journées Nationales d'Optique Guidée (JNOG), Besançon, France 2010
[ACT89]R. Gras, H. Leclerc, S. Roux, J.-N. Périé and S. Otin. A suited mesh for identification of macroscopic elastic parameters of a coarse microstructure of a 3D woven composite from digital image correlation . Proceedings of 10th Texcomp International Conference on Textile Composites, Lille (France) p.143-147 2010
[ACT90]A. Delmas, Y. Le maoult, J.-M. Buchlin, T. Sentenac and J.-J. Orteu. Shape and temperature field distorsions induced by convective effect on hot object in the near infrared and infrared spectral band. Proceedings of Quantitative Infrared Thermography Conference (QIRT'2010), Québec (Canada), 27-30 July 2010 2010
[ACT91]T. Ben M'Barek, L. Robert, F. Hugot, J.-J. Orteu, H. Sammouda, A. Graciaa and B. Charrier. Study of Wood Plastic Composites elastic behaviour using full field measurements. Proceedings of 14th International Conference on Experimental Mechanics (ICEM'14), Poitiers (France), 4-9 July 2010 [DOI]
[ACT92]B. Ducarouge, T. Sentenac, F. Bugarin and M. Devy. A Global Projective Rectification Approach for Uncalibrated Infrared Stereo Images. Proceedings of Fifth International Symposium on 3D$Data Processing, Visualization and Transmission (3DPVT 2010) 2010
[ACT93]A. Delmas, Y. Le maoult, J.-M. Buchlin, T. Sentenac and J.-J. Orteu. Mesure de température et/ou de déformation à chaud par caméra proche infrarouge. Proceedings of Congrès national de la Société Française de Thermique (SFT'2010), Le Touquet (France), 25-28 mai 2010 2010
[ACT94]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. Proceedings of ESAFORM CONFERENCE 7-9 april 2010 brescia italy 2010
[ACT95]M. Bordival, B. Cosson, Y. Le Maoult and F. Schmidt. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. Proceedings of 13th ESAFORM CONFERENCE ON MATERIAL FORMING 2010
[ACT96]F. Bugarin, D. Henrion, T. Sentenac, J.-B. Lasserre and J.-J. Orteu. Optimisation globale polynomiale appliquée à la rectification projective d'images non calibrées. Proceedings of 17ème Congrès Reconnaissance des Formes et Intelligence Artificielle (RFIA'2010), Caen (France), 19-22 janvier 2010 2010 [HAL]
[ACT97]B. Ducrouge, T. Sentenac and M. Devy. Modélisation d'un objet 3D à partir d'images stéréo infrarouges avec calibrage sur images rectifiées. Proceedings of econnaissance des Formes et Intelligence Artificielle (RFIA 2010), Caen (France), 19-22 Janvier 2010, p.9 2010
[ACT98]J. Sniezewski, Y. Le Maoult, P. Lours, L. Pin, V. Minvie Bekale, D. Monceau, D. Oquab, J. Fenech, F. Ansart and J.-P. Bonino. Sol-gel thermal barrier coatings : optimization of the manufacturing route and durability under cyclic oxidation. Proceedings of 37th International Conference on Metallurgical Coatings & Thin films, ICMCTF 2010 San Diego (USA), April 2010 2010
[ACT99]L. Pin, F. Ansart, J. Fenech, P. Lours, J.-P. Bonino, J. Sniezewski and Y. Le Maoult. Advances in the field of new smart thermal barrier coatings . Proceedings of CIMTECH Venezzia 2010 2010
[ACT100]R. Gilblas, T. Sentenac, D. Hernandez and Y. Le Maoult. New approach on determination of emissivity fields using bicolor reflectometry technique'. Proceedings of QIRT 2010 2010
[ACT101]J. Pancrace, P. Lamesle, E. Rodier, F. Schmidt, Y. Le Maoult and F. Berthet. 2209 - Evolution de la microstructure et influence de la pollution atmosphérique lors de la mise en oeuvre d'une résine thermodurcissable . Proceedings of Matériaux 2010 p.9p 2010
[ACT102]C. Garnier, B. Lorrain and M.-L. Pastor. Impact damage evolution under fatigue loading by InfraRed Thermography on composite structures. Proceedings of ICEM14 (International Conference on Experimental Mechanics) 2010
[ACT103]J. Rossignol, M.-L. Pastor and A. Thionnet. Détection d’endommagement dans les composites à l’aide d’une technologie utilisant des micro-ondes et par thermographie infrarouge. Proceedings of Matériaux 2010 2010
[ACT104]E. Péronnet, F. Eyma, M.-L. Pastor and H. Welemane. Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. Proceedings of CMOI (Contrôle et Mesures Optiques pour l’Industrie) 2010
[ACT105]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Liquid Resin Infusion process monitoring with embedded superimposed long period and short period Bragg grating sensor. Proceedings of 14th International Conference on Experimental Mechanics (ICEM'14), Poitiers (France), 4-9 July 2010 [DOI]
[ACT106]N. Decultot, L. Robert, V. Velay and G. Bernhart. Single point incremental sheet forming investigated by in-process 3D digital image correlation. Proceedings of 14th International Conference on Experimental Mechanics (ICEM'14), Poitiers (France), 4-9 July 2010 p.1151-1154 2010 [DOI]
[ACT107]J.-C. Dupré, M. Bornert, L. Robert and B. Wattrisse. Digital image correlation: displacement accuracy estimation. Proceedings of 14th International Conference on Experimental Mechanics (ICEM'14), Poitiers (France), 4-9 July 2010 [DOI]
[ACT108]L. Pin, F. Ansart, P. Lours, J. Sniezewski, J. Fenech, J.-P. Bonino and Y. Le Maoult. Caractérisation du comportement en oxydation cyclique de barrières thermiques élaborées par voie sol-gel. Proceedings of Matériaux 2010 - Nantes, FRANCE 2010
[ACT109]J. Sniezewski, Y. Le Maoult, P. Lours, L. Pin, V. Minvie Bekale, D. Monceau, D. Oquab, J. Fenech, F. Ansart and J.-P. Bonino. Sol-gel thermal barrier coatings : optimization of the manufacturing route and durability under cyclic oxidation. Proceedings of ICMCTF 2010 - 37th International Conference on Metallurgical Coatings and Thin Films - San Diego, USA 2010 [DOI]
[ACT110]H. Leclerc, J.-N. Périé, A. Fanget, E. Maire, F. Hild and S. Roux. Microstructure-aided Digital Volume Correlation. Proceedings of Icem 14 – 14th International Conference On Experimental Mechanics 2010 [DOI]
[ACT111]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, C. Ligu and C. Bosquet-galerne. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Proceedings of 10ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Reims (France), 16-20 novembre 2009 2009
[ACT112]L. Robert and B. Wattrisse. Evaluation d'erreur de mesure par corrélation d'images numériques : méthodologie et résultats. Proceedings of 19ème Congrès Français de Mécanique, Marseille (France), 24-28 août 2009
[ACT113]H. Leclerc, J.-N. Périé, F. Hild and S. Roux. Corrélation d’Images Numériques Intégrée pour l’identification de propriétés mécaniques. Proceedings of CFM 2009 - 19e Congrès Français de Mécanique, Marseille (France) 2009
[ACT114]T. Ben M'Barek, L. Robert, F. Hugot, B. Charrier, H. Sammouda, A. Graciaa and J.-J. Orteu. Utilisation d'une méthode optique sans contact pour décrire le comportement mécanique de composites bois/plastique. Proceedings of 19ème Congrès Français de Mécanique, Marseille (France), 24-28 août 2009
[ACT115]H. Leclerc, J.-N. Périé, S. Roux and F. Hild. FE-DIC for identification purposes. Proceedings of ICCM17 - 17th International Conférence on Composite Materials, Edinburgh (UK) 2009
[ACT116]L. Crouzeix, M Torres, B Douchin, J-N périé, F Collombet and H. Hernandez-moreno. Assessment of the winding pattern effects on the behaviour of filament wound pipes by using full field measurements and the equilibrium gap method. Proceedings of ICCM17 - 17th International Conférence on Composite Materials, Edinburgh (UK) 2009
[ACT117]B. Coudrin, M. Devy, L. Brèthes and J.-J. Orteu. Modélisation 3D d'objets par un capteur visuel déplacé par un opérateur. Proceedings of Congrès ORASIS 2009, Trégastel (France), 8-12 juin 2009 2009 [HAL]
[ACT118]L. Crouzeix, J.-N. Périé, M. Torres, B. Douchin, F. Collombet and H. Hernandez-moreno. Utilisation de la stéréo corrélation d’images numériques et de la méthode de l’écart à l’équilibre pour la caractérisation mécanique de tubes obtenus par enroulement filamentaire. Proceedings of JNC16 - 16èmes Journées Nationales sur les Composites, Toulouse (France). 2009 [HAL]
[ACT119]J.-N. Périé, H. Leclerc, S. Roux and F. Hild. Identification de lois d'endommagement anisotrope à partir de la corrélation d'images numériques = Identification of anisotropic damage laws using digital image correlation. Proceedings of JNC16 - 16èmes Journées Nationales sur les Composites, Toulouse (France). 2009 [HAL]
[ACT120]J. Madiouli, J. Sghaier, D. Lecomte, J.-J. Orteu, L. Robert and H. Sammouda. Non-contact measurement of the shrinkage and calculation of porosity during the drying of a banana. Proceedings of Third European Drying Conference (AFSIA'2009), Lyon (France), 14-15 May 2009
[ACT121]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification de lois d’endommagement anisotrope à partir de mesures de champs de déplacements - version orthotrope de l’ ”Equilibrium Gap Method”. Proceedings of 9ème colloque national en calcul des structures, Giens (France) p.213-218 2009
[ACT122]B. Cosson, Y. Le Maoult and F. Schmidt. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT123]J. Madiouli, J. Sghaier, D. Lecomte, J.-J. Orteu, L. Robert and H. Sammouda. Mesure du retrait au cours du séchage par une méthode non destructive : la stéréovision. Proceedings of 14èmes Journées Internationales de Thermique (JITH'2009), Djerba (Tunisie), 27-29 mars 2009
[ACT124]M.-L. Pastor, C. Pescay and C. Garnier. Comparison of two Nondestructive Tests in Carbon/Epoxy Composites. Proceedings of ICCM17 (International Conference on Composite Materials) 2009
[ACT125]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Superimposed long period and short period Bragg grating sensor for LRI monitoring. Proceedings of SPIE 7503, 75035L, 20th International Conference on Optical Fibre Sensors, Edinburgh, UK, 5-9 October 2009 [DOI]
[ACT126]J. Sniezewski, V. Vidal, P. Lours and Y. Le Maoult. Thermal barrier coatings adherence and spallation : interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient. Proceedings of ICMCTF 2009 - 36th International Conference on Metallurgical Coatings and Thin Films - San Diego USA 2009 [DOI]
[ACT127]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. train and temperature measurements based on superimposed Long and Short Period Fiber Bragg Grating sensors. Proceedings of Photonics 2008 International conference on fiber optics and photonics, New Dehli, India, december 2008
[ACT128]A. Benoit, B. Gillet, J.-N. Périé, S. Bergonnier, S. Roux, F. Hild, D. Mitton and G. Guillot. Monitoring of trabecular bone deformation under stress by micro-MRI. Proceedings of 25th Annual Meeting of the European Society for Magnetic Resonance in Medicine and Biology (ESMRMB 2008), Valencia (Spain) 2008
[ACT129]J.-N. Périé, S. Roux and F. Hild. Identification of a damage law for a 2,5D woven C/C composite using displacement fields. Proceedings of Texcomp9 - 9th International Conference on Textile Composites, Newark, (Delaware, USA) p.488-496 2008
[ACT130]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. hrough-the-thickness material properties identification using 3D-DIC and FBG measurements. Proceedings of 13th European Conference on Composite Materials (ECCM13), Stockholm, Sweden, June 2008
[ACT131]M. Fazzini, L. Robert, S. Mistou and O. Dalverny. Study of image characteristics on Digital Image Correlation error assessment. Proceedings of SEM XI International Congress and Exposition on Experimental and Applied Mechanics, Orlando, Florida, USA, June 2008
[ACT132]J.-N. Périé, S. Roux and F. Hild. From digital image correlation to damage law identification. Proceedings of ICIPE 2008, 6th International Conference on Inverse Problems in Engineering: Theory and Practice, Dourdan (France) 2008 [DOI]
[ACT133]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, P. Barbeau and G. Marin. Inspection of aeronautics parts for shape defect detection using a multi-camera system. Proceedings of SEM XI International Congress on Experimental and Applied Mechanics, Orlando, Florida (USA), 2-5 June 2008 2008
[ACT134]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, P. Barbeau and G. Marin. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Proceedings of Journées COFREND 2008, Toulouse-Labège (France), 20-22 mai 2008 2008
[ACT135]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles”, . Proceedings of 11th ESAFORM CONFERENCE ON MATERIAL FORMING 2008
[ACT136]N. Decultot, V. Velay, L. Robert, G. Bernhart and E. Massoni. Behaviour modelling of aluminium alloy sheet for single point incremental forming. Proceedings of 11th Esaform Conference On Material Forming, Lyon (france) p.1151-1154 2008 [DOI]
[ACT137]N. Decultot, G. Bernhart, L. Robert, V. Velay and E. Massoni. Etude du comportement de tôle d’aluminium embouties par formage incrémental. Proceedings of Colloque MECAMAT 2008, Aussois, France, Janvier 2008
[ACT138]J. Sniezewski, Y. Le Maoult and P. Lours. In situ thermal gradient controlled investigation of spallation – Experimental design and preliminary results. Proceedings of 7th International Conference on High Temperature Corrosion and Protection of Materials, Les Embiez, France, May 2008 2008
[ACT139]M. Brinet, A. Barrau, O. Bourrion, J. Bouvier, B. Boyer, M. Buenerd, L. Derome, L. Eraud, R. Foglio, L. Gallin-martel, A. Putze, Y. Sallaz-damaz, J.-P. Scordilis, P. Bhoyar, O. Ganel, J.H. Han, C.H. Kim, M.H. Lee, L. Lutz, A. Malinine, E.S. Seo, P. Walpole, Y.S. Yoon, S.Y. Zinn, R. Bazer-bachi, J.-N. Périé and A. Menchaca-rocha. CHERCAM:. a Cherenkov imager for the CREAM experiment. Proceedings of 10th International Conference on Advanced Technology and Particle Physics p.148-153 2007 [DOI]
[ACT140]J.L. Boizard, M. Devy, P. Fillatreau, J.Y. Fourniols, P. Lacroix, N. Nasreddine and T. Sentenac. Real-time stereovision by an integrated sensor. Proceedings of 6th IFAC Symposium on Intelligent Autonomous Vehicles (IAV 2007) p.161-167 2007 [DOI]
[ACT141]Y. Le Maoult, T. Sentenac, J.-J. Orteu and J.-P. Arcens. Détection d'incendie: une nouvelle approche basée sur une caméra CCD bas-coût opérant dans le Proche Infrarouge. Proceedings of 13èmes Journées Internationales de Thermique (JITH'2007), Albi (France), 28-30 août 2007 2007 [HAL]
[ACT142]L. Robert, S. Hmida-maamar, V. Velay and F. Schmidt. Determination of the elongational properties of polymers using a mixed numerical-experimental method. Proceedings of International Conference on Experimental Mechanics (ICEM'13), Alexandroupolis, Greece p.667-668 2007 [DOI]
[ACT143]M. Demirel, L. Robert, J. Molimard, A. Vautrin and J.-J. Orteu. Strain and temperature discrimination and measurement using superimposed fiber Bragg grating sensor. Proceedings of International Conference on Experimental Mechanics (ICEM'13), Alexandroupolis, Greece, 1-6 July, p.639-640 2007 [DOI]
[ACT144]P. Olivier, B. Mascaro, P. Marguerès and F. Collombet. Cfrp with voids: ultrasonic characterization of localized porosity, acceptance criteria and mechanical characteristics. Proceedings of ICCM16-16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Kyoto, Japan 2007
[ACT145]L. Robert and J.J. Orteu. Estimation of Digital Image Correlation (DIC) Performances. Proceedings of 13th International Conference on Experimental Mechanics (ICEM'13), Alexandroupolis (Greece), 1-6 July, p.347-348 2007 [DOI]
[ACT146]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Identification de propriétés matériau sur éprouvette technologique par croisement des mesures par stéréo-corrélation d’images numériques et réseaux de Bragg avec le modèle numérique associé. Proceedings of 15èmes Journées Nationales sur les Composites (JNC'15), Marseille (France), 6-8 juin 2007
[ACT147]J.-J. Orteu. Digital Image Correlation (DIC) Error Assessment. Proceedings of SEM 2007 Conference on Experimental and Applied Mechanics, Springfield, Massachusetts (USA), 4-6 June 2007 2007
[ACT148]M. Demirel, L. Robert, J. Molimard, J.-J. Orteu and A. Vautrin. Mesure de gradients de déformations au sein de matériaux composites par capteur à fibre optique à réseau de Bragg. Proceedings of 15èmes Journées Nationales sur les Composites (JNC'15), Marseille (France), 6-8 juin 2007 [HAL]
[ACT149]M. Bordival, F. Schmidt, Y. Le Maoult and V. Velay. Simulation of the two stages Stretch-Blow Molding Process. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT150]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Caractérisation d’un matériau HexMC : identification de propriétés mécaniques par l’utilisation de mesures de champs de déplacements et de mesures ultrasonores. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.725-732 2007
[ACT151]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Utilisation de champs de déplacements pour l’identification de propriétés élastiques en milieux hétérogènes. Proceedings of 8ème colloque national en calcul des structures, Giens (France) p.241-247 2007
[ACT152]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Déformations à coeur et en surface sur éprouvette technologique en composite - Essai de flexion 3 et 4 points. Proceedings of 8ème Colloque National en Calcul des Structures, Giens, France, mai 2007
[ACT153]M. Bordival, F. Schmidt and Y. Le Maoult. Numerical Modelling and Optimization of Infrared Heating System for the Blow Moulding Process. Proceedings of 9th ESAFORM CONFERENCE ON MATERIAL FORMING 2007
[ACT154]V. Velay, L. Robert, F. Schmidt, S. Hmida and T. Vallet. Behaviour model identification based on inverse modeling and using optical full field measurements (offm): application on rubber and steel. Proceedings of 10th Esaform Conference On Material Forming p.33-38 2007 [DOI]
[ACT155]P. Olivier, P. Marguerès, B. Mascaro and F. Collombet. Porosités dans les stratifiés carbone/polymère : critère d’admissibilité et modélisation des propriétés mécaniques. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.73-80 2007
[ACT156]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de déformation à coeur sur éprouvette technologique durant la cuisson autoclave puis des essais de flexion 3 et 4 points. Proceedings of 1er Congrès Méditerranéen sur les Matériaux Composites (C2MC1), Béchar, Algérie, décembre 2006
[ACT157]M. Demirel, L. Robert, J. Molimard, J.-J. Orteu and A. Vautrin. Simulation par la méthode des matrices de transfert de l'effet de la biréfringence dans un capteur à réseau de Bragg fibré. Proceedings of 25èmes Journées Nationales d'Optique Guidée (JNOG'2006), Metz (France), 7-9 novembre 2006 [HAL]
[ACT158]J.-J. Orteu, D. Garcia, L. Robert and F. Bugarin. A Speckle Texture Images Generator. Proceedings of Speckle'06 International Conference, Nîmes (France), 13-15 September 2006 p.63410H.1-63410H.6 2006 [DOI]
[ACT159]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. Structural testing on a multi instrumented filament winding pipe: towards the identification of mechanical properties. Proceedings of ECCM12 - The 12th European Conference on Composite Materials, Biarritz (France) 2006
[ACT160]P. Olivier, P. Marguerès, B. Mascaro, K.E. Tarsha-kurdi and F. Collombet. Assessment of the effects of voids on some physical, mechanical and damage mechanics properties of carbon/polymeric composites.. Proceedings of ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006
[ACT161]Y. Rotrou, T. Sentenac, L. Robert and J.-J. Orteu. An Innovative Method for 3D Shape/Displacement/Strain and Temperature Measurement using a Single Sensor. Proceedings of Photomechanics 2006, Clermont-Ferrand (France), 10-12 July 2006
[ACT162]B. Mascaro, N. Dominguez, P. Marguerès and V. Gibiat. Caractérisation ultrasonore de la porosité dans les composites Carbone/Epoxy stratifiés . Proceedings of Journée Scientifique et Technique (JST) AMAC COFREND « Les Contrôles Non Destructifs pour les Matériaux Composites. Avancées, technologies et applications », Toulouse, France 2006 [DOI]
[ACT163]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. On the identification of mechanical properties using structural tests and optical methods. Proceedings of SEM 2006 – annual conference of the Society for Experimental Mechanics, St. Louis, Missouri (USA) 2006
[ACT164]M. Bordival, F. Schmidt, Y. Le Maoult and E. Coment. Measurement of Thermal Contact Resistance Between The Mold And The Polymer For The Stretch-blow Molding Process. Proceedings of 10th ESAFORM CONFERENCE ON MATERIAL FORMING 2006
[ACT165]J. Sniezewski, P. Lours and Y. Le Maoult. Etude in situ de l’écaillage des couches d’oxyde de l’alliage PM2000 . Proceedings of Actes du congrès Matériaux 2006, Dijon France, 13-17 Novembre 2006 2006
[ACT166]P. Marguerès, P. Olivier, B. Mascaro and F. Collombet. Critère d'admissibilité des porosités dans des composites carbone/époxyde. Proceedings of C2MC1-1er Congrès Méditerranéen sur Les Matériaux Composites, Béchar, Algérie 2006
[ACT167]L. Robert, F. Nazaret, H. Marzagui, T. Cutard and J.-J. Orteu. Étude du comportement endommageable de bétons réfractaires par stéréocorrélation d'images numériques. Proceedings of Congrès Français de Mécanique, Troyes (France), 29 août - 2 septembre 2005
[ACT168]M. Bordival, F. Schmidt, Y. Le Maoult and C. Champin. Optimisation of infrared heating system for thermoforming and blow molding processes. Proceedings of PPS-2005: America Regional Meeting 2005
[ACT169]Y. Rotrou, T. Sentenac, Y. Le Maoult, P. Magnan and J. Farré. Near infrared thermography with silicon FPA - Comparison to MWIR and LWIR thermography. Proceedings of 8th conference on Quantitative InfraRed Thermography (QIRT Conference 2006) - Padova Italy 2005
[ACT170]S. Andrieu, F. Schmidt, Y. Le Maoult and S. Monteix. Optimisation of Infrared Heating for the thermoforming process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING 2005
[ACT171]C. Champin, M. Bellet, F. Schmidt, J.-F. Agassant and Y. Le Maoult. 3D Finite Element Modelling of the Stretch Blow Moulding Process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING p.905-908 2005
[ACT172]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.-H. Grunevald. Instrumentations combinées (fibres optiques à réseaux de Bragg et corrélation d'images numériques) pour l’analyse multi-échelle du comportement de démonstrateurs technologiques. Proceedings of 14èmes Journées Nationales sur les Composites (JNC 14), Compiègne, France, mars 2005
[ACT173]P. Marguerès, J.-N. Périé, Julian Perez, F. Collombet and Y.-H. Grunevald. Caractérisation d'une structure composite obtenue par RFI à partir d'un nouveau matériau. Proceedings of JNC 14 - 14èmes Journées Nationales sur les Composites, Compiègne, France 2005
[ACT174]Y. Rotrou, T. Sentenac, Y. Le Maoult, P. Magnan and J. Farré. Demonstration of near-infrared thermography with silicon image sensor cameras. Proceedings of Proc. SPIE 5782, Thermosense XXVII p.9-18 2005 [DOI]
[ACT175]Y. Le Maoult, P. Lours and B. Pieraggi. In situ investigation of the spallation of oxide scales grown on ODS alloy PM2000. Proceedings of 2005
[ACT176]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI. Proceedings of Journée Scientifique et Technique (JST) "Mise en forme des matériaux composites", Le Havre, France 2004 [DOI]
[ACT177]N. Cornille, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. 3D Shape and Strain Measurements using a Scanning Electron Microscope. Proceedings of 12th International Conference on Experimental Mechanics (ICEM'12), Bari (Italy), 29 August - 2 September 2004 2004
[ACT178]S. Monteix, Y. Le Maoult and F. Schmidt. Quantitative Infrared Thermography applied to blow moulding process: measurement of a heat transfer coefficient. Proceedings of QUIRT 2004 2004
[ACT179]N. Cornille, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. Initial Experimental Results Using an ESEM for Metrology. Proceedings of SEM X International Congress on Experimental and Applied Mechanics, Costa Mesa, California (USA), 7-10 June 2004 2004
[ACT180]C. Champin, J.-F. Agassant, M. Bellet, F. Schmidt and Y. Le Maoult. 3D Finite Element Modelling of the Stretch-Blow Moulding Process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT181]S. Andrieu, F. Schmidt and Y. Le Maoult. Infrared heating modelling of thermoplastic sheet during thermoforming process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT182]M. Mulle, L. Robert, J.-N. Périé and F. Collombet. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation de métrologies. Proceedings of Colloque Photomécanique 2004, Albi, France 2004
[ACT183]L. Penazzi, D. Attaf, L. Robert, J.C. Dupré, V. Valle and J.-J. Orteu. Etude expérimentale par photoélasticimétrie de la localisation de la pression de contact d'une tôle en glissement sur un rayon de matrice d'emboutissage. Proceedings of Colloque Photomécanique 2004, Albi, France 2004
[ACT184]N. Cornille, H.W. Schreier, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. Gridless Calibration of Distorted Visual Sensors. Proceedings of Colloque Photomécanique 2004, Albi (France), 4-6 mai 2004 2004
[ACT185]N. Cornille, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. Calibrage d'un MEB en vue de la mesure précise de formes et de déformations 3D. Proceedings of Colloque Photomécanique 2004, Albi (France), 4-6 mai 2004 2004
[ACT186]S. Andrieu, F. Schmidt and Y. Le Maoult. Mesures infrarouges appliquées à la modélisation du thermoformage EMAC. Proceedings of Colloque photomécanique 2004 p.177-184 2004
[ACT187]T. Sentenac, Y. Le Maoult, G. Nsengumuremyi,, Y. Rotrou and G. Bernhart. Mesure de champs de température par caméra CCD : application au suivi thermique de moules. Proceedings of Photomécanique 2004 p.393-400 2004
[ACT188]Y. Le Maoult, P. Lours, D. Adé and B. Pieraggi. Etude dynamique de l'écaillage des oxides de l’alliage PM2000: apport d'une nouvelle technique de trajectographie vidéo. Proceedings of Actes du Colloque Photomécanique - Albi, France, Mai 2004 2004
[ACT189]N. Cornille, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. Numérisation 3D automatique d'objets observés au Microscope Électronique à Balayage (MEB). Proceedings of 4ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Belfort (France), 17-21 novembre 2003 2003
[ACT190]S. Andrieu, F. Schmidt and Y. Le Maoult. Heat conditioning modelling of thermoforming process: comparison with experiments. Proceedings of 19th International Conference of Polymer Processing Society 2003
[ACT191]N. Cornille, D. Garcia, M.A. Sutton, S.R. Mcneill and J.-J. Orteu. Automated 3-D Reconstruction Using a Scanning Electron Microscope. Proceedings of SEM 2003 Conference on Experimental and Applied Mechanics, Charlotte, North Carolina (USA), 2-4 June 2003 2003
[ACT192]D. Garcia, J.-J. Orteu and L. Penazzi. A Combined Temporal Tracking and Stereo-correlation Technique for Accurate Measurement of 3D Displacements: Application to Sheet Metal Forming. Proceedings of 9th International Metal Forming Conference, Birmingham (UK), 9-11 September 2002 2002
[ACT193]D. Garcia, J.-J. Orteu, T. Cutard and L. Robert. Application of stereovision to the mechanical characterization of refractory ceramics reinforced with metallic fibres. Proceedings of SEM 2002 Conference on Experimental and Applied Mechanics, Milwaukee, USA, 10-12 June 2002 2002
[ACT194]S. Andrieu, Y. Le Maoult and F. Schmidt. Infrared Heating Modeling of Thermoplastic Sheets in Thermoforming Process. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT195]T. Sentenac, J.-J. Orteu, Y. Le Maoult, M. Devy and G. Boucourt. Load Movement Measurement using a Near-Infrared CCD Camera for Aircraft Cargo Surveillance. Proceedings of 8th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2001), Antibes Juan-les-pins (France), 15-18 October 2001 2001
[ACT196]F. Schmidt and Y. Le Maoult. Modeling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process. Proceedings of International Conference on Advances in Materials And Processing Technologies 2001
[ACT197]D. Garcia, J.-J. Orteu and M. Devy. Calibrage précis d'un capteur de vision stéréoscopique. Proceedings of Congrès ORASIS 2001, Cahors (France), 5-8 juin 2001 2001
[ACT198]B. Riffard, B. David, C. Firmin, J.-J. Orteu and J.-G. Postaire. Computer vision systems for tuning improvement in glass bottle production: on-line gob control and crack detection. Proceedings of 5th International Conference on Quality Control by Artificial Vision (QCAV'2001), Le Creusot (France), 21-23 May 2001 2001
[ACT199]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Recent Issues In Preform Radiative Heating Modelling. Proceedings of 17th International Conference of Polymer Processing Society 2001
[ACT200]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Comparison Between a Numerical Model and an Experimental Approach of Preform Infrared Radiative Heating. Proceedings of CHT’01 (International Symposium on Advances in Computational Heat Transfer) p.1017-1024 2001
[ACT201]D. Garcia, J.-J. Orteu and M. Devy. Calibrage précis d'une caméra CCD ou d'un capteur de vision stéréoscopique. Proceedings of Colloque Photomécanique 2001, Futuroscope, Poitiers (France), 24-26 avril 2001 2001
[ACT202]S. Claudinon, P. Lamesle, J.-J. Orteu and R. Fortunier. Contribution à l'étude de la distorsion au traitement thermique : suivi continu par vision artificielle et simulation numérique par éléments finis. Proceedings of Colloque Photomécanique 2001, Futuroscope, Poitiers (France), 24-26 avril 2001 2001
[ACT203]D. Garcia, B. David, J.-J. Orteu, T. Cutard and E. Cailleux. Application de la stéréovision à l'étude du comportement de bétons renforcés de fibres métalliques. Proceedings of Colloque Photomécanique 2001, Futuroscope, Poitiers (France), 24-26 avril 2001 2001
[ACT204]D. Garcia and J.-J. Orteu. 3D Deformation Measurement using Stereo-correlation applied to Experimental Mechanics. Proceedings of 10th FIG International Symposium on Deformation Measurements, Orange, California (USA), 19-22 March 2001 2001
[ACT205]D. Garcia, J.-J. Orteu and M. Devy. Accurate Calibration of a Stereovision Sensor: Comparison of Different Approaches. Proceedings of Vision, Modeling, and Visualization 2000, Saarbrücken (Germany), 22-24 November 2000 2000
[ACT206]M. Rachik, F. Schmidt, N. Reuge, Y. Le Maoult and F. Abbé. Elastomer Biaxial Characterization, Experimental an Numerical Investigations . Proceedings of Eccomas 2000 2000
[ACT207]S. Monteix, F. Schmidt and Y. Le Maoult. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF PREFORM INFRARED RADIATIVE HEATING . Proceedings of Quantitative Infrared Thermography, QIRT’2000 2000 [DOI]
[ACT208]S. Claudinon, P. Lamesle, J.-J. Orteu and R. Fortunier. Monitoring distortions of metallic parts during heat treatment. Proceedings of 5th ASM Heat Treatment and Surface Engineering Conference in Europe, Gothenburg (Sweden), 7-9 June 2000 2000
[ACT209]F. Schmidt, S. Monteix and Y. Le Maoult. Analysis of influent parameters during infrared radiative heating of PET preform. Proceedings of 16th International Conference of Polymer Processing Society 2000
[ACT210]B. Aubé, D. Garcia and J.-J. Orteu. Un scanner 3D pour la modélisation d'objets, simple à utiliser et n'utilisant qu'une seule caméra - An easy-to-use 3D scanner for object modelling using a single camera . Proceedings of SCANNING 2000 : The Scanning European Meeting Point, Fifth Edition, Paris (France), 24-25 May 2000 2000
[ACT211]D. Garcia and J.-J. Orteu. 3D Deformation Measurement using Stereo-correlation applied to the Forming of Metal or Elastomer Sheets. Proceedings of International Workshop on Video-Controlled Materials Testing and In-Situ Microstructural Characterization, Nancy (France), 16-18 November 1999 1999
[ACT212]N. Roustit, D. Garcia, J.-J. Orteu and F. Rézaï-aria. Monitoring of in-plane cracking using correlation-based image processing: preliminary results . Proceedings of International Workshop on Video-Controlled Materials Testing and In-Situ Microstructural Characterization, Nancy (France), 16-18 November 1999 1999
[ACT213]D. Garcia and J.-J. Orteu. Mesure de formes et de déformations 3D par stéréo-corrélation : application sur des tôles minces embouties. Proceedings of Colloque "Nouveaux Moyens Optiques pour l'Industrie II", Mittelwihr, Alsace (France), 17-19 novembre 1999 1999
[ACT214]B. David, J.-J. Orteu and P. Mérour. Glass bottle forming control : on-line measurement of gob position and shape using computer vision . Proceedings of 2nd European Congress of Chemical Engineering -- 2ème Congrès Européen de Génie des Procédés, Montpellier (France), 5-7 October 1999 1999
[ACT215]S. Monteix, F. Schmidt, Y. Le Maoult, R. Ben Yedder, R. Diraddo and D. Laroche. Experimental Study and Numerical Simulation of Preform or Sheet Infrared Radiative Heating. Proceedings of AMPT ‘99 1999
[ACT216]P. Marguerès, F. Meraghni and M.L. Benzeggagh. Determination of Stiffness Reduction and Damage Accumulation Monitoring in Composite Materials Using Ultrasonic Techniques – Part II. Proceedings of ICCM12- 12TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS,Paris, France 1999
[ACT217]F. Schmidt, N. Reuge, Y. Le Maoult, J.-P. Arcens, B. David and F. Abbé. Inflation Technique Optimization for an Elastomer Biaxial Characterization. Proceedings of 15th International Conference of Polymer Processing Society 1999
[ACT218]P. Marguerès, F. Meraghni and M.L. Benzeggagh. Determination of stiffness reduction and damage accumulation monitoring in composite materials using ultrasonic techniques - Part I. Proceedings of Society for the Advancement of Material and Process Engineering-SAMPE, Paris, France p.513-524 1999
[ACT219]S. Baleix, Y. Le Maoult, S. Frenois, Y. Marcel, P. Lours and G. Bernhart. Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool . Proceedings of Proceedings of the 3rd international Congress on Thermal Stresses, edited by J.J. Skrzypek and R.B. Hetnarski, Cracow (Poland), 317, 1999 p.317 1999
[ACT220]Y. Le Maoult, S. Baleix, P. Lours and G. Bernhart. Application industrielle de la thermographie infrarouge au comportement des outillages de formage superplastique . Proceedings of Actes des journées du GAMI du CETIM sur les applications de la thermographie dans les industries mécaniques, Senlis (France), 22-23 juin, 1999 1999
[ACT221]S. Monteix, R. Diraddo, F. Schmidt and Y. Le Maoult. Profiled infrared radiative heating in blow moulding and thermoforming. Proceedings of PPS’98 - North American Meeting p.147-148 1998
[ACT222]S. Claudinon, R. Fortunier, P. Lamesle and J.-J. Orteu. Suivi continu par vision de la distorsion d'outils au traitement thermique. Proceedings of 37èmes Journées du Cercle d'Étude des Métaux - "les aciers pour moules et outils", Albi (France), 27-28 mai 1998 1998
[ACT223]J.-J. Orteu. Mesure de déformations 3D par stéréovision. Proceedings of Congrès Numérisation 3D 98, Paris (France), 27-28 mai 1998 1998
[ACT224]J.-J. Orteu, H. Al-haddad and S. Lacroix. Mesure de déformations 3D par stéréocorrélation. Proceedings of Colloque Photomécanique 98, Marne la Vallée (France), 14-16 avril 1998 1998
[ACT225]S. Claudinon, J.-J. Orteu, P. Lamesle and R. Fortunier. Mesure par voie optique des distorsions au traitement thermique de matériaux métalliques. Proceedings of Colloque Photomécanique 98, Marne la Vallée (France), 14-16 avril 1998 1998
[ACT226]M. Devy, V. Garric and J.-J. Orteu. Camera calibration from multiple views of a 2D object, using a global non linear minimization method. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'97), Grenoble (France), 7-11 September 1997 1997
[ACT227]Y. Le Maoult, F. Schmidt, M. El Hafi and P. Lebaudy. Measurement and Calculation of Preform Infrared Heating a first approach. Proceedings of 4th International Workshop on Advanced Infrared Technology and Applications p.321-331 1997
[ACT228]J.-J. Orteu, V. Garric and M. Devy. Camera calibration for 3D reconstruction : application to the measure of 3D deformations on sheet metal parts. Proceedings of European Symposium on Lasers, Optics and Vision in Manufacturing (EUROPTO), Munich (Germany), 16-20 June 1997 1997 [DOI]
[ACT229]V. Laborde, M. El Hafi, Y. Le Maoult and F. Schmidt. 11) V. Laborde , M. , P. Lebaudy, Y. Le Maoult, F. M. Schmidt, “Modélisation du chauffage infra rouge de préformes”. Proceedings of Société Française des Thermiciens ‘97 p. 699-706, 1997
[ACT230]S. Claudinon, P. Lamesle, J.-J. Orteu and R. Fortunier. Utilisation des éléments finis pour la prévision des déformations en traitement thermique. Proceedings of Journées franco-allemandes ATTT-AWT sur les déformations en traitement thermique, Belfort (France), 24-25 avril 1997 1997
[ACT231]J. Caron, L. Duvieubourg, J.-J. Orteu and P. Révolte. Automatic inspection system for strip of preweathered zinc. Proceedings of International Conference on Applications of Photonics Technology 1996 (ICAPT'96), Montreal (Canada), 29 July - 1 August 1996 1996
[ACT232]J. Caron, L. Duvieubourg, J.-J. Orteu and P. Révolte. Real-time inspection of pre-weathered zinc based on computer vision. Proceedings of Conference on Machine Vision Applications in Industrial Inspection 1996, San Jose, California (USA), 31 January - 1 February 1996. 1996
[ACT233]J.L. Fuentes-cantillana, J.C. Catalina, J. Artieda, M. Devy and J.-J. Orteu. Automation of a roadheader in selective cutting using computer vision - A final report. Proceedings of 3rd International Symposium on Mine Mechanization and Automation, Golden, Colorado (USA), 12-14 June 1995 1995
[ACT234]T. Baron, M. Devy, F. Huynh and J.-J. Orteu. Hand-eye calibration in unstructured environments using optical theodolites . Proceedings of 6th International Conference on Advanced Robotics (ICAR'93), Tokyo (Japan), 1-2 November 1993 1993
[ACT235]M. Devy, J.L. Fuentes-cantillana and J.-J. Orteu. Motion Planning from Perceptual Data for a Roadheader in Automatic Selective Cutting Operation . Proceedings of 24th International Symposium on Industrial Robots (ISIR'93), Tokyo (Japan), 4-6 November 1993 1993
[ACT236]J.C. Catalina, J. Artieda, A.E. Garcia, J.-J. Orteu, M. Devy and R. Manana. Recent developments on the use of computer vision as a face mapping tool. Proceedings of 2nd International Symposium on Mine Mechanization and Automation, Lulea (Sweden), June 1993 1993
[ACT237]J.-J. Orteu, M. Devy and T. Baron . Mining Robotics : 3D Perception of a Roadheader for the Automation of Cutting Operation. Proceedings of 23rd International Symposium on Industrial Robots (ISIR'92), Barcelona (Spain), 6-9 October 1992 1992
[ACT238]J.-J. Orteu, J.C. Catalina and M. Devy. Perception for a roadheader in automatic selective cutting operation. Proceedings of IEEE International Conference on Robotics and Automation, Nice (France), 10-15 May 1992 1992
[ACT239]M. Devy, J.-J. Orteu, J.L. Fuentes-cantillana, J.C. Catalina, A. Rodriguez, D. Dumahu and P. Villeneuve De Janti. Mining Robotics : Application of Computer Vision to the Automation of a Roadheader. Proceedings of 4ème Symposium International sur l'Offshore, la Robotique et l'Intelligence Artificielle (ORIA'91), Marseille (France), 11-12 décembre 1991 1991 [HAL]
[ACT240]J.C. Catalina and J.-J. Orteu. Reconocimiento automatico de minerales mediante vision artificial en una explotacion de sales potasicas. Proceedings of Segundo Congreso de la Asociacion Espanola de Robotica, Zaragoza (Spain), Noviembre 1991 1991
[ACT241]J.-J. Orteu and M. Briot. Segmentation d'images couleur pour l'automatisation de l'abattage sélectif dans une mine de potasse. Proceedings of 13ème Colloque GRETSI sur le Traitement du Signal et des Images, Juan-les-Pins (France), 16-20 septembre 1991 1991
[ACT242]J.L. Fuentes-cantillana, J.C. Catalina, J.-J. Orteu, A. Rodriguez and D. Dumahu. Use of computer vision for automation of a roadheader in selective cutting operation. Proceedings of 1st International Symposium on Mine Mechanization and Automation, Golden, Colorado (USA), 10-13 June 1991 1991 [HAL]
[ACT243]J.-J. Orteu and M. Devy. Application of computer vision to automatic selective cutting with a roadheader in a potash mine. Proceedings of 5th International Conference on Advanced Robotics (ICAR'91), Pisa (Italy), 19-22 June 1991 1991

Communication sans actes dans un congrès international ou national

[COM1]I. Jovancevic, H.-H. Pham, J.-J. Orteu, R. Gilblas, J. Harvent, X. Maurice and L. Brèthes. Détection et caractérisation de défauts par analyse des nuages de points 3D fournis par un scanner. 15ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Le Mans (France), 20-24 mars 2017. 2017
[COM2]J.-C. Passieux, J.-N. Périé and R. Bouclier. Space-time FE-DIC for vibration measurement. iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA 2016
[COM3]J.-N. Périé, J.-E. Pierré and J.-C. Passieux. Mechanically regularized Finite Element Stereo DIC: framework and application for structural testings. iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA 2016
[COM4]F. Schmidt and Y. Le Maoult. Infrared Radiation applied to Blow Molding Process. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM5]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM6]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Measurement of regularised boundary conditions on a composite plate with Stereo Digital Image Correlation. ICCS 18, Intenational Conference on Composite Structure, 15-18 June (Lisbon, Portugal) 2015
[COM7]J.-C. Passieux and J.-N. Périé. High Performance Computing in Global DIC for the analysis of large datasets. Photomechanics 2015, Delft, NL 2015
[COM8]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. A Global Formulation to Stereo Digital Image Correlation with Mechanical Regularisation. PhotoMechanics 2015, Delft, NL 2015
[COM9]I. Jovancevic, J.-J. Orteu, T. Sentenac and R. Gilblas. Automated visual inspection of an airplane exterior. Congrès de l'Ecole Doctorale Systèmes (EDSYS), Toulouse (France), 19-20 mai 2015 2015
[COM10]J.-C. Passieux and J.-N. Périé. Outils de calcul hautes performances pour la corrélation d’images volumiques éléments finis. Journées Matériaux Numériques - JMN 2015 2015
[COM11]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification de mécanismes d’endommagement de stratifiés carbone/époxy par émission acoustique. CILSA - Journées Instrumentation, traitement du signal et modélisation des sources acoustiques dans les matériaux composites 2014
[COM12]C. Bouvet, T. Lisle, M.-L. Pastor and P. Marguerès. MESURE PAR THERMOGRAPHIE INFRAROUGE DU TAUX DE RESTITUTION D'ÉNERGIE CRITIQUE DANS UN STRATIFIÉ COMPOSITE: CAS DE LA RUPTURE DE FIBRES EN COMPRESSION. CILSA – Journée Instrumentation, traitement du signal et modélisation des sources acoutisques dans les matériaux composites 2014
[COM13]J.-C. Passieux, F. Bugarin, J.-N. Périé, L. Robert and C. David. Multiscale FE digital image correlation and material parameter identification. World Congress on Computational Mechanics - WCCM XI, ECCM V, ECFD VI (Barcelona, Spain) 2014
[COM14]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. Measuring volumetric micro-scale displacements of a composite using a PGD-Based DVC. 16th International Conference on Experimental Mechanics, ICEM16 (Cambridge, UK) 2014
[COM15]E. Copin, T. Sentenac, Y. Le Maoult, F. Blas, F. Ansart and P. Lours. Feasibility of multilayer sol-­gel thermal barrier coating manufacturing for through thickness temperature gradient sensing. 41st International Conference on Metallurgical Coatings and Thin Films 2014 (ICMCTF), 27 Avril – 2 Mai 2014, San Diego (USA) 2014
[COM16]I. Viana, J.-J. Orteu and F. Bugarin. Inspection d'assemblages mécaniques aéronautiques par vision artificielle. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 22-23 mai 2014. 2014
[COM17]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. On the joint use of an opacifier and digital volume correlation to measure micro-scale volumetric displacement fields in a composite. ICTMS2013 - The 1st International Conference on Tomography of Materials and Structures, (Ghent, Belgium) 2013
[COM18]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Two-scale FEMU identification of mechanical parameters. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics 2013, Montpellier (France), 27-29 May 2013
[COM19]D. Garcia, J.-J. Orteu, L. Robert, B. Wattrisse and F. Bugarin. A Generic Synthetic Image Generator Package for the Evaluation of 3D Digital Image Correlation and Other Computer Vision-Based Measurement Techniques. Photomechanics 2013, Montpellier (France), 27-29 May 2013 [HAL]
[COM20]L. Robert and G. Dusserre. Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors. European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre 2012
[COM21]B. Karabagli, T. Simon and J.-J. Orteu. Vérification automatique de conformité des montages d'usinage par vision. Journée Thématique AIP-PRIMECA "Mesure 3D sans contact", Cachan (France), 7 juin 2012 2012
[COM22]B. Karabagli, J.-J. Orteu and T. Simon. Vision artificielle 2D/3D pour la sécurité de la machine outil UGV. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 9-10 février 2012 2012
[COM23]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 10-11 mai 2011 2011
[COM24]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Journée GDR ISIS 2011
[COM25]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Ecole de Printemps en Traitement d'Image, Martel (France), 18-22 avril 2011 2011
[COM26]Y. Balcaen, L. Robert, V. Velay, V. Vidal and P. Lours. Accurate strain analysis of Titanium sheet in single point incremental forming process by digital image correlation. Photomechanics 2011, Brussels, Belgium, february 2011
[COM27]S. Triollet, L. Robert, E. Marin and Y. Ouerdane. Fiber grating sensor design for strain and temperature measurement with optimized intrinsic discrimination: application to liquid composite molding processes monitoring. Workshop Frontier 2010, Albi, France 2010
[COM28]J.-N. Périé, H. Leclerc, F. Hild and S. Roux. Voxelwise Digital Volume Correlation. 3D-IMS2010 - 2nd Conference on 3D-Imaging of Materials and Systems, Hourtin (France) 2010
[COM29]B. Coudrin, M. Devy, J.-J. Orteu and B. Brèthes. Registration Strategies of 3D Images Acquired From a Hand-held Visual Sensor. 2nd Conference on 3D-Imaging of Materials and Systems 2010 (3D-IMS'2010), Hourtin (France), 6-10 September 2010 2010
[COM30]T. Ben M'Barek, L. Robert, F. Hugot, H. Sammouda, A. Graciaa, B. Charrier and J.-J. Orteu. Use of 3-D Digital Image Correlation to describe the mechanical behavior of Wood Plastic Composites (WPC). 10èmes journées de l'Ecole Doctorale des Sciences exactes et leurs applications, Pau (France), 15-16 juin 2010 2010
[COM31]J.-N. Périé, H. Leclerc, F. Hild and S. Roux. Voxelwise Digital Volume Correlation. W3D - 3rd International Workshop: 3D Imaging, Analysis, Modeling and Simulation of Macroscopic Properties, Fontainebleau (France) 2010
[COM32]R. Gras, H. Leclerc, J.-N. Périé, S. Otin and D. Marsal. Identification des paramètres élastiques macroscopiques d'un composite tissé 3D à partir de la corrélation d'images numériques. Aussois 2010 - Colloque National MECAMAT « Nouvelles approches en mécanique des matériaux », Aussois (France) 2010
[COM33]R. Gilblas, T. Sentenac, D. Hernandez and Y. Le Maoult. Mesure de champ de températures vraies par caméra proche infrarouge équipée d'un système de réflectométrie. SFT 2010 2010
[COM34]L. Pin, F. Ansart, J. Fenech, P. Lours, J.-P. Bonino, J. Sniezewski and Y. Le Maoult. Advances in the field of new smart thermal barrier coatings . CIMTECH Venezzia Italy 2010 2010
[COM35]F. Hild, H. Leclerc, J.-N. Périé and S. Roux. On the identification of damage laws using full-field measurements. ESMC2009 - 7th EUROMECH Solid Mechanics Conference, Lisbon (Portugal) 2009
[COM36]J.-N. Périé, F. Hild, S. Roux, D. Avon, N. Guerrero, R.A. Picon-rodriguez, M.E. Marante and J. Florez-lopez. Analysis of Beam and Frame Damage from Digital Image Correlation. Optimess 2009, Antwerpen (Belgium) 2009
[COM37]B. Coudrin, M. Devy and J.-J. Orteu. Modélisation 3D d'objets par un capteur visuel déplacé par un opérateur. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 14-15 mai 2009 2009
[COM38]M. Bordival, Y. Le Maoult and F. Schmidt. Thickness Optimisation of Inflated Preforms by Varying Infrared Heatong Coefficients. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM39]J. Sniezewski, V. Vidal, Y. Le Maoult and P. Lours. In situ and ex situ investigation of thermal barrier coating adherence and spallation. EUROCORR 2009 – The European Corrosion Congress - EFC Event n°310 - Nice, France, September 2009 2009
[COM40]F. Bugarin, N. Decultot, M. Devy, J. Harvent, J.-J. Orteu, L. Robert and V. Velay. Multi-camera computer vision for large volume inspection: (a) aeronautical parts inspection and (b) incremental forming. Large Volume Metrology Conference 2008 (LVMC'2008), Liverpool (UK), 4-5 November 2008 2008
[COM41]G. Bernhart, L. Robert and J.-J. Orteu. Mesures in-situ dans les matériaux et procédés composites à partir de Fibres Optiques à Réseau de Bragg. Colloque AquiQuebec'08, Bordeaux (France), 21-23 juillet 2008 2008
[COM42]L. Robert, N. Decultot, V. Velay, S. Ramde and G. Bernhart. Behaviour identification of aluminium sheet used in Single Point Incremental Forming by Finite Element Method Updated. Photomechanics 2008, Loughborough, UK 2008
[COM43]J. Harvent, F. Bugarin, J.-J. Orteu and M. Devy. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 22 mai 2008 2008
[COM44]L. Crouzeix, J.-N. Périé, S. Roux and F. Hild. On the use of displacement fields for identifying material heterogeneities and non linear behaviors. Journée Scientifique et Technique Européenne JST-e -Journée Scientifique et Technique Européenne :Apports des techniques de mesure de champs et des méthodes inverses d’identification en mécani 2008
[COM45]J. Sniezewski, Y. Le Maoult and P. Lours. Oxidation and spallation of FeCrAl alloys and thermal barrier coatings – In situ investigation under controlled temperature gradient. 2nd International Symposium on Aircraft Materials ACMA08, Agadir, Marocco, May 2008 2008
[COM46]J. Sniezewski, Y. Le Maoult, F. Crabos and P. Lours. Cyclic oxidation of thermal barrier coatings – In situ analysis under controlled temperature gradient. 19th AEROMAT - Annual Advanced Aerospace Materials and Processes Conference & Exhibition - Austin, Texas, USA, June 2008 2008
[COM47]G. Bernhart, T. Cutard, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Infra-red sheet heating assisted Superplastic Forming.. EuroSPF2008, 7th European Conference on Superplastic Forming, Carcassone (France) 2008 2008
[COM48]M. Bordival, Y. Le Maoult and F. Schmidt. Optimisation de l’Etape de Chauffage du Procédé de Soufflage de Bouteilles en Plastiques. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM49]S. Hmida-mamaar, F. Schmidt, L. Robert, V. Velay and L. Chevalier. Identification du Comportement de Membranes en Polymères par Analyse Inverse au cours du Procédé de Soufflage. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM50]J. Lopez Torres, P. Marguerès and F. Collombet. Etude de la fabrication d'un coin de malle par rfi. Journée Scientifique de l’ONERA- Journée Scientifique et Technique de l’AMAC "Mise en Forme des Matériaux Composites", Châtillon, France 2006
[COM51]S. Hmida-maamar, F. Schmidt, L. Robert and V. Velay. Parameters Identification using Field Measurements of Polymer Membranes during Bubble Inflation Technique. Photomechanics 2006, Clermont-Ferrand (France), 10-12 July 2006
[COM52]M.A. Sutton, N. Li, N. Cornille, J.-J. Orteu, A.P. Reynolds, X.D. Li, D. Garcia and H.W. Schreier. Metrology in an SEM: Basic Concepts and Recent Experimental Validation. SEM 2006 Conference on Experimental and Applied Mechanics, Saint Louis, Missouri (USA), 4-7 June 2006 (oral presentation only) 2006
[COM53]J.-J. Orteu and L. Robert. Caractérisation des performances métrologiques de la technique de corrélation d'images pour mesurer des champs de déplacements/déformations en mécanique expérimentale - Travaux du GDR CNRS 2519 MCIMS. Journée GDR ISIS "Image et Métrologie", ENSEIRB Bordeaux (France), 27 janvier 2006 2006
[COM54]F. Schmidt, C. Champin, Y. Le Maoult and M. Bellet. Modélisation de l’étape de chauffage IR dans les procédés de soufflage et thermoformage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM55]M. Bordival, F. Schmidt and Y. Le Maoult. Optimisation numérique des systèmes de chauffage infrarouge pour le thermoformage et l’injection-soufflage . 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM56]S. Hmida, F. Schmidt, L. Robert, V. Velay and D. Mercier. Modélisation du comportement de membranes en polymères durant le procédé de soufflage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM57]N. Cornille, J.-J. Orteu, M.A. Sutton and S.R. Mcneill. Calibrage d'un Microscope Électronique à Balayage (MEB) en vue de la mesure précise de formes et de déformations 3D. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France) 13-14 mai 2004 2004
[COM58]S. Monteix, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Thermographie Infrarouge Appliquée à la Mise en Forme des Bouteilles en P.E.T. Thermogram 2001 2001
[COM59]D. Garcia and J.-J. Orteu. Photomécanique : mesures 3D de champs de déplacements et de déformations par stéréo-corrélation d'images. Journées GDR-PRC ISIS "Numérisation et Modélisation 3D", Paris (France), 24-25 janvier 2001 2001
[COM60]S. Claudinon, P. Lamesle, J.-J. Orteu and R. Fortunier. Amélioration de la connaissance et de la prévision des distorsions d'aciers au traitement thermique. Journées d'Automne 2000 de la Société Française de Métallurgie et de Matériaux, Paris (France), 17-19 octobre 2000 2000
[COM61]D. Garcia and J.-J. Orteu. Measure of Local Deformations on Stamped Sheet Metal Parts using Stereo-correlation. International Deep Drawing Research Group (IDDRG'99) -- Meeting of the Working Groups, Birmingham (UK), 7-9 June 1999 1999
[COM62]S. Monteix, F. Schmidt, Y. Le Maoult and J.-P. Arcens. Modélisation du chauffage infra rouge de préformes en PET. IVème Colloque Franco-québécois, École Polytechnique de Montréal 1999
[COM63]J.-J. Orteu. Mesure de déformations par stéréovision. Journée technique de la Commission Emboutissage de la Société Française de Métallurgie et de Matériaux sur la "mesure de déformations sans contact", Albi (France), 28 novembre 1996 1996

Communication par poster dans un congrès international ou national

[AFF1]S. Amiel, E. Copin, T. Sentenac, Y. Le Maoult and P. Lours. Caractérisation de marqueurs de l’histoire thermique photoluminescents. Congrès Français de Thermique 2016, 31 Mai – 3 Juin 2016, Toulouse 2016
[AFF2]E. Copin, T. Sentenac, Y. Le Maoult and P. Lours. Fonctionnalisation de barrières thermiques sol-gel YSZ pour la mesure de température et le CND par fluorescence. 6e colloque de l’Institut Mines-Télécom « Matériaux : réalités et nouvelles frontières», 30-31 Mars 2016, Paris 2016
[AFF3]I. Viana, J.-J. Orteu, F. Bugarin and N. Cornille. Application of bipartite graph to the matching of geometric primitives in vision based inspection. VISUM Summer School (VISion Understanding and Machine intelligence), Porto (Portugal), 2-9 July 2015 2015
[AFF4]H. Li, M. Perrin and F. Eyma. Auscultation non destructive des ouvrages d’art en bois – Application à la mesure de l’humidité . 3èmes Journées Scientifiques du GDR 3544 Sciences du bois, Nancy, France 2014
[AFF5]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Identification des paramètres constitutifs de modèles orthotropes à partir de mesures CIN multiéchelles. JNC 18 - 18èmes Journées Nationales sur les Composites, Nantes, France 2013
[AFF6]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force gauging by digital image correlation. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics (Montpellier, Fr) 2013
[AFF7]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. A fast method for volumetric full-field displacement measurement: PGD-DVC. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics (Montpellier, Fr) 2013
[AFF8]B. Karabagli, M.F. Auclair-Fortier, T. Simon and J.-J. Orteu. Depth Estimation from a Single RGB Image : Principle and Calibration. Congrès de l'École Doctorale Systèmes (EDSYS), Tarbes (France), 16 avril 2013 2013
[AFF9]A. Delmas, J.-M. Buchlin, Y. Le Maoult, T. Sentenac and J.-J. Orteu. Shape and temperature field distorsions induced by convective effect on hot object in near infrared and infrared spectral. Photomechanics 2011, Brussels (Belgium), 7-9 February 2011 2011
[AFF10]Y. Balcaen, N. Decultot, V. Vidal, V. Velay, L. Robert and P. Lours. Etude des mécanismes de déformation en formage incrméntal. Colloque Plasticité 2010, Toulouse, France 2010
[AFF11]J. Lopez Torres, P. Marguerès and F. Collombet. Study for manufacturng a corner fitting obtained by resin film infusion process.. ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006

Ouvrage scientifique

[OS1]M.A. Sutton, J.-J. Orteu and H.W. Schreier. Image Correlation for Shape, Motion and Deformation Measurements - Basic Concepts, Theory and Applications. Ed. Springer 364p. 2009 ISBN:978-0-387-78746-6

Chapitre d'ouvrage scientifique

[OSC1]F. Schmidt and Y. Le Maoult. Infrared Radiation Applied to Polymer Processes . In book Heat Transfer in Polymer Composite Materials: Forming Processes, Chap. 13, p.385. Ed. Wiley-ISTE. 2016 ISBN:978-1-84821-761-4
[OSC2]F. Hild, J.-N. Périé and S. Roux. Evaluating Damage with Digital Image Correlation: C. Applications to Composite Materials. In book Nano to Macro Scale for Materials and Structures, p.1301-1322. Ed. Handbook of Damage Mechanics. 2014 ISBN:978-1-4614-5588-2
[OSC3]F. Amiot, J.-N. Périé and S. Roux. Equilibrium gap. In book Full-Field Measurements and Identification in Solid Mechanics, Chap. 12, p.331-362. Ed. Wiley. 2012 ISBN:978-1-84821-294-7
[OSC4]M. Bornert, F. Hild, J.-J. Orteu and S. Roux. Digital Image Correlation. In book Full-Field Measurements and Identification in Solid Mechanics, Chap. 6, p.. Ed. Wiley. 2012 ISBN:978-1-84821-294-7
[OSC5]F. Amiot, J.-N. Périé and S. Roux. Méthode de l’écart à l’équilibre. In book Mesures de champs et identification en mécanique des solides, Traité MIM - Mécanique et Ingénierie des Matériaux, Chap. 12, p.347-381. Ed. Hermès-Lavoisier. 2011 ISBN:2-7462-3112-3
[OSC6]M. Bornert, J.-J. Orteu and S. Roux. Corrélation d'images. In book Mesures de champs et identification en mécanique des solides, Traité MIM - Mécanique et Ingénierie des Matériaux, Chap. 6, p.175-208. Ed. Hermès-Lavoisier. 2011 ISBN:2-7462-3112-3 [HAL]
[OSC7]J.-J. Orteu. Mesure de formes et de déformations par stéréo-corrélation d'images : applications en mécanique expérimentale des solides. In book Méthodes et Techniques Optiques pour l'Industrie, Chap. 4, p.186-218. Ed. Société Française d'Optique. 2009 ISBN:978-2-918241-00-3
[OSC8]J.-J. Orteu. Mesure 3D de formes et de déformations par stéréovision. In book Traité Génie Mécanique - Travail des matériaux, p.BM7015. Ed. Techniques de l'Ingénieur. 2002

Ouvrage de vulgarisation (ou chapitre)

[OV1]J.-N. Périé, G. Besnard, F. Hild, H. Leclerc, J. Réthoré and S. Roux. La corrélation d'images : un outil de mécanique expérimentale - 2. Exemples d'application. Ed. Essais et Simulations. Num 109 2012
[OV2]J.-N. Périé, G. Besnard, F. Hild, H. Leclerc, J. Réthoré and S. Roux. La corrélation d’images : un outil de mécanique expérimentale. Première partie: Principes généraux. Ed. Essais & Simulations. Num 108 4p. 2011
[OV3]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation des mesures. Ed. Essais Industriels N°32 pages 10-16 2005
[OV4]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesure de champs et fibres optiques à réseaux de Bragg. Ed. Photoniques - La Revue de la Société Française d'Optique N°16 p. 39-41 2004

Direction d'ouvrage collectif

[DO1]P. Olivier, P. Marguerès and J.-J. Orteu. Contrôles non destructifs et matériaux composites : journée scientifique AMAC/COFREND. Revue des Composites et des Matériaux Avancés (RCMA). 17(2) Ed. Hermès-Lavoisier. 2007 ISBN:1169-7954
[DO2]J.-J. Orteu and D. Balageas. Photomécanique. Instrumentation, Mesure, Métrologie (I2M). 4(3-4/2004) Ed. Hermès-Lavoisier. 2005 ISBN:2-7462-1274-9
[DO3]Y. Berthaud, P. Gaborit, M. Grédiac, J.-J. Orteu, L. Robert and T. Sentenac. Photomécanique 2004. , 416p. Ed. Mines Albi. 2004 ISBN:2-9511591-3-7
[DO4]Y. Berthaud, M. Cottron, J.-C. Dupré, F. Morestin, J.-J. Orteu and V. Valle. Photomécanique 2001. , 382p. Ed. GAMAC. 2001 ISBN:2-951-636-80-6 [HAL]

Thèse de Doctorat ou HdR

[TH1]T. Sentenac. Contribution au développement de systèmes/méthodes optiques de mesure de champs thermiques et dimensionnels à des fins de surveillance. Habilitation à diriger des recherches, Université de Toulouse. 2014
[TH2]L. Robert. Caractérisation mécanique des matériaux à partir de mesures optiques. Habilitation à diriger des recherches, Université Paul Sabatier - Toulouse III. 2013 [HAL]
[TH3]J.-N. Périé. Images numériques et mécanique des matériaux composites et des tissus biologiques. Habilitation à diriger des recherches, Université Paul Sabatier. 2010
[TH4]J.-N. Périé. Méso-modélisation des mécanismes d'endommagement dans des composites carbone-carbone à texture multidirectionnelle. Thèse de doctorat, ENS de Cachan. 2000
[TH5]J.-J. Orteu. Vision artificielle pour le contrôle de procédés et la métrologie dimensionnelle. Habilitation à diriger des recherches, Université Paul Sabatier de Toulouse. 2000
[TH6]J.-J. Orteu. Application de la vision par ordinateur à l'automatisation de l'abattage dans les mines. Thèse de doctorat, Université Paul Sabatier de Toulouse. 1991

Autre publication

[AP1]I. Viana, R. Parlouar, F. Bugarin, J.-J. Orteu and L. Brèthes. Inspection automatisée d'assemblages mécaniques : vers une approche couplée vision 2D/vision 3D. Rapport de recherche Mines Albi 2013 [HAL]
[AP2]F. Bugarin, A. Bartoli, D. Henrion, J.-B. Lasserre, J.-J. Orteu and T. Sentenac. Rank-Constrained Fundamental Matrix Estimation by Polynomial Global Optimization Versus the Eight-Point Algorithm. Rapport de recherche LAAS No 12489 2012 [HAL]

Brevet

[BR1]F. Nazaret, E. Lebard, Y. Le Maoult, L. Penazzi, V. Vidal and V. Velay. Procédé de pilotage d'une machine de formage superplastique et machine correspondante. Brevet No. WO2016162642, 2016
[BR2]L. Maurin, P. Ferdinand, L. Robert, J.-J. Orteu and A. Hamasaiid. Dispositif de mesure combinée de variations de pression et de température faiblement intrusif. Brevet No.FR2959309, 2011
[BR3]B. Aubé, D. Garcia and J.-J. Orteu. Procédé de création automatique de maquette numérique à partir de couples d'images stéréoscopiques - Automatic building process of a digital model using stereoscopic image couples. Brevet No.FR2801123, 2001



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80