Production scientifique du Groupe MS2M

1305 contributions trouvées correspondantes à votre recherche.

Article de revue internationale avec comité de lecture

[ACL1]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit, I. Revel and Y. Duval. A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels. International Journal of Impact Engineering. 111, 165-176. 2018 [DOI]
[ACL2]M. Duval, A. Losinski, J.-C. Passieux and M. Salaün. Residual error based adaptive mesh refinement with the non-intrusive patch algorithm. Computer Methods in Applied Mechanics and Engineering. (In press). 2017 [DOI]
[ACL3]J. Serra, J.-E. Pierré, J.-C. Passieux, J.-N. Périé, C. Bouvet, B. Castanié and C. Petiot. Validation and Modeling of Aeronautical Composite Structures Subjected to Combined Loadings: the VERTEX Project. Part 2: Load Envelopes for the Assessment of Panels with Large Notches. Composite Structures. 180, 550-567. 2017 [DOI]
[ACL4]P. Longère. Respective/combined roles of thermal softening and dynamic recrystallization in adiabatic shear banding initiation. Mechanics of Materials. In press, . 2017 [DOI]
[ACL5]J. Serra, J.-E. Pierré, J.-C. Passieux, J.-N. Périé, C. Bouvet and B. Castanié. Validation and Modeling of Aeronautical Composite Structures Subjected to Combined Loadings: the VERTEX Project. Part 1: Experimental Setup, FE-DIC Instrumentation and Procedures. Composite Structures. 179, 224-244. 2017 [DOI]
[ACL6]D. Qiu, S. Seguy and M. Paredes. Tuned nonlinear energy sink with conical spring: design theory and sensitivity analysis. Journal of Mechanical Design - Transactions of the ASME. Accepted, . 2017
[ACL7]E. Paroissien, F. Lachaud, S. Schwartz, A. Da Veiga and P. Barrière. SIMPLIFIED STRESS ANALYSIS OF HYBRID (BOLTED/BONDED) JOINTS. International Journal of Adhesion and Adhesives. 77, 183-197. 2017 [DOI]
[ACL8]Y. Gao, P. Magaud, L. Baldas, C. Lafforgue, M. Abbas and S. Colin. Self-ordered particle trains in inertial microchannel flows. Microfluidics and Nanofluidics. 21(10)154. 2017 [DOI]
[ACL9]T. Li, D. Qiu, S. Seguy and A. Berlioz. Activation characteristic of a vibro-impact energy sink and its application to chatter control in turning. Journal of Sound and Vibration. 405, 1-18. 2017 [DOI]
[ACL10]O. Shtehin, V. Wagner, S. Seguy, Y. Landon, G. Dessein and M. Mousseigne. Stability of ball end milling on warped surface: semi-analytical and experimental analysis. International Journal of Advanced Manufacturing Technology. 89(9-12)2557-2569. 2017 [DOI]
[ACL11]O. Shtehin, S. Seguy, V. Wagner, Y. Landon, G. Dessein and M. Mousseigne. Low-frequency chatter genesis during inclined surface copy-milling with ball-end mill: experimental study. Machining Science and Technology. , Accepted. 2017
[ACL12]R. Bouclier and J.-C. Passieux. A domain coupling method for finite element digital image correlation with mechanical regularization: Application to multiscale measurements and parallel computing. International Journal for Numerical Methods in Engineering. 111(2)123-143. 2017 [DOI] [HAL]
[ACL13]P. Vocale, G.L. Morini, M. Spiga and S. Colin. Shear work contribution to convective heat transfer of dilute gases in slip flow regime. European Journal of Mechanics, B/Fluids. 64, 60-68. 2017 [DOI]
[ACL14]J.-C. Maré and J. Fu. Review on signal-by-wire and power-by-wire actuation for more electric aircraft . Chinese Journal of Aeronautics. 30(3)857-870. 2017 [DOI]
[ACL15]T. Li, S. Seguy and A. Berlioz. Optimization mechanism of targeted energy transfer with vibro-impact energy sink under periodic and transient excitation. Nonlinear Dynamics. 87(4)2415-2433. 2017 [DOI]
[ACL16]G. Tatsios, G. Lopez Quesada, M. Rojas-cárdenas, L. Baldas, S. Colin and D. Valougeorgis. Computational investigation and parametrization of the pumping effect in temperature driven flows through long tapered channels. Microfluidics and Nanofluidics. 21(5)99. 2017 [DOI]
[ACL17]R. Bouclier, J.-C. Passieux and M. Salaün. Development of a new, more regular, mortar method for the coupling of NURBS subdomains within a NURBS patch: Application to a non-intrusive local enrichment of NURBS patches. Computer Methods in Applied Mechanics and Engineering. 316(1)123-150. 2017 [DOI] [HAL]
[ACL18]T. Li, E. Gourc , S. Seguy and A. Berlioz. Dynamics of two vibro-impact nonlinear energy sinks in parallel under periodic and transient excitation. International Journal of Non-Linear Mechanics. 90, 100-110. 2017 [DOI]
[ACL19]M. Rojas-cárdenas, E. Silva, M.T. Ho, C.J. Deschamps and I. Graur. Time-dependent methodology for non-stationary mass flow rate measurements in a long micro-tube. Microfluidics and Nanofluidics. 21(86). 2017 [DOI]
[ACL20]J. Wolf, P. Longère, J.-M. Cadou and J.-P. Crété. Numerical modeling of strain localization in engineering ductile materials combining cohesive models and X-FEM. International Journal of Mechanics and Materials in Design. In press, . 2017 [DOI]
[ACL21]I. Hazyuk, M. Budinger, F. Sanchez and C. Gogu. Optimal design of computer experiments for surrogate models with dimensionless variables. Structural and Multidisciplinary Optimization. , . 2017 [DOI]
[ACL22]P. Longère. Adiabatic shear banding assisted dynamic failure: Some modeling issues. Mechanics of Materials. In press, . 2017 [DOI]
[ACL23]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Finite Element Stereo Digital Image Correlation: framework and mechanical regularization. Experimental Mechanics. 53(7)443-456. 2017 [DOI] [HAL]
[ACL24]H.L. Dorothy and P. Longère. Modelling of high strain rate Adiabatic Shear Banding induced failure: a comparison of two approaches. International Journal of Impact Engineering. In Press, . 2017 [DOI]
[ACL25]A. Chiplunkar, E. Rachelson, M. Colombo and J. Morlier. Approximate Inference in Related Multi-output Gaussian Process Regression. Lecture Notes in Computer Science. 10163, 88-103. 2017 [DOI]
[ACL26]T. Li, S. Seguy and A. Berlioz. On the dynamics around targeted energy transfer for vibro-impact nonlinear energy sink. Nonlinear Dynamics. 87(3)1453-1466. 2017 [DOI]
[ACL27]Y. Wang, C. Gogu, N. Binaud, C. Bes, R. Haftka and N. Kim. A cost driven predictive maintenance policy for structural airframe maintenance. Chinese Journal of Aeronautics. in press, . 2017 [DOI]
[ACL28]G. Pennisi, C. Stephan, E. Gourc and G. Michon. Experimental investigation and analytical description of a vibro-impact NES coupled to a single-degree-of-freedom linear oscillator harmonically forced.. Nonlinear Dynamics. , . 2017 [DOI]
[ACL29]J. Loukota, J.-C. Passieux, A. Lucchetti and G. Michon. Modeling of Nonstructural Components in the Dynamic Behavior of Aeronautical Structures. Journal of Aircraft. 54(1)85-93. 2017 [DOI] [HAL]
[ACL30]N. Murdoch, I. Avila-martinez, C. Sunday, E. Zenou, O. Cherrier, A. Cadu and Y. Gourinat. An experimental study of low-velocity impacts into granular material in reduced gravity. Monthly Notices of the Royal Astronomical Society. , . 2017 [DOI]
[ACL31]F. Sanchez, M. Budinger and I. Hazyuk. Dimensional Analysis and surrogate models for the thermal modeling of Multiphysics systems. Applied Thermal Engineering. 110, 758-771. 2017 [DOI]
[ACL32]C. Bessaguet, E. Dantras, C. Lacabanne, M. Chevalier and G. Michon. Piezoelectric and mechanical behavior of NaNbO3/PEKK lead-free nanocomposites.. Journal of Non-Crystalline Solids. 459, 83-87. 2017 [DOI]
[ACL33]M. Vellas, C. Fualdes, J. Morley, C. Dray, L. Rodriguez-manas, A. Meyer, L. Michel, Y. Rolland and Y. Gourinat. AeroAging – A new collaboration between life sciences experts & aerospace engineers. The Journal of Nutrition Health and Aging. Accepted July, . 2017
[ACL34]S. Segonds, P. Seitier, C. Bordreuil, F. Bugarin, W. Rubio and J.-M. Redonnet. An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter. Journal of Intelligent Manufacturing. online, 1-13. 2017 [DOI]
[ACL35]I. Alhossen, C. Villeneuve-faure, F. Baudoin, F. Bugarin and S. Segonds. Sensitivity analysis of the Electrostatic Force Distance Curve Using Sobol’s Method and Design of Experiments. Journal of Physics D - Applied Physics. 50(3). 2017 [DOI]
[ACL36]H. Si Hadj Mohand, A. Frezzotti, J. Brandner, C. Barrot and S. Colin. Molecular tagging velocimetry by direct phosphorescence in gas microflows: correction of Taylor dispersion. Experimental Thermal and Fluid Science. 83, 177-190. 2017 [DOI]
[ACL37]S. Dubreuil, M. Salaün, E. Rodriguez and F. Petitjean. Construction and identification of a D-Vine model applied to the probability distribution of modal parameters in structural dynamics. Mechanical Systems and Signal Processing. , . 2017 [DOI]
[ACL38]E. Piollet, D. Poquillon and G. Michon. Dynamic hysteresis modelling of entangled cross-linked fibres in shear.. Journal of Sound and Vibration. 383, 248–264. 2016 [DOI]
[ACL39]R. Bouclier, J.-C. Passieux and M. Salaün. Local enrichment of NURBS patches using a non-intrusive coupling strategy: geometric details, local refinement, inclusion, fracture. Computer Methods in Applied Mechanics and Engineering. 300, 1-26. 2016 [DOI] [HAL] [OATAO]
[ACL40]J. Fu, J.-C. Maré and Y. Fu. Modelling and simulation of flight control electromechanical actuators with special focus on model architecting, multidisciplinary effects and power flows . Chinese Journal of Aeronautics. 30(1)47-65. 2016 [DOI]
[ACL41]A. Maali, S. Colin and B. Bhushan. Slip length measurement of gas flow. Nanotechnology. 27(37)374004. 2016 [DOI]
[ACL42]S. Cafieri, F. Monies, M. Mongeau and C. Bes. Plunge milling time optimization via mixed-integer nonlinear programming. Computers and Industrial Engineering. 98, 434-445. 2016
[ACL43]S. Dubreuil, N. Bartoli, C. Gogu and T. Lefebvre. Propagation of modeling uncertainty by polynomial chaos expansion in multidisciplinary analysis. Journal of Mechanical Design - Transactions of the ASME. 138(11)111411. 2016
[ACL44]C. Sunday, N. Murdoch, O. Cherrier, S. Morales-serrano, C. Valeria-nardi, T. Janin, I. Avila-martinez, Y. Gourinat and D. Mimoun. An original facility for reduced-gravity testing : a set-up for 2 studying low-velocity collisions into granular surfaces. Review of Scientific Instruments. 87(8). 2016 [DOI]
[ACL45]F. Abevi, A. Daidié, M. Chaussumier and S. Orieux. Static Analysis of an Inverted Planetary Roller Screw Mechanism. Journal of Mechanisms and Robotics. 8(4)041020_1-14. 2016 [DOI]
[ACL46]C. Gogu, A. Chaudhuri and C. Bes. How adaptively constructed reduced order models can benefit sampling based methods for reliability analyses. International Journal of Reliability, Quality and Safety Engineering. 23(5)1650019. 2016
[ACL47]L. Bernard, G. Michon, R. El Fatmi and B. Castanié. Static and Dynamic Analysis of Bending-Torsion Coupling of CFRP Sandwich Beam. Composite Structures. 145(1)26-36. 2016 [DOI]
[ACL48]E. Silva, M. Rojas-cárdenas and C.J. Deschamps. Experimental analysis of velocity slip at the wall for gas flows of nitrogen, r134a, and r600a through a metallic microtube. International Journal of Refrigeration. 66, 121-132. 2016 [DOI]
[ACL49]P. Longère and A. Dragon. Enlarged Finite Strain Modelling Incorporating Adiabatic Shear Banding and Post-localization Micro-voiding as Shear Failure Mechanisms. International Journal of Damage Mechanics. 25(8)1142-1169. 2016 [DOI]
[ACL50]T. Li, S. Seguy and A. Berlioz. Dynamics of cubic and vibro-impact nonlinear energy sink: analytical, numerical and experimental analysis. Journal of Vibration and Acoustics, Transactions of the ASME. 138(3)031010-9. 2016 [DOI]
[ACL51]Y. Wang, N. Binaud, C. Gogu, C. Bes and J. Fu. Determination of Paris' law constants and crack length evolution via Extended and Unscented Kalman filter: An application to aircraft fuselage panels. Mechanical Systems and Signal Processing. 80(2016)262-281. 2016 [DOI]
[ACL52]J.-C. Maré. Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload. Simulation Modelling Practice and Theory. (63)58-82. 2016 [DOI]
[ACL53]K. Moussaoui, S. Segonds, W. Rubio and M. Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. , . 2016 [DOI]
[ACL54]F. Bugarin, D. Henrion and J.-B. Lasserre. Minimizing the sum of many rational functions. Mathematical Programming Computation. 8(1)83-111. 2016 [DOI]
[ACL55]M. Duval, J.-C. Passieux, M. Salaün and S. Guinard. Non-intrusive coupling: recent advances and scalable nonlinear domain decomposition. Archives of Computational Methods in Engineering. 23(1)17-38. 2016 [DOI] [HAL] [OATAO]
[ACL56]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Unstructured Finite Element-based Digital Image Correlation with enhanced management of quadrature and lens distortions. Optics and Lasers in Engineering. 77, 44-53. 2016 [DOI] [HAL]
[ACL57]V. Achard, A. Daidié, M. Paredes and C. Chirol. Cold expansion process on hard alloy holes-experimental and numerical evaluation. Mechanics and Industry. 17(3)303_1-16. 2016 [DOI]
[ACL58]F. Abevi, A. Daidié, M. Chaussumier and M. Sartor. Static Load Distribution and Axial Stiffness in a Planetary Roller Screw Mechanism. Journal of Mechanical Design - Transactions of the ASME. 138(1)012301_1-11. 2016 [DOI]
[ACL59]E. Gourc, L. Sanches, G. Michon and V. Steffen Jr.. Post-critical analysis of ground resonance phenomenon: effect of stator asymmetry. Nonlinear Dynamics. 83(1)201-215. 2016 [DOI]
[ACL60]X. Giraud, M. Budinger, X. Roboam, H. Piquet, M. Sartor and J. Faucher. Optimal design of the Integrated Modular Power Electronics Cabinet. Aerospace Science and Technology. 48, 37-52. 2016 [DOI]
[ACL61]J. Chen, S. Stefanov, L. Baldas and S. Colin. Analysis of flow induced by temperature fields in ratchet-like microchannels by Direct Monte Carlo Simulation. International Journal of Heat and Mass Transfer. 99, 672-680. 2016 [DOI]
[ACL62]V. Achard, A. Daidié, M. Paredes and C. Chirol. Optimization Of The Cold Expansion Process For Titanium Holes. Advanced Engineering Materials. , 1-13. 2016 [DOI]
[ACL63]M. Bouhlel, N. Bartoli, A. Otsmane and J. Morlier. An improved approach to estimate the hyper-parameters of the kriging model for high-dimensional problems through the Partial Least Squares method. Mathematical Problems in Engineering. 2016((2016)). 2016 [DOI]
[ACL64]O. Ksentini, B. Combes, M.S. Abbes, A. Daidié and M. Haddar. Numerical study of self-loosening of a bolted assembly under transversal load. Mechanics and Industry. 17(5)507_1-11. 2016 [DOI]
[ACL65]F. Mohd Zawawi, P. Lv , S. Prothin, J. Morlier, E. Benard and J.-M. Moschetta. Performance Enhancement of Tilt-Body Micro Air Vehicle by Use of Orthotropic Laminated Proprotors. Applied Mechanics and Materials. 819, 585-590. 2016 [DOI]
[ACL66]M. Bouhlel, N. Bartoli, A. Ostmane and J. Morlier. Improving kriging surrogates of high-dimensional design models by Partial Least Squares dimension reduction. Structural and Multidisciplinary Optimization. 53(5)935-952. 2016 [DOI] [HAL]
[ACL67]C. Pozzolini, Y. Renard and M. Salaün. Energy conservative finite element semi-discretization for vibro-impact of plates on rigid obstacles. Mathematical Modelling and Numerical Analysis. 50(6)1595-1613. 2016 [DOI]
[ACL68]M. Budinger, V. Pommier-budinger, G. Napias and A. Costa Da Silva. Ultrasonic ice protection systems: analytical and numerical models for architecture trade-off. Journal of Aircraft. Online, . 2016 [DOI]
[ACL69]L. Bennani, P. Villedieu and M. Salaün. A mixed adhesion–brittle fracture model and its application to the numerical study of ice shedding mechanisms. Engineering Fracture Mechanics. 158, 59-80. 2016 [DOI]
[ACL70]M. Charlotte. An atomistically-meaningful pseudocontinuum representation for the finite monatomic chain with harmonic nearest-neighbor interactions. International Journal of Solids and Structures. Volumes 97–98, 209–225. 2016 [DOI]
[ACL71]M. Paredes. Enhanced Formulae for Determining Both Free Length and Rate of Cylindrical Compression Springs. Journal of Mechanical Design - Transactions of the ASME. 138(2)6. 2015 [DOI]
[ACL72]F. Lachaud, C. Espinosa, L. Michel, P. Rahme and R. Piquet. Modelling strategies for predicting the residual strength of impacted composite aircraft fuselages. Applied Composite Materials. 22(6)599-621. 2015 [DOI]
[ACL73]I. Viana, J.-J. Orteu, N. Cornille and F. Bugarin. Inspection of aeronautical mechanical parts with a pan-tilt-zoom camera: an approach guided by the computer-aided design model. Journal of Electronic Imaging. 24(6)061118. 2015 [DOI] [HAL]
[ACL74]D. Cornette, B. Kerdreux, Y. Gourinat and G. Michon. Aeroelastic Tailoring of Helicopter Blades. Journal of Computational and Nonlinear Dynamics. 10(6). 2015 [DOI]
[ACL75]E. Gourc, S. Seguy, G. Michon, A. Berlioz and B.P. Mann. Quenching chatter instability in turning process with a vibro-impact nonlinear energy sink. Journal of Sound and Vibration. 355, 392-406. 2015 [DOI]
[ACL76]S. Djebali, A. Perles, S. Lemouzy, S. Segonds, W. Rubio and J.-M. Redonnet. Milling plan optimization with an emergent problem solving approach. Computers and Industrial Engineering. 87, 506-517. 2015 [DOI]
[ACL77]M. Bergoglio, D. Mari, J. Chen, H. Si Hadj Mohand, S. Colin and C. Barrot. Experimental and computational study of gas flow delivered by a rectangular microchannels leak. Measurement: Journal of the International Measurement Confederation. 73, 551-562. 2015 [DOI]
[ACL78]F. Bugarin, A. Bartoli, D. Henrion, J.-B. Lasserre, J.-J. Orteu and T. Sentenac. Rank-Constrained Fundamental Matrix Estimation by Polynomial Global Optimization Versus the Eight-Point Algorithm. Journal of Mathematical Imaging and Vision. 53(1)42-60. 2015 [DOI] [HAL]
[ACL79]M. Rojas-cárdenas, I. Graur, P. Perrier and J.G. Méolans. A new method to measure the thermal slip coefficient. International Journal of Heat and Mass Transfer. 88, 766–774. 2015 [DOI]
[ACL80]S. Djebali, S. Segonds, J.-M. Redonnet and W. Rubio. Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling. International Journal of Production Research. 55(17)5296-5309. 2015 [DOI]
[ACL81]O. Ksentini, B. Combes, M.S. Abbes, A. Daidié and M. Haddar. Simplified model to study the dynamic behaviour of a bolted joint and its self loosening. Structural Engineering and Mechanics. 55(3)639-654. 2015 [DOI]
[ACL82]I. Maillet, L. Michel, F. Souric and Y. Gourinat. Mode II fatigue delamination growth characterization of a carbon/epoxy laminate at high frequency under vibration loading. Engineering Fracture Mechanics. 149, 298-312. 2015 [DOI]
[ACL83]F. Lachaud, C. Espinosa, L. Michel, R. Piquet and P. Rahme. Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates. Applied Composite Materials. 22(4)377-403. 2015 [DOI]
[ACL84]I. Hazyuk, M. Budinger, F. Sanchez, J.-C. Maré and S. Colin. Scaling laws based metamodels for the selection of the cooling strategy of electromechanical actuators in the early design stages. Mechatronics. 29, 67-77. 2015 [DOI]
[ACL85]E. Roux and P.-O. Bouchard. On the interest of using full field measurements in ductile damage model calibration. International Journal of Solids and Structures. , . 2015 [DOI]
[ACL86]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Targeted energy transfer under harmonic forcing with a vibro-impact nonlinear energy sink : analytical and experimental developments. Journal of Vibration and Acoustics, Transactions of the ASME. 137(3)031008-7. 2015 [DOI]
[ACL87]E. Roux, P. Longère, O. Cherrier, T. Millot, D. Capdeville and J. Petit. Analysis of ASB assisted failure in a high strength steel under high loading rate. Materials and Design. 75, 149-159. 2015 [DOI]
[ACL88]J.-C. Passieux, J.-N. Périé and M. Salaün. A dual domain decomposition method for finite element digital image correlation. International Journal for Numerical Methods in Engineering. 102(10)1670-1682. 2015 [DOI] [HAL] [OATAO]
[ACL89]P. Longère, S. Bhogaraju and D. Craciun. Void collapse/growth in solid materials under overall shear loading. Mechanics Research Communications. 69, 1-7. 2015 [DOI]
[ACL90]F. Hospital, M. Budinger, A. Reysset and J.-C. Maré. Preliminary design of aerospace linear actuator housings. Aircraft Engineering and Aerospace Technology. 87(3)224-237. 2015 [DOI]
[ACL91]G. Lélias, E. Paroissien, F. Lachaud, J. Morlier, S. Schwartz and C. Gavoille. An extended semi-analytical formulation for fast and reliable mode I/II stress analysis of adhesively bonded joints. International Journal of Solids and Structures. 62, 18-38. 2015 [DOI]
[ACL92]L. Jaeger, S. Segonds and C. Bes. Methodology Based on Multiagent for Solving Multidisciplinary Optimization Problem Under Uncertainty. Journal of Aerospace Information Systems. 12(2)290-298. 2015 [DOI]
[ACL93]D. Carponcin, E. Dantras, G. Michon, J. Dandurand, G. Aridon, F. Levallois, L. Cadiergues and C. Lacabanne. New hybrid polymer nanocomposites for passive vibration damping by incorporation of carbon nanotubes and lead zirconate titanate particles.. Journal of Non-Crystalline Solids. 409, 20-26. 2015 [DOI]
[ACL94]P. Longère and A. Dragon. Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues. Mechanics of Materials. 80, 203-218. 2015 [DOI]
[ACL95]J.-C. Passieux, F. Bugarin, C. David, J.-N. Périé and L. Robert. Multiscale displacement field measurement using digital image correlation: Application to the identification of elastic properties. Experimental Mechanics. 55(1)121-137. 2015 [DOI] [HAL]
[ACL96]M. Salaün and S. Salmon. Low-order finite element method for the well-posed bidimensional Stokes problem. IMA Journal of Numerical Analysis. 35(1)427-453. 2015 [DOI] [OATAO]
[ACL97]C. Gogu. Improving the efficiency of large scale topology optimization through on-the-fly reduced order model construction. International Journal for Numerical Methods in Engineering. 101(4)281-304. 2015 [DOI]
[ACL98]F. Samouda, S. Colin, C. Barrot, L. Baldas and J.J. Brandner. Micro molecular tagging velocimetry for analysis of gas flows in mini and micro systems. Microsystem Technologies. 21(3)527-537. 2015 [DOI]
[ACL99]A. Frezzotti, H. Si Hadj Mohand, C. Barrot and S. Colin. Role of diffusion on molecular tagging velocimetry technique for rarefied gas flow analysis. Microfluidics and Nanofluidics. 19(6)1335-1348. 2015 [DOI]
[ACL100]A. Reysset, M. Budinger and J.-C. Maré. Computer-aided definition of sizing procedures and optimization problems of mechatronic systems. Concurrent Engineering Research and Applications. 23(4)320-332 . 2015 [DOI]
[ACL101]J. Le Dref, Y. Landon, G. Dessein and C. Espinosa. Modelling kinematics and cutting forces in vibration assisted drilling. Mechanics and Industry. accepted (september 2015). 2015
[ACL102]M. Abbas, P. Magaud, Y. Gao and S. Geoffroy. Migration of finite sized particles in a laminar square channel flow from low to high Reynolds numbers. Physics Of Fluids. 26, 123301. 2014 [DOI]
[ACL103]J. Chen, L. Baldas and S. Colin. Numerical study of thermal creep flow between two ratchet surfaces. Vacuum. 109, 294–301. 2014 [DOI]
[ACL104]J.-C. Passieux, P. Navarro, J.-N. Périé, S. Marguet and J.-F. Ferrero. A digital image correlation method for tracking planar motions of rigid spheres: application to medium velocity impacts. Experimental Mechanics. 54(8)1453-1466. 2014 [DOI] [HAL]
[ACL105]M. Budinger, J.-C. Passieux, C. Gogu and A. Fraj. Scaling-law-based metamodels for the sizing of mechatronic systems. Mechatronics. 24(7)775–787. 2014 [DOI] [HAL]
[ACL106]L. Sanches, G. Michon, A. Berlioz and D. Alazard. Response and instability prediction of helicopter dynamics on the ground.. International Journal of Non-Linear Mechanics. 65, 213-225. 2014 [DOI]
[ACL107]X. Wang, V. Budinger and Y. Gourinat. Simultaneous compensation of hysteresis and creep in a piezoelectric actuator by open-loop control for space active optics applications. Control Engineering Practice. Accepted 2014(2014)48-62. 2014 [DOI]
[ACL108]J.-C. Maré. Friction modelling and simulation at system level - Considerations to load and temperature effects. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 229(1)27-48. 2014 [DOI]
[ACL109]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. A multigrid PGD-based algorithm for volumetric displacement fields measurements. Strain. 50(4)355-367. 2014 [DOI] [HAL]
[ACL110]S. Seguy, L. Arnaud and T. Insperger. Chatter in interrupted turning with geometrical defects : An industial case study. International Journal of Advanced Manufacturing Technology. 75(1)45-56. 2014 [DOI]
[ACL111]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures. 113, 369-381. 2014 [DOI]
[ACL112]M. Paredes, R. Canivenc and M. Sartor. Tolerance optimization by modification of Taguchi's robust design approach and considering performance levels: Application to the design of a cold-expanded bushing. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 228(8)1314-1323 . 2014 [DOI]
[ACL113]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Experimental investigation and design optimization of targeted energy transfer under periodic forcing. Journal of Vibration and Acoustics, Transactions of the ASME. 136(2)021021-8. 2014 [DOI]
[ACL114]J. Astoul, E. Mermoz, M. Sartor, J.-M. Linares and A. Bernard. New methodology to reduce the transmission error of the spiral bevel gears. CIRP Annals - Manufacturing Technology. 63, 165-168. 2014 [DOI]
[ACL115]J.-P. Crété, P. Longère and J.-M. Cadou. Numerical modelling of crack propagation in ductile materials combining the GTN model and X-FEM. Computer Methods in Applied Mechanics and Engineering. 275, 204-233. 2014 [DOI]
[ACL116]T. Benhaddou, C. Chirol, A. Daidié, J. Guillot, P. Stephan and J.-B. Tuery. Pre-tensioning effect on fatigue life of bolted shear joints. Aerospace Science and Technology. 36, 36-43. 2014 [DOI]
[ACL117]J.-S. Brest, V. Keryvin, P. Longère and Y. Yokoyama. Insight into plasticity mechanisms in metallic glasses by means of a Brazilian test and numerical simulation. Journal of Alloys and Compounds. 586, S236-S241. 2014 [DOI]
[ACL118]A. Jhinaoui, L. Mevel and J. Morlier. A new SSI algorithm for LPTV systems: Application to a hinged-bladed helicopter. Mechanical Systems and Signal Processing. 42(1-2)152-166. 2014 [DOI]
[ACL119]S. Foucaud, G. Michon, Y. Gourinat, A. Pelat and F. Gautier. Artificial cochlea and acoustic black hole traveling waves observation : model and experimental results.. Journal of Sound and Vibration. 333, 3428-3439. 2014 [DOI]
[ACL120]I. Hazyuk, C. Ghiaus and D. Penhouet. Model Predictive Control of thermal comfort as a benchmark for controller performance. Automation in Construction. 43, 98–109. 2014 [DOI]
[ACL121]V. Pommier-Budinger and M. Budinger. Sizing optimization of piezoelectric smart structures with meta-modeling techniques for dynamic applications. International Journal of Applied Electromagnetics and Mechanics. 46, 1. 2014 [DOI] [HAL]
[ACL122]V. Leontidis, J. Chen, L. Baldas and S. Colin. Numerical design of a Knudsen pump with curved channels operating in the slip flow regime. Heat and Mass Transfer. 50(8)1065-1080. 2014 [DOI]
[ACL123]L. Bennani, P. Villedieu, M. Salaün and P. Trontin. Numerical simulation and modeling of ice shedding: Process initiation. Computers and Structures. 142, 15-27. 2014 [DOI] [OATAO]
[ACL124]S. Dubreuil, M. Berveiller, F. Petitjean and M. Salaün. Construction of bootstrap confidence intervals on sensitivity indices computed by polynomial chaos expansion. Reliability Engineering and System Safety. 121, 263-275. 2014 [DOI] [OATAO]
[ACL125]J. Morlier, H. Niemann and A. Shahdin. Topology optimization for robust damage localization using aggregated FRFs statistical criteria. Applied Mechanics and Materials. 629, 513-518. 2014 [DOI]
[ACL126]L. Barrière, S. Marguet, B. Castanié, P. Cresta and J.-C. Passieux. An adaptive model reduction strategy for post-buckling analysis of stiffened structures. Thin-Walled Structures. 73, 81-93. 2013 [DOI] [HAL]
[ACL127]P. Longère, A.-G. Geffroy-Grèze, B. Leblé and A. Dragon. Ship structure steel plate failure under near-field air-blast loading: numerical simulations vs experiment. International Journal of Impact Engineering. 62, 88-98. 2013 [DOI]
[ACL128]J.-C. Passieux, J. Réthoré, A. Gravouil and M.-C. Baietto. Local/global non-intrusive crack propagation simulation using a multigrid X-FEM solver. Computational Mechanics. 52(6)1381-1393. 2013 [DOI] [HAL]
[ACL129]L. Wang and J.-C. Maré. A Force Equalization Controller for Active/Active Redundant Actuation System Involving Servo-hydraulic and Electro-mechanical Technologies. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. , . 2013 [DOI]
[ACL130]O. Cherrier, P. Selva, V. Pommier-budinger, F. Lachaud and J. Morlier. Damage localization map using electromechanical impedance spectrums and inverse distance weighting interpolation: Experimental validation on thin composite structures. Structural Health Monitoring. 12(4)311-324. 2013 [DOI]
[ACL131]M. Paredes. Analytical and Experimental Study of Conical Telescoping Springs With Nonconstant Pitch. Journal of Mechanical Design - Transactions of the ASME. 135(9)094502. 2013 [DOI]
[ACL132]C. Gogu and J.-C. Passieux. Efficient surrogate construction by combining response surface methodology and reduced order modeling. Structural and Multidisciplinary Optimization. 47(6)821-837. 2013 [DOI] [HAL]
[ACL133]C. Gogu, W. Yin, R.T. Haftka, P.G. Ifju, J. Molimard, R. Le Riche and A. Vautrin. Bayesian Identification of Elastic Constants in Multi-Directional Laminate from Moiré Interferometry Displacement Fields. Experimental Mechanics. 53(4)635-648. 2013 [DOI]
[ACL134]J.-M. Redonnet, S. Djebali, S. Segonds, J. Senatore and W. Rubio. Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter. CAD Computer Aided Design. 45(6)951–962. 2013 [DOI]
[ACL135]P. Selva, O. Cherrier, V. Budinger, F. Lachaud and J. Morlier. Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks. Engineering Structures. 56, 794–804. 2013 [DOI]
[ACL136]E. Gourc, S. Seguy, G. Michon and A. Berlioz. Chatter control in turning process with a nonlinear energy sink. Advanced Materials Research. 698, 89-98. 2013 [DOI]
[ACL137]L. Jaeger, C. Gogu, S. Segonds and C. Bes. Aircraft Multidisciplinary Design Optimization under both Model and Design Variables Uncertainty. Journal of Aircraft. 50(2)528-538. 2013 [DOI]
[ACL138]I. Maillet, L. Michel, G. Rico, M. Fressinet and Y. Gourinat. A New test methodology based on structural resonance for mode I fatigue delamination growth in a unidirectional composite. Composite Structures. 97, 353-362. 2013 [DOI]
[ACL139]M. Mousseigne, Y. Landon, S. Seguy, G. Dessein and J.-M. Redonnet. Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. International Journal of Machine Tools and Manufacture. 65, 47-57. 2013 [DOI]
[ACL140]C. Pozzolini, Y. Renard and M. Salaün. Vibro-Impact of a plate on rigid obstacles : existence theorem, convergence of a scheme and numerical simulations. IMA Journal of Numerical Analysis. 33(1)261-294. 2013 [DOI] [OATAO]
[ACL141]N. Roussouly, F. Petitjean and M. Salaün. A new adaptive response surface method for reliability analysis. Probabilistic Engineering Mechanics. 32, 103-115. 2013 [DOI] [OATAO]
[ACL142]X. Giraud, M. Sartor, X. Roboam, B. Sareni, H. Piquet, M. Budinger and S. Vial. Load allocation problem for optimal design of aircraft electrical power system. International Journal of Applied Electromagnetics and Mechanics. 43(1-2)1-13. 2013
[ACL143]P. Longère and A. Dragon. Description of shear failure in ductile metals via back stress concept linked to damage-microporosity softening. Engineering Fracture Mechanics. 98, 92-108. 2013 [DOI]
[ACL144]S. Segonds, C. Bes, F. Monies and J.-M. Redonnet. Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel. International Journal of Manufacturing Research. 8(3)277 - 295. 2013 [DOI]
[ACL145]M. Budinger, A. Reysset, T. El Halabi, C. Vasiliu and J.-C. Maré. Optimal preliminary design of electromechanical actuators. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. , . 2013 [DOI]
[ACL146]L. Sanches, G. Michon, A. Berlioz and D. Alazard. Helicopter Ground Resonance Phenomenon with Blade Stiffness Dissimilarities: Experimental and Theoretical Developments. Journal of Vibration and Acoustics, Transactions of the ASME. 135(5)051028. 2013 [DOI]
[ACL147]J. Astoul, J. Geneix, E. Mermoz and M. Sartor. A simple and robust method for spiral bevel gear generation and tooth contact analysis. International Journal on Interactive Design and Manufacturing. 7, 37-49. 2013 [DOI]
[ACL148]S. Segonds, J. Masounave , V. Songmene and C. Bes. A simple analytical model for burr type prediction in drilling of ductile materials.. Journal of Materials Processing Technology. , . 2013 [DOI]
[ACL149]L. Sanches, D. Alazard, G. Michon and A. Berlioz. Robustness Analysis of Helicopter Ground Resonance with Parametric Uncertainties in Blade Properties. Journal of Guidance, Control, and Dynamics. 36(1)272-281. 2013 [DOI]
[ACL150]G. Michon, A. Almajid and G. Aridon. Soft Hollow Particle Damping Identification in Honeycomb Structures. Journal of Sound and Vibration. 332(3)536–544. 2013 [DOI]
[ACL151]F. Alkatan, J. Andriamampianina, P. Stephan and J. Guillot. Flexibility of hybrid load transfer assemblies: Influence of tightening pre-stress. Aerospace Science and Technology. In Press, . 2013 [DOI]
[ACL152]E. Mermoz, J. Astoul, M. Sartor, J.-M. Linares and A. Bernard. A new methodology to optimize spiral bevel gear topography. CIRP Annals - Manufacturing Technology. 62(1)119-122. 2013 [DOI]
[ACL153]S.G. Kandlikar, S. Colin, Y. Peles, S. Garimella, R.F. Pease, J.J. Brandner and D.B. Tuckerman. Heat transfer in microchannels - 2012 status and research needs. Journal of Heat Transfer. 135(9)091001. 2013 [DOI]
[ACL154]E. Paroissien, F. Gaubert, A. Da Veiga and F. Lachaud. Elasto-Plastic Analysis of Bonded Joints with Macro-Elements. Journal of Adhesion Science and Technology. 27(13)1464-1498. 2013 [HAL]
[ACL155]J. Senatore, K. Moussaoui, S. Segonds, F. Monies and W. Rubio. Analysis of drift in iso-scallop planning – Machining by regions. International Journal of Advanced Manufacturing Technology. 67, 719-732. 2013
[ACL156]X. Pessoles, Y. Landon, S. Segonds and W. Rubio. Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre . International Journal of Advanced Manufacturing Technology. 65, 67-79. 2013 [DOI]
[ACL157]C. Lafforgue-baldas, P. Magaud, P. Schmitz, Z. Zhihao, S. Geoffroy and M. Abbas. Study of microfocusing potentialities to improve bioparticle separation processes: towards an experimental approach. Journal of Flow Chemistry. 3(3)92-98. 2013 [DOI]
[ACL158]J. Andriamampianina, F. Alkatan, P. Stephan and J. Guillot. Determining load distribution between the different rows of fasteners of a hybrid load transfer bolted joint assembly. Aerospace Science and Technology. 23(1)312–320. 2012 [DOI]
[ACL159]M. Paredes. Letter to the editor. Shock and Vibration. 19(6)1181-1183. 2012 [DOI]
[ACL160]J.-C. Passieux and J.-N. Périé. High resolution digital image correlation using proper generalized decomposition: PGD-DIC. International Journal for Numerical Methods in Engineering. 92(6)531-550. 2012 [DOI] [HAL]
[ACL161]S. Pattabhiraman, C. Gogu, N.H. Kim, R.T. Haftka and C. Bes. Skipping unnecessary structural airframe maintenance using an onboard structural health monitoring system. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. 226(5)549-560. 2012 [DOI]
[ACL162]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures. 94(10)3082–3091. 2012 [DOI]
[ACL163]F. Chauvet, S. Geoffroy, A. Hamoumi, M. Prat and P. Joseph. Roles of Gas in Capillary Filling of Nanoslits. Soft Matter. 8(41)10738-10749. 2012 [DOI]
[ACL164]C. Gogu, Y. Qiu, S. Segonds and C. Bes. Optimization Based Algorithms for Uncertainty Propagation Through Functions with Multidimensional Output Within Evidence Theory. Journal of Mechanical Design - Transactions of the ASME. 134(10)914. 2012 [DOI]
[ACL165]J.-C. Maré. Friction modelling and simulation at system level: a practical view for the designer. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 226(6)728 - 741. 2012 [DOI]
[ACL166]F. Rey , A. Ferrand and H. Makhloufi . Contribution to the modelling of a cross-country skier skiing in its environment. Mechanics and Industry. 13(02)127-136. 2012 [DOI]
[ACL167]M. Paredes, N. Nefissi and M. Sartor. Study of an interference fit fastener assembly by finite element modelling, analysis and experiment. International Journal on Interactive Design and Manufacturing. 6, 171-177. 2012 [DOI]
[ACL168]P. Stephan, F. Mathurin and J. Guillot. Experimental study of forming and tightening processes with thread forming screws . Journal of Materials Processing Technology. 212(4)766-775. 2012 [DOI]
[ACL169]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Application of high-performance computing to a bolt static tensile test. International Journal on Interactive Design and Manufacturing. 6, 1-9. 2012 [DOI]
[ACL170]M. Budinger, J. Liscouët, F. Hospital and J.-C. Maré. Estimation models for the preliminary design of electromechanical actuators. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 226(3)243-259. 2012 [DOI] [HAL]
[ACL171]E. Gourc, S. Seguy and G. Dessein. Dynamical modeling of spindle with active magnetic bearing for milling process. Advanced Materials Research. 423, 200-209. 2012 [DOI]
[ACL172]S. Colin. Gas microflows in the slip flow regime: a critical review on convective heat transfer. Journal of Heat Transfer. 134(2)020908. 2012 [DOI]
[ACL173]V. Cazajus, S. Seguy, H. Welemane and M. Karama. Residual stresses in a ceramic-metal composite. Applied Mechanics and Materials. 146, 185-196. 2012 [DOI]
[ACL174]J. Liscouët, J.-C. Maré and M. Budinger. An integrated methodology for the preliminary design of highly reliable electromechanical actuators: Search for architecture solutions. Aerospace Science and Technology. 22(1)9-18. 2012 [DOI]
[ACL175]P. Kerfiden, J.-C. Passieux and S.P.A. Bordas. Local/global model order reduction strategy for the simulation of quasi-brittle fracture. International Journal for Numerical Methods in Engineering. 89(2)154-179. 2012 [DOI] [HAL]
[ACL176]M. Charlotte and L. Truskinovsky. Lattice dynamics from a continuum viewpoint. Journal of the Mechanics and Physics of Solids. 60(8)1508-1544. 2012 [DOI]
[ACL177]X. Pessoles, J.-M. Redonnet, S. Segonds and M. Mousseigne. Modelling and optimising the passage of tangency discontinuities in NC linear paths . International Journal of Advanced Manufacturing Technology. 58(5-8)631–642. 2012 [DOI]
[ACL178]P. Longère, A.-G. Geffroy, B. Leblé and A. Dragon. Modelling the transition between dense metal and damaged (micro-porous) metal viscoplasticity. International Journal of Damage Mechanics. 21(7)1020-1063. 2012 [DOI]
[ACL179]J. Lasry, Y. Renard and M. Salaün. Stress Intensity Factors computation for bending plates with extended finite element method. International Journal for Numerical Methods in Engineering. 91(9)909-928. 2012 [DOI] [OATAO]
[ACL180]T. Reytier, C. Bes, P. Marechal, M. Bianciardi and A. Santgerma. Generation of correlated stress time histories from continuous turbulence Power Spectral Density for fatigue analysis of aircraft structures. International Journal of Fatigue. 42, 147-152. 2012 [DOI]
[ACL181]C. Renault, S. Colin, S. Orieux, P. Cognet and T. Tzédakis. Optimal design of multi-channel microreactor for uniform residence time distribution. Microsystem Technologies. 18(2)209-223. 2012 [DOI]
[ACL182]J. Senatore, S. Segonds, W. Rubio and G. Dessein. Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: application to milling by zones. CAD Computer Aided Design. 44, 1151-1160. 2012
[ACL183]L. Sanches, G. Michon, A. Berlioz and D. Alazard. Parametrically Excited Helicopter Ground Resonance Dynamics with High Blade Asymmetries. Journal of Sound and Vibration. 331, 3897-3913. 2012 [DOI]
[ACL184]C. Renault, J. Roche, M.R. Ciumag, T. Tzedakis, S. Colin, K. Serrano, O. Reynes, C. André-Barrès and P. Winterton. Design and optimization of electrochemical microreactors for continuous electrosynthesis. Journal of Applied Electrochemistry. 42(9)667-677. 2012 [DOI]
[ACL185]R. Shad, G. Michon and A. Berlioz. Nonlinear Dynamics of Rotors due to Large Deformations and Shear Effects. Applied Mechanics and Materials. 110(116)3593-3599. 2012
[ACL186]F. Mohd Zawawi, J. Morlier, G. Grondin and J.-M. Moschetta. Design of Optimum Torsionally Flexible PropRotors for Tilt-Body MAVs. Applied Mechanics and Materials. 225, 281-286. 2012 [DOI] [OATAO]
[ACL187]E. Gourc, S. Seguy and L. Arnaud. Chatter milling modeling of active magnetic bearing spindle in high-speed domain. International Journal of Machine Tools and Manufacture. 51(12)928-936. 2011 [DOI]
[ACL188]C. Pozzolini and M. Salaün. Some energy conservative schemes for vibro-impacts of a beam on rigid obstacles. Mathematical Modelling and Numerical Analysis. 45(6)1163-1192. 2011 [DOI] [OATAO]
[ACL189]C. Brunskill, N. Patel, T. Gouache , G. Scott, C. Saaj, M. Matthews and L. Cui. Characterisation of martian soil simulants for the ExoMars rover testbed . Journal of Terramechanics. 48(6)419-438. 2011 [DOI]
[ACL190]A. Shahdin, J. Morlier, L. Mezeix, C. Bouvet and Y. Gourinat. Evaluation of the impact resistance of various composite sandwich beams by vibration tests. Shock and Vibration. 18(6)789-805. 2011 [DOI] [OATAO]
[ACL191]R. Torres and C. Bes. Uncertainty Tolerance of Multiobjective Environmentally Friendly Departure Procedures for Civil Aircraft. Journal of Aircraft. 48(6)2169-2172. 2011 [DOI]
[ACL192]T. Gouache, Y. Gao, P. Coste and Y. Gourinat. First experimental investigation of dual reciprocating drilling in planetary regoliths : proposition of penetration mechanics. Planetary and Space Science. 59(13)1529–1541. 2011 [DOI]
[ACL193]T. Gouache, N. Patel, C. Brunskill, G. Scott, C. Saaj, M. Matthews and L. Cui. Soil simulant sourcing for the ExoMars rover testbed. Planetary and Space Science. 59(8)779-787. 2011 [DOI]
[ACL194]P. Gilles, J. Senatore, S. Segonds, F. Monies and W. Rubio. Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC machines . International Journal of Production Research. 50(4)1045-1061. 2011 [DOI]
[ACL195]S. Seguy, T. Insperger, L. Arnaud, G. Dessein and G. Peigné. Suppression of period doubling chatter in high-speed milling by spindle speed variation. Machining Science and Technology. 15(2)153-171. 2011 [DOI]
[ACL196]G. Cohen, P. Gilles, S. Segonds, M. Mousseigne and P. Lagarrigue. Thermal and mechanical modeling during dry turning operations . International Journal of Advanced Manufacturing Technology. 58(1-4)133-140. 2011 [DOI]
[ACL197]J.-J. Orteu, F. Bugarin, J. Harvent, L. Robert and V. Velay. Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results. Experimental Mechanics. 51(4)625-639. 2011 [DOI] [HAL]
[ACL198]L. Arnaud, O. Gonzalo, S. Seguy, H. Jauregi and G. Peigné. Simulation of low rigidity part machining applied to thin-walled structures. International Journal of Advanced Manufacturing Technology. 54(5-8)479-488. 2011 [DOI]
[ACL199]F.J. Campa, L.N. Lopez De Lacalle, G. Urbicain, A. Lamikiz, S. Seguy and L. Arnaud. Critical thickness and dynamic stiffness for chatter avoidance in thin floors milling. Advanced Materials Research. 188, 116-121. 2011 [DOI]
[ACL200]A. Shahdin, J. Morlier, H. Niemann and Y. Gourinat. Correlating low energy impact damage with changes in modal parameters : Diagnosis tools and FE validation. Structural Health Monitoring. 10(2)199-217. 2011 [DOI] [OATAO]
[ACL201]J. Liscouët, M. Budinger, J.-C. Maré and S. Orieux. Modelling approach for the simulation-based preliminary design of power transmissions. Mechanism and Machine Theory. 46(3)276-289. 2011 [DOI] [HAL]
[ACL202]D. Bettebghor, N. Bartoli, S. Grihon, J. Morlier and M. Samuelides. Surrogate modeling approximation using a mixture of experts based on EM joint estimation. Structural and Multidisciplinary Optimization. 43(2)243 - 259. 2011 [DOI] [OATAO]
[ACL203]P. Stephan, F. Mathurin and J. Guillot. Analytical study of maximal tapping torque during forming screw process. Journal of Materials Processing Technology. 211(2)212-221. 2011 [DOI]
[ACL204]R. Torres, J. Chaptal, C. Bes and J.B. Hiriart-Urruty. Optimal, Environmentally Friendly Departure Procedures for Civil Aircraft. Journal of Aircraft. 48(1)11-22. 2011 [DOI]
[ACL205]A. Le Bot, E. Bou-chakra and G. Michon. Dissipation of Vibration in Rough Contact. Tribology Letters. 41(1)47-53. 2011 [DOI] [HAL]
[ACL206]J. Limido, C. Espinosa, M. Salaün, C. Mabru, R. Chieragatti and J.-L. Lacome. Metal cutting modelling SPH approach. International Journal of Machining and Machinability of Materials. 9(3-4)177-196. 2011 [DOI] [OATAO]
[ACL207]R. Shad, G. Michon and A. Berlioz. Analytical Study of the Dynamic Behavior of Geometrically Nonlinear Shaft-disk Rotor Systems. Mechanics and Industry. 12(6)433-443. 2011 [DOI]
[ACL208]L. Sanches, G. Michon, A. Berlioz and D. Alazard. Instability Zones for Isotropic and Anisotropic Multibladed Rotor Configurations. Mechanism and Machine Theory. 46(8)1054-1065. 2011 [DOI]
[ACL209]R. Shad, G. Michon and A. Berlioz. Modeling and analysis of nonlinear rotordynamics due to higher order deformations in bending. Applied Mathematical Modelling. 35(5)2145-2159. 2011 [DOI]
[ACL210]T. Gouache, C. Brunskill, G. Scott, Y. Gao, P. Coste and Y. Gourinat. Regolith Simulant Preparation Methods for Hardware Testing. Planetary and Space Science. 58(14-15)1977-1984. 2010 [DOI] [OATAO]
[ACL211]J. Lasry, J. Pommier, Y. Renard and M. Salaün. eXtended finite element methods for thin cracked plates with Kirchhoff-Love theory. International Journal for Numerical Methods in Engineering. 84(9)1115-1138. 2010 [DOI] [OATAO]
[ACL212]S. Seguy, T. Insperger, L. Arnaud, G. Dessein and G. Peigné. On the stability of high-speed milling with spindle speed variation. International Journal of Advanced Manufacturing Technology. 48(9-12)883-895. 2010 [DOI]
[ACL213]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of a new sandwich structure with carbon fiber network core. Journal of Sandwich Structures and Materials. 12(5)569-589. 2010 [DOI] [OATAO]
[ACL214]C. Badufle, C. Blondel, T. Druot, C. Bes and J.B. Hiriart-Urruty. A heuristic-based framework to solve a complex aircraft sizing problem. Engineering Applications of Artificial Intelligence. 23(5)704-714. 2010 [DOI]
[ACL215]H. Youssef , A. Ferrand, P. Calmon and P. Pons. Methods to improve reliability of bulge test technique to extract mechanical properties of thin film. Microelectronics and reliability. 50(9-11)1888-1893. 2010 [DOI]
[ACL216]H. Niemann, J. Morlier, A. Shahdin and Y. Gourinat. Damage Localization using Experimental Modal Parameters and Topology Optimization. Mechanical Systems and Signal Processing. 24(3)636-652. 2010 [DOI] [OATAO]
[ACL217]S. Seguy, G. Dessein, L. Arnaud and T. Insperger. Control of chatter by spindle speed variation in high-speed milling. Advanced Materials Research. 112, 179-186. 2010 [DOI]
[ACL218]A. Shahdin, J. Morlier and Y. Gourinat. Damage monitoring in sandwich beams by modal parameter shifts : A comparative study of burst random and sine dwell vibration testing. Journal of Sound and Vibration. 329(5)566-584. 2010 [DOI] [OATAO]
[ACL219]C. Gogu, R.T. Haftka, R. Le riche, J. Molimard and A. Vautrin. Introduction to the Bayesian approach applied to elastic constants identification. AIAA Journal. 48(5)893-903. 2010 [DOI]
[ACL220]Y. Gourinat, U. Apel and F. Delbart. The AEROCREW mission: Training space session at Ny Alesund Arctic Base. Acta Astronautica. 66(1-2)74-77. 2010 [DOI] [OATAO]
[ACL221]W. Karam and Jean-C Maré. Advanced Model Development and Validation of Landing Gear Shock Struts. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 224(G5)575-586. 2010 [DOI]
[ACL222]J. Morlier and G. Michon. Virtual Vibration Measurement Using KLT Motion Tracking Algorithm. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 132(1). 2010 [DOI]
[ACL223]A. Batikh, L. Baldas, R. Caen, W. Ghozlani and A. Kourta. Experimental characterization of sub-millimetric fluidic actuators: application to boundary layer separation control. Experimental Heat Transfer. 23(1)4-26. 2010 [DOI]
[ACL224]M. Paredes and A. Daidié. Optimal catalogue selection and custom design of Belleville spring arrangements. International Journal on Interactive Design and Manufacturing. 4(1)51-59. 2010 [DOI]
[ACL225]L. Szalmas, J. Pitakarnnop, S. Geoffroy, S. Colin and D. Valougeorgis. Comparative study between computational and experimental results for binary rarefied gas flows through long microchannels. Microfluidics and Nanofluidics. 9(6)1103-1114. 2010 [DOI]
[ACL226]J. Pitakarnnop, S. Varoutis, D. Valougeorgis, S. Geoffroy, L. Baldas and S. Colin. A novel experimental setup for gas microflows. Microfluidics and Nanofluidics. 8(1)57-72. 2010 [DOI]
[ACL227]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Monitoring the Effects of Impact Damages on Modal Parameters in Carbon Fiber Entangled Sandwich Beams. Engineering Structures. 31(12)2833-2841. 2009 [DOI] [OATAO]
[ACL228]A. Shahdin, J. Morlier and Y. Gourinat. Correlating low energy impact damage with changes in modal parameters : A preliminary study on composite beam. Structural Health Monitoring. 8(6)523-536. 2009 [DOI] [OATAO]
[ACL229]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of glass fiber entangled sandwich beams : a comparison with honeycomb and foam sandwich beams. Composite Structures. 90(4)404-412. 2009 [DOI] [OATAO]
[ACL230]F. Mathurin, J. Guillot, P. Stephan and A. Daidié. 3D Finite Element Modeling of an Assembling Process with Thread Forming Screw. Journal of Manufacturing Science and Engineering, Transactions of the ASME. 131(4)1-8. 2009 [DOI]
[ACL231]S. Liscouet Hanke, J.-C. Maré and S. Pufe. Simulation Framework for Aircraft Power System Architecting. Journal of Aircraft. 46(4)1375-1380. 2009 [DOI]
[ACL232]M. Calamaz, J. Limido, M. Nouari, C. Espinosa, D. Coupard, M. Salaün, F. Girot and R. Chieragatti. Toward a better understanding of tool wear effect through a comparison between experiments and SPH numerical modelling of machining hard materials. International Journal of Refractory Metals and Hard Materials. 27(3)595–604. 2009 [DOI] [OATAO]
[ACL233]L. Saintis, E. Hugues, C. Bes and M. Mongeau. Computing In-Service Aircraft Reliability. International Journal of Reliability, Quality and Safety Engineering. 16(2)91-116. 2009 [DOI]
[ACL234]P. Selva, J. Morlier and Y. Gourinat. Development of a dynamics virtual reality model of the inner ear sensory system as a learning and demonstrating tool. Modelling and Simulation in Engineering. 2009(ID 245606). 2009 [OATAO]
[ACL235]A. Barrot, M. Paredes and M. Sartor. Extended equations of load distribution in the axial direction in a spline coupling. Engineering Failure Analysis. 16(1)200-211. 2009 [DOI]
[ACL236]W. Karam and J.-C. Maré. Modelling and simulation of mechanical transmission in roller-screw electromechanical actuators. Aircraft Engineering and Aerospace Technology. 81(4)288-298. 2009 [DOI]
[ACL237]L. Manin, G. Michon, D. Remond and R. Dufour. From Transmission Error Measurement to Pulley-Belt Slip Determination in Serpentine Belt Drives: Influence of Tensioner and Belt Characteristics. Mechanism and Machine Theory. 44(4)813-821. 2009
[ACL238]F. Chauvet, P. Duru, S. Geoffroy and M. Prat. Three Periods of Drying of a Single Square Capillary Tube. Physical Review Letters. 103(12). 2009 [DOI]
[ACL239]M. Paredes and E. Rodriguez. Optimal design of conical Springs. Engineering With Computers. 25(2)147-154. 2009 [DOI]
[ACL240]M. Paredes. Methodology to build an assistance tool dedicated to preliminary design: application to compression springs. International Journal on Interactive Design and Manufacturing. 3(4)265-272. 2009 [DOI]
[ACL241]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction. International Journal of Material Forming. 2(1)271–274. 2009 [DOI]
[ACL242]A. Shahdin, J. Morlier and Y. Gourinat. Significance of Low Energy Impact Damage on Modal Parameters of Composite Beams by Design of Experiments. Journal of Physics: Conference Series. 181(1). 2009 [DOI]
[ACL243]R. Khelfaoui, S. Colin, R. Caen, S. Orieux and L. Baldas. Numerical and experimental analysis of monostable mini- and micro-oscillators. Heat Transfer Engineering. 30(1-2)121-129. 2009 [DOI]
[ACL244]N. Driot, A. Berlioz and C.-H. Lamarque. Stability and Stationary Response of a Skew Jeffcott Rotor with Geometric Uncertainty. Journal of Computational and Nonlinear Dynamics. 4(2). 2009 [DOI]
[ACL245]A. Daidié, Z. Chaib and A. Ghosn. 3D simplified finite elements analysis of load and contact angle in a slewing ball bearing . Journal of Mechanical Design - Transactions of the ASME. 130(8)082601 1-8. 2008 [DOI]
[ACL246]M. Cyr, P. Rivard, F. Labrecque and A. Daidié. High-pressure device for fluid extraction from porous materials: Application to cement-based materials . Journal of the American Ceramic Society. 91(8)2653-2658. 2008 [DOI]
[ACL247]Y. Fares, M. Chaussumier and A. Daidié. Comparative study of the mechanical characteristics of 42CrMo4 class 8.8 steel bolts depending on the manufacture process . Mécanique & Industries. 9(4)315-322. 2008 [DOI]
[ACL248]A. Barrot, M. Paredes and M. Sartor. Investigation of torsional teeth stiffness and second moment of area calculations for an analytical model of spline coupling behaviour. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 22(6)891-902. 2008 [DOI]
[ACL249]G. Cohen, S. Segonds, M. Mousseigne and P. Lagarrigue. Tool Flank Wear Influence On Workpiece Heating In Dry Machining . International Journal of Machining and Machinability of Materials. , . 2008 [DOI]
[ACL250]D. Leray, A. Vadean and A. Daidié. Fast computation of preloaded bolted circular joint aiming at fatigue bolt sizing - Hypotheses and modeling . Engineering Computations. 25(1-2)42-54. 2008 [DOI]
[ACL251]J. Chakhari, A. Daidié, Z. Chaib and J. Guillot. Numerical model for two-bolted joints subjected to compressive loading . Finite Elements in Analysis and Design. 44(4)162-173. 2008 [DOI]
[ACL252]S. Liscouet Hanke, S. Pufe and J.-C. Maré. A simulation framework for aircraft power management. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 222(6)749-756. 2008 [DOI]
[ACL253]G. Michon, L. Manin, D. Remond, R. Dufour and R. Parker. Parametric Instability of an Axially Moving Belt Subjected to Multi-frequency Excitations: Experiment and Analytical validation. Journal of Applied Mechanics, Transactions ASME. 75(4). 2008 [DOI]
[ACL254]E. Chatelet, G. Michon, L. Manin and G. Jacquet. Stick/slip Phenomena in Dynamics: Choice of Contact Model. Numerical Predictions & Experiments. Mechanism and Machine Theory. 43(10)1211-1224. 2008
[ACL255]B. Lienhardt, E. Hugues, C. Bes and D. Noll. Failure-Finding Frequency for a Repairable System Subject to Hidden Failures. Journal of Aircraft. 45(5)1804-1809. 2008 [DOI]
[ACL256]P. Destuynder, Y. Moguen and M. Salaün. Adaptive mesh refinements for thin shells whose middle surface is not exactly known. Computer Methods in Applied Mechanics and Engineering. 197, 4789-4811. 2008 [DOI] [OATAO]
[ACL257]A. Vabre, S. Legoupil, S. Colin, S. Geoffroy, W.-K. Lee and K. Fezzaa. X-ray propagation-base phase-enhanced imaging of the meniscus of a capillary flow in a rectangular microchannel. International Journal of Heat and Technology. 26(1)109-115. 2008
[ACL258]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimizaton of BEM-based cooling channels injection moulding using model reduction. International Journal of Material Forming. 1(1)1043-1046. 2008 [DOI]
[ACL259]N. Pirc, F. Bugarin, F. Schmidt and M. Mongeau. 3D BEM-based cooling-channel shape optimization for injection moulding processes. International Journal for Simulation and Multidisciplinary Design Optimization. 2(3)245-252. 2008 [DOI]
[ACL260]C. Barrot Lattes, D. Newport, S. Chiavaroli, G.L. Morini, L. Baldas and S. Colin. 3-D reconstruction of velocity profiles in rectangular microchannels. International Journal of Heat and Technology. 26(1)153-159. 2008
[ACL261]A. Batikh, R. Caen, S. Colin, L. Baldas, A. Kourta and H.-C. Boisson. Numerical and experimental study of micro synthetic jets for active flow control. International Journal of Heat and Technology. 26(1)139-145. 2008
[ACL262]J. Pitakarnnop, S. Geoffroy, S. Colin and L. Baldas. Slip flow in triangular and trapezoidal microchannels. International Journal of Heat and Technology. 26(1)167-174. 2008
[ACL263]J.-C. Maré and B. Attar. Enhanced model of four ways servovalves characteristics and its validation at low temperature. International Journal of Fluid Power. 9(2)35-43. 2008
[ACL264]G. Michon, L. Manin, R. Parker and R. Dufour. Duffing Oscillator with Parametric Excitation: Analytical and Experimental Investigation on a Belt-pulley System. Journal of Computational and Nonlinear Dynamics. 3(3). 2008 [DOI]
[ACL265]S. Segonds, C. Bes, G. Cohen and Y. Landon. Statistical Study Of The Spindle Dilatation Phenomena—application To A Nc Lathe . International Journal of Machine Tools and Manufacture. 47(15)2307-2311. 2007 [DOI]
[ACL266]C. Bes, V. Belloeil, G. Plantier, Y. Gourinat and T. Bosch. A Self-Mixing Laser Sensor Design with an Extended Kalman Filter for Optimal Online Structure Analysis and Damping Evaluation. Transactions on Mechatronics. 12(3)387-394. 2007 [OATAO]
[ACL267]E. Paroissien, M. Sartor, J. Huet and F. Lachaud. Analytical Two-Dimensional Model of a Hybrid (Bolted/Bonded) Single-Lap Joint. Journal of Aircraft. 44(2)573-582. 2007
[ACL268]Y. Gourinat and V. Belloeil. A truncated low approach of intrinsic linear and nonlinear damping in thin structures. Journal of Vibration and Acoustics, Transactions of the ASME. 129, 32-38. 2007 [OATAO]
[ACL269]C. Bauer, K. Lagadec, C. Bes and M. Mongeau. Flight control system architecture optimization for fly-by-wire airliners. Journal of Guidance, Control, and Dynamics. 30(4)1023-1029. 2007 [DOI]
[ACL270]M. Salaün and S. Salmon. Numerical stabilization of the Stokes problem in vorticity-velocity-pressure formulation. Computer Methods in Applied Mechanics and Engineering. 196, 1767-1786. 2007 [DOI] [OATAO]
[ACL271]J. Limido, C. Espinosa, J.-L. Lacome and M. Salaün. SPH method applied to high speed cutting modelling. International Journal Of Mechanical Sciences. 49, 898-908. 2007 [DOI] [OATAO]
[ACL272]O. Amyot, F. Flukiger, S. Geoffroy, F. Plouraboué and M. Prat. Critical point network for drainage between rough surfaces. Transport in Porous Media. 70(2)257-277. 2007
[ACL273]A. Batikh, L. Baldas, R. Caen and S. Colin. Active control for aerodynamics by means of microfluidic actuators. Houille Blanche - Revue Internationale de l'Eau. (3)110-116. 2007 [DOI]
[ACL274]K. Curran, M. Davies, L. Baldas and S. Colin. Unstable coalescence in the mixing of microcapillary suspended aqueous droplets in silicone oil. Houille Blanche - Revue Internationale de l'Eau. (3)104-109. 2007 [DOI]
[ACL275]G.L. Morini, M. Lorenzini, S. Colin and S. Geoffroy. Experimental analysis of pressure drop and laminar-to-turbulent transition for gas flows in smooth microtubes. Heat Transfer Engineering. 28(8-9)670-679. 2007 [DOI]
[ACL276]J. Morlier, P. Salom and F. Bos. New image processing tools for structural dynamic monitoring. Key Engineering Materials. 34, 239 - 244. 2007 [DOI] [OATAO]
[ACL277]J. Bastien, G. Michon, L. Manin and R. Dufour. An Analysis of the Masing and Modified Dahl Models. Application to a Belt Tensioner. Journal of Sound and Vibration. 302(4-5)841-864. 2007 [DOI]
[ACL278]Y. Michel, J.-M. Chevalier, C. Durin, C. Espinosa, F. Malaise and J.-J. Barrau. Hypervelocity impacts on thin brittle targets: Experimental data and SPH simulations. International Journal of Impact Engineering. 33(1-12)441-451. 2006 [DOI]
[ACL279]J. Limido, C. Espinosa, M. Salaün and J.-L. Lacome. A new approach of high speed cutting modelling:SPH method. Journal de Physique 4. 134, 1195-1200. 2006 [DOI]
[ACL280]S. Segonds, Y. Landon, F. Monies and P. Lagarrigue. Method For Rapid Characterisation Of Cutting Forces In End Milling Considering Runout . International Journal of Machining and Machinability of Materials. 1(1)45-61. 2006
[ACL281]Y. Michel, J.-M. Chevalier, C. Durin, C. Espinosa, F. Malaise and J.-J. Barrau. Meshless modelling of dynamic behaviour of glasses under intense shock loadings: Application to matter ejection during high velocity impacts on thin brittle targets. Journal de Physique 4. 134, 1077-1083. 2006 [DOI]
[ACL282]S. Segonds, G. Cohen, Y. Landon, F. Monies and P. Lagarrigue. Characterising The Behaviour Of Workpieces Under The Effect Of Tangential Cutting Force During Nc Turning. Application To Machining Of Slender Workpieces . Journal of Materials Processing Technology. 171(3)471-479. 2006 [DOI]
[ACL283]C. Lattes, S. Colin, S. Geoffroy and L. Baldas. Effects of the electrical double layer on Poiseuille microflows. Houille Blanche - Revue Internationale de l'Eau. (1)47-52. 2006 [DOI]
[ACL284]S. Geoffroy, F. Plouraboué, M. Prat and O. Amyot. Quasi-static liquid-air drainage in narrow channels with variations in the gap. Journal of Colloid and Interface Science. 294(1)165-175. 2006
[ACL285]P. Laborde, J. Pommier, Y. Renard and M. Salaün. Une méthode d’éléments finis étendue d’ordre supérieur optimale. Revue Européenne de Mécanique Numérique. 15(1-2-3)233-244. 2006
[ACL286]N. Driot , C.-H. Lamarque and A. Berlioz. Theoretical and Experimental Analysis of a Base Excited Rotor. Journal of Computational and Nonlinear Dynamics. 1(4)257-263. 2006
[ACL287]M. Duchemin, A. Berlioz and G. Ferraris. Dynamic Behavior and Stability of a Rotor under base Excitation. Journal of Vibration and Acoustics, Transactions of the ASME. 128 (5)576-585. 2006
[ACL288]G. Ferraris, M.-A. Andrianoely, A. Berlioz, R. Dufour and M. Charreyron. Influence of cylinder pressure on the balancing of a rotary compressor. Journal of Sound and Vibration. 292, 899-910. 2006
[ACL289]P. Abgrall, C. Lattes, V. Conédéra, X. Dollat, S. Colin and A.-M. Gué. A novel fabrication method of flexible and monolithic 3D microfluidic structures using lamination of SU-8 films. Journal of Micromechanics and Microengineering. 16(1)113-121. 2006 [DOI]
[ACL290]G.L. Morini and L. Baldas. Convection forcée de liquides en régime laminaire dans des micro-canaux en silicium. Houille Blanche - Revue Internationale de l'Eau. (1)20-25. 2006 [DOI]
[ACL291]J.-C. Maré. Dynamic loading systems for ground testing of high speed aerospace actuators. International Journal of Aircraft Engineering and Aerospace Technology. 78(4)275–282. 2006 [DOI]
[ACL292]A. Vabre, S. Legoupil, E. Manach, O. Gal, S. Colin, S. Geoffroy and A. Gue. X-Ray imaging method evaluation in microfluidics: case of a «T» shaped microchannel filling. Houille Blanche - Revue Internationale de l'Eau. (5)33-39. 2006 [DOI]
[ACL293]S. Segonds, J.-M. Redonnet, Y. Landon, C. Bes and P. Lagarrigue. Characterisation Of The Workpiece Dilatation Phenomenon During Milling Using The Neural Network Method. Application To The Nc Turning . International Journal of Advanced Manufacturing Technology. 27(1-2)83-89. 2005 [DOI]
[ACL294]M. Mongeau and C. Bes. Aircraft Maintenance Jacking Problem via Optimization. IEEE Transactions on Aerospace and Electronic Systems. 41(1)99-109. 2005 [DOI]
[ACL295]P. Laborde, J. Pommier, Y. Renard and M. Salaün. High order extended finite element method for cracked domains. International Journal for Numerical Methods in Engineering. 64(3)354-381. 2005 [DOI] [OATAO]
[ACL296]S. Geoffroy, S. Mergui and D. Gobin. Heat and mass transfer during solidification of a binary solution from a horizontal plate. Experimental Thermal and Fluid Science. 29(2)169-178. 2005
[ACL297]Y. Gourinat and V. Belloeil. An analytical model of an elementary elliptical cell forming an alveolar elastic material under plane stress. Materials and Design. 27(10)1055-1064. 2005 [OATAO]
[ACL298]S. Colin. Rarefaction and compressibility effects on steady and transient gas flows in microchannels. Microfluidics and Nanofluidics. 1(3)268-279. 2005 [DOI]
[ACL299]A. Berlioz and C.-H. Lamarque. Nonlinear Vibrations of an Inclined Cable. Journal of Vibration and Acoustics, Transactions of the ASME. 127(4)315-323. 2005
[ACL300]K. Curran, S. Colin, L. Baldas and M. Davies. Liquid bridge instability applied to microfluidics. Microfluidics and Nanofluidics. 1(4)336-345. 2005 [DOI]
[ACL301]A. Berlioz and C.-H. Lamarque. A nonlinear model for the dynamic of an inclined cable. Journal of Sound and Vibration. 279, 619-639. 2005
[ACL302]G. Michon, L. Manin and R. Dufour. Hysteretic Behavior of a Belt Tensioner: Modelling and Experimental Investigation. Journal of Vibration and Control. 11, 1147-1158. 2005 [DOI]
[ACL303]S. Segonds, Y. Landon, M. Mousseigne and P. Lagarrigue. The Characterisation Of Dimensional Change Of Z Axis In Nc Turning . International Journal of Advanced Manufacturing Technology. 23(11-12)800-805. 2004 [DOI]
[ACL304]Y. Landon, S. Segonds, P. Lascoumes and P. Lagarrigue. Tool Positioning Error (tpe) Characterisation In Milling . International Journal of Machine Tools and Manufacture. , . 2004 [DOI]
[ACL305]F. Plouraboué, S. Geoffroy and M. Prat. Conductances between confined rough walls. Physics Of Fluids. 16(6)615-624. 2004
[ACL306]S. Geoffroy and M. Prat. On the leak through a spiral groove metallic static ring gasket. Journal of Fluids Engineering, Transactions of the ASME. 126(1)48-54. 2004
[ACL307]S. Colin and L. Baldas. Effets de raréfaction dans les micro-écoulements gazeux. Comptes Rendus Physique. 5(5)521-530. 2004 [DOI]
[ACL308]M. Duchemin, A. Berlioz and G. Ferraris. Etude du comportement dynamique des rotors embarqués: modélisation – expérimentation. Essais Industriels, ASTE. 30, 27-33. 2004
[ACL309]S. Colin, P. Lalonde and R. Caen. Validation of a second-order slip flow model in rectangular microchannels. Heat Transfer Engineering. 25(3)23-30. 2004 [DOI]
[ACL310]G. Bálint, L. Baldas, J. Rohács and R. Caen. Simulation of microdiodes. Periodica Polytechnica Transportation Engineering. 32(1-2)35-42. 2004
[ACL311]Y. Landon, S. Segonds, M. Mousseigne and P. Lagarrigue. Correction Of Milling Tool Paths By Tool Positioning Defect (TPD) Compensation . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217(8)1063-1073. 2003
[ACL312]M. Mongeau and C. Bes. Optimization of Aircraft Container Loading. IEEE Transactions on Aerospace and Electronic Systems. 39(1)140-150. 2003 [DOI]
[ACL313]G. Bálint, L. Baldas, J. Rohács, R. Caen and S. Colin. Numerical study of convergent/divergent microdiodes. Houille Blanche - Revue Internationale de l'Eau. (4)43-48. 2003 [DOI]
[ACL314]S. Colin, M. Anduze, P. Lalonde, R. Caen and L. Baldas. Analysis of gas and liquid flows in micro-ducts: experimental uncertainties decoupling. Houille Blanche - Revue Internationale de l'Eau. (5)104-110. 2003 [DOI]
[ACL315]F. Seve, M.-A. Andrianoely, A. Berlioz, R. Dufour and M. Charreyron. Balancing of machinery with a flexible variable-speed rotor. Journal of Sound and Vibration. 264, 287-302. 2003
[ACL316]H. Melakhessou, A. Berlioz and G. Ferraris. A Nonlinear well-Drillstring Interaction Model. Journal of Vibration and Acoustics, Transactions of the ASME. 125(1)46-52. 2003
[ACL317]J. Montagny, A. Berlioz and R. Dufour. Dynamique de structures souples en mouvement transitoire. Mécanique Industrielle et Matériaux. 4(2)113-118. 2003
[ACL318]M. Anduze, S. Colin, R. Caen, H. Camon, V. Conedera and T. Do Conto. Analysis and testing of a fluidic vortex microdiode. Journal of Micromechanics and Microengineering. 11(2)108-112. 2001 [DOI]
[ACL319]C. Aubert and S. Colin. High-order boundary conditions for gaseous flows in rectangular microchannels. Microscale Thermophysical Engineering. 5(1)41-54. 2001 [DOI]
[ACL320]S. Segonds, P. Lagarrigue, J.-M. Redonnet and W. Rubio. Compensation For Machining Defects Due To Spindle Dilatation . International Journal of Machine Tools and Manufacture. , . 2001
[ACL321]M. Anduze, S. Colin and H. Camon. Fluidic microdiodes: an alternative for microvalves. Mécanique & Industries. 2(4)349-354. 2001
[ACL322]P. Lalonde, S. Colin and R. Caen. Gas flow measurement in microsystems. Mécanique & Industries. 2(4)355-362. 2001
[ACL323]J.-C. Maré, O. Geider and S. Colin. An improved dynamic model of pneumatic actuators. International Journal of Fluid Power. 1(2)39-47. 2000 [DOI]
[ACL324]A. Berlioz, R. Dufour and S. Sinha. Bifurcation in a nonlinear autoparametric system using experimental and numerical investigations. Nonlinear Dynamics. 23, 175-187. 2000
[ACL325]S. Colin, C. Aubert and R. Caen. Unsteady gaseous flows in rectangular microchannels: frequency response of one or two pneumatic lines connected in series. European Journal of Mechanics, B/Fluids. 17(1)79-104. 1998 [DOI]
[ACL326]S. Orieux, L. Baldas and J.-C. Maré. Système intégré d'obturation automatique de préhenseurs à attraction pneumatique. Comptes Rendus de l'Académie des Sciences, Série IIb. , 495-501. 1997 [DOI]
[ACL327]J.-C. Maré. Self tuning generalised predictive control of an electrohydraulic actuator. International Journal of Robotics and Automation. 11(1)41-47. 1996
[ACL328]R. Caen, I. Mas and S. Colin. Ecoulements non permanents dans les microcanaux : réponse fréquentielle des microtubes pneumatiques. Comptes Rendus de l'Académie des Sciences, Série IIb. 323, 805-812. 1996
[ACL329]S. Colin, A. Bonnet and R. Caen. A new high supply pressure pneumatic flapper-nozzle with linear behavior. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 118(2)259-266. 1996 [DOI]
[ACL330]C. Herrara, B. Gorla and J.-C. Maré. Vers la commande adaptative d'un actionneur électrohydraulique de position,. Journal of Automation and CIM - Revue d'Automatique et de Productique Appliquées. 4(2)123-140. 1991
[ACL331]C. Bes and S.P. Sethi. Solution of a Class of Stochastic Linear-Convex Control Problems using Deterministic Equivalents. Journal of Optimization Theory and Applications. 62(1)17-27. 1989 [DOI]
[ACL332]C. Bes and S.P. Sethi. Concepts of Forecast and Decision Horizons: Applications to Dynamic Stochastic Optimization Problems. Mathematics of Operations Research. 13(2)295-310 . 1988 [DOI]
[ACL333]C. Bes and J.B. Lasserre. An On-line Procedure in Discounted Infinite-Horizon Stochastic Optimal Control. Journal of Optimization Theory and Applications. 50(1)61-67. 1986 [DOI]
[ACL334]J.B. Lasserre, C. Bes and F. Roubellat. Stochastic Discrete Dynamic Lot Size Problem: An Open Loop Solution. Operations Research. 33(3)684-689. 1985 [DOI]
[ACL335]J.B. Lasserre, C. Bes and F. Roubellat. On the Open-Loop Solution of Stochastic Optimal Control Problems. IEEE Transactions on Automatic Control. AC-29(6). 1984
[ACL336]J.B. Lasserre and C. Bes. Infinite Horizon non Stationary Stochastic Optimal Control Problem : A Planning Horizon Result. IEEE Transactions on Automatic Control. AC-29(9). 1984

Article de revue avec comité de lecture non répertorié

[ACLN1]F. Lachaud, R. Piquet, G. Aldebert , J. Huet and L. Michel. Analyse du comportement mécanique des assemblages boulonnés composites à renforts tissés. Revue des Composites et des Materiaux Avances. 24(4)449-464. 2014
[ACLN2]X. Wang, A. Reysset, V. Budinger and Y. Gourinat. A Modified Preisach Model and its Inversion for Hysteresis Compensation in Piezoelectric Actuators.. Multidiscipline Modeling in Materials & Structures. 10(1)122-142. 2014 [DOI]
[ACLN3]F. Mohd Zawawi, P. Lu, S. Prothin, J. Morlier, J.-M. Moschetta and E. Benard. Study of a flexible UAV proprotor. International Journal of Engineering Systems Modelling and Simulation. 6(3/4)149-161. 2014 [OATAO]
[ACLN4]X. Wang, V. Budinger and Y. Gourinat. A Specific Methodology of Creep Compensation for Piezoelectric Actuators by Open-loop control. Applied Mechanics and Materials. 281, 141-145. 2013 [DOI]
[ACLN5]L. Cot and R. Lozi. Regular subsampling process assessment based on parameter estimation. International Journal of Chaotic Computing. 1(1 and 2). 2013
[ACLN6]C. Pozzolini, Y. Renard and M. Salaün. The singular dynamic method for dynamic contact of thin elastic structures. ESAIM Proceedings. 42, 20-33. 2013 [DOI] [OATAO]
[ACLN7]M. Haddad, Y. Gourinat and M. Charlotte. Equivalence Theory Applied to Anisotropic Thin Plates. Engineering. 3(7)669-679. 2011 [DOI]
[ACLN8]S. Segonds, C. Gogu, Y. Qiu, C. Bes and A. Mauffrey. Design optimization under evidence based uncertainty with application to an engine connecting rod. International Journal of Design and Innovation Research. 5(3)77-91. 2010
[ACLN9]P. Selva, J. Morlier and Y. Gourinat. Toward a three-dimensional finite-element model of the human inner ear angular accelerometers sensors. International Journal for Computational Vision and Biomechanics. 3(2)149-156. 2010 [OATAO]
[ACLN10]A. Jones and M. Paredes. Prestressing of Compression Springs Part2: Experimental Study. Springs. 48(2)43-47. 2009
[ACLN11]A. Jones and M. Paredes. Prestressing of Compression Springs Part 1: theoretical study. Springs. 48(1)48-52. 2009
[ACLN12]J. Lasry, Y. Renard and M. Salaün. A numerical approach for modelling thin cracked plates with XFEM. ESAIM Proceedings. 27, 240-253. 2009 [DOI] [OATAO]
[ACLN13]A. Ponceau, A. Ghosn, D. Tervé and A. Daidié. Internal load calculation in a slewing bearing. Revue d'Ingénierie Numérique collaborative. 1(1-2)165-181. 2009
[ACLN14]Y. Gourinat and V. Lapoujade. A Dynamic Modelling of Safety Nets. Multidiscipline Modeling in Materials & Structures. 4(3)207-226. 2008 [OATAO]
[ACLN15]J. Mueller, Y. Gourinat, R. Ferrer, T. Krysinski and B. Kerdreux. A Numerical Study on Active Control for Tiltrotor Whirl Flutter Stability Augmentation. Journal of the American Helicopter Society. 51(3)244-254. 2006 [OATAO]
[ACLN16]M. Anduze, S. Colin, R. Caen, H. Camon, V. Conedera and T. Do Conto. Analisi teoretica e sperimentale di un microdiodo fluidico a vortici. Oleodinamica Pneumatica. 44(8)82-89. 2003
[ACLN17]L. Manin, G. Michon, E. Comble and R. Dufour. Détermination Expérimentale des Caractéristiques Mécaniques des Courroies de Transmission. Revue des Composites et des Materiaux Avances. 13(3)317-326. 2003
[ACLN18]M. Rousseau, F. Haddad and Y. Gourinat. Un dispositif pour la caractérisation des propriétés amortissantes de matériaux viscoélastiques non-linéaires en cisaillement. Mécanique & Industries. 2002-3(2)271-278. 2002 [OATAO]
[ACLN19]Y. Gourinat and A. Salem. L’amortissement dynamique non-destructif au sein des matériaux structuraux. Sciences (ISSN 0151-0304). 2001-3, 57-65. 2001 [OATAO]
[ACLN20]Y. Gourinat. Applications de la dynamique explicite à l’ENSICA : Atterrissage & amerrissage des spationefs et problèmes d’absorption d’énergie. Mécanique & Industries. 2001-2(1)63-68. 2001 [OATAO]
[ACLN21]Y. Gourinat and A.S. Pramono. Educational Applications of Photoelastodynamics for Solid Mechanics and Dynamics of Structures. Machine Graphics & Vision International Journal. 8(4)655-666. 1999 [OATAO]
[ACLN22]F. Gourinat and Y. Gourinat. Expériences d’Ophtalmologie en Impesanteur. Médecine Aéronautique & Spatiale. 142(129-136). 1997
[ACLN23]C. Espinosa and F. Collombet. Impact de plaques composites : caractérisation et modèles. Journal De Physique, III. 1, 1953-1968. 1991 [DOI]

Articles dans des revues sans comité de lecture

[ASCL1]H.L. Dorothy , P. Longère and A. Dragon. Coupled ASB-and-microvoiding-assisted Dynamic Ductile Failure. Procedia Engineering. 197, 60-68. 2017 [DOI]
[ASCL2]A.J.H. Frijns, D. Valougeorgis and S. Colin. Editorial for the special issue on non-equilibrium gas flows. European Journal of Mechanics, B/Fluids. 64, 1. 2017 [DOI]
[ASCL3]H.L. Dorothy , P. Longère and A. Dragon. Modelling of high strain rate failure under ASB and microvoiding. Procedia Engineering. 173, 593-600. 2017 [DOI]
[ASCL4]S. Colin, J.J. Brandner, G.L. Morini and B. Michel. Selected papers from the 3rd European Conference on Microfluidics: μFlu’12. Microsystem Technologies. 21(3)497-498. 2015 [DOI]
[ASCL5]S. Colin, G.L. Morini and J.J. Brandner. Selected papers from the third European Conference on Microfluidics: µFlu’12. Microfluidics and Nanofluidics. 16(6)997–998. 2014 [DOI]
[ASCL6]C. Espinosa, M. Ruiz-ayuso and F. Lachaud. Inner Damage and External Dent in Composite Structures after Impact – Part I: Experimental Observations. Key Engineering Materials. 577-578, 457-460. 2014
[ASCL7]S. Colin, G.L. Morini and J.J. Brandner. Selected papers from the 3rd European Conference on Microfluidics - µFlu'12. Experimental Heat Transfer. 27(4)313-315. 2014 [DOI]
[ASCL8]L. Michel, S. Garcia, Y. Chen, C. Espinosa and F. Lachaud. Experimental and Numerical Investigation of Delamination in Curved-Beam Multidirectional Laminated Composite Specimen. Key Engineering Materials. 577-578, 389-392. 2014
[ASCL9]C. Espinosa, B. Kobyé, L. Michel and F. Lachaud. Numerical prediction of damage interaction during L-Shaped laminated composite structures unfolding. Key Engineering Materials. 577-578, 461-464. 2014
[ASCL10]S. Colin, G. L. Morini and J.J. Brandner. Editorial: selected papers from the 3rd European Conference on Microfluidics - µFlu'12. International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena. 4(3-4). 2013
[ASCL11]S. Colin, G.L. Morini, J.J. Brandner and P. Watts. Editorial. Journal of Flow Chemistry. 3(3)65. 2013 [DOI]
[ASCL12]S. Colin and G.L. Morini. Editorial: Selected papers from the 2nd European Conference on Microfluidics - μFlu’10. International Journal of Microscale and Nanoscale Thermal and Fluid Transport Phenomena. 3(1)1-3. 2012
[ASCL13]A. Frijns, D. Valougeorgis, S. Colin and L. Baldas. 1st European Conference on Gas Micro Flows (GasMems 2012). Journal of Physics: Conference Series. 362(1)011001. 2012 [DOI]
[ASCL14]V. Keryvin, J.-S. Brest, P. Longère and A. Anguet. Pressure sensitivity of plasticity in metallic glasses below glass transition: a literature review. Materials Science Forum. 706-709, 1318-1323. 2012 [DOI]
[ASCL15]S. Colin, G.L. Morini and M. Bernd. Selected papers from the 2nd European conference on microfluidics: μFlu’10. Microsystem Technologies. 18(2)149-150. 2012 [DOI]
[ASCL16]S. Colin and G.L. Morini. 2nd European Conference on Microfluidics - μFlu’10 December 8-10, 2010, Toulouse, France. Houille Blanche - Revue Internationale de l'Eau. (4)3. 2011
[ASCL17]M. Ilyas, C. Espinosa, F. Lachaud, L. Michel and M. Salaün. Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. Key Engineering Materials. 452-453, 369-372. 2011 [DOI] [OATAO]
[ASCL18]S. Colin and G.L. Morini. 1st European Conference on Microfluidics - µFlu2008 10 to 12 December 2008, Bologna, Italy. Houille Blanche - Revue Internationale de l'Eau. (2)21. 2009
[ASCL19]S. Colin. Foreword. International Journal of Heat and Technology. 26(1)103. 2008
[ASCL20]S. Colin. Verrückte Fluide. Spektrum Der Wissenschaft. (1)46-51. 2004
[ASCL21]S. Colin. La physique des microécoulements. Pour La Science. (306)74-81. 2003

Communication invitée dans un congrès national ou international

[INV1]P. Longère, J. Wolf, J.-P. Crété and J.-M. Cadou. Combinaison X-FEM/CZM pour la modélisation numérique de la rupture ductile. GT MECAMAT - Physique, Mécanique et Modélisation de l'Endommagement et de la Rupture - Transition Endommagement-Rupture, Paris (France), 6 Oct. 2017 Invited lecture 2017
[INV2]Y. Gourinat. Les enjeux de la recherche au carrefour des Langues et de l’Aéro-Astronautique : témoignages et perspectives. Congrès de l'Association Nationale des Langues Étrangères Appliquées (ANLEA) Université de Toulouse II Jean Jaurès Invited lecture 2017
[INV3]S. Colin. Heat and mass transfer within gas flows in the slip flow regime. 2nd International MIGRATE Summer School, Sofia, Bulgaria Invited lecture 2017
[INV4]P. Longère. From dynamic shear localization until crack propagation in viscoplastic metals and alloys : a challenge for the modeling. ICACM 2017 - 10th Annual US-France ICACM Symposium on Dynamic damage and fragmentation, Ft Walton Beach (FL, USA), 17-19 May 2017 Invited lecture 2017
[INV5]Y. Gourinat. Technologie du supersonique & développement durable en parfaite Concorde. Une aventure présente & future. Conférence invitée Académie des Sciences, Inscriptions & Belles Lettres de Toulouse et URISMIP, Toulouse mars 2017 Invited lecture 2017
[INV6]J.-C. Passieux and J.-N. Périé. Finite Elements in Digital Image Correlation a tool for strengthening the experiment/simulation dialog. Mechanics of Materials and Construction Seminar, Vrije Universiteit Brussel Invited lecture 2017
[INV7]Y. Gourinat, M. Vellas and Y. Rolland. Biodynamics : a bridge between physicians & physicists. Invited presentation. Workshop Synergies between Civil Aviation and Surgery : A Human Enterprise Perspective, Texas Medical Center, Houston Invited lecture 2016
[INV8]J.-C. Passieux. Non-intrusive coupling in computational solid mechanics. CoMe Seminar Series, LaCàN, UPC, Barcelona. Invited lecture 2016
[INV9]J.-C. Passieux. Méthodes numériques en Corrélation d'Images Numériques éléments finis. Séminaire du DMS/Onera, Chatillon, Fr Invited lecture 2016
[INV10]P. Longère. Rupture dynamique par cisaillement adiabatique : enjeux de modélisation. Séminaire du GeM, Nantes (France), 5 juillet 2016 Invited lecture 2016
[INV11]S. Colin. Heat and mass transfer within gas flows in the slip flow regime. 1st International MIGRATE Summer School, Strasbourg, France Invited lecture 2016
[INV12]Y. Gourinat. Des Matériaux, des Structures & des Hommes. Conférence invitée au congrès national des chaudronniers, Compagnons du Devoir, Colomiers Mai 2016 Invited lecture 2016
[INV13]P. Longère. Adiabatic shear banding assisted dynamic failure : modeling issues . IUTAM - Symposium on Dynamic instabilities in solids , Madrid (Spain) , 17-20 May 2016 Invited lecture 2016
[INV14]J.-C. Passieux. Quelques outils numériques multiéchelles en mesure de champs par corrélation d’images numériques et en identification.. Séminaire du LMGC Montpellier Invited lecture 2016
[INV15]J.-C. Passieux. Apport des outils de calcul haute performance en Calcul de structures et en Corrélation d'Images Numériques.. Séminaire du LMT-Cachan Invited lecture 2015
[INV16]A. Dragon and P. Longère. Thermoplasticité dynamique incorporant le comportement post-critique en présence des Bandes de Cisaillement Adiabatique (BCA) et d’un endommagement associé. CAM 2015 - Congrès Algérien de Mécanique - Damage-Behavior coupling: From the initiation to the propagation of macroscopic cracks, El Oued (Algérie), 25/29 octobre 2015, Invited keynote lecture 2015
[INV17]P. Longère and A. Dragon. Rupture dynamique des matériaux structuraux : investigation expérimentale et éléments de modélisation. GDR CNRS ACO-CHOCOLAS - Endommagement et loi de comportement sous sollicitations dynamiques : Modélisation et expérimentation, Paris (France), 17-18 septembre 2015 Invited keynote lecture 2015
[INV18]A. Dragon and P. Longère. Enlarged finite strain modelling incorporating Adiabatic Shear Banding and post-localization microvoiding as shear failure mechanisms. ICDM2, Second International Conference on Damage Mechanics, Troyes (France), 8-11 july 2015 Invited lecture 2015
[INV19]Y. Gourinat. Vol de plus de 2 ans & pesanteur artificielle. Conférence invitée, 2ème Journée d’Étude Art & Espace - Topologie et espaces inconnus ou méconnus, LLA-CREATIS, UT2J Toulouse Invited lecture 2015
[INV20]P. Longère. Approches expérimentales et numériques du mécanisme de localisation dynamique par cisaillement adiabatique . Colloque national MECAMAT, Matériaux sous sollicitations intenses / Grandes vitesses fortes pressions : de l'impact à la planétologie, Aussois (France), 26-30 Janvier 2015 Invited keynote lecture 2015
[INV21]C. Barrot, S. Colin and N. Laurien. Banc de test pour pompes à insuline. Journée de l’Insulinotherapie, Paris Invited lecture 2014
[INV22]S. Colin. Experimental techniques in microfluidics. 14th UIT Summer School on Micro/Nano Scale Heat Transfer and Fluid Flow, Siena, Italy Invited lecture 2014
[INV23]A. Dragon and P. Longère. Thermoplasticité dynamique incorporant le comportement post-critique en présence des Bandes de Cisaillement Adiabatique (BCA). Colloque Mécanique théorique et applications en l'honneur d'Alain Cimetière, La Rochelle (France), 15-16 mai 2014 Invited lecture 2014
[INV24]P. Longère. Rupture par cisaillement quasi-statique et dynamique d’alliages métalliques haute résistance : investigation expérimentale et modélisation. Séminaire du LMS, Palaiseau (France), 25 avril 2014 Invited lecture 2014
[INV25]S. Colin. Gas microflows: what are the experimental needs and the associated challenges?. Colloquium on Opportunities and Challenges in Non-Continuum and Multiscale Fluid Dynamics, Warrington Invited keynote lecture 2013
[INV26]Y. Gourinat. L’École Doctorale AA - Une Recherche Transverse. Colloque Aerospace 2050 en l’honneur du Prof. Marc Pélegrin, AAE/GeorgiaTech/ISAE, Toulouse Invited lecture 2013
[INV27]Y. Gourinat. Dynamics of Space Structures & Living Systems at Clément Ader Institute. Invited Lecture, European Academy of Sciences Symposium Science & Aerospace in 21st century, EURASC Toulouse 2013 Invited plenary lecture 2013
[INV28]J.-C. Passieux. Quelques outils numériques multiéchelles et multi-modèles en mécanique numérique et expérimentale. Séminaire du CEA CESTA (Le Barp, Fr) Invited lecture 2013
[INV29]S. Colin, H. Si Hadj Mohand , F. Samouda, C. Barrot and A. Frezzotti. Velocity measurements in low pressure confined gas flow by molecular tagging velocimetry. 19th International Vacuum Congress (IVC-19), Paris, France Invited lecture 2013
[INV30]P. Longère and A. Dragon. Dynamic vs. quasi-static shear failure of high strength metallic alloys: experiment and modelling. IUTAM Symposium on materials and interfaces under high strain rate and large deformation, Metz (France), 17-21 Juin 2013 Invited lecture 2013
[INV31]Y. Gourinat. Habitacles en pesanteur artificielle minimale - Une voie possible pour les vols lointains. Conférence invitée, 1ère Journée d’Étude Art & Espace - Dispositifs artistiques dans la conception des systèmes spatiaux, LLA-CREATIS (EA 4152), UT2J Toulouse Invited lecture 2013
[INV32]J.-C. Passieux. Mesure de champs mécaniques à partir d'images numériques. Journée de la Recherche des 50ans de l'INSA de Toulouse (Toulouse, Fr) Invited lecture 2013
[INV33]S. Colin. Hydrodynamics and heat transfer in gaseous microflows: from theory to experiment. Ecole Thématique 2013 du GDR CHANT, Prapoutel les 7 Laux, France Invited lecture 2013
[INV34]M. Budinger and L. Brault. ACTUATION 2015, Model based design of electromechanical actuators. Design of complex dynamic systems, Modelica and FMI standards, 17 septembre 2013, Toulouse Invited lecture 2013
[INV35]L.A.G. Perini, J.-C. Passieux and J.-N. Périé. On the use of PGD to deal with large scale FE-based DIC problems. IUTAM Symposium on Advances of Optical Methods in Experimental Mechanics (Taipei, Taiwan) Invited lecture 2012
[INV36]J.-C. Maré. Historical evolution and challenges in aerospace actuation. Actuators 2012, Bremen, 18-20 June 2012 Invited keynote lecture 2012
[INV37]J.-S. Brest, V. Keryvin, P. Longère and Y. Yokoyama. Insight into plasticity mechanisms in metallic glasses by means of multiaxial and heterogeneous mechanical tests. ISMANAM 2012, 19th International Symposium on Metastable Amorphous and Nanostructured Materials, Moscou (Russie), 18/22 Juin 2012 Invited lecture 2012
[INV38]F. Samouda, S. Colin, C. Barrot, N. Laurien and J. Brandner . Towards Molecular Tagging Velocimetry in Rarefied Gas Flow Conditions. 28th International Symposium on Rarefied Gas Dynamics (RGD28), Zaragoza, Spain Invited lecture 2012
[INV39]M. Budinger, T. El Halabi and J.-C. Maré. Optimal preliminary design of electromechanical actuation systems. « More electrical » aircraft technologies, Symposium SPEC, November 8 & 9, 2011, Lyon. Invited lecture 2012
[INV40]S. Colin and G.L. Morini. Experimental techniques for the analysis of gaseous microflows. 4th International Conference on Heat Transfer and Fluid Flow in Microscale (HTFFM-IV), Fukuoka, Japan Invited keynote lecture 2011
[INV41]J.-C. Passieux, A. Gravouil, J. Réthoré and M.-C. Baietto. Direct estimation of generalized stress intensity factors using a multigrid XFEM. XFEM 2011-ECCOMAS thematic conference on eXtended Finite Element Methods (Cardiff, UK) Invited keynote lecture 2011
[INV42]S. Colin. Heat transfer in gas micro-flows. 3rd International GASMEMS Summer School, Bertinoro, Italy Invited lecture 2011
[INV43]J.-C. Maré. From CAD to Automated Design Process for the Preliminary Design of Actuators. SAE A-6 2011 Spring Meeting Symposium, Hamburg, Germany, May 9 -12 Invited keynote lecture 2011
[INV44]S. Colin. Experimental techniques for the analysis of gas microflows. 64th IUVSTA Workshop on Practical Applications and Methods of Gas Dynamics for Vacuum Science and Technology, Leinsweiler, Germany Invited keynote lecture 2011
[INV45]S. Colin. Gas microflows in the slip flow regime: a review on heat transfer. Proceedings of ASME 2010 8th International Conference on Nanochannels, Microchannels and Minichannels: Parts A and B Invited lecture p.383-396 2011 [DOI]
[INV46]Y. Gourinat. Dynamique des Voilures Tournantes. 2nd Day in Aerospace Medicine, groupe régional Médecine Aéronautique et Spatiale Toulouse Enseignement Recherche (MASTER), Toulouse Invited lecture 2010
[INV47]S. Colin. Microfluidics basics: rarefied gas microflows. Southeast Asian International Advances in Micro/Nano-Technology (SAIAM2010), Bangkok, Thailand Invited lecture 2010
[INV48]T. El Halabi, M. Budinger and J.-C. Maré. Optimal geometrical integration of electromechanical actuators , . OPTIMUS User Meeting 2010, Antwerp, 22 and 23 November 2010. Invited lecture 2010
[INV49]Y. Gourinat. Deux siècles de Mécanique. Symposium « L’aéronautique et l’espace, une chance pour l’avenir de la planète » for the centenary of Supaero, Toulouse centre de Congrès P.Baudis Invited lecture 2009
[INV50]Y. Gourinat. Dynamics of structures & biomechanical applications. Invited lecture, European Space Camp / Norwegian Space Agency, Andøya Rocket Range Invited lecture 2009
[INV51]S. Colin, C. Barrot, N. Laurien, S. Orieux and G. Bonvehi. Banc de test pour pompes à insuline. 1ère Journée de Présentation du Matériel d’Insulinothérapie par Pompe Portable, Paris Invited lecture 2009
[INV52]Y. Gourinat, J. Morlier, A. Shahdin and G. Michon. Dissipation & Endommagement au sein des Composites Minces. 4ème Séminaire Technique de Mécanique - Fatigue Vibratoire, Centre d'Essais Aéronautique de Toulouse Invited lecture 2009
[INV53]Y. Gourinat. Verne, Hergé, Von Braun : Du rêve à la réalité. Colloque “100 ans de Conquète Spatiale”, Académie Nationale des Sciences, Belles Lettres & Arts de Bordeaux, AAAF, Bordeaux Invited lecture 2007
[INV54]C. Espinosa, Y. De Lassat De Pressigny, P. Bordenave and L. Henke . Dynamic simulation of parachutes with fluid-structure interactions. Journée du GDR CNRS n°2902 "Interaction Fluide/Structure" Invited lecture 2006
[INV55]S. Colin. Gaseous microflows: various methods for modeling slip at the wall. Proceedings of Milieux Poreux et Transports Hydriques - 31èmes Journées GFHN Invited lecture p.1-14 2006
[INV56]S. Colin. Possibilities and limits of slip-flow models for gas microflows. Euromech Colloquium 472 on Microfluidics and Transfer Invited lecture 2005
[INV57]S. Colin. Rarefaction and compressibility effects on steady or transient gas flows in microchannels. Proceedings of ASME 2nd International Conference on Microchannels and Minichannels Invited keynote lecture p.13-24 2004 [DOI]
[INV58]S. Colin. Ecoulements liquides et gazeux dans les micro-conduites. Proceedings of Thermique et Microtechnologies, SFT 2003, Grenoble, France Invited lecture p.57-62 2003
[INV59]Y. Gourinat. Handicap & Aventure Spatiale. Health-Aventure-Medicine European Medical Conference, Montpellier Corum Invited lecture 2002
[INV60]Y. Gourinat. Cosmonaut training & applications. Invited lecture, European Space Camp / Norwegian Space Agency, Andøya Rocket Range Invited lecture 2002
[INV61]Y. Gourinat. F-Ma = 0 : The unique certitude in Aerospace ?. 3rd European Explicit Dynamic Conference, Paris Invited keynote lecture 2001 [OATAO]
[INV62]Y. Gourinat. Les enjeux de l’homme dans l’espace à l’aube du 21ème siècle. Invited Lect.for 2000 year symposium, University of Perpignan Invited lecture 2000
[INV63]Y. Gourinat. International & Regional Space Workshop. 10th UKSEDS Seminar, Bristol (UK) Invited lecture 1998
[INV64]Y. Gourinat. Expériences en Impesanteur Simulée pour Myopathes. 4ème Colloque du Groupe d’Étude & de Recherche en Médecine Manuelle Ostéopathique Montpellier, Balaruc Invited lecture 1997
[INV65]Y. Gourinat. Flambage dynamique. Proceedings of Journée Instabilité Structurale, Institut pour la Promotion des Sciences de l’Ingénieur, Paris Invited lecture p.IPSI Vol. XX n°3 1996

Communication avec actes dans un congrès international ou national

[ACT1]P. Schmollgruber, J. Bedouet, N. Bartoli, E. Bénard and Y. Gourinat. Improvement of the Aircraft Design process for Air Traffic Management evaluations. Proceedings of Accepted, SciTech2018, AIAA Aerospace Sciences Meeting, Kissimmee Jan.2018 2018
[ACT2]C. Espinosa, H. Bhoosnurmath, A. Carcel Lopez and F. Lachaud. Numerical Modelling of a Lightning Strike on a Protected Composite Panel. Proceedings of ICOLSE 2017 International Conference on Lightning and Static Electricity, 13-15 sept. 2017, Nagoya (J) 2017
[ACT3]C. Espinosa, T. Montel, J.F. Montes Pons, F. Lachaud and F. Soulas. A numerical study of the pressure applied on CFRP panels during a lightning strike using a coupled electro-thermal-mechanical model. Proceedings of ICOLSE 2017 International Conference on Lightning and Static Electricity, 13-15 sept. 2017, Nagoya (J) 2017
[ACT4]D. L'haridon, L. Chaudron, Y. Gourinat and A.-L. Marchand. To cope with unknown problems, performance and metacognition of collective decisions. Proceedings of Human Factors and Ergonomics Society (HFES) Europe annual conference 2017
[ACT5]M. Tirvaudey, R. Bouclier, J.-C. Passieux, L. Chamoin and C. Ha-minh. Méthode d’implémentation non intrusive de l’analyse isogéométrique dans un code élément fini. Proceedings of 23e Congrès Français de Mécanique, CFM 2017 p.1-7 2017
[ACT6]J. Serra, J.-E. Piérré, J.-C. Passieux, J.-N. Périé, C. Bouvet, B. Castanié and C. Petiot. The VERTEX program: complex loading and validation of aeronautic composite structures. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25 2017
[ACT7]F. Sanchez, M. Budinger and I. Hazyuk. Dimensional analysis and surrogate models for the thermal modelling of power electronic components. Proceedings of ELECTRIMACS 2017
[ACT8]S. Delbecq, M. Budinger, I. Hazyuk, F. Sanchez and J. Piaton. A framework for sizing embedded mechatronic systems during preliminary design. Proceedings of International Federation of Automatic Control World Congress 2017 [DOI]
[ACT9]F. Sanchez, M. Budinger, S. Delbecq and I. Hazyuk. Modelling and design approaches for the preliminary design of power electronic converters. Proceedings of ELECTRIMACS 2017
[ACT10]V. Rafik, A. Daidié and B. Combes. Numerical study of the screw-nut movement in the self-loosening process under transverses loading. Proceedings of 15e colloque national AIP-PRIMECA, La Plagne-Montalbert, France 2017
[ACT11]V. Rafik, C. Chirol, A. Daidié and B. Combes. Numerical modelling of the self-loosening of a boltd assembly. Proceedings of 11th International Conference on Advanced Computational Engineering and Experimenting ACE-X, Vienne, Autriche 2017
[ACT12]M. Vellas, C. Fualdes, Y. Rolland and Y. Gourinat. Ageing qualification rules for aeronautical monolithic composites. Proceedings of Canadian International Conference on Composites - CANCOM2017, Ottawa July 2017 2017
[ACT13]S. Ernane, C.J. Deschamps, M. Rojas-cárdenas, C. Barrot, L. Baldas and S. Colin. A comparison of mass flow rate experimental data obtained using two different experimental setups by means of the dynamic constant volume technique. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-150322 2017
[ACT14]D. Fratantonio, V. Yeachana, M. Rojas-cárdenas, C. Barrot and S. Colin. Acetone and diacetyl phosphorescence at low pressures for molecular tagging velocimetry in confined rarefied gas flows. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-154814 2017
[ACT15]J. Fu, J.-C. Maré, Y. Fu and L. Yu. Advanced Modeling and Simulation of Electromechanical Actuator for Flight Control System Based on Two Degrees of Freedom (2-DoF) Bond-Graph Method . Proceedings of AIAA Modeling and Simulation Technologies Conference, 2017 AIAA AVIATION Forum 2017 [DOI]
[ACT16]E. Bosco, A. Luchetti, S. Trapier , F. Di Vincenzo, N. Gourdain and J. Morlier. Wind-tunnel testing for validation of a method for nonlinear fluid/structure interaction using surrogate models. Proceedings of The International Forum on Aeroelasticity and Structural Dynamics (IFASD) 2017
[ACT17]N. Binti Mat Jali and P. Longère. Impact velocity-dependence of the fragmentation of shock-resistant PMMA . Proceedings of M2D2017, 7th International Conference on Mechanics and Materials in Design, Albufeira (Portugal), 11-15 June 2017 2017
[ACT18]F. Di Vincenzo, F. Mohd-zawawi and J. Morlier. Nonlinear aeroelastic steady simulation applied to highly flexible blades for MAV. Proceedings of The International Forum on Aeroelasticity and Structural Dynamics (IFASD) 2017
[ACT19]G. Manar and P. Longère. Comparative failure of AA2024 and AA7175 at low and high strain rate. Proceedings of M2D2017, 7th International Conference on Mechanics and Materials in Design, Albufeira (Portugal), 11-15 June 2017 2017
[ACT20]B. Attar and J.-C. Maré. Assessment of Electric Drive for Fuel Pump using Hardware in the Loop Simulation. Proceedings of The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden 2017
[ACT21]V. Yeachana, D. Fratantonio, M. Rojas-cárdenas, C. Barrot and S. Colin. Preliminary investigations on temperature dependency of acetone vapor luminescence for molecular tagging thermometry. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-153514 2017
[ACT22]G. Lopez Quesada, G. Tatsios, S. Colin, D. Valougeorgis, L. Baldas and M. Rojas-cárdenas. Reviewing the early stages of a Knudsen pump design: modeling and manufacturing. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-153802 2017
[ACT23]S. Rivallant, A. Gonzalez, F. Tostain and C. Espinosa. Study of debris generated during the crushing of CFRP laminates. Proceedings of AMAC 20èmes Journées Nationales sur les Composites (JNC20), EPCPT, 23-30 June 2017, Paris (FR) 2017
[ACT24]S. Wang, L. Baldas, S. Colin, S. Orieux, N. Laurien, A. Kourta, N. Mazellier and S. Loyer. Active flow control of ramp flow by fluidic oscillators. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-154498 2017
[ACT25]D. Mariuta, L. Baldas, J. Brandner, S. Le Calvé, S. Colin, P. Magaud and C. Barrot. Gas-liquid micro-separators for trapping of volatile organic compounds. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-154722 2017
[ACT26]G. Tatsios, G. Lopez Quesada, M. Rojas-cárdenas, L. Baldas, S. Colin and D. Valougeorgis. Thermally driven flows in long tapered channels. Proceedings of 2nd International MIGRATE Workshop, Sofia, Bulgaria p.MIGRATE-152927 2017
[ACT27]P. Schmollgruber, N. Bartoli, J. Bedouet, S. Defoort, Y. Gourinat and E. Bénard. Use of a Certification Constraints Module for Aircraft Design Activities. Proceedings of 17th AIAA Aviation Technology, Integration & Operations Conference, Denver CO 2017
[ACT28]S.A. Chelaghma, O. De Almeida, J.-N. Périé, P. Marguerès, B. Reine, A. Vinet and J.-C. Passieux. Etude de la morphologie cristalline et modélisation de la cinétique du PEKK (Poly-Ether- Cétone-Cétone). Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-4 2017
[ACT29]J. Serra, J.E. Pierré, J.N. Périé, J.C. Passieux, C. Bouvet and B. Castanié. Modélisation d’essais structuraux sur plaques entaillées. Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-9 2017
[ACT30]J. Serra, J.E. Pierré, J.-N. Périé, J.-C. Passieux, C. Bouvet and B. Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-7 2017
[ACT31]M. Toniolli, R. Bouclier, S. Guinard and J.-C. Passieux. Couplage non-intrusif d’un modèle global coque et de modèles locaux solides 3D non-linéaires pour la simulation d’aérostructures. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-5 2017
[ACT32]R. Bouclier, J.-C. Passieux and J.-N. Périé. Une méthode de couplage de domaines pour la mesure de champs par corrélation d’images numériques éléments finis. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-8 2017
[ACT33]S. Dubreuil, J. Mas-colomer, M. Salaün, N. Bartoli and T. Lefebvre. Évaluation de l’incertitude associée à l’interpolation de maillage dans un calcul couplé partitionné. Proceedings of CSMA 2017 - 13ème Colloque National en Calcul des Structures - Giens (France), Mai 2017
[ACT34]T. Legaud, E. Grippon, P.-L. Lapoujade, P.-L. Chiambaretto, S.-K. Nguyen, Y. Gourinat and V. Fascio. Discrete Element Modelling of a metamaterial for launcher tanks dynamic experiments. Proceedings of LS-DYNA 11th European Conference, Salzburg 2017
[ACT35]M. Rojas-cárdenas, E. Silva, C. Deschamps, M.-T. Ho and I. Graur. Exponential Relaxation with Time of Pressure for Conductance and Mass Flow Rate Measurements of Gas at Arbitrary Rarefaction Conditions. Proceedings of 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 12-15 June, 2017, Iguazu Falls, Brazil 2017
[ACT36]H.L. Dorothy and P. Longère. Modélisation isotrope vs. anisotrope du processus de dégradation dynamique par cisaillement adiabatique. Proceedings of CSMA2017, 13ème Colloque National en Calcul des Structures, Giens (France), 15-19 mai 2017 2017
[ACT37]J. Wolf, J.-P. Crété, P. Longère and J.-M. Cadou. Transition endommagement diffus vers fissuration par introduction d’une bande cohésive dans X-FEM. Proceedings of CSMA2017, 13ème Colloque National en Calcul des Structures, Giens (France), 15-19 mai 2017 2017
[ACT38]M. Lemaire and Y. Gourinat. Conception & analyse des structures avec modélisation des incertitudes. Proceedings of 10èmes Entretiens de Toulouse, AAE - Collège de Polytechnique 2017
[ACT39]L. Barrière, O. Cherrier, J.-C. Passieux, M. Bouquet and J.-F. Ferrero. 3D Digital Image Correlation applied to birdstrike tests. Proceedings of iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA p.17-20 2017 [DOI] [HAL]
[ACT40]A. Chiplunkar and J. Morlier. Operational Modal Analysis in Frequency Domain using Gaussian Mixture Models . Proceedings of IMAC XXXV, Structural Dynamics Challenges in Next Generation Aerospace Systems, USA 2017
[ACT41]S. Delbecq, F. Tajan, M. Budinger, J.-C. Maré and F. Sanchez. A framework for the conceptual and preliminary design of embedded mechatronic systems. Proceedings of International Workshop on Aircraft System Technologies 2017
[ACT42]S. Delbecq and M. Budinger. A framework for the conceptual and preliminary design of aircraft equipments. Proceedings of More Electrical Aircraft 2017
[ACT43]A. Batikh, L. Baldas and S. Colin. Application of active flow control on aircrafts - state of the art. Proceedings of 6th International Workshop on Aircraft System Technologies (AST 2017), Hamburg, Germany 2017
[ACT44]J. Mas Colomer, N. Bartoli, T. Lefebvre, S. Dubreuil, J.R.R. Martins, E. Benard and J. Morlier. Similarity Maximization of a Scaled Aeroelastic Flight Demonstrator via Multidisciplinary Optimization. Proceedings of 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Grapevine, Texas 2017 [DOI]
[ACT45]S. Chelaghma, O. De Almeida, P. Marguerès, J.-C. Passieux, J.-N. Périé, B. Reine and A. Vinet. Edude de la morphologie cristalline du PEKK et caractérisation de la cinétique de cristallisation des composites à matrice PEKK.. Proceedings of JST AMAC - Mise en OEuvre des Composites à Matrice Thermoplastique 2017
[ACT46]T. Hirschler, A. Duval, R. Bouclier, D. Crozes, T. Elguedj and J. Morlier. Analyse Isogéométrique pour les problèmes d'Optimisation de Forme des Structures Coques. Proceedings of CSMA2017 2017
[ACT47]G. Raze, M. Charlotte and J. Morlier. Optimisation Topologique sans Maillage - Vers la reconnaissance d'éléments structuraux. Proceedings of CSMA 2017 2017
[ACT48]N. Bartoli, T. Lefevbre, N. Bons, M. Bouhlel, S. Dubreuil, R. Olivanti, J.R.R. Martins and J. Morlier. An adaptive optimization strategy based on mixture of experts for wing aerodynamic design optimization. Proceedings of AIAA AVIATION Forum 5-9 June 2017, Denver, Colorado 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2017 [DOI]
[ACT49]P.-J. Barjhoux, Y. Diouane, S. Grihon, D. Bettebghor and J. Morlier. Mixed variable Structural optimization: toward an efficient hybrid algorithm. Proceedings of WCSMO12 12th World Congress of Structural and Multidisciplinary Optimisation 5 - 9 June 2017, Braunschweig, Germany 2017
[ACT50]D. Fratantonio, H. Si Hadj Mohand, M. Rojas-cárdenas, C. Barrot, N. Laurien and S. Colin. Molecular tagging velocimetry for confined rarefied gas flows: phosphorescence emission at low pressure. Proceedings of 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 12-15 June, 2017, Iguazu Falls, Brazil 2017
[ACT51]S. Coniglio, C. Gogu, R. Amargier and J. Morlier. Pylon and engine mounts performance driven structural topology optimization. Proceedings of WCSMO12 12th World Congress of Structural and Multidisciplinary Optimization 5 - 9 June 2017, Braunschweig, Germany 2017
[ACT52]E. Marenic, D. Brancherie and M. Bonnet. Asymptotic analysis based modeling of small inhomogeneity perturbation in solids: two computational scenarios. Proceedings of IV ECCOMAS Young Investigator Conferenc 2017
[ACT53]A. Chiplunkar, E. Bosco and J. Morlier. Gaussian Process for Aerodynamic Pressures Prediction in Fast Fluid Structure Interaction Simulations. Proceedings of WCSMO12 12th World Congress of Structural and Multidisciplinary Optimisation 5 - 9 June 2017, Braunschweig, Germany 2017
[ACT54]E. Marenic, D. Brancherie and M. Bonnet. Asymptotic analysis for criticality assessment of defects in mechanical structures. Proceedings of 13ème Colloque National en Calcul des Structures 2017
[ACT55]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage d'un CMC oxyde/oxyde. Proceedings of JNC20 2017
[ACT56]J. Fu, J.-C. Maré and Y. Fu. Incremental Modeling and Simulation of Mechanical Power Transmission for More Electric Aircraft Flight Control Electromechanical Actuation System Application. Proceedings of ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE), Phoenix, AZ, United States; 11–17 November p.V001T03A040 2016 [DOI]
[ACT57]R. Bouclier, J.-C. Passieux and M. Salaün. On the development of a non-intrusive coupling strategy for NURBS local modeling. Proceedings of Isogeometric Analysis and Meshfree Methods - San Diego (CA, USA), Octobre 2016
[ACT58]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage de composites à matrice céramique oxyde/oxyde. Proceedings of Journées Annuelles SF2M - 25-27 Octobre - Albi 2016
[ACT59]F. Sanchez and S. Delbecq. Surrogate modeling technique for the conceptual and preliminary design of embedded systems and components. Proceedings of International Council of Aeronautical Sciences 2016
[ACT60]V. Bonnot, Y. Landon and S. Segonds. Tool/Material Interferences Sensibility to Process and Tool Parameters in Vibration- Assisted Drilling. Proceedings of International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing JCM, Catania, Italy 2016
[ACT61]G. Michon, G. Aridon, E. Gourc, L. Dell'Ecle, G. Kerschen and A. Hot. Experimental analysis of linear vibration absorbers for an uncertain main structure.. Proceedings of ECSSMET 2016
[ACT62]P.-L. Chiambaretto, M. Charlotte, J. Morlier, P. Villedieu and Y. Gourinat. Vibrational test bench of a grain filled tank in view of cryogenic tank tests. Proceedings of 14th European Conference on Spacecraft Structures, Materials & Environmental Testing (ECSSMET 14) Toulouse 2016
[ACT63]V. Achard, A. Daidié, M. Paredes and C. Chirol. Numerical modelling of the cold expansion process in mechanical stacked assemblies. Proceedings of International Joint Conference on Mechanical Design Engineering & Advanced Manufacturing (JCM2016) p.501-508 2016 [DOI]
[ACT64]R. Thanwerdas, E. Rodriguez, A. Daidié, M. Heim and C. Fabries. Industrial Equivalent Modelling of a Screw Assembly Subjected to a Thermal Load. Proceedings of 14e European Conference on Spacecraft Structures, Materials and Environmental Testing (ECSSMET) p.1-15 2016
[ACT65]R. Thanwerdas, E. Rodriguez and A. Daidié. Stiffness and slip laws for threaded fasteners subjected to a transversal load. Proceedings of International Joint Conference on Mechanical Design Engineering & Advanced Manufacturing (JCM2016) p.517-526 2016 [DOI]
[ACT66]D. Fratantonio, H. Si Hadj Mohand, N. Laurien, C. Barrot, M. Rojas-cárdenas and S. Colin. Vélocimétrie par marquage moléculaire appliquée aux écoulements gazeux raréfiés. Proceedings of 15ème Congrès Francophone de Techniques Laser (CFTL2016), Toulouse, France 2016
[ACT67]H. Si Hadj Mohand, A. Frezzotti, S. Colin, C. Barrot and D. Fratantonio. Méthode de reconstruction de profils de vitesse pour l’analyse expérimentale de micro-écoulements gazeux par marquage moléculaire. Proceedings of 15ème Congrès Francophone de Techniques Laser (CFTL2016), Toulouse, France 2016
[ACT68]D. Qiu, S. Seguy and M. Paredes. A novel design of cubic stiffness for a Nonlinear Energy Sink (NES) based on conical spring. Proceedings of International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing,14-26 septembre 2016, Catane, Italie, p.565-573 2016
[ACT69]O. Lefrançois, N. Matton, M. Causse and Y. Gourinat. The role of Pilots' monitoring strategies in flight performance. Proceedings of 32nd EAAP Conference (European Association for Aviation Psychology), Cascais 2016
[ACT70]E. Grippon, T. Légaud, P.-L. Chiambaretto, V. Fascio, Y. Gourinat and V. Lapoujade. Guidelines of a metamaterial for launcher tank dynamic experiment. Proceedings of 14th European Conference on Spacecraft Structures, Materials & Environmental Testing (ECSSMET14) Toulouse 2016
[ACT71]J. Fu, Y. Fu and J.-C. Maré. Special considerations to thermal behavior modeling and simulation of an aerospace electromechanical actuation system. Proceedings of 30th Congress of the International Council of the Aeronautical Sciences (ICAS), Daejeon, Korea; 25-30 September 2016
[ACT72]G. Tatsios, D. Valougeorgis, J. Chen, L. Baldas, S. Colin and S. Stefanov. Parametrization study of the thermally driven rarefied flow between saw-tooth like surfaces. Proceedings of 5th Micro and Nano Flows Conference, Milano, Italy 2016
[ACT73]P. Longère, A. Dragon and H.L. Dorothy . Modelling of shear failure caused by adiabatic shear banding and subsequent microvoiding. Proceedings of ICTAM 2016, 24th International Congress of Theoretical and Applied Mechanics, Montréal (Canada), 21-26 august 2016 2016
[ACT74]E. Silva, M. Nicoluzzi, M. Rojas-cárdenas and C. Deschamps. Analysis of Viscous Slip at the Wall in Gas Flows of R134a and R600a through Metallic Microtubes. Proceedings of 23nd International Compressor Engineering Conference at Purdue, West Lafayette, USA p.1355 2016
[ACT75]N. Bartoli, I. Kurek, R. Lafage, T. Lefebvre, R. Priem , M. Bouhlel, J. Morlier, V. Stilz and R. Regis. Improvement of efficient global optimization with application to aircraft wing design . Proceedings of 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2016 [DOI]
[ACT76]A. Chiplunkar, E. Rachelson, M. Colombo and J. Morlier. Adding Flight Mechanics to Flight Loads Surrogate Model using Multi-Output Gaussian Processes. Proceedings of 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2016 [DOI]
[ACT77]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Displacement and rotation fields measurement using Finite Element Stereo Digital Image Correlation. Proceedings of 17th International Conference on Experimental Mechanics, ICEM17 (Rhodes, Greece) 2016
[ACT78]C. Coïc, J. Fu and J.-C. Maré. Bond Graphs Aided development of Mechanical Power Transmission for Aerospace Electromechanical Actuators. Proceedings of International Conference on Bond Graph Modeling and Simulation (ICBGM), Montreal, QC, Canada; 24-27 July p.221-228 2016
[ACT79]F. Baudoin, S. Le Roy, G. Teyssedre, C. Laurent, I. Alhossen, F. Bugarin, S. Segonds and N. Binaud. Parameters sensitivity analysis in charge transport model using Sobol indexes for optimization purpose. Proceedings of IEEE International Conference on Dielectrics 2016 [DOI]
[ACT80]J. Wolf, P. Longère, J.-M. Cadou and J.-P. Crété. Numerical modelling of the damage-to-fracture transition in a ductile material. Proceedings of IRF 2016, 5th International Conference on Integrity - Reliability - Failure, Porto (Portugal), 24-28 july 2016 2016
[ACT81]B. Perin, C. Espinosa, R. Blois and P. Bordenave. Experimental and Numerical Investigation of the Tearing Resistance of a Parachute Woven Fabric using LS-Dyna. Proceedings of 14th International LS-DYNA Users Conference June 2016 2016
[ACT82]T. Legaud, E. Grippon, V. Lapoujade, Y. Gourinat and P.-L. Chiambaretto. Application of the Discrete Elements Method to frequency analysis and use of the “bond” method for fracture modeling. Proceedings of 14th International LS-DYNA Conference, Detroit 2016
[ACT83]S. Dubreuil, N. Bartoli, C. Gogu and T. Lefebvre. Multidisciplinary optimization by surrogate models: handling epistemic uncertainties by polynomial chaos expansion. Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) 5-10th June 2016 2016
[ACT84]C. Coïc and J.-C. Maré. Modeling and PreSizing Process for Hydrostatic Thrust Bearing with Special Consideration to Performance Robustness Within a Wide Temperature Range. Proceedings of 23rd International Conference on Hydraulics and Pneumatics, 1-3 June, Prague (keynote opening) p.3-14 2016
[ACT85]V. Yeachana, C. Barrot and S. Colin. Micro molecular tagging thermometry. Proceedings of 1st International MIGRATE Workshop, Strasbourg, France p.MIGRATE 13: 1-2 2016
[ACT86]G. Lopez Quesada, S. Colin, D. Valougeorgis, G. Tatsios, L. Baldas and M. Rojas-cárdenas. Overview of alternative designs for thermally driven micropumps. Proceedings of 1st International MIGRATE Workshop, Strasbourg, France p.MIGRATE 12: 1-2 2016
[ACT87]D. Fratantonio, M. Rojas-cárdenas, S. Colin and C. Barrot. Acetone luminescence at low pressure for molecular tagging velocimetry in confined rarefied gas flows. Proceedings of 1st International MIGRATE Workshop, Strasbourg, France p.MIGRATE 11: 1-2 2016
[ACT88]J.-E. Pierré, J.-C. Passieux and J.-N. Périé. Finite Element Stereo Digital Image Correlation Measurement for a Plate Model. Proceedings of SEM XIII International Congress, Orlando, Floride p.199-202 2016 [DOI]
[ACT89]C. Espinosa, F. Tostain and S. Rivallant. Stabilization of the numerical priming to stabilization phenomenon in the crushing of a composite panel using local and diffuse damage laws. Proceedings of VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) 2016
[ACT90]J.-C. Passieux, R. Bouclier and J.-N. Périé. DD-DIC : a parallel finite element based digital image correlation solver. Proceedings of SEM XIII International Congress, Orlando, Floride p.55-59 2016 [DOI]
[ACT91]F. Tostain, P. Guillén Ulecia, L. Fúster Alfonso, S. Rivallant and C. Espinosa. Experimental investigation of crushed composite plates under static and dynamic loads. Proceedings of ICILSM 2016 - 1st International Conference on Impact Loading of Structures and Materials, Turin, Italie, 22-26 May 2016
[ACT92]D. Qiu, S. Seguy and M. Paredes. Design of cubic stiffness for the absorber of Nonlinear Energy Sink (NES). Proceedings of XXth Symposium VIbrations, SHocks and NOise VISHNO, 11-15 avril 2016, Le Mans, France p.2295-2300 2016
[ACT93]Y. Gourinat and J. Morlier. Le diagnostic structural opérationnel : quels verrous, quels enjeux, quelles perspectives ?. Proceedings of Entretiens de Toulouse, Académie de l’Air & de l’Espace - Collège de Polytechnique 2016
[ACT94]F. Sanchez, A.-K. Koschlik, M. Budinger and I. Hazyuk. Dimensional analysis and surrogate modelling technique for the sizing of actuation systems. Proceedings of Recent Advances in Aerospace Actuation Systems and Components p.158-165 2016
[ACT95]C. Coïc, R. Byzery, T. Marger and J.-M. Allietta. Optimization of the Actuation System Sizing of a New Helicopter base on Global Modeling Approach. Proceedings of International Conference on Recent Advances in Aerospace Actuation Systems and Components p.15-20 2016
[ACT96]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT97]L. Bernard, B. Castanié and G. Michon. Dynamic bending-twisting coupling of an horizontally graded CFRP sandwich beam. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT98]G. Pennisi, C. Stéphan and G. Michon. Vibro-Impact NES: A Correlation Between Experimental Investigation and Analytical Description. Proceedings of IMAC 2016 2016 [DOI]
[ACT99]E. Gourc, L. Dell'Elce, G. Kerschen, G. Michon, G. Aridon and A. Hot. Performance Comparison Between a Nonlinear Energy Sink and a Linear Tuned Vibration Absorber for Broadband Control. Proceedings of IMAC 2016 2016 [DOI]
[ACT100]P.-L. Chiambaretto, M. Charlotte, P. Villedieu, J. Morlier and Y. Gourinat. Surrogate granular materials for modal test of fluid filled tank. Proceedings of IMAC-XXXIV, Orlando jan 2016 2016
[ACT101]E. Bosco, A. Lucchetti, S. Trapier, F. Di Vincenzo, N. Gourdain and J. Morlier. Nonlinear transient Fluid/Structure interaction approach using surrogate models: Industrial application to aircraft fairing vibration excited by engine efflux. Proceedings of AIAA SciTech 2016 2016 [DOI]
[ACT102]S. Wang, L. Baldas, S. Colin, S. Orieux, A. Kourta and N. Mazellier. Experimental and Numerical Study of the Frequency Response of a Fluidic Oscillator for Active Flow Control. Proceedings of 8th AIAA Flow Control Conference, Washington, USA 2016 [DOI]
[ACT103]Y. Gao, P. Magaud, L. Baldas, C. Lafforgue, M. Abbas, P. Schmitz and S. Colin. Trains of particles in finite-Reynolds-number micro square flow. Proceedings of 5th Micro and Nano Flows Conference, Milano, Italy 2016
[ACT104]V. Pommier-Budinger, Y. Bury, G. Michon and G. Napias. In-Flight PIV for CROR Flight Test Demonstration. Proceedings of 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference Washington, D.C. Read More: http://arc.aiaa.org/doi/abs/10.2514/6.2016-3404 2016 [DOI]
[ACT105]J. Chen, M. Rojas-cárdenas, L. Baldas, S. Colin and C. Barrot. Measurement of thermal transpiration flow through a microtube. Proceedings of 5th Micro and Nano Flows Conference, Milano, Italy 2016
[ACT106]A. Chiplunkar, E. Rachelson, M. Colombo and J. Morlier. Sparse Physics-Based Gaussian Process for Multi-output Regression using Variational Inferenc. Proceedings of ICPRAM 2016 2016
[ACT107]E. Silva, M. Rojas-cárdenas and C.J. Deschamps. Tangential Momentum Accommodation Coefficient Measurements of Tetrafluoroethane in Metallic Microtubes. Proceedings of 2nd European Conference on Non-Equilibrium Gas Flows | Eindhoven, the Netherlands 2015
[ACT108]M. Spiga, P. Vocale, G.L. Morini and S. Colin. Shear work contribution to convective heat transfer of dilute gases in slip flow regime. Proceedings of 2th European Conference on Non-equilibrium Gas Flows (NEGF15), Eindhoven, the Netherlands p.35-44 2015
[ACT109]J. Chen, S. Stefanov, L. Baldas, S. Colin, C. Barrot and M. Rojas-cárdenas. Investigation of temperature-driven flow between ratchet surfaces. Proceedings of 2th European Conference on Non-equilibrium Gas Flows (NEGF15), Eindhoven, the Netherlands p.101-109 2015
[ACT110]A. Hamdi, F. Neveu, A. Daidié and P. Stephan. Développement d’outils pour la conception préliminaire des assemblages métalliques. Proceedings of Conférence Internationale de Construction Métallique et Mixte CICOMM’2015, Tlemcen, Algérie 2015
[ACT111]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit, Y. Duval and I. Revel. Approximation of a lightning test by a mechanical impact one : from equivalence criterion based on deflection to mechanical modelling of core damage and delamination. Proceedings of 2015 International Conference on Lightning and Static Electricity (ICOLSE) 2015
[ACT112]F. Tostain, C. Espinosa and S. Rivallant. Crushing of aeronautical composite absorbers using canonical and phenomenological ruin criteria. Proceedings of V ECCOMAS Thematic Conference on the Mechanical Response of Composites, Bristol, UK, 7-9 September 2015
[ACT113]F. Soulas, B. Lepetit, C. Espinosa, F. Lachaud, S. Guinard, J. Duval and I. Revel. How to define a mechanical impact equivalent to a lightning strike. Proceedings of 2015 International Conference on Lightning and Static Electricity (ICOLSE) 2015
[ACT114]P. Schmollgruber, N. Bartoli and Y. Gourinat. Development of a certification module tailored to Aircraft Multi Disciplinary Optimization. Proceedings of 5th CEAS European Air & Space Conference, Delft Sept.2015 2015
[ACT115]P. Longère, E. Roux, O. Cherrier, T. Millot, D. Capdeville and J. Petit. Digital Image Analysis of ASB-assisted Failure of Impacted Structural Materials. Proceedings of DYMAT 2015, 11th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Lugano (Suisse), 7/11 Septembre 2015 2015
[ACT116]J. Fu, I. Hazyuk and J.-C. Maré. Preliminary Design Rules for Electromechanical Actuation Systems –Effects of Saturation and Compliances. Proceedings of 5th European Air and Space Conference, Delft, Netherlands; 7-11 September p.1-14 2015
[ACT117]Y. Wang, C. Gogu, N. Binaud and C. Bes. Predicting remaining useful life by fusing SHM data based on Extended Kalman filter. Proceedings of 25th European Safety and Reliability Conference, Zurich, Switzerland, 7-10th September 2015
[ACT118]T. Li, S. Seguy, A. Berlioz and E. Gourc. Analysis of a vibro-impact nonlinear energy sink: theoritical and numerical developments. Proceedings of 22ème Congrès Français de Mécanique, 24-28 août 2015, Lyon, France 2015
[ACT119]J. Fu, J.-C. Maré, Y. Fu and X. Han. Incremental Modelling and Simulation of Power Drive Electronics and Motor for Flight Control Electromechanical Actuators Application. Proceedings of IEEE International Conference on Modelling and Automation, Beijing, China; 2-5 August p.1319-1325 2015 [DOI]
[ACT120]J.F. Pafume-coelho, L. Sanches, E. Gourc and G. Michon. Couplage aéroélastique flexion-torsion de pale d’hélicoptère. Proceedings of Congrès Français de Mécanique, Lyon, France 2015
[ACT121]V. Achard, C. Bouvet and B. Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. Proceedings of 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015 2015
[ACT122]T. Millot, M. Le Thuaut and P. Longère. Use of Titanium alloys for shock oriented marine applications. Proceedings of Ti-2015: The 13th World Conference on Titanium, San Diego, California (USA), 16-20 Août 2015 2015
[ACT123]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Stéréo Corrélation d’Images Numériques et Régularisation Mécanique. Proceedings of CFM, Congrès Français de Mécanique, 24-28 August, Lyon, FR 2015
[ACT124]Y. Wang, C. Gogu, N. Binaud and C. Bes. Comparing structural airframe maintenance strategies based on probabilistic estimates of the remaining useful service life. Proceedings of 22ème Congrès Français de Mécanique, Lyon, 24-28 Août 2015
[ACT125]C. Gogu. On the fly construction of reduced order models for topology optimization. Proceedings of 11th World Congress on Structural and Multidisciplinary Optimization, Sydney, Australia, 7-12th June 2015
[ACT126]C. Chen, L. Michel, C. Espinosa and F. Lachaud. Simulation d'impact de composites stratifiés et effets de l'environnement. Proceedings of Proceedings of JNC19, Journées Nationales sur les Composites, Lyon, 29 Juin- 1er Juillet 2015
[ACT127]B. Castanié, A. Daidié, C. Bouvet, V. Achard and L. Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France 2015
[ACT128]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit and I. Revel. Endommagement des structures composites soumises à l’impact foudre. Proceedings of Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet 2015 2015
[ACT129]L. Bernard, G. Michon, B. Castanié, R. El Fatmi, V. Negre and D. Reveillon. Analyse Dynamique et Statique du Couplage Flexion-Torsion d’une Poutre Sandwich. Proceedings of JNC 19, Journées Nationales sur les Composites, Lyon, France 2015
[ACT130]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit and I. Revel. Equivalent impact set-up for lightning strike damage on composite coupons. Proceedings of ICCM20, 20th International Conference on Composite Materials, Copenhagen (Danmark), 19-24th July 2015
[ACT131]A. Hamdi, F. Neveu, A. Daidié, P. Stéphan and T. Bernicot. Développement d’un modèle de calcul semi-analytique de brides cylindriques boulonnées sollicitées en chargement fortement excentré. Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. SUPMECA, Saint-Ouen 2015
[ACT132]A. Baltzinger, A. Cayla, C. Espinosa, S. Perraud and C. Campagne. Ageing behavior of polyamide 6-6 parachute fabric in stratosphere and troposphere balloons systems. Proceedings of 15th Association of Universities for Textiles World Textile Conference (AUTEX 2015) ; june 2015 Bucarest (Roumanie) 2015
[ACT133]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Méthode de Stéréo Corrélation d'Images Numériques régularisée par une cinématique plaque. Proceedings of JNC 19, Lyon, FR 2015
[ACT134]I. Viana, F. Bugarin, N. Cornille and J.-J. Orteu. CAD-guided inspection of aeronautical mechanical parts using monocular vision. Proceedings of 12th International Conference on Quality Control by Artificial Vision (QCAV’2015), Le Creusot (France), 3-5 June 2015 2015 [DOI] [HAL]
[ACT135]E. Piollet, G. Michon and A. Ross. Transient response of a sandwich structure damped with a fibrous core material. Proceedings of CANCAM, London, ON, Canada 2015
[ACT136]E. Gnesi, J.-C. Maré and J.-L. Bordet. Modeling and simulation of thermal-hydraulic coupling in electro-hydrostatic modules involving fixed-displacement vane pumps. Proceedings of Fourteenth Scandinavian International Conference on Fluid Power, Tampere, Finland, May 20-22 2015
[ACT137]P. Schmollgruber, N. Bartoli and Y. Gourinat. Virtual flight testing in an aircraft sizing and optimization process. Proceedings of 15th AIAA Aviation Technology, Integration, and Operations Conference. The American Institute of Aeronautics and Astronautics (AIAA), Dallas June 2015 2015
[ACT138]L. Bernard, G. Michon, B. Castanié, V. Negre and D. Reveillon. Static and Dynamic Analysis of Bending-Torsion Coupling of a CFRP Sandwich Beam. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT139]V. Achard, C. Bouvet and B. Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT140]M. Soilahoudine, C. Gogu and C. Bes. Réduction drastique des temps de calculs pour l’optimisation globale à base de métamodèles par réduction de modèles. Proceedings of 12eme Colloque National en Calcul des Structures, Giens, 18-22 Mai 2015
[ACT141]C. Gogu. Une méthode par résolution en base réduite pour augmenter l’efficacité de l’optimisation topologique des structures. Proceedings of 12eme Colloque National en Calcul des Structures, Giens, 18-22 Mai 2015
[ACT142]S. Dubreuil, M. Salaün, E. Rodriguez and F. Petitjean. Superposition modale probabiliste : identification de la loi jointe des valeurs propres et paramètres effectifs par la théorie des copules. Proceedings of CSMA 2015 - 12ème Colloque National en Calcul des Structures - Giens (France), Mai 2015 [OATAO]
[ACT143]R. Bouclier, J.-C. Passieux, M. Salaün and P. Laborde. Enrichissement local de modèles NURBS par couplage non intrusif avec des éléments finis classiques. Proceedings of CSMA 2015 - 12ème Colloque National en Calcul des Structures - Giens (France), Mai 2015 [HAL] [OATAO]
[ACT144]M. Duval, J.-C. Passieux and M. Salaün. Couplage non-intrusif: réanalyse locale et calcul haute performance. Proceedings of CSMA 2015 - 12ème Colloque National en Calcul des Structures - Giens (France), Mai 2015 [HAL] [OATAO]
[ACT145]L. Amar, M. Chrust, E. Laurendeau and G. Michon. Unsteady Vortex Lattice Method of an Aeroelastic Airfoil with Aileron Structural Non- Linearities. Proceedings of CASI Aeronautics Conference, Montréal, QC, Canada 2015
[ACT146]E. Roux, P. Longère and T. Millot. Analyse numérique d'une séquence d'images ultra-rapides : application à la fissuration dynamique de structures impactées. Proceedings of CSMA2015, 12ème Colloque National en Calcul des Structures, Giens (France), 18-22 mai 2015 2015
[ACT147]F. Tostain, C. Espinosa and S. Rivallant. Absorption d’énergie: un modèle de fragmentation diffuse et localisée pour le crash de composite carbone/epoxy. Proceedings of CSMA - 12ème Colloque National en Calcul des Structures, Giens, France, 18-22 mai 2015
[ACT148]O. Ksentini, B. Combes, M.S. Abbes, A. Daidié and M. Haddar. Etude dynamique du dévissage spontané d’un assemblage soumis à des vibrations. Proceedings of 14e colloque national AIP-PRIMECA, La Plagne-Montalbert, France 2015
[ACT149]R. Thanwerdas, E. Rodriguez, A. Daidié and P. Guy. Vers une industrialisation du modèle de frottement dynamique de LuGre. Application à des essais de glissement statiques en condition de frottement sec. Proceedings of 14e colloque national AIP-PRIMECA, La Plagne-Montalbert, France 2015
[ACT150]J.F. Pafume-coelho, G. Michon, L. Sanches and E. Gourc. Dynamic vibration absorbers for ground resonance control in hinged rotor helicopters. Proceedings of XVII International Symposium on Dynamic Problems of Mechanics, Natal, RN, Brazil 2015
[ACT151]E. Gourc, L. Sanches, G. Michon and V. Steffen Jr.. Post critical analysis of helicopter ground resonance. Proceedings of XVII International Symposium on Dynamic Problems of Mechanics, Natal, RN, Brazil 2015
[ACT152]J.-C. Maré. Best practices in system-level virtual prototyping - application to mechanical transmission in electromechanical actuators. Proceedings of Aircraft Systems Technolology, Hamburg, Germany, 23-25 February 2015
[ACT153]H. Liu, D. Leray, S. Colin and P. Pons. Finite element modeling of nickel oxide film for Au-Ni contact of MEMS switches. Proceedings of 61st IEEE Holm Conference on Electrical Contacts, San Diego, USA p.266-272 2015 [DOI]
[ACT154]T. Benhaddou, A. Daidié, P. Stephan, C. Chirol and J.-B. Tuery. Optimization of fatigue behavior of metallic shear joints. Proceedings of 12th International Conference on the Mechanical Behavior of Materials, ICM12, Karlsruhe, Germany 2015
[ACT155]Y. Gao, P. Magaud, L. Baldas, C. Lafforgue-Baldas, M. Abbas, P. Schmitz and S. Colin. Lateral migration of particles in square micro-channels at low flow inertia. Proceedings of 4th European Conference on Microfluidics (µFlu'14), Limerick, Ireland p.μFLU14-97:1-8 2014
[ACT156]J. Chen, S. Colin, L. Baldas and C. Barrot. Numerical investigation of a novel Knudsen pump with two ratchet surfaces. Proceedings of 4th European Conference on Microfluidics (µFlu'14), Limerick, Ireland p.μFLU14-96:1-7 2014
[ACT157]O. Ksentini, B. Combes, M.S. Abbes, A. Daidié and M. Haddar. 3D finite element model for the study of the dynamic behaviour of bolted joint self loosening. Proceedings of International Conference Multiphysics Modelling and Simulation for Systems Design, Sousse, Tunisie 2014
[ACT158]A. Frezzotti, H. Si Hadj Mohand , C. Barrot and S. Colin. Role of diffusion on molecular tagging velocimetry technique for rarefied gas flow analysis. Proceedings of 4th European Conference on Microfluidics (µFlu'14), Limerick, Ireland p.μFLU14-92:1-10 2014
[ACT159]S. Wang, L. Baldas, S. Colin, N. Mazellier and A. Kourta. Numerical and experimental characterization of a micro-oscillator for flow control. Proceedings of 4th European Conference on Microfluidics (µFlu'14), Limerick, Ireland p.μFLU14-131:1-9 2014
[ACT160]C. Lafforgue-baldas, P. Magaud, Y. Gao, L. Leitner, P. Schmitz and L. Baldas. Exploration of micro-focusing potentialities for microorganism's separation. Proceedings of 4th European Conference on Microfluidics (µFlu'14), Limerick, Ireland p.µFLU14-99:1-4 2014
[ACT161]G. Waycaster, C. Bes, V. Bilotkach, C. Gogu, R. Haftka and N.-H. Kim. Structural Design Optimization with Economic Uncertainty: An Application to Interactions between Designers, Airlines, and Regulators. Proceedings of ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Canada, 14-20th November 2014
[ACT162]J. Le Dref, Y. Landon, G. Dessein and C. Espinosa. Contribution to understanding and modelizing vibration assisted drilling. Proceedings of 4th ICEIR Int. Congress on Engineering of Industrial Risks & 32nd CMVA Annual Seminar on Machinery Vibration 2014
[ACT163]H. Si Hadj Mohand , F. Samouda, C. Barrot, S. Colin and A. Frezzotti. Investigation of laser induced phosphorescence and fluorescence of acetone at low pressure for molecular tagging velocimetry in gas microflows. Proceedings of 4th Micro and Nano Flows Conference (MNF2014), London, UK 2014
[ACT164]Y. Gourinat and J.M. de Poulpiquet. New perspectives on international administrative cooperation in regard of the development of private human flight. Proceedings of IAC 2014, Toronto Sept./Oct.2014 2014
[ACT165]S. Dubreuil, M. Salaün, E. Rodriguez and F. Petitjean. Construction of frequency response function confidence interval by a semi analytical approach. Proceedings of USD2014 - International Conference on Uncertainty in Structural Dynamics - Leuven (Belgique), Septembre 2014
[ACT166]J.-C. Maré, G. Vinson, T. Prado and M. Combacau. Modelling and simulating the pump of an aerospace electro-hydrostatic module for fault detection and identification purposes. Proceedings of Proceedings of the Bath/ASME Symposium on Fluid Power and Motion Control p.1-10 2014 [DOI]
[ACT167]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. Proceedings of International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy) 2014
[ACT168]J.-C. Passieux, F. Bugarin, J.-N. Périé, L. Robert and C. David. Multiscale FE-based DIC for improved full-field measurements and identification. Proceedings of 16th International Conference on Experimental Mechanics, ICEM16 (Cambridge, UK) 2014
[ACT169]E. Piollet, E. Chatelet, S. Baguet and G. Michon. Experimental study of a fibrous material in sandwich configuration. Proceedings of VISHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr) 2014
[ACT170]M. Duval, J.-C. Passieux, M. Salaün and S. Guinard. Local/global non-intrusive parallel coupling for large scale mechanical analysis. Proceedings of WCCM XI, ECCM V, ECFD VI - 11th World Congress on Computational Mechanics - Barcelona (Espagne), Juillet 2014 [OATAO]
[ACT171]L. Cot, Y. Wang, C. Bes and C. Gogu. Scheduled and SHM Structural Airframe Maintenance Applications Using a New Probabilistic Model. Proceedings of 7th European Workshop on Structural Health Monitoring, Nantes, France, 8-11th July 2014
[ACT172]T. Benhaddou, A. Daidié, P. Stephan, J. Guillot, C. Chirol and J.-B. Tuery. Pretension influence on metallic shear joints. Proceedings of International Conference on Integrated Design, Mechanical Engineering and Advanced Manufacturing, IDMME2014, Toulouse, France 2014
[ACT173]M. Soilahoudine, C. Gogu and C. Bes. More efficient optimization of large scale finite element problems through an interaction between adaptive surrogate based optimization and reduced order modeling. Proceedings of OPT-i international conference, Kos, Greece, 4-6th June 2014
[ACT174]T. Li, E. Gourc, S. Seguy and A. Berlioz. Analysis of a turning process strongly coupled to a vibro-impact nonlinear energy sink. Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, 18-20 juin 2014, Toulouse, France 2014
[ACT175]J. Loukota, A. Lucchetti, J.-C. Passieux and G. Michon. Introduction to mid-range frequency global vibrations of large aircraft. Proceedings of VISHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr) 2014
[ACT176]L. Robert, J.-C. Passieux, F. Bugarin, C. David and J.-N. Périé. Multiscale FE-based DIC for enhanced measurements and constitutive parameter identification. Proceedings of Annual Conference & Exposition on Experimental and Applied Mechanics, SEM2014 (Greenville, USA) p.265-275 2014 [DOI]
[ACT177]L. Bernard, D. Cornette, V. Nègre, B. Kerdreux, B. Castanié and G. Michon. Couplage Aéroélastique Flexion-Torsion de Pale d’Hélicoptère. Proceedings of ViSHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr) 2014
[ACT178]M. Duval, J.-C. Passieux, M. Salaün and S. Guinard. Non-Intrusive model coupling: A flexible way to handle local geometric and mechanical details in FEA. Proceedings of Joint conference on Mechanical, Design Engineering & Advanced Manufacturing - Toulouse (France), Juin 2014 [OATAO]
[ACT179]F. Soulas, C. Espinosa, F. Lachaud, Y. Duval, S. Guinard, B. Lepetit and I. Revel. Design of Mechanical Impact tests equivalent to lightning strikes. Proceedings of ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014 2014
[ACT180]H. Liu, D. Leray, P. Pons and S. Colin. Finite element multi-physics modeling for ohmic contact of microswitches. Proceedings of 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2014), Ghent, Belgium p.1-8 2014
[ACT181]M. Budinger, I. Hazyuk, F. Sanchez and J.-C. Maré. Scaling-law-based metamodels for the sizing of actuation systems . Proceedings of 6th International Conference on Recent Advances in Aerospace Actuation Systems and Components p.129-135 2014
[ACT182]F. Van Der Linden, C. Schlegel, M. Christmann, G. Regula, C. Hill, P. Giangrande and J.-C. Maré. Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters. Proceedings of 10th International Modelica Conference, Lund Sweden p.1-10 2014 [DOI]
[ACT183]G. Waycaster, R. Haftka, N.-H. Kim, V. Bilotkach, C. Gogu and C. Bes. Relationship between Fleet Characteristics and Welfare of Stakeholders of Commercial Air Transportation: Airlines, Manufacturers, and the Public. Proceedings of 52nd Aerospace Sciences Meeting, National Harbor, Maryland, USA, 13-17th January 2014
[ACT184]A. Reysset, M. Budinger and J.-C. Maré. Mission profiles analysis: guidelines to aircraft actuators new technology specification. Proceedings of Proceedings of 29th congress of the International Council of the Aeronautical Sciences, St Petersbourg, 7-12 september 2014. 2014
[ACT185]V. Achard, A. Daidié, M. Paredes and C. Chirol. Influence of the cold expansion process on fatigue performance of hard alloys holes. Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, 18-20 juin 2014, Toulouse, France 2014
[ACT186]S. Dols, M. Paredes and P. Morgue. Quality evaluation of bolted assemblies through tightening. Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, 18-20 juin 2014, Toulouse, France 2014
[ACT187]M. Bouhlel, N. Bartoli, J. Morlier and A. Ostmane. Kriging Combining Partial Least Squares for Optimization in High Dimension. Proceedings of EngOpt 2014, 4th International Conference on Engineering Optimization, Lisbon, Portugal 2014
[ACT188]A. Chammah, D. Cornette and J. Morlier. Strategies for minimization of dynamic loads transmitted to a helicopter fuselage. Proceedings of opti2014, 1st International Conference on Engineering and Applied Sciences Optimization, Kos, Greece 2014
[ACT189]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force estimation through high speed digital image correlation. Proceedings of 21th DYMAT technical meeting: High speed imaging for dynamic testing of material and structures (London, UK) 2013
[ACT190]C. Espinosa, K. Bodjona, L. Michel and F. Lachaud. Numerical prediction of damage interaction during L-Shaped laminated composite structures unfolding. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM2013) p.461-464 2013 [DOI]
[ACT191]R. Denis, A. Debiane, G. Dauphin Tanguy and J.-C. Maré. Presage virtual testing platform application to thrust reverser actuation. Proceedings of 4th European Air and Space Conference CEAS 2013; Linkoping, Sweden 2013
[ACT192]G. Ferraioli, M. Causse, S. Lizy-destrez and Y. Gourinat. Habitability of manned vehicles and mission design : the impact of human factors on long-duration human space exploration missions en route to Mars . Proceedings of 64th International Astronautical Congress, Beijing, China 2013
[ACT193]D. Arriola, A. Reysset, M. Budinger, F. Thielecke and J.-C. Maré. From Airframer Requirements to Detailed Technical Specification of Electromechanical Actuators Aided by Knowledge-Based Methods . Proceedings of SAE 2013 AeroTech Congress & Exhibition, Montréal, Quebec, Canada , September 24-26, 2013 2013 [DOI]
[ACT194]C. Espinosa, M. Ruiz-Ayuso and F. Lachaud. Inner damage and external dent in composite structures after impact - Part I : experimental observations. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM 2013) p.457-460 2013 [DOI]
[ACT195]L. Cot, C. Bes, C. Gogu and S. Segonds. Structural airframe maintenance strategy comparison: a new approach. Proceedings of 9th International Workshop on Structural Health Monitoring (IWSHM), Stanford, California (USA), 10-12th Sept. 2013
[ACT196]H. Liu, D. Leray, P. Pons and S. Colin. An asperity-based finite element model for electrical contact of microswitches. Proceedings of 59th IEEE Holm Conference on Electrical Contacts, Newport, RI, USA 2013 [DOI]
[ACT197]D. Cornette, B. Kerdreux, G. Michon and Y. Gourinat. Aeroelastic Tailoring of Blades. Proceedings of International Design Engineering Technical Conferences & Computers & Information in Engineering Conference (IDETC/CIE) 2013
[ACT198]M. Charlotte and J. Morlier. Représentation quasicontinue d’un crystal phononique unidimensionnel en un métamatériau acoustique. Proceedings of Congrès Français de Mécanique 2013, Rencontre mathématiques/mécanique 2013
[ACT199]S. Dubreuil, F. Petitjean and M. Salaün. Etude numérique de l'influence de la structure de dépendance des valeurs propres en synthèse modale probabiliste. Proceedings of CFM 2013 - 21ème Congrès Français de Mécanique - Bordeaux (France), Août 2013 [OATAO]
[ACT200]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. La PGD au service de la mesure de champs cinématiques volumiques. Proceedings of CFM 2013 - 21e Congrès Français de Mécanique. (Bordeaux, Fr) 2013
[ACT201]J.-P. Crété, P. Longère and J.-M. Cadou. Simulation 2D de la fissuration dans un matériau ductile endommageable avec X-FEM. Proceedings of CFM, 21ème Congrès Français de Mécanique, Bordeaux (France), 26-30 août 2013 2013
[ACT202]J.-S. Brest, P. Longère, V. Keryvin and Y. Yokoyama. Approche expérimentale et numérique de la plasticité des verres métalliques massifs. Proceedings of CFM, 21ème Congrès Français de Mécanique, Bordeaux (France), 26-30 août 2013 2013
[ACT203]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Stratégies d'identification de paramètres constitutifs à partir de mesures par corrélation d'images multi-résolutions. Proceedings of 21ème Congrès Français de Mécanique, 26-30 août (Bordeaux, Fr) 2013
[ACT204]D. Cornette, B. Kerdreux, Y. Gourinat and G. Michon. Modélisation aéroélastique des pales d’hélicoptères avec couplages élastiques. Proceedings of 21ème Congrès Français de Mécanique, Bordeaux 2013
[ACT205]E. Gourc, S. Seguy, G. Michon and A. Berlioz. Passive control of an harmonically excited vibrating beam using a vibro-impact nonlinear energy sink. Proceedings of 21ème Congrès Français de Mécanique, 26-30 août 2013, Bordeaux, France 2013
[ACT206]S. Seguy and A. Seguy. Methodology of decision support: application to machining chatter. Proceedings of 21ème Congrès Français de Mécanique, 26-30 août 2013, Bordeaux, France 2013
[ACT207]J.-C. Passieux, P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero and J.-N. Périé. Experimental study of impacts on helicopter blades using digital image correlation. Proceedings of 19th International Conference on Composite Materials, ICCM19, (Montréal, Canada) 2013
[ACT208]I. Maillet, S. Claro-neto, M. Fressinet, F. Lachaud and Y. Gourinat. Evaluation of Delamination Propagation in a Composite Structure under Vibration Loading. Proceedings of 19th International Conference on Composite Materials, Montréal 2013
[ACT209]S. Djebali, S. Segonds, J.-M. Redonnet and W. Rubio. Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling. Proceedings of World Congress on Engineering 2013
[ACT210]M. Gonzalez, N. Binaud, C. Espinosa, C. Gogu, J. Morlier and S. Quoniam. Towards a consideration of the uncertainties in flight loads. Proceedings of 5th European Conference for Aeronautics and Space Sciences, Munich, Germany, 1-5th July 2013
[ACT211]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Theoretical and experimental study of an harmonically forced vibro-impact nonlinear energy sink. Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2013-13172, 4-7 août 2013, Portland, OR, États-Unis 2013
[ACT212]X. Wang, A. Reysset, V. Budinger and Y. Gourinat. A Modified Preisach Model for Hysteresis in Piezoelectric Actuators. Proceedings of 11th Electronics, Control, Measurement, Signals & application to Mechatronics (ECMSM, IEEE) 2013
[ACT213]C. Chen, L. Michel, C. Espinosa and F. Lachaud. Etude de l’effet du vieillissement humide sur le comportement à l’impact d’un stratifié composite carbone-époxy. Proceedings of Journées Nationales sur les Composites (JNC18) 2013
[ACT214]S. Dubreuil, F. Petitjean and M. Salaün. A coupled parametric and nonparametric approach for modal analysis of a satellite. Proceedings of ICOSSAR 2013 - 11th International Conference on Structural Safety and Reliability - New York (USA), Juin 2013 [OATAO]
[ACT215]E. Gnesi and J.-C. Maré. Modeling of EHA Module Equipped with Fixed-Displacement Vane Pump. Proceedings of Proceeding of the 13th Scandinavian International Conference on Fluid Power, June 3-5, Linkoping, Sweden, 2013
[ACT216]I. Maillet, L. Michel, F. Lachaud, M. Fressinet and Y. Gourinat. Modélisation de la propagation de délaminage dans une structure composite soumise à un chargement vibratoire. Proceedings of Journées Nationales des Composites, JNC18, Nantes 2013
[ACT217]L. Barrière, S. Marguet, J.-C. Passieux, B. Castanié and P. Cresta. Modeling strategies for postbuckilig of large stiffened structures. Proceedings of ICCS 16, Intenational Conference on Composite Structure, June 17-20 (Porto, Portugal) 2013
[ACT218]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Impact et tenue résiduelle des inserts de structures sandwichs. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT219]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Experimental analysis of impact and pull-through after impact in insert in sandwich structures. Proceedings of 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013 2013
[ACT220]M. Paredes, N. Nefissi and M. Sartor. Analytical studies of axial load transfert in an interference fit fastener assembly. Proceedings of XXII International conference on Graphic Engineering p.6 2013
[ACT221]C. Gogu and J.-C. Passieux. Reduced basis surrogate modelling approach applied to the identification of mechanical properties. Proceedings of 4th International Conference on Integrity, Reliability and Failure of Mechanical Systems, 23-27th June (Funchal, Portugal) 2013
[ACT222]L. Bennani, P. Villedieu and M. Salaün. Two Dimensional Model of an Electro-Thermal Ice Protection System. Proceedings of 5th AIAA Atmospheric and Space Environments Conference - San Diego (CA, USA), Juin 2013 [OATAO]
[ACT223]N. Roussouly, J. Morlier, M. Charlotte and M. Salaün. Approche fiabiliste pour l'optimisation locale d'un problème couplé fluide-structure. Proceedings of CSMA 2013 - 11ème Colloque National en Calcul des Structures - Giens (France), Mai 2013 [OATAO]
[ACT224]C. Pozzolini, Y. Renard and M. Salaün. Schémas asymptotiquement conservatifs en énergie dans un problème de vibro-impact de plaques. Proceedings of CSMA 2013 - 11ème Colloque National en Calcul des Structures - Giens (France), Mai 2013 [OATAO]
[ACT225]S. Dubreuil, F. Petitjean and M. Salaün. Synthèse modale probabiliste de systèmes à plusieurs degrés de liberté. Proceedings of CSMA 2013 - 11ème Colloque National en Calcul des Structures - Giens (France), Mai 2013 [OATAO]
[ACT226]J.-C. Passieux, L.A. Gomes Perini, E. De Luycker and J.-N. Périé. PGD et mesure de champs par corrélation d’images. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT227]J.-S. Brest, P. Longère, V. Keryvin and Y. Yokoyama. Étude expérimentale et numérique de la plasticité de verres métalliques massifs.. Proceedings of CSMA, 11e Colloque National en Calcul des Structures, Giens (France), 27/31 mai 2013 2013
[ACT228]L. Barrière, S. Marguet, P. Cresta, B. Castanié and J.-C. Passieux. Décomposition de domaine et réduction de modèle: stratégie de résolution pour le post-flambement local des structures raidies. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT229]M. Gonzalez, C. Gogu, N. Binaud, C. Espinosa, J. Morlier and S. Quoniam. Uncertainty quantification in aircraft load calibration. Proceedings of 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, Florida, USA, 19-24th May 2013
[ACT230]L. Jaeger, T. Jorquera, S. Lemouzy, C. Gogu, S. Segonds and C. Bes. Uncertainty propagation in multi-agent system for multidisciplinary optimization problem. Proceedings of 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, Florida, USA, 19-24th May 2013
[ACT231]C. Gogu and J.-C. Passieux. The key points approach: combining response surface methodology and reduced order modeling to achieve drastic reduction in surrogates construction cost. Proceedings of 10th World Congress on Structural and Multidisciplinary Optimization, 19-24th May (Orlando, Florida, USA) 2013
[ACT232]V. Budinger, O. Cherrier, J. Morlier and F. Lachaud. Damage Location Method for Thin Composites Structures - Appplication to an Aircraft Door. Proceedings of International Workshop on Aircraft System Technologies (AST 2013), Hambourg, Allemagne 2013
[ACT233]I. Maillet, L. Michel, M. Fressinet, F. Lachaud and Y. Gourinat. Evaluation of Delamination Propagation in a Composite Structure Under Vibration Loading. Proceedings of 9th International Conference on Composite Science and Technology (ICCST-9) p.174-185 2013
[ACT234]O. Ksentini, B. Combes, M.S. Abbes, A. Daidié and M. Haddar. Behavior of single-lap bolted joint subjected to dynamic transverse load. Proceedings of 5e Congrès International Conception et Modélisation des Systèmes Mécaniques, Djerba, Tunisie 2013
[ACT235]L. Michel, S. Garcia, C. Yao, C. Espinosa and F. Lachaud. Experimental and numerical investigation of delamination in curved-beam multidirectional laminated composite specimen. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM 2013) p.389-392 2013
[ACT236]S. Garcia, L. Michel, C. Espinosa, F. Lachaud and R. Piquet. Experimental Study of Corner Shaped Composite Laminates Subjected to Pure Bending. Proceedings of Proceedings of the 9th International Conference on Composite Science and Technology (ICCST-9) 2013
[ACT237]T. Ros, M. Budinger, A. Reysset and J.-C. Maré. Modelica Preliminary Design Library for Electromechanical Actuators. Proceedings of AST 2013, 4th International Workshop on Aircraft System Technologies, TUHH, Hamburg, Germany, April 23-24, 2013 2013
[ACT238]B. Wang, L. Adolphe and L. Cot. New building typology for solar chimney electricity. Proceedings of International Conference New Urban Configuration p.en attente 2013
[ACT239]J.-P. Crété, P. Longère and J.-M. Cadou. Propagation d’une fissure 2D dans un matériau ductile endommageable avec X-FEM. Proceedings of Proceedings of CSMA, 11e Colloque National en Calcul des Structures, Giens (France), 27/31 mai 2013 2013
[ACT240]C. Lafforgue-Baldas, P. Magaud, P. Schmitz, Z. Zhihao, S. Geoffroy and M. Abbas. Study of microfocusing potentialities to improve bioparticle microfiltration process: towards an experimental approach. Proceedings of 3rd European Conference on Microfluidics (µFlu'12), Heidelberg, Germany p.µFLU12-222:1-12 2012
[ACT241]P. Magaud, S. Geoffroy, M. Abbas, C. Lafforgue, S. Colin and L. Baldas. Particles in square micro-channel flows: experimental and numerical validation of the process. Proceedings of 3rd European Conference on Microfluidics (µFlu'12), Heidelberg, Germany p.µFLU12-217:1-10 2012
[ACT242]F. Samouda, S. Colin, C. Barrot, L. Baldas and J. Brandner. Molecular tagging velocimetry for internal gas flows - From continuum to shlightly rarefied regime. Proceedings of 3rd European Conference on Microfluidics (µFlu'12), Heidelberg, Germany p.µFLU12-144:1-10 2012
[ACT243]C. David, L. Robert, J.-C. Passieux and J.-N. Périé. Local/Global FEMU identification of mechanical parameters. Proceedings of The 2nd International Symposium on Experimental Mechanics (Tapei, Taiwan) 2012
[ACT244]X. Giraud, H. Piquet, M. Budinger, X. Roboam, M. Sartor and S. Vial. Knowledge-based system for aircraft electrical power system reconfiguration. Proceedings of 2nd International Conference on Electrical Systems for Aircraft Railway And Ship Propulsion 2012 (ESARS 2012) - Bologne 2012
[ACT245]X. Wang, V. Budinger and Y. Gourinat. A Specific Methodology of Creep Compensation for Piezoelectric Actuators by Open-loop control. Proceedings of 2nd International Conference on Mechanical Engineering, Materials & Energy (ICMEME) Dalian China 2012
[ACT246]C. Espinosa, J. Limido, F. Lachaud and J.-L. Lacome. Combining a CDM model and a FE-Particle method to analyse the ruin modes of a composite structure during a crash. Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) 2012
[ACT247]E. Faugere, J.-C. Maré, C. Changenet, F. Ville and D. Delloue . Coupling Mechanical and Thermal Lumped Parameters Model for the Preliminary Design of Power Transmsissions Driven by Thermal Issues. Proceedings of 28TH International Congress on Aerospace Sciences, Brisbane, Australia, 23-28 September 2012
[ACT248]H. Liu, D. Leray, S. Colin, P. Pons and A. Broué. Finite element based surface roughness study for ohmic contact of microswitches. Proceedings of 58th IEEE Holm Conference on Electrical Contacts, Portland, Oregon, USA p.6336607:1-10 2012 [DOI]
[ACT249]L. Wang, J.-C. Maré and Y. Fu. Investigation in the dynamic force equalization of dissimilar redundant actuation systems operating in active/active mode. Proceedings of 28th International Congress of the Aeronautical Sciences ICAS 2012, Brisbane, Australia, 23-28 September, p.session-6.8.1 2012
[ACT250]J.-P. Crété, P. Longère and J.-M. Cadou. X-FEM assisted simulation of ductile damage induced 2D crack propagation. Proceedings of ECCOMAS 2012, European Congress on Computational Methods in Applied Sciences and Engineering, Vienne (Autriche), 10/14 Septembre 2012 2012
[ACT251]P. Longère, A.-G. Geffroy and B. Leblé. Experimental and Numerical Aspects of Ship Structure Failure Under Airblast Loading. Proceedings of DYMAT 2012, 10th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Freiburg (Allemagne), 2/7 Septembre 2012 2012 [DOI]
[ACT252]X. Giraud, M. Sartor, X. Roboam, B. Sareni, H. Piquet, M. Budinger and S. Vial. Comparative study of stochastic optimization methods to solve load allocation problem for aircraft electrical power system design. Proceedings of XII-th International Workshop on Optimization and Inverse Problems in Electromagnetism (OIPE 2012) - Ghent 2012
[ACT253]J. Morlier, M. Charlotte, F. Habib and E. Lima. Structural Wingbox Optimization for the Coupled Fluid Structure Interaction Problem of a Flexible Wing: Finite Element Analysis sol200 versus Surrogate Models. Proceedings of The Eleventh International Conference on Computational Structures Technology (CST 2012). 2012 [DOI] [OATAO]
[ACT254]L. Cot, C. Gogu and C. Bes. Quantification of the effect of SHM in structural aircraft maintenance in uncertain environment. Proceedings of 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna, Austria, 10-14th Sept. 2012
[ACT255]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Design optimisation of a nonlinear energy Sink embedded on a harmonically forced linear oscillator: theoretical and experimental developments. Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2012-71014, 12-15 août 2012, Chicago, IL, États-Unis 2012 [DOI]
[ACT256]E. Gourc, S. Seguy, G. Michon and A. Berlioz. Response regimes of a cutting tool on a lathe strongly coupled to a nonlinear energy sink. Proceedings of XVIIIth Symposium VIbrations, SHocks & NOise VISHNO, 3-5 juillet 2012, Paris, France 2012
[ACT257]T. Benhaddou, P. Stephan, A. Daidié, C. Chirol and J.-B. Tuery. Effect of Axial Preload on Double-Lap Bolted Joints Numerical Study. Proceedings of ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, ESDA2012, Nantes, France, July 2-4 2012
[ACT258]I. Maillet, L. Michel, M. Fressinet and Y. Gourinat. Comparison between static and dynamic results for mode I and mode II fatigue delamination growth onset of unidirectionnal composite. Proceedings of European Conference on Composite (ECCM15), Venezia 2012
[ACT259]J.-C. Maré. 2-D Lumped parameters modelling of EMAs for advanced virtual prototyping of EMAs. Proceedings of Proceedings of Recent Advances in Aerospace Actuation Systems and Components, Toulouse, France, June 13-14, 2012
[ACT260]S. Dubreuil, M. Berveiller, F. Petitjean and M. Salaün. Determination of Bootstrap confidence intervals on sensitivity indices obtained by polynomial chaos expansion. Proceedings of JFMS12 - Journées Fiabilité des Matériaux et des Structures - Chambéry (France), Juin 2012 [OATAO]
[ACT261]C. Gogu, L. Cot and C. Bes. Comparaison de stratégies de maintenance de structures aéronautiques basées sur le suivi de l’état de santé embarqué. Proceedings of 7èmes Journées Nationales sur la Fiabilité, Chambéry, France, 4-6 juin 2012
[ACT262]P. Longère, A.-G. Geffroy, B. Leblé and A. Dragon. Temperature- and rate-dependent failure in dynamically loaded viscoplastic materials. Proceedings of SEM XII, International Congress and Exposition on Experimental & Applied Mechanics, Costa Mesa (USA), 11/14 Juin 2012 2012
[ACT263]C. Chen, C. Espinosa, L. Michel and F. Lachaud. A numerical Approach for analyzing post-impact behaviour of composite laminate plate under in-plane compression. Proceedings of ECCM15 - 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Venice, Italy, 24-28 June 2012 2012
[ACT264]C. Gogu, S. Pattabhiraman, L. Cot, N.H. Kim, R.T. Haftka and C. Bes. Comparing aircraft maintenance approaches based on structural health monitoring. Proceedings of PSAM 11 & ESREL 2012, Helsinki, Finland, 25-29th June 2012
[ACT265]P. Selva, O. Cherrier, J. Morlier, F. Lachaud and V. Budinger. Model driven versus Data Driven Damage Localization Methods: EMI Monitoring of Thin Composites Structures. Proceedings of 1st International Conference on Composites Dynamics (DYNACOMP), Arcachon, France 2012
[ACT266]E. Gourc, S. Seguy, G. Michon and A. Berlioz. Delayed dynamical system strongly coupled to a nonlinear energy sink: application to machining chatter. Proceedings of International Conference on Structural Nonlinear Dynamics and Diagnostics, 30 avril - 02 mai 2012, Marrakech, Maroc 2012
[ACT267]S. Pattabhiraman, C. Gogu, N.H. Kim, R.T. Haftka and C. Bes. Effect of condition-based maintenance strategy aligned with scheduled maintenance. Proceedings of 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, HI, 23-26th April 2012
[ACT268]F. Abevi, M. Chaussumier and A. Daidié. Répartition de charge dans une vis à rouleaux. Proceedings of 13ème Colloque National Mont-Dore 2012
[ACT269]J.-C. Maré. Historical evolution and challenges in aerospace actuation. Proceedings of Proc of the 8th International Fluid Power Conference, Dresden, Germany, March 26-28 2012
[ACT270]J.-C. Passieux, J.-N. Périé and L.A. Gomes Perini. A PGD approach to reduce the dimensionality of FE-based digital image correlation. Proceedings of 5th international conference on optical measurement techniques - Optimess (Antwerp, Belgium) p.293-302 2012
[ACT271]A. Berranger, A. Daidié and M. Dijoud. Outils d'aide à la décision pour la conception des attaches pales - disques de roues de turbines. Proceedings of 13ème Colloque National AIP PRIMECA, Le Mont Dore, France, 27-30 Mars 2012
[ACT272]L. Jaeger, C. Gogu, S. Segonds and C. Bes. Conception préliminaire avion avec prise en compte d’incertitudes de modèles et de paramètres. Proceedings of 13ème Colloque National AIP-Primeca, Mont Dore, 27-30 mars 2012
[ACT273]S. Foucaud, G. Michon, Y. Gourinat, A. Pelat and F. Gautier. Designing an Experiment Inspired by Cochlea for Travelling Waves Observation. Proceedings of IMAC XXX, Jacksonville USA 2012
[ACT274]S. Foucaud, G. Michon, Y. Gourinat, A. Pelat and F. Gautier. Immersed acoustic black hole as a travelling wave absorber : understanding artificial cochlear mechanics. Proceedings of Acoustics 2012, Nantes 2012
[ACT275]C. Barrot and S. Colin. Design of tree-shaped microchannel networks submitted to simultaneous pressure driven and electro-osmotic Flows. Proceedings of Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2012) 2012 [DOI]
[ACT276]A. Fraj, M. Budinger, T. El Halabi, J.-C. Maré and C. Negoita. Modelling approachs for the simulation-based preliminary design and optimization of electromecanical and hydraulic actuation systems. Proceedings of 8th AIAA Multidisciplinary Design Optimization Specialist Conference, 23-26 April 2012, Honolulu, Hawaii, USA. 2012
[ACT277]M. Charlotte. Dynamics and quasicontinuum analogs of a lattice with simple microstructures. Proceedings of ECT2012: The Eighth International Conference on Engineering Computational Technology, Dubrovnik, Croatia, 4-7 September 2012 2012 [DOI]
[ACT278]V. Leontidis, L. Baldas and S. Colin. Numerical simulation of thermal transpiration in the slip flow regime with curved walls. Proceedings of ASME 2012 10th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2012) p.205-212 2012 [DOI]
[ACT279]Y. Li, S. Joseph, S. Colin, L. Baldas, C. Barrot, S. Orieux, D. Newport and J.J. Brandner. Quantitative measurement of gas pressure drop along T-shaped micro channels by interferometry. Proceedings of 1st European Conference on Gas MicroFlows -GASMEMS2012-, Skiathos, Greece (in Journal of Physics: Conference Series vol. 362) p.012032 2012 [DOI]
[ACT280]F. Samouda, J.J. Brandner, C. Barrot and S. Colin. Velocity field measurements in gas phase internal flows by molecular tagging velocimetry. Proceedings of 1st European Conference on Gas MicroFlows -GASMEMS2012-, Skiathos, Greece (in Journal of Physics: Conference Series vol. 362) p.012026 2012 [DOI]
[ACT281]F. Samouda, C. Barrot, S. Colin, L. Baldas and N. Laurien. Analysis of gaseous flows in microchannels by molecular tagging velocimetry. Proceedings of ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM 12), Puerto Rico, USA p.221-228 2012 [DOI]
[ACT282]L. Szalmas, S. Colin and D. Valougeorgis. Flow rate measurements of binary gas mixtures through long trapezoidal microchannels. Proceedings of 1st European Conference on Gas MicroFlows -GASMEMS2012-, Skiathos, Greece (in Journal of Physics: Conference Series vol. 362) p.012003 2012 [DOI]
[ACT283]V. Leontidis, J.J. Brandner, L. Baldas and S. Colin. Numerical analysis of thermal creep flow in curved channels for designing a prototype of Knudsen micropump. Proceedings of 1st European Conference on Gas MicroFlows -GASMEMS2012-, Skiathos, Greece (in Journal of Physics: Conference Series vol. 362) p.012004 2012 [DOI]
[ACT284]L. Cot and R. Lozi. Assessing the security of subsampling process using modified EKF and nonlinear squares method. Proceedings of 7th IEEE, International Conference on Internet Technology and Secured Transactions, London, UK, 10-12th Dec. 2012
[ACT285]A. Jihnaoui, L. Mevel and J. Morlier. Subspace Instability Monitoring for Linear Periodically Time-Varying Systems. Proceedings of 16th IFAC Symposium on System Identification p.380-385 2012 [DOI] [OATAO]
[ACT286]Y. Li, C. Barrot, L. Baldas, S. Colin, J.J. Brandner and D. Newport. Gas mass flow rate measurement in T-shaped microchannels in slip flow regime. Proceedings of ASME 2011 International Mechanical Engineering Congress & Exposition (IMECE2011) - Vol. 6 p.775-782 2012 [DOI]
[ACT287]A. Jihnaoui, L. Mevel and J. Morlier. Subspace Identification for Linear Periodically Time-varying Systems. Proceedings of 16th IFAC Symposium on System Identification p.1282-1287 2012 [DOI] [OATAO]
[ACT288]J. Morlier and D. Bettebghor. Compressed Sensing Applied to Modeshapes Reconstruction. Proceedings of Proceedings of the 30th IMAC, A Conference on Structural Dynamics p.1-8 2012 [DOI] [OATAO]
[ACT289]L. Sanches, G. Michon and A. Berlioz. Numerical and Experimental Investigations in Helicopters Ground Resonance Phenomenon with Blades Asymmetries. Proceedings of Vibration Shock and Noise, Paris, 2012 2012
[ACT290]J. Morlier, M. Bergh and L. Mevel. Modeshapes Recognition Using Fourier Descriptors: A Simple SHM Example. Proceedings of Proceedings of the 30th IMAC, A Conference on Structural Dynamics p.195-204 2012 [DOI] [OATAO]
[ACT291]L. Sanches, G. Michon, D. Alazard and A. Berlioz. Helicopter Ground Resonance Phenomenon with Blade Stiffness Dissimilarities: Experimental and Theoretical Developments. Proceedings of ASME IDETC/CIE, Chicago, IL, USA 2012
[ACT292]A. Jihnaoui, L. Mevel and J. Morlier. Extension of Subspace Identification to LPTV Systems: Application to Helicopters.. Proceedings of Proceedings of the 30th IMAC, A Conference on Structural Dynamics p.425-433 2012 [DOI] [OATAO]
[ACT293]L. Cot and C. Bes. Study of Robustness of an Enhanced CSK system by using the Extended Kalman Filter. Proceedings of 6th, IEEE, International Conference on Internet Technology and Secured Transactions, Abu Dhabi, UAE, 11-14th Dec. 2011
[ACT294]T. Reytier, C. Bes, P. Marechal, M. Bianciardi and A. Santgerma. Modeling Fatigue Spectrum of Aircraft Structure Under Gust Loads. Proceedings of International Conference on Fatigue Design, Senlis (France), 23-24 November 2011
[ACT295]M.S. Fofana and S. Seguy. Feedback control of regenerative chatter in high speed machining. Proceedings of ASME International Mechanical Engineering Congress and Exposition IMECE2011-64824, 11-17 novembre 2011, Denver, CO, États-Unis 2011
[ACT296]T. Gouache, Y. Gao, T. Frame, P. Coste and Y. Gourinat. Identification of the forces between regolith and a reciprocating drill-head : perspectives for the exploration of Martian regolith. Proceedings of International Astronautical Congress, Cape Town 2011
[ACT297]L. Wang, J.-C. Maré, Y. Fu and H. Qi. Force Equalization for Redundant Active/Active Position Control System Involving Dissimilar Technology Actuators. Proceedings of 8th JFPS International Symposium on Fluid Power, Okinawa, Japan, 25-26 October p.136-143 2011
[ACT298]L. Jaeger, C. Gogu, S. Segonds and C. Bes. Multidisciplinary optimization under uncertainty for preliminary aircraft sizing. Proceedings of SAE 2011 Aerotech Congress, Toulouse, 18-21st October 2011
[ACT299]A. Berranger, A. Daidié and M. Dijoud. Développement d’outils pour la conception et le soutien en production des attaches pales – disques de roues de turbines. Proceedings of CPI’2011, Oujda, Maroc, October 19-21 2011
[ACT300]H. Liu, D. Leray, P. Pons, S. Colin, A. Broué and J. Martegoutte. Validation of finite element structural simulation for ohmic microcontact. Proceedings of Eurosensors XXV, September 4-7, 2011, Athens, Greece (in Procedia Engineering, vol. 25) p.419-422 2011 [DOI]
[ACT301]M. Charlotte. Sur la modélisation quasi-continue d'un modèle discret unidimensionnel de Cosserat . Proceedings of 20ème Congrès Français de Mécanique, 28 août/2 sept. 2011 - 25044 Besançon, France (C5 Mathématique-Mécanique Paul GERMAIN) 2011
[ACT302]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Comportement dynamique d'un système non linéaire sous excitation harmonique. Proceedings of 20ème Congrès Français de Mécanique, 28 août - 2 septembre 2011, Besançon, France 2011
[ACT303]C. Gogu, W. Yin, R.T. Haftka, P.G. Ifju, J. Molimard, R. Le Riche and A. Vautrin. Approche bayesienne pour gérer les incertitudes dans l’identification à partir de mesures de champ. Proceedings of 20ème Congrès Français de Mécanique, Besançon, 29 août - 2 sept. 2011
[ACT304]L. Jaeger, C. Gogu, S. Segonds and C. Bes. Optimisation multidisciplinaire sous incertitudes en conception préliminaire avion. Proceedings of 20ème Congrès Français de Mécanique, Besançon, 29 août - 2 sept. 2011
[ACT305]E. Gourc, G. Michon, S. Seguy and A. Berlioz. Experimental investigation and theoretical analysis of a nonlinear energy sink under harmonic forcing. Proceedings of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011 VIB-48090, 28-31 août 2011, Washington, DC, États-Unis 2011 [DOI]
[ACT306]S. Foucaud, G. Michon, J. Morlier and Y. Gourinat. Harmonic Response of the Organ of Corti. Proceedings of 11th International Mechanics of Hearing, Williamstown 2011 [OATAO]
[ACT307]P. Selva, O. Cherrier, V. Budinger, F. Lachaud and J. Morlier. Smart EMI monitoring of thin composite structures. Proceedings of 16th International Conference on composite Structures (ICCS16), Porto, Portugal 2011
[ACT308]C. Renault, J. Roche, M.R. Ciumag, T. Tzedakis, S. Colin, P. Cognet, K. Serrano and O. Reynesa. Approaches in conception, design and optimization of electrochemical microreactors for continuous electrosyntheses. Proceedings of 9th European Symposium on Electrochemical Engineering (9th ESEE), Chania, Greece p.1-10 2011
[ACT309]L. Szalmas, D. Valougeorgis and S. Colin. Flow rate measurement of binary gases through long rectangular microchannels. Proceedings of 3rd International GASMEMS Workshop (GASMEMS11) p.GASMEMS11-2:1-8 2011
[ACT310]F. Lachaud, C. Espinosa and L. Michel. Prévision de l'endommagement de composites stratifiés carbone-époxy sous chargement de type impact. Proceedings of AMAC 17èmes Journées Nationales sur les Composites (JNC17), Juin 2011, Poitiers (FR) 2011
[ACT311]I. Maillet, L. Michel, M. Fressinet, G. Michon and Y. Gourinat. Mise en place d’un essai de détermination de seuil de propagation en fatigue du délaminage de mode I basé sur la résonance d’une éprouvette en matériau composite unidirectionnel. Proceedings of 17èmes Journées Nationales des Composites, Poitiers 2011
[ACT312]C. Pozzolini, Y. Renard and M. Salaün. Schémas numériques conservatifs pour des problèmes de vibro-impacts de poutres et de plaques. Proceedings of CSMA 2011 - 10ème Colloque National en Calcul des Structures - Giens (France), Mai 2011 [OATAO]
[ACT313]N. Roussouly, F. Petitjean and M. Salaün. Analyse de la fiabilité d'une structure spatiale. Proceedings of CSMA 2011 - 10ème Colloque National en Calcul des Structures - Giens (France), Mai 2011 [OATAO]
[ACT314]G. Permuy and A. Daidié. Study of the behavior of a complex revolute joint of aircraft landing gear. Proceedings of 4th International Congress CMSM’2011, Sousse, Tunisia, May 30 – June 1 2011
[ACT315]J.-C. Maré. Combining hydraulics and electrics for innovation and performance improvement in aerospace actuation. Proceedings of Proceedings of the Twelfth Scandinavian International Conference on Fluid Power, Tampere, Finlan, May 18-20 2011
[ACT316]F. Abevi, M. Chaussumier, A. Daidié and F. Bouillot. Comprehensive study of a normal elastic contact in a satellite roller screws device under static loading. Proceedings of 4th International Congress CMSM’2011, Sousse, Tunisia, May 30 – June 1 2011
[ACT317]J.-C. Passieux, A. Gravouil, J. Réthoré and M.-C. Baietto. Estimation directe des facteurs d'intensité des contraintes généralisés avec une méthode X-FEM multigrille à 3 niveaux. Proceedings of 10e Colloque National en Calcul des Structures - (Giens, Fr) 2011 [HAL]
[ACT318]P. Kerfriden, P. Gosselet, J.-C. Passieux and S.P.A. Bordas. Recent developments in local global reduction techniques for the simulation of local failure in structures. Proceedings of 10e colloque national en calcul des structures, (Giens, Fr) 2011 [HAL]
[ACT319]Y. Coquet, P. Bordeneuve, G. Capmas and C. Espinosa. Improvements in Fluid Structure Interaction simulations of LS-Dyna (r). Proceedings of 21st AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, Dublin (Ireland) 2011
[ACT320]C. Gogu, Y. Qiu, S. Segonds and C. Bes. Belief and plausibility approximation methods for multidimensional functions. Proceedings of 13th AIAA Non-Deterministic Approaches Conference, Denver, CO, 4-7th April 2011
[ACT321]J. Liscouet, M. Budinger and J.-C. Maré. Scaling laws for the simulation based preliminary design of electro-mechanical actuators. Proceedings of AST 2011, Hamburg, Germany, march 31-april 1, 2011. 2011
[ACT322]M. Charlotte and L. Truskinovsky. Modélisations quasi-continues du comportement dynamique d’un réseau atomique de simple micro-structure. Proceedings of 10e Colloque National en Calcul des Structures (CSMA 2011) 9-13 Mai 2011, Presqu’île de Giens (Var) 2011 [HAL]
[ACT323]A. Shahdin, J. Morlier, G. Michon, L. Mezeix, C. Bouvet and Y. Gourinat. Application of Modal Analysis for Evaluation of the Impact Resistance of Aerospace Sandwich Materials. Proceedings of 29th IMAC, A Conference on Structural Dynamics, Jacksonville USA p.171-177 2011 [DOI] [OATAO]
[ACT324]P. Longère, A.-G. Geffroy and B. Leblé. Simulation numérique de la rupture de structures navales sous l’effet d’explosions au contact. Proceedings of CSMA2011, 10ème Colloque National en Calcul des Structures, Giens (France), 9/13 Mai 2011 2011
[ACT325]V. Keryvin, J.-S. Brest, P. Longère and A. Anguet. Pressure sensitivity of plasticity in metallic glasses below glass transition: a literature review. Proceedings of THERMEC’2011, International Conference on Processing & Manufacturing of Advanced Materials, Québec (Canada), 1/5 Août 2011 2011
[ACT326]P. Longère, A.-G. Geffroy, B. Leblé and A. Dragon. Multi-surface description of temperature- and strain rate-dependent damage initiation and growth in ductile viscoplastic materials. Proceedings of COMPLAS XI, XI International Conference on Computational Plasticity Fundamentals and Applications, Barcelone (Espagne), 7/9 Septembre 2011 2011
[ACT327]F. Samouda, S. Colin and C. Barrot. Molecular Tagging Velocimetry: experimental setup development. Proceedings of 3rd International GASMEMS Workshop (GASMEMS11), Bertinoro, Italy p.GASMEMS11-9:1-8 2011
[ACT328]L. Szalmas, D. Valougeorgis and S. Colin. DSMC simulation of pressure driven binary rarefied gas flows through short microtubes. Proceedings of ASME 2011 9th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2011), vol. 1 p.279-288 2011 [DOI]
[ACT329]D. Bettebghor, M. Samuelides, S. Grihon, N. Bartoli and J. Morlier. Approche en paramètres de stratification pour l’optimisation biniveau de structures de fuselage composite. Proceedings of CSMA 10e colloque national en calcul des structures 2011 [HAL] [OATAO]
[ACT330]Y. Li, C. Barrot, L. Baldas, S. Colin and D. Newport. A setup for gas mass flow rate measurement in T-shaped micro channel. Proceedings of 3rd International GASMEMS Workshop (GASMEMS11), Bertinoro, Italy 2011
[ACT331]A. Jihnaoui, L. Mevel and J. Morlier. A CUSUM test with sliding reference for ground resonance monitoring. Proceedings of The 6th International Workshop on Advanced Smart materials and Smart Structures Technology 2011
[ACT332]J. Morlier. A pedagogical image processing tool to understand structural dynamics. Proceedings of Proceedings of the 28th IMAC, A Conference on Structural Dynamics p.1215-1224 2011 [DOI] [OATAO]
[ACT333]L. Szalmas, S. Colin and D. Valougeorgis. Flow rate measurement of rarefied binary gases in long rectangular microchannels. Proceedings of 3rd Micro and Nanoflow Conference (MNF2011) p.MNF2001-5:1-9 2011
[ACT334]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates. Proceedings of ICCS16, Porto (Portugal), 28-30 juin 2011
[ACT335]J. Astoul, M. Sartor, J. Geneix and E. Mermoz. A method for mastering the contact path location of spiral bevel gears by optimizing machine-tool settings. Proceedings of IEEE/IACSIT ICMERA 2010, International Conference on Mechanical Engineering, Robotics and Aerospace, Bucharest, Romania, December 2-4, 2010 2010
[ACT336]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Explicit simulation and high-performance computing, application to a bolt tensile test. Proceedings of IDMME-Virtual Concept 2010, Bordeaux, France 2010
[ACT337]J. Astoul, M. Sartor, J. Geneix and E. Mermoz. A simple and robust method for spiral bevel gear generation and tooth contact analysis. Proceedings of IDMME, Virtual Concept 2010, Bordeaux, France, October 20-22 2010
[ACT338]M. Paredes, N. Nefissi and M. Sartor. Study of an interference fit fastener assembly. Proceedings of IDMME, Virtual Concept 2010, Bordeaux, France, October 20-22 2010
[ACT339]J.-C. Maré and P.-E. Berthe. Design, virtual prototyping and test of a regenerative shock absorber for race cars. Proceedings of Bath/ASME Symposium on Fluid Power and Motion Control, Bath, England, 15-17 September p.447-460 2010
[ACT340]T. Marger, V. Budinger, J.-C. Maré and F. Malburet. Designing redundant metering valves for hydraulic actuators under mixability and low-cost constraints. Proceedings of Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, American Institute of Aeronautics and Astronautics, Fortworth, USA, 13-15 September 2010
[ACT341]T. Gouache, Y. Gao, P. Coste and Y. Gourinat. Lunar regolith simulant preparation and its impact on static penetration resistance and DRD penetration. Proceedings of European Planetary Science Congress, Roma 2010
[ACT342]M. Ilyas, C. Espinosa, F. Lachaud, L. Michel and M. Salaün. Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. Proceedings of 9th International Conference on Fracture and Damage Mechanics, 20-22 Sept 2010, Nagasaki (J) 2010 [OATAO]
[ACT343]B. Talgorn, S. Laporte, C. Bes and S. Segonds. One Engine Out Take-off Trajectory Optimization. Proceedings of 10th AIAA Aviation Technology, Integration, and Operations Conference, Forth Worth, Texas (USA), 13-15 September 2010
[ACT344]F.A.C. Viana, C. Gogu and R.T. Haftka. Making the most out of surrogate models: ticks of the trade. Proceedings of ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Canada, 15-18th August 2010
[ACT345]C. Gogu, W. Yin, R.T. Haftka, P.G. Ifju, J. Molimard, R. Le Riche and A. Vautrin. Applying a Bayesian Approach to Identification of Orthotropic Elastic Constants from Full Field Displacement Measurements. Proceedings of 14th International Conference on Experimental Mechanics, Poitiers, France, 4-9th July 2010
[ACT346]M.R. Shad , G. Michon and A. Berlioz. Analytical and numerical investigations of non linear dynamic of rotors taking into account the effect of dynamic axial force and shear deformations. Proceedings of XVIIth Symposium of Vibration Shock and Noise, Lyon 2010
[ACT347]F. Abevi, M. Chaussumier and A. Daidié. Contribution à l’étude du contact normal élastique dans un système de vis à rouleaux satellites d’actionneurs aéronautiques sous un chargement statique. Proceedings of Journées Internationales Francophones De Tribologie, Albi (France), 27-28 Mai 2010
[ACT348]R. Chieragatti, C. Espinosa, J.-L. Lacome, J. Limido, C. Mabru and M. Salaün. Détermination d’un kt local associé à la rugosité de surface; influence sur la tenue en fatigue. Proceedings of 29ème Journées de Printemps de la SF2M : Influence des procédés sur la tenue en fatigue, Rôle des défauts - Paris (France), Mai 2010 [OATAO]
[ACT349]B. Ducarouge, T. Sentenac, F. Bugarin and M. Devy. A Global Projective Rectification Approach for Uncalibrated Infrared Stereo Images. Proceedings of Fifth International Symposium on 3D$Data Processing, Visualization and Transmission (3DPVT 2010) 2010
[ACT350]H. Youssef, A. Ferrand, P. Pons and R. Plana. Loi de comportement de matériau composite déposé en couche mince. Proceedings of International Symposium on Aircraft Materials (ACMA 2010) 2010
[ACT351]A. Al Majid, M. Abdul Hamid and A. Berlioz. Comportement dynamique d'un disque de géométrie complexe. Application à une roue d’usinage . Proceedings of 4th International Francophone Congress for Advanced Mechanics”, University of Aleppo, SYRIA, 19-21, April 2010
[ACT352]M. Lalanne and A. Berlioz. Prediction of the Dynamic Behavior of Rotor. Proceedings of 4th International Francophone Congress for Advanced Mechanics, University of Aleppo, SYRIA, 19-21, April, 2010
[ACT353]H. Youssef, A. Ferrand, P. Pons and R. Plana. A new iterative algorithm for the solution for the load deflection square membranes . Proceedings of 11th International Conference on Thermal Mechanical and Multi-Physics Simulation and Experiments in Micro/Nanoelectronics and Systems (EuroSimE 2010) 2010
[ACT354]N. Roussouly, F. Petitjean, M. Salaün, F. Buffe and A. Carpine. Application des surfaces de réponse à l'analyse fiabiliste d'une structure spatiale. Proceedings of JFMS10 - Journées Fiabilité des Matériaux et des Structures - Toulouse (France), Mars 2010 [OATAO]
[ACT355]A. Berranger, A. Daidié and O. Paulien-camy. Mise en place d'Outils pour les Analyses de Fiabilité et de Robustesse des Attaches Pales – Disques de Turbomachines. Proceedings of 6èmes Journées Nationales de Fiabilité JFMS’10, Toulouse, France, 24-26 Mars 2010
[ACT356]F. Bugarin, D. Henrion, T. Sentenac, J.-B. Lasserre and J.-J. Orteu. Optimisation globale polynomiale appliquée à la rectification projective d'images non calibrées. Proceedings of 17ème Congrès Reconnaissance des Formes et Intelligence Artificielle (RFIA'2010), Caen (France), 19-22 janvier 2010 2010 [HAL]
[ACT357]J. Liscouet, M. Budinger and J.-C. Maré. Design for reliability of electromechanical actuators. Proceedings of Proceedings of the 4th international conference on Recent Advances in Aerospace Actuation Systems and Components, June 24-26 2010
[ACT358]J.-C. Maré. Towards more electric drives for embedded applications: (re)discovering the advantages of hydraulics. Proceedings of Proceedings of the 7th International Fluid Power Conference, Aachen, Germany, March 22-24 2010
[ACT359]F. Hospital, M. Budinger, J. Liscouet and J.-C. Maré. Model Based Methodologies for the Assessment of More Electric Flight Control Actuators . Proceedings of Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, American Institute of Aeronautics and Astronautics, Fortworth, USA, 13-15 September 2010
[ACT360]F. Samouda, S. Colin and C. Barrot. Molecular tagging velocimetry for gaseous microflows. Proceedings of 2nd International GASMEMS Workshop (GASMEMS10), Les Embiez, France p.GASMEMS2010-DY09:1-8 2010
[ACT361]A. Fraj, M. Budinger, T. El Halabi and J.-C. Maré. Coupling CAD and system simulation framework for the preliminary design of electromechanical actuators. Proceedings of Proceedings of IDMME - Virtual Concept 2010, Bordeaux, France, October 20 – 22 2010
[ACT362]F. Samouda, C. Barrot and S. Colin. Temperature influence on the hydrodynamics of gas flows in microchannels in the slip flow regime. Proceedings of 2nd European Conference on Microfluidics (µFlu'10), Toulouse, France p.µFLU2010-88:1-7 2010
[ACT363]T. El Halabi, M. Budinger and J.-C. Maré. Optimal geometrical integration of electromechanical actuators. Proceedings of Proceedings of the 4th internation conference on Recent Advances in Aerospace Actuation Systems and Components, June 24-26 2010
[ACT364]C. Barrot, S. Colin, L. Baldas, N. Laurien, S. Orieux, J.-L. Fraysse, D. Forêt, F. Casanova, O. Thuillard and D. Veale. A new setup for analysis of the performance of micropumps for drug delivery. Proceedings of 2nd European Conference on Microfluidics (µFlu'10), Toulouse, France p.µFLU2010-232:1-12 2010
[ACT365]C. Gogu, R.T. Haftka and R. Le Riche. Faciliter l’identification bayesienne à partir de mesures de champ par la méthode des surfaces de réponse et l’expansion de Karhunen Loeve. Proceedings of 6èmes Journées Nationales sur la Fiabilité, Toulouse, France, 24-26 mars 2010
[ACT366]W. Ghozlani, L. Baldas, A. Kourta, H.-C. Boisson and S. Colin. Design and experimental analysis of a microfluidic oscillator for active flow control. Proceedings of 2nd European Conference on Microfluidics (µFlu'10), Toulouse, France p.µFLU2010-182:1-11 2010
[ACT367]P. Magaud, S. Geoffroy, S. Colin and L. Baldas. A review on inertial focusing of particles in microchannels for separation and other applications. Proceedings of 2nd European Conference on Microfluidics (µFlu'10), Toulouse, France p.µFLU2010-195:1-13 2010
[ACT368]C. Renault, S. Colin, S. Orieux, P. Cognet and T. Tzédakis. Optimal design of a multi-channel microreactor for uniform residence time distribution. Proceedings of 2nd European Conference on Microfluidics (µFlu'10), Toulouse, France p.µFLU2010-144:1-12 2010
[ACT369]L. Szalmas, J. Pitakarnnop, S. Geoffroy, S. Colin and D. Valougeorgis. Computational and experimental investigation of binary gas flows through rectangular microchannels. Proceedings of 2nd International GASMEMS Workshop (GASMEMS10), Les Embiez, France p.GASMEMS2010-DY01:1-8 2010
[ACT370]L. Sanches, G. Michon, A. Berlioz and D. Alazard. Instability zones for isotropic and anisotropic multibladed rotor configurations. Proceedings of XVIIth Symposium of Vibration Shock and Noise, Lyon 2010
[ACT371]R. Shad, G. Michon and A. Berlioz. Nonlinear Dynamics of Rotors due to Large . Proceedings of International Conference on Mechanical and Aerospace Engineering (IEEE-ICMAE 2010),Kuala-Lumpur Malaisia 2010
[ACT372]L. Sanches, G. Michon, A. Berlioz and D. Alazard. INSTABILITY ZONES IDENTIFICATION IN MULTIBLADE ROTOR DYNAMICS. Proceedings of 11th Pan-American Congress of Applied Mechanics, Proceedings of PACAM XIJanuary 04-08, 2010, Foz do Iguaçu, PR, Brazil 2010
[ACT373]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, C. Ligu and C. Bosquet-galerne. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Proceedings of 10ème Colloque Méthodes et Techniques Optiques pour l'Industrie, Reims (France), 16-20 novembre 2009 2009
[ACT374]F. Maamar and M. Sartor. Using stresses obtained from a low detailed FE model and located at a reference point to quickly calculate the free-edge stress intensity factors of bonded joints. Proceedings of ICMIAE 2009 - International Conference on Mechanical, Industrial and Aerospace Engineering, World Congress on Science, Engineering and Technology WCSET 2009, Venice, Italy, October 28-30 p.Issue 58, p. 244-250 2009
[ACT375]G. Michon, A. Berlioz and C.-H. Lamarque. A parametrically excited oscillator involving coupling between inclined cable system and deck of stayed bridges. Proceedings of Experimental Vibration Analysis for Civil Engineering Structures - EVACES 09, Wroclaw, Poland, October 14-16 2009
[ACT376]P. Selva, J. Morlier and Y. Gourinat. A Matlab/Simulink model of the inner ear angular accelerometers sensors. Proceedings of ASME International Design Engineering Technical Conference & Computers Information in Engineering Conference, San Diego 2009 [OATAO]
[ACT377]A. Shahdin, J. Morlier and Y. Gourinat. Significance of Low Energy Impact Damage on Modal Parameters of Composite Beams by Design of Experiments. Proceedings of 7th International Conference on Modern Practice in Stress & Vibration Analysis, Cambridge, UK 2009 [OATAO]
[ACT378]T. Gouache, Y. Gao, P. Coste and Y. Gourinat. Experimental Parametric Evaluation of Dual-Reciprocating-Drilling Mechanism Performance. Proceedings of European Conference on Spacecraft Structures, Materials and Mechanical Testing (ECSSMMT) ESA/CNES/DLR, Toulouse 2009
[ACT379]M. Ilyas, C. Espinosa, F. Lachaud and M. Salaün. Dynamic delamination modeling using cohesive finite elements. Proceedings of 9th International DYMAT Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07-11 Sept 2009, Brussels (B) 2009 [OATAO]
[ACT380]R. Torres, J. Chaptal, C. Bes and J.B. Hiriart-urruty. Multi-Objective Clean Take-Off Flight Paths for Civil Aircraft. Proceedings of 9th AIAA Aviation Technology, Integration, and Operations Conference, Hilton Head, South Carolina (USA), 21-23 September 2009
[ACT381]B. Talgorn, S. Laporte, C. Bes and S. Segonds. Optimization of Payload Multi-Step Strategy. Proceedings of 9th AIAA Aviation Technology, Integration, and Operations Conference, Hilton Head, South Carolina (USA), 21-23 September 2009
[ACT382]G. Michon, A. Berlioz and C.-H. Lamarque. Experimental and Theoretical Investigation on Non Linear Behavior of Cable-Stayed Bridges. Proceedings of 7th International Conference on Multibody Systems, Nonlinear Dynamics and Control, San Diego, USA, Proceedings of ASME IDET Conferences and CIE Conference, Aug 30-Sep 02 p.813-819 2009
[ACT383]F. Maamar and M. Sartor. Using the relative displacements of the layer two interfaces to calculate the free-edge stress intensity factor of bonded joints. Proceedings of ICSAAM 2009 - International Conference on Structural Analysis of Advanced Materials, Tarbes, France, September 7-10 2009
[ACT384]H. Youssef, A. Ferrand, P. Pons and R. Plana. Iterative algorithm with finite element method for bulge test characterization. Proceedings of 20th MicroMechanics Europe workshop (MME 2009) 2009
[ACT385]N. Roussouly, F. Petitjean, M. Salaün, F. Buffe and A. Carpine. Reliability approach in spacecraft structures. Proceedings of ECSSMMT 2009 - 11th European Conference on Spacecraft Structures, Materials and Mechanical Testing - Toulouse (France), Septembre 2009 [OATAO]
[ACT386]C. Pozzolini, M. Salaün and F. Buffe. A localization and updating strategy of large finite element models in structural dynamics. Proceedings of ECSSMMT 2009 - 11th European Conference on Spacecraft Structures, Materials and Mechanical Testing - Toulouse (France), Septembre 2009 [OATAO]
[ACT387]M. Ilyas, J. Limido, F. Lachaud, C. Espinosa and M. Salaün. Modélisation SPH 3D de l'impact basse vitesse de plaque composite. Proceedings of 19 ème Congrés Français de Mécanique, 24-28 Aug 2009, Marseille (FR) 2009 [OATAO]
[ACT388]L. Sanchez, G. Michon, A. Berlioz and D. Alazard. Modélisation Dynamique d’un Rotor sur Base Flexible. Proceedings of CFM 2009, Marseille 2009
[ACT389]M. Ilyas, F. Lachaud, C. Espinosa and M. Salaün. Dynamic delamination of aeronautic structural composites by using cohesive finite elements. Proceedings of 17th International Conference on Composite Materials (ICCM-17), 27-31 July 2009, Edinburgh (GB) 2009 [OATAO]
[ACT390]J. Limido, M. Suraratchaï, C. Mabru, C. Espinosa, M. Salaün, R. Chieragatti and V. Vergnes. Machining parameters effects on surface and fatigue life of Aluminum alloy aeronautical parts. Proceedings of EUCASS 2009 - 3rd European Conference for Aero-Space Sciences - Versailles (France), Juillet 2009
[ACT391]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Static & Dynamic Testing of Glass Fiber Entangled Sandwich Beams : A Comparison with Honeycomb & Foam Sandwich Beams. Proceedings of International Conference on Composite Structures /15, Porto 2009 [OATAO]
[ACT392]M. Ilyas, F. Lachaud, C. Espinosa, L. Michel and M. Salaün. Modélisation en dynamique rapide du délaminage des composites à l’aide d’éléments finis cohésifs . Proceedings of 16èmes Journées Nationales sur les Composites (JNC 16), 10-12 Juin 2009, Toulouse (FR) 2009 [OATAO]
[ACT393]J.-L. Lacome, J. Limido and C. Espinosa. SPH formulation with Lagrangian Eulerian adaptive kernel. Proceedings of 4th SPHERIC Workshop, 27-29 mai 2009, Nantes (FR) 2009 [OATAO]
[ACT394]J. Limido, C. Espinosa, M. Salaün, C. Mabru and R. Chiergatti. High speed machining modelling : SPH method capabilities. Proceedings of 4th SPHERIC Workshop, mai 2009, Nantes (FR) 2009
[ACT395]M. Ilyas, C. Espinosa, F. Lachaud and M. Salaün. Simulation of dynamic delamination and mode I energy dissipation. Proceedings of 7th European LS-DYNA Conference, 14-15 Mai 2009, Salzburg (A) 2009 [OATAO]
[ACT396]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction, . Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT397]J. Morlier, B. Chermain and Y. Gourinat. Original Statistical Approach for the Reliability in Modal Parameters Estimation. Proceedings of IMAC-XXVII Conference on Structural Dynamics, Orlando 2009 [OATAO]
[ACT398]J.-C. Maré and M. Budinger. Comparative analysis of energy losses in servo-hydraulic, electro-hydrostatic and electro-mechanical actuators . Proceedings of The 11th Scandinavian International Conference on Fluid Power, SICFP’09, Linköping, Sweden, June 2-4 2009
[ACT399]M. Budinger, J. Liscouet, Y. Cong and J.-C. Maré. Model based Design of Electromechanical Actuators with Modelica. Proceedings of IDETC 09, San Diego, 30 aout, 2 septembre 2009. 2009
[ACT400]L. Allain, M. Budinger, J. Liscouet, Y. Lefevre, J. Fontchastagner and A. Abdenour. Preliminary Design of Electromechanical Actuators with Modelica. Proceedings of Modelica 2009, Proceedings 7th Modelica Conference, Como, Italy, Sep. 20-22, 2009. 2009
[ACT401]F. Pennec, D. Peyrou, D. Leray, C. Villeneuve, A. Coustou, P. Calmon, P. Pons, R. Plana and F. Courtade. DC contact modeling of electrostatically actuated switches with low voltage. Proceedings of Micromechanics and Microsystems Europe Workshop 2009 2009 [HAL]
[ACT402]S. Colin, L. Baldas and G.L. Morini. The GASMEMS Network: rationale, programme and initial results. Proceedings of 2nd Micro and Nano Flows Conference (MNF2009), West London, UK p.MNF2009-84:1-8 2009
[ACT403]J. Pitakarnnop, S. Misdanitis, D. Valougeorgis, S. Colin, L. Baldas and S. Geoffroy. Flow of gas mixtures through rectangular microchannels in slip flow and early transition regimes. Proceedings of 1st International GASMEMS Workshop (GASMEMS09), Eindhoven, The Netherlands p.GASMEMS09-11:1-9 2009
[ACT404]J. Limido, C. Espinosa, M. Salaün, J.-L. Lacome, C. Mabru and R. Chieragatti. Metal cutting analysis : SPH approach. Proceedings of JSTMM08 - 6th Scientific and Technical Symposium on Manufacturing and Materials - Monastir (Tunisie), Novembre 2008 [OATAO]
[ACT405]A. Coppe, R.T. Haftka, N.H. Kim and C. Bes. A Statistical Model for Estimating Probability Crack Detection. Proceedings of IEEE Reliability Society, International Conference on Prognostic and Health Management, Denver, Colorado (USA), 6-7 October 2008
[ACT406]T. Dericquebourg, A. Daidié, F. Debarle and M. Sartor. An original global-local approach for predimensioning multi-bolted joints. Proceedings of Proceedings of the 7th International Conference IDMME-Virtual Concept 2008, Beijing, China, October 8-10, 2008. 2008
[ACT407]Y. Gourinat, U. Apel and R. Vockenroth. A concrete opportunity for man-machine complementarity test. Proceedings of International Astronautical Congress p.[IAC-08-A5.1.5] 2008 [OATAO]
[ACT408]Y. Gourinat, U. Apel and F. Delbart. The Aerocrew Mission : Training Space Session at Ny Aalesund Arctic Base. Proceedings of International Astronautical Congress p.[IAC-08-E1.4.2] 2008 [OATAO]
[ACT409]A. Barrot, A. Daidié and A. Ghosn. A FE global approach for dimensioning bolted joints in large size slewing bearing: application to an industrial case. Proceedings of IDMME-Virtual Concept 2008, Beijing, China, October 8-10 2008
[ACT410]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, P. Barbeau and G. Marin. Inspection of aeronautics parts for shape defect detection using a multi-camera system. Proceedings of SEM XI International Congress on Experimental and Applied Mechanics, Orlando, Florida (USA), 2-5 June 2008 2008
[ACT411]M. Budinger, J. Liscouet, S. Orieux and J.-C. Maré. Automated preliminary sizing of electromechanical actuator architectures. Proceedings of ELECTRIMACS 2008, Québec 2008
[ACT412]C. Espinosa, J.-L. Lacome, J. Limido, M. Salaün, C. Mabru and R. Chieragatti. Modeling High Speed Machining with the SPH Method. Proceedings of 10th International LS-DYNA(R) Users Conference, June 2008, Dearborn (USA) 2008
[ACT413]J. Harvent, F. Bugarin, J.-J. Orteu, M. Devy, P. Barbeau and G. Marin. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Proceedings of Journées COFREND 2008, Toulouse-Labège (France), 20-22 mai 2008 2008
[ACT414]H. Achkar, D. Peyrou, F. Pennec, K. Yacine, A. Ferrand, P. Pons, M. Sartor and R. Plana. Matlab Code to Link and Pilot Softwares Used for MEMS Simulation. Proceedings of Advanced Computational Methods in Engineering 2008, Liège : Belgium (2008), 26-28 May 2008 [HAL]
[ACT415]H. Achkar, F. Pennec, D. Peyrou, M. Sartor, R. Plana and P. Pons. Use The Reverse Engineering Technique To Link COMSOL and ANSYS Softwares. Proceedings of 9th. Int. Conf. on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE 2008, Freiburg, Germany, 20-23 April 2008. 2008 [DOI]
[ACT416]V. Blanchot and A. Daidié. Study and numerical characterisation of a riveting process. Proceedings of ESAFORM 2008, Lyon, France, April 23-25 2008
[ACT417]J. Liscouet, S. Orieux, M. Budinger and J.-C. Maré. Electromechanical nose gear steering actuator – study of high reliability architectures . Proceedings of Conference SAE A- Landing Gear Systems – The21st century, Toulouse, 8-10 april 2008. 2008
[ACT418]J. Pitakarnnop, S. Varoutis, D. Valougeorgis, S. Geoffroy, N. Laurien and S. Colin. New experimental setup for accurate measurement of gas microflows. Proceedings of 1st European Conference on Microfluidics (µFlu'08). Bologna, Italy p.µFLU2008-167:1-15 2008
[ACT419]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of BEM-based Cooling Channels Injection Moulding Using Model Reduction. Proceedings of International Journal of Material Forming 2008 [DOI]
[ACT420]C. Barrot and S. Colin. Electroosmotic flow in tree-shaped microchannel networks. Proceedings of ASME 2008 6th International Conference on Nanochannels, Microchannels and Minichannels p.419-426 2008 [DOI]
[ACT421]T. Dericquebourg, F. Debarle, M. Sartor and A. Daidié. Vers un outil d’assistance au choix d’une configuration d’assemblage vissé en phase d’avant-projet. Proceedings of 7e Conférence Internationale de MOdélisation et SIMulation - MOSIM’08 - du 31 mars au 2 avril 2008, Paris, France 2008
[ACT422]C. Barrot, S. Colin and G.L. Morini. Etude des effets de dissipation visqueuse dans les écoulements de liquides en microcanaux. Proceedings of Congrès Français de Thermique - Thermique Aéronautique et Spatiale (SFT 2008), Toulouse, France, Vol. 2 p.501-506 2008
[ACT423]J. Limido, M. Suraratchai, C. Mabru, C. Espinosa, M. Salaün and R. Chieragatti. Machining parameters effects on fatigue life of aluminum alloy aeronautical parts. Proceedings of Fatigue Design 2007 - International Conference on the respective input of the numerical simulation and the experimental approach in fatigue design - Senlis (France), Novembre 2007 [OATAO]
[ACT424]A. Batikh, L. Baldas, R. Caen, S. Colin, A. Kourta and H.C. Boisson. Experimental study of the influence of synthetic, continuous and pulsed jets on the control of a wall flow. Proceedings of First French-Chinese Symposium on Microfluidics (1FCSM), Beijing, China 2007
[ACT425]J. Pitakarnnop, S. Colin, L. Baldas and S. Geoffroy. Slip flow in microchannels: numerical simulation with a commercial CFD code. Proceedings of First French-Chinese Symposium on Microfluidics (1FCSM), Beijing, China 2007
[ACT426]N. Pirc, F. Schmidt, F. Bugarin and M. Mongeau. Cooling Channel Optimisation for injection molding. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT427]F. Viniacourt, C. Bes and J. Neveux. Maintenance Programme Task Intervals Evolution on Civil Aircraft: A method Based on In-Service Data. Proceedings of European Safety, Reliability & Data Association, 32nd Congress on Maintenance Modelling and Applications, Alghero, Italy, May 8-9 2007
[ACT428]P. Destuynder, Y. Moguen and M. Salaün. Adaptation de maillage avec approximation de la géométrie pour le calcul de coques minces. Proceedings of Giens 2007 - 8ème Colloque National en Calcul des Structures - Giens (France), Mai 2007
[ACT429]J. Lasry, J. Pommier, Y. Renard and M. Salaün. Application de la méthode XFEM aux plaques fissurées en flexion. Proceedings of Giens 2007 - 8ème Colloque National en Calcul des Structures - Giens (France), Mai 2007
[ACT430]J. Limido, C. Espinosa and M. Salaün. Modélisation 3D des efforts de coupe et de la surface en UGV à partir d'un modèle numérique 2D. Proceedings of Giens 2007 - 8ème Colloque National en Calcul des Structures - Giens (France), Mai 2007 [OATAO]
[ACT431]C. Espinosa, Y. De Lassat De Pressigny, P. Bordenave and L. Henke. Fluid-structure interaction simulation of parachute dynamic behaviour. Proceedings of 19th AIAA - Aerodynamic Decelerator Systems Technology Conference and Seminar, 21-24 May 2007, Williamsburg (USA) 2007 [OATAO]
[ACT432]R. Khelfaoui, B. Benyoucef and S. Colin. Micro mixture: sixe effect of micro mixing. Proceedings of 2007 NSTI Natotechnology Conference and trade Show - Nanotech 2007. Santa Clara, USA p.201-204 2007
[ACT433]A. Batikh, L. Baldas, R. Caen, S. Colin, A. Kourta and H.-C. Boisson. Behavior of a mini synthetic jet in a transverse wall flow: experimental and numerical study. Proceedings of ASME 5th International Conference on Nanochannels, Microchannels and Minichannels p.651-660 2007 [DOI]
[ACT434]R. Khelfaoui, S. Colin, R. Caen, S. Orieux and L. Baldas. Numerical and experimental analysis of monostable mini- and micro-oscillators. Proceedings of ASME 5th International Conference on Nanochannels, Microchannels and Minichannels p.717-724 2007 [DOI]
[ACT435]A. Batikh, A. Kourta, H.-C. Boisson, L. Baldas, R. Caen and S. Colin. Numerical and experimental study of mini synthetic jets actuators for flow control. Proceedings of 2nd International Francophone Congress for Advanced Mechanics (IFCAM02). Alep, Syria 2007
[ACT436]S. Chiavarolli, D. Newport, G.L. Morini, C. Barrot Lattes, L. Baldas and S. Colin. Influence of concentration and number of image pairs in µ-PIV experiments. Proceedings of 5th Joint ASME/JSME Fluids Engineering Conference (FEDSM2007), San Diego, California, USA p.1-6 2007 [DOI]
[ACT437]A. Vabre, S. Legoupil, S. Colin, S. Geoffroy, W.-K. Lee and K. Fezzaa. X-ray propagation-base phase-enhanced imaging of the meniscus of a capillary flow in a rectangular microchannel. Proceedings of 3rd French Microfluidics Conference (µFlu'06), Toulouse, France p.µFLU2006-20:1-10 2006
[ACT438]J. Pitakarnnop, S. Geoffroy, S. Colin and L. Baldas. Slip flow in triangular and trapezoidal microchannels. Proceedings of 3rd French Microfluidics Conference (µFlu'06), Toulouse, France p.µFLU2006-71:1-12 2006
[ACT439]A. Batikh, R. Caen, S. Colin, L. Baldas, A. Kourta and H.-C. Boisson. Numerical and experimental study of micro synthetic jets for active flow control. Proceedings of 3rd French Microfluidic Conference (µFlu'06), Toulouse, France p.µFLU2006-70:1-13 2006
[ACT440]L. Saintis, E. Hugues, C. Bes and M. Mongeau. Methods to Assess the Operational Reliability of an Aircraft System : Problem of Dependency Between Components States. Proceedings of Congrés Lamda-Mu, Lille, France, 10-12 Octobre 2006
[ACT441]M. Romero, B. Escudier and Y. Gourinat. Hands-on Education & Students Formation for Aerospace Systems Engineering : the Soprano experience. Proceedings of 57th IAC, Valencia p.IAC-06-E1.P.1.03 2006 [OATAO]
[ACT442]J.-J. Orteu, D. Garcia, L. Robert and F. Bugarin. A Speckle Texture Images Generator. Proceedings of Speckle'06 International Conference, Nîmes (France), 13-15 September 2006 p.63410H.1-63410H.6 2006 [DOI]
[ACT443]B. Lienhardt and C. Bes. Integration of Design to Support as Part of Aircraft Development. Proceedings of 25th International Congress of Aeronautical Sciences, Hamburg, Germany, September 3-8 2006
[ACT444]J. Limido, C. Espinosa, M. Salaün and J.-L. Lacome. A new approach of high speed cutting modelling: SPH method. Proceedings of 8th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading DYMAT 2006, Dijon (FR) 2006 [OATAO]
[ACT445]Y. Michel, N. Le Roux, C. Durin, C. Espinosa, A. Moussi, J.-M. Chevalier and J.-J. Barrau. Damages and matter ejection during HVI on brittle structures: implications for space environment. Proceedings of 10th International Symposium on Materials in a Space Environment & 8th International Conference on Protection of Materials and Structures in a Space Environment, 19-23 June 2006, Collioure (FR) 2006 [OATAO]
[ACT446]Y. Michel, J.-M. Chevalier, C. Durin, C. Espinosa, F. Malaise and J.-J. Barrau. Meshless modelling of dynamic behaviour of glasses under intense shock loadings: application to matter ejection during high velocity impacts on thin brittle targets.. Proceedings of 8th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading DYMAT 2006, Dijon (FR) 2006 [DOI] [OATAO]
[ACT447]E. Paroissien, M. Sartor, J. Huet and F. Lachaud. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts: Analytical Two-Dimensional Model of a Hybrid (Bolted/Bonded) Single-Lap Joint. Proceedings of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference (47th SDM AIAA) 2006
[ACT448]E. Paroissien, M. Sartor and J. Huet. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts: Analytical One-Dimensional Models of a Single-Lap Joint,. Proceedings of 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (6th IDMME) 2006
[ACT449]D. Peyrou, P. Pons, H. Granier, D. Leray, A. Ferrand, K. Yacine, M. Saadaoui, A. Nicolas, J. Tao and R. Plana. Multiphysics softwares benchmark on ANSIS/COMSOL applied for RF MEMS switches packaging simulations. Proceedings of 7th International Conference Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems (EuroSimE'2006), Como (Italie) 2006
[ACT450]G.L. Morini, M. Lorenzini, S. Colin and S. Geoffroy. Experimental investigation of the compressibility effects on the friction factor of gas flows in microtubes. Proceedings of ASME 4th International Conference on Nanochannels, Microchannels and Minichannels, Parts A and B p.411-418 2006 [DOI]
[ACT451]S. Geoffroy, S. Colin, G.L. Morini and M. Lorenzini. Experimental analysis of laminar-to-turbulent transition for gas flows in smooth microtubes. Proceedings of ASME 4th International Conference on Nanochannels, Microchannels and Minichannels, Parts A and B p.419-425 2006 [DOI]
[ACT452]C. Barrot Lattes, D. Newport, S. Chiavaroli, G.L. Morini, S. Colin and L. Baldas. 3-D reconstruction of velocity profiles in rectangular microchannels. Proceedings of 3rd French Microfluidics Conference (µFlu'06), Toulouse, France p.µFLU2006-78:1-11 2006
[ACT453]M. Sutra, B. Combes and A. Berlioz. Etude expérimentale et numérique d’un équipement électronique soumis à un choc pyrotechnique. Proceedings of XVème Colloque Vibrations, Chocs et Bruit, E.C.Lyon,14-16 juin 2006 2006
[ACT454]S. Colin, S. Geoffroy, M. Lorenzini and G.L. Morini. Experimental investigation of the compressibility effects on the friction factor of gas flows in microtubes. Proceedings of 2nd ECI International Conference on Transport Phenomena in Micro and Nanodevices. Barga, Italy 2006
[ACT455]G.L. Morini, M. Lorenzini, S. Colin and S. Geoffroy. Analisi sperimentale di deflussi gassosi in microtubi. Proceedings of XXIV Congresso Nazionale UIT sulla Trasmissione del calore, Napoli, Italy p.1-8 2006
[ACT456]Y. Michel, J.-M. Chevalier, C. Durin, C. Espinosa and F. Malaise. Hypervelocity impacts on thin brittle targets: experimental data and SPH simulations. Proceedings of HVIS 2005 - Hypervelocity Impact Symposium, 10-14 Oct 2005, Lake Tahoe, United States 2005 [DOI] [OATAO]
[ACT457]P. Laborde, J. Pommier, Y. Renard and M. Salaün. Sur la précision des méthodes XFEM en mécanique de la rupture. Proceedings of CFM 2005 - 17ème Congrès Français de Mécanique - Troyes (France), Septembre 2005
[ACT458]E. Paroissien, M. Sartor and J. Huet. Contribution aux assemblages hybrides (boulonnés/collés) aéronautiques : modèle analytique monodimensionnel. Proceedings of 17ème Congrès Français de Mécanique (17ème CFM) 2005
[ACT459]E. Hugues, B. Lienhardt and C. Bes. Maintenance Optimisation Model for Design to Support in Aeronautics. Proceedings of European Safety and Reliability Conference, Tri City, Poland, 27- 30, June 2005
[ACT460]M. Suraratchai, C. Mabru, C. Espinosa and R. Chieragatti. Rôle de la rugosité d'une surface usinée sur la fatigue d'un alliage d'aluminium aéronautique. Proceedings of 24èmes Journées de Printemps SF2M 2005
[ACT461]P. Laborde, J. Pommier, Y. Renard and M. Salaün. Méthodes XFEM d'ordre supérieur en mécanique de la rupture. Proceedings of Giens 2005 - 7ème Colloque National en Calcul des Structures - Giens (France), Mai 2005
[ACT462]C. Bauer, C. Bes and M. Mongeau. Actuators Optimization Design for Aircraft Roll Manoeuvrabilit. Proceedings of 46th AIAA/ASME/AHS and 1st Multidisciplinary Design Optimization Conference, Austin, Texas, USA, April 18-21 2005
[ACT463]Y. Michel, A. Moussi, C. Durin, C. Espinosa, J.-M. Chevalier and J.-C. Mandeville. Damaging and ejection processes during HVI on brittle targets: experimental data and comparison with numerical simulation using a SPH method . Proceedings of 4th European Conference on Space Debris, 18-20 April 2005, Darmstadt (D) 2005 [OATAO]
[ACT464]C. Bauer, M. Mongeau, C. Bes and K. Lagadec. Optimisation de l’Architecture de Roulis des AIRBUS. Proceedings of 6éme Congrés de la Société Française de Recherche Opérationnelle et d’Aide à la Décision, Tours, France, 14-16 Fevrier 2005
[ACT465]V. Guerriero, L. Baldas and R. Caen. Numerical Solutions of Compressible Flow Mixing in Coanda Ejectors. Proceedings of Height International Symposium on Fluid Control, Measurement and Visualization (8FLUCOME), Chengdu, China p.P343:1-7 2005
[ACT466]J. Mueller, R. Ferrer, T. Krysinski, Y. Gourinat and B. Kerdreux. A Multibody Study on Single- and Multi-Variable Control Algorithms for Tiltrotor Whirl Flutter Stability Augmentation. Proceedings of 4th Decennial Specialist’s Conference on Aeromechanics, American Helicopter Society, San Francisco 2004 [OATAO]
[ACT467]A. Batikh, L. Baldas, R. Caen and S. Colin. Contrôle actif en aérodynamique au moyen de micro actionneurs fluidiques. Proceedings of 2ème Congrès Français de Microfluidique (µFlu'04), Toulouse, France p.P67 2004
[ACT468]K. Curran, S. Colin, L. Baldas and M. Davies. Unstable coalescence in the mixing of microcapilarry suspended aqueous droplets in silicone oil. Proceedings of 2ème Congrès Français de Microfluidique (µFlu'04), Toulouse, France p.P60 2004
[ACT469]C. Lattes, S. Colin, S. Geoffroy and L. Baldas. Effets de la double couche électrique sur un écoulement de Poiseuille. Proceedings of 2ème Congrès Français de Microfluidique (µFlu'04), Toulouse, France p.P48 2004
[ACT470]A. Vabre, S. Legoupil, E. Manach, O. Gal, S. Colin, S. Geoffroy and A.-M. Gué. Evaluation d'une méthode d'imagerie X en microfluidique : cas du remplissage de microcanaux en forme de "T". Proceedings of 2ème Congrès Français de Microfluidique (µFlu'04), Toulouse, France p.P59 2004
[ACT471]S. Didierjean, L. Michel, J.-J. Barrau and E. Paroissien. Predicting the Behavior of Graphite/Epoxy Laminates under Hydrothermal Loads. Proceedings of EUROMECH453 2003
[ACT472]U. Apel, B. Escudier, Y. Gourinat, J.L. Bozet and E. Weinrich. The CVA Summer School on Launcher Technology & Space Applications, a success story. Proceedings of 54th IAC, Bremen 2003
[ACT473]C. Mabru, C. Espinosa and R. Chieragatti. Étude thermomécanique d’une nouvelle géométrie d’éprouvette de fatigue en environnement sévère. Proceedings of 16 ème Congrès Français de Mécanique 2003 [OATAO]
[ACT474]S. Colin, P. Lalonde and R. Caen. Gaseous flows in rectangular microchannels: experimental validation of a second-order slip flow model. Proceedings of 1st International Conference on Microchannels and Minichannels p.433-440 2003 [DOI]
[ACT475]L. Baldas, R. Caen and S. Colin. Experimental and numerical study of vortex fluidic diodes. Proceedings of 7th International Symposium on Fluid Control, Measurement and Visualisation (FLUCOME'03), Sorrento, Italy p.P117 2003
[ACT476]S. Colin, T.G. Elizarova, Y.V. Sheretov, J.-C. Lengrand and H. Camon. Micro-écoulements gazeux : validation expérimentale de modèles QHD et de Navier-Stokes avec conditions aux limites de glissement. Proceedings of 16ème Congrès Français de Mécanique, Nice, France p.P139 2003
[ACT477]S. Tardu, S. Colin and H. Camon. Effets interfaciaux sur la stabilité linéaire des écoulements dans les microcanaux. Proceedings of 16ème Congrès Français de Mécanique, Nice, France p.P12 2003
[ACT478]A. Rémondière, B. Escudier and Y. Gourinat. Space-Related Education as a Whole. Proceedings of 53rd IAC, Houston p.IAC-02-P.2.08 2002
[ACT479]S. Segonds, Y. Landon, G. Cohen and P. Lagarrigue. Virtual Reality : Application to the turning center. Proceedings of 18th Conference on Manufacturing Research, Leeds, United Kingdom, May 27–31, 2002 2002
[ACT480]A. Salem and Y. Gourinat. Evaluation of Linear and Non-linear Structural Internal Damping. Experimental and Numerical Investigations. Proceedings of 10th International Conference on Applied Mechanics and Mechanical Engineering, Cairo 2002 [OATAO]
[ACT481]R. Chieragatti, C. Mabru, C. Espinosa and F. Rézaï-aria. A new specimen for fatigue investigations . Proceedings of High Temperature Fatigue CAMP2002 ; Paderborn (D), p.207-213 2002
[ACT482]S. Colin, M. Anduze, P. Lalonde, R. Caen and L. Baldas. Analyse d'écoulements liquides ou gazeux en microconduites : découplage des incertitudes expérimentales. Proceedings of Microfluidique 2002 - Micro-écoulements gazeux, phénomènes physiques et applications p.229-238 2002
[ACT483]G. Balint, L. Baldas, J. Rohacs, R. Caen and S. Colin. Etude numérique de microdiodes de type convergent/divergent. Proceedings of Microfluidique 2002 - Micro-écoulements gazeux, phénomènes physiques et applications 2002
[ACT484]U. Apel, Y. Gourinat and B. Escudier. The CVA Summer School on Launcher Technology and Space Applications. A Successful approach to a multinational cross-community program of space education. Proceedings of 52nd IAC, Toulouse p.IAF/ISSAT/ISU-01-P.1 2001
[ACT485]Y. Gourinat, E. Delente and A. Pasquier. Newton's Collision Fluid Mechanics : Educational Applications on Hypersonic Curves of Reentry Bodies. Proceedings of 52nd IAC, Toulouse p.IAF/ISSAT/ISU-01-P.1 2001 [OATAO]
[ACT486]N. Raimbault, C. Bes and P. Fabre. Neural Aircraft Autopilot Gain Adjuster. Proceedings of IFAC Symposium on Automatic Control and Aerospace, Bologne, Italy, 2-5 September 2001
[ACT487]C. Bes. Méthodes et Techniques d’Optimisation en Mécanique. Proceedings of Journées Scientifiques pour l’Ingénieur, Université B. Pascal, Clermont-Ferrand, 1-2 Mars 2001
[ACT488]P. Lalonde, S. Colin, R. Caen and M. Anduze. Ecoulements gazeux dans des microconduites de section rectangulaire : étude expérimentale et validation de modèles analytiques. Proceedings of 15ème Congrès Français de Mécanique, Nancy, France p.611:1-6 2001
[ACT489]J. Englund and Y. Gourinat. Educational Cooperation for France-Sweden Polar Simulations for Long Range Flight. Proceedings of 51st IAC, Rio de Janeiro p.IAF-00-P.3.08 2000
[ACT490]Y. Gourinat and J. Englund. Sweden Specific Polar Experiments for Long Range Flight Ergonomics. Proceedings of 51st IAC, Rio de Janeiro p.IAF/IAA-00-G.3.02 2000 [OATAO]
[ACT491]C. Bes. Modélisations dans le Domaine de l’Aéronautique. Proceedings of 8èmes Journées du groupe Mode de la SMAI, Toulouse, 23-25 Mars 2000
[ACT492]P. Lalonde, S. Colin and R. Caen. Gaz flow measurements in microsystems. Proceedings of 1st International Colloquium on Microhydrodynamics. Courbevoie, France p.1-12 2000
[ACT493]Y. Gourinat and B. Guirado. Landing design and test of astronaut seat and interfaces in Aerospatiale’s Crew Transfer Vehicle. Proceedings of 50th IAC, Amsterdam 1999
[ACT494]S. Orieux, L. Baldas and R. Caen. Étude expérimentale de l'écoulement dans un éjecteur supersonique à effet Coanda. Proceedings of 14ème Congrès Français de Mécanique, Toulouse 1999
[ACT495]Y. Gourinat and A.S. Pramono. Educational Applications of Photoelastodynamics for Solid Mechanics & Dynamics of Structures. Proceedings of Euromech406 Image Processing/Applied Mechanics, European Mechanics Society p.101-104 1999 [OATAO]
[ACT496]C. Bes, M. Cormery and S. Grihon. Optimisation Multidisciplinaire. Proceedings of 31ème Congrès National d’Analyse Numérique, Ax-Bonascre, 17-21 Mars 1999
[ACT497]M. Dilhan, J. Tasselli, D. Estève, P. Temple-boyer, H. Camon, M. Anduze and S. Colin. Experimentation of an electrostatically actuated monochip micropump for drug delivery. Proceedings of Design, Test and Microfabrication of MEMS/MOEMS p.887-896 1999 [DOI]
[ACT498]C. Aubert and S. Colin. Slip flow dans des microcanaux de section rectangulaire : influence des termes d'ordre deux dans les conditions aux limites. Proceedings of 14ème Congrès Français de Mécanique, Toulouse, France p.190:1-6 1999
[ACT499]M. Anduze, S. Colin and P. Lalonde. Mise au point et validation d'un banc d'essais pour la mesure de microdébits liquides. Proceedings of 14ème Congrès Français de Mécanique, Toulouse, France p.196:1-6 1999
[ACT500]Y. Gourinat and L.M. Jagger. Spacecraft Architectural Design with Minimal Artificial Weightiness Concept. Proceedings of 49th IAC, Melbourne p.IAF/IAA-98-G.3.02 1998 [OATAO]
[ACT501]C. Bes, E. Hugues and S. Grihon. Quelques Exemples d’Applications des Mathématiques dans le Domaine Aéronautique. Proceedings of Journées sur la pratique de l’enseignement des mathématiques appliquées dans les écoles d’ingénieurs, ENSEEIHT, Toulouse, 7-8 Septembre 1998
[ACT502]S. Colin, M. Anduze and R. Caen. A pneumatic frequency generator for experimental analysis of unsteady microflows. Proceedings of Micro-Electro-Mechanical Systems (MEMS) -1998- ASME, vol. DSC-66 p.231-239 1998
[ACT503]C. Aubert, S. Colin and R. Caen. Unsteady gaseous flows in tapered microchannels. Proceedings of First International Conference on Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (MSM'98). Santa Clara Marriot, USA p.486-491 1998
[ACT504]F. Benyahia, L. Michel and Y. Gourinat. Approche Expérimentale et Numérique de l’amerrissage d’une capsule spatiale de type CTV-ARD. Proceedings of 16th Canadian Congress of Applied Mechanics, Montréal 1997
[ACT505]F. Lachaud, N. Khemiri, Y. Gourinat and L. Michel. Orientation des fibres dans les matrices organiques et propagation du délaminage en mode I. Proceedings of 16th Canadian Congress of Applied Mechanics, Montréal 1997
[ACT506]Y. Gourinat and F. Benyahia. Splashdown and landing of spacecrafts. Computations and Tests. Proceedings of 1st European Dyna Conference, Stratford-upon-Avon p.6.1-6.6 1997
[ACT507]F. Garnier, R. Caen and S. Colin. Simulation et expérimentation du comportement d'une pince pneumatique soumise à des vibrations. Proceedings of 13ème Congrès Français de Mécanique, Poitiers, France, Vol. 2 p.307-310 1997
[ACT508]C. Aubert, I. Mas and S. Colin. Propagation d'ondes de pression dans les microcanaux de section lentement variable. Proceedings of 13ème Congrès Français de Mécanique, Poitiers, France, Vol. 3 p.75-78 1997
[ACT509]E. Hugues, C. Bes and M. Samualides. Approximation of Aircraft Take-off Performances by Multilayer Neural Networks. Proceedings of IEEE International Conference on Tools with Artificial Intelligence, Toulouse, November 1996
[ACT510]F. Benyahia, L. Michel and Y. Gourinat. Étude Expérimentale du Flambage Dynamique de Plaques Métalliques et Composites. Proceedings of 15th Canadian Congress of Applied Mechanics, Victoria 1995
[ACT511]P. Casu, M. Febrer, Y. Gourinat and L. Michel. Single Curvature Composite Shell under Transverse Static Load. Delamination Criterion. Proceedings of 15th Canadian Congress of Applied Mechanics, Victoria 1995
[ACT512]J.-M. Builles and C. Bes. Une Méthode d’Identification en Aéroélasticité Dynamique. Proceedings of 2ème Colloque National en Calcul des Structures, Giens, 16-19 1995
[ACT513]P. André, M. Arous, R. Bourquin, R. Caen and S. Colin. Electropneumatic servovalve controlled by a buckling blade. Proceedings of 9th World Congress on the Theory of Machines and Mechanisms (IFTOMM'95). Milano, Italy p.3081-3084 1995
[ACT514]C. Bes. Recalage des Matrices de Masse et de Raideur du Modèle Condensé avec Application sur Airbus. Proceedings of Table ronde sur les Nouveaux Enjeux en Dynamique des Structures, Ecole Centrale de Lyon, Lyon, 9 Février, 1994 et Atelier Aérospatial/France-Canada 9-11 Mai, ENSICA, Toulouse 1994
[ACT515]F. Garnier, S. Colin and R. Caen. Dynamic behaviour of a transversally sensitive pneumatic force sensor. Proceedings of 2nd European Robotics and Intelligent Systems Conference (EURISCON'94), Malaga, Spain, Vol. 3 p.1641-1650 1994
[ACT516]S. Colin, F. Garnier and R. Caen. Static modelling of a pneumatic force sensor with transverse sensitivity. Proceedings of 11th Aachen Colloquim on Fluid Power Technology (AFK'94), Aachen, Germany p.267-281 1994
[ACT517]S. Colin, R. Caen, R. Bourquin and P. André. Analysis of an original electropneumatic servovalve. Proceedings of 2nd European Robotics and Intelligent Systems Conference (EURISCON'94). Malaga, vol. 2 p.757-766 1994
[ACT518]S. Colin, A. Bonnet and R. Caen. A new high supply pressure pneumatic flapper-nozzle with linear behavior. Proceedings of Fluid Power Systems and Technology, Winter Annual Meeting of the ASME, New York, vol. FPST-1 p.1-10 1994
[ACT519]R. Caen, S. Colin and L. Baldas. A pneumatic potentiometer with piloted impedance. Proceedings of Fourth Triennal International Symposium on Fluid Control, Measurement and Visualization (FLUCOME'94). Toulouse p.1006 & 1051-1055 1994
[ACT520]L. Baldas, R. Caen and S. Colin. Dynamic behaviour of an ejector-suction cup system for vacuum prehension. Proceedings of 2nd European Robotics and Intelligent Systems Conference. Malaga, Spain, vol. 2 p.767-782 1994
[ACT521]S. Grihon and C. Bes. Une Nouvelle Méthode de Recalage en Dynamique des Structures : le Recalage Spectral. Proceedings of Congrès STRUCOME : Analyse des Structures, Paris, 8-10 décembre 1993
[ACT522]S. Grihon and C. Bes. How to Cancel the Adverse Suspension Effect on Measurement for Ground Vibrations Tests. Proceedings of Forum International Aeroelasticite et Dynamique des Structures, Strasbourg, 24-26 mai 1993
[ACT523]S. Colin and R. Caen. Influence de la géométrie des buses sur le comportement des potentiomètres pneumatiques. Proceedings of 11ème Congrès Français de Mécanique, Lille, France p.353-356 1993
[ACT524]S. Colin. Vibrations dans les potentiomètres pneumatiques à buse et palette. Proceedings of 11ème Congrès Français de Mécanique, Lille, France p.349-352 1993
[ACT525]L. Baldas, R. Caen and J. George. Débit aspiré dans les éjecteurs supersoniques des systèmes de préhension par le vide. Proceedings of 11ème Congrès Français de Mécanique, Lille, France p.301 - 304 1993
[ACT526]F. Collombet and C. Espinosa. Simulation of through matrix cracking damage history sustained by laminated composite plates during transverse impact. Proceedings of ISIE Sendai 2-4 Novembre 1992 p.412-417 1992
[ACT527]C. Bes and J. Locatelli. Structural Optimization at Aerospatiale Aircraft. Proceedings of 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Dallas, USA, April 13-17 1992
[ACT528]C. Espinosa, F. Collombet and J.-L. Lataillade. Simulation of matrix cracking damage history sustained of laminated composite plates during transverse impact. Proceedings of ECCM 5 Bordeaux, 7-10 April 1992 p.83-88 1992
[ACT529]R. Caen and S. Colin. Multidirectional pneumatic force sensor for grippers. Proceedings of Robotics Systems - Advanced Techniques and Applications, Vol. 10 p.551-558 1992 [DOI]
[ACT530]L. Baldas, R. Caen and J. George. A model of venturis behavior in vacuum generators. Proceedings of International Conference on Automation, Robotics and Computer Vision p.RO. 14. 11. 1 - RO. 1992
[ACT531]C. Espinosa, F. Collombet and J.-L. Lataillade. Endommagement de composites unidirectionnels par fissuration d'impact. Proceedings of 10ème Congrès Français de Mécanique, Paris, 2-6 septembre 1991 1991
[ACT532]S. Grihon, C. Lalanne and C. Bes. Identification du Chargement d’un Avion pour les Essais Statiques. Proceedings of Colloque ASTE, Ecole Polytechnique, Palaiseau 1991
[ACT533]C. Bes. Traitement du Signal en Dynamique des Structures. Proceedings of Conférence sur le traitement du signal en mécanique, CETIM, Senlis, 7-8 Mars 1990
[ACT534]Y. Gourinat. Application de l’Enseignement Assisté par Ordinateur en Mécanique des Structures. Proceedings of Congrès de l’EAO, Paris 1990
[ACT535]S.P. Sethi and C. Bes. Dynamic Stochastic Optimization Problems in the Framework of Forecast and Decision Horizons. Proceedings of Optimization Days 86, Montréal, Canada, April 30-May 2 1986
[ACT536]J.-B. Lasserre, C. Bes and F. Roubellat. Horizons de Planifications en Gestion de Stocks : Quelques Résultats Nouveaux. Proceedings of Colloque Systèmes de Production, Approche Scientifique, Economique, Stratégique, Paris, 23-26 Avril 1985
[ACT537]C. Bes and S.P. Sethi. Decision and Forecast Horizons for Discounted Stochastic Optimization Problems. Proceedings of CORS/SCRO 85 Conference, Halifax, Canada, May 21-23, 1985. Seventh European Congress on Operations Research, Bologna, Italy, June 16-19, 1985. 12th IFIP Conference on System Modelling and Optimization 1985
[ACT538]J.B. Lasserre, C. Bes and F. Roubellat. A Planning Horizon Result and a Protective Forward Method for the Bounded Inventory Problem with Discounted Cost. Proceedings of IFORS 84, Washington (USA), August 1984. IEEE Conference on Decision and Control, Las Vegas (USA), 13-15 December 1984
[ACT539]J.B. Lasserre, C. Bes and F. Roubellat. Stochastic Discrete Dynamic Lot Size Problem : An Open Loop Solution. Proceedings of Symposium On Production Management, Bruxelles (Belgium), 7-9 March 1983
[ACT540]C. Bes, J. Erschler, G. Fontan and F. Roubellat. Planification et Ordonnancement de la Production : Hiérarchisation et Flexibilité. Proceedings of SIBSO Production Automatisée, Toulouse, 22-23 Février 1983

Communication sans actes dans un congrès international ou national

[COM1]S. Guinard, M. Hamadi, R. Bouclier and J.-C. Passieux. A Non-Intrusive Coupling prototype for ABAQUS Implementation, demonstration & prospects. SIMULIA Regional User Meetings, DS Campus Vélizy, Fr. 2017
[COM2]G. Nguyen, N. Murdoch, A. Calandry, O. Cherrier and Y. Gourinat. Studying the influence of target and projectile properties on low-velocity collisions. European Planetary Science Congress 2017 (EPSC2017) 2017
[COM3]H.L. Dorothy , P. Longère and A. Dragon. Coupled ASB- and microvoiding-assisted dynamic ductile failure. 23rd DYMAT Technical Meeting, Dynamic fracture of ductile materials, Trondheim (Norway), 12-14 September 2017 2017
[COM4]H.L. Dorothy and P. Longère. Modelling of Adiabatic Shear Band and Microvoid induced Material Degradation . COMPLAS 2017, XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelona (Spain), 5-7 September 2017 2017
[COM5]C. Espinosa, Z.Z. Dong and M. Charlotte. Simulating the mushroom effect during a stratospheric balloon launch. RTS Mécanique Déformable des Ballons et Structures Souples, CCT CNES, 8 juin 2017, Toulouse (FR) 2017
[COM6]H.L. Dorothy and P. Longère. Numerical modelling of structural degradation under adiabatic shear banding and micro-voiding. CFRAC2017, 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Nantes (France), 14-16 june 2017 2017
[COM7]E. Marenic, D. Brancherie and M. Bonnet. Application of asymptotic analysis to the two-scale modeling of small defects in mechanical structures. Workshop: Analysis of Robust Asymptotic Methods In numerical Simulation in mechanics (ARAMIS), Pau 12-14/6 2017
[COM8]J. Mas Colomer, N. Bartoli, T. Lefebvre, S. Dubreil, P. Schmollgruber, J.R.R. Martins and J. Morlier. Static and Dynamic Aeroelastic Scaling of the CRM Wing via Multidisciplinary Optimization. WCSMO12 12th World Congress of Structural and Multidisciplinary Optimisation 5 - 9 June 2017, Braunschweig, Germany 2017
[COM9]H.L. Dorothy , P. Longère, A. Hor and A. Dragon. Modeling of high strain rate failure unser ASB and microvoiding. IMPLAST 2016, 11th International Symposium on Plasticity and Impact Mechanics, New Delhi (India), 11-14 December 2016 2016
[COM10]J.-N. Périé, J.-E. Pierré and J.-C. Passieux. Mechanically regularized Finite Element Stereo DIC: framework and application for structural testings. iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA 2016
[COM11]J.-C. Passieux, J.-N. Périé and R. Bouclier. Space-time FE-DIC for vibration measurement. iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA 2016
[COM12]S. Wang, L. Baldas, S. Colin, N. Mazellier and A. Kourta. Dynamics of fluidic oscillators and their synchronization for active flow control. Journées du GDR 2502 Contrôle des Décollements, LMFA, École Centrale de Lyon, France 2016
[COM13]N. Murdoch, A. Calandry, C. Sunday, I. Avila-martinez, O. Cherrier, A. Cadu, E. Zenou and Y. Gourinat. Studying low-velocity impacts in reduced gravity : an asteroid landing experiment. Division for Planetary Sciences / European Planetary Science Congress (DPS 48 / EPSC 11) Pasadena 2016
[COM14]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage de composites à matrice céramique oxyde/oxyde. JA 2016 SF2M 2016
[COM15]G. Pennisi, B. Mann, N. Naclerio, C. Stephan and G. Michon. Magnetic-Strung NES with Energy Harvesting: Theoretical and Experimental Study of a New Concept of Nonlinear Vibrations Absorber. ASME IDETC 2016 - Charlotte, USA 2016
[COM16]G. Manar, P. Longère, E. Roux, A. Hor and M. Salem. Effect of strain rate on the behavior and failure of 2024 and 7075 aluminum alloys. DSTC 2016, 3rd International Conference on Defence and Security Technology, Kuala Lumpur (Malaysia), 15-17 August 2016 2016
[COM17]M. Duval, S. Guinard, J.-C. Passieux and M. Salaün. Non-intrusive domain decomposition algorithm for solving nonlinear problems. ECCOMAS 2016 - European Congress on Computational Methods in Applied Sciences and Engineering - Ile de Crète (Grèce), Juin 2016
[COM18]R. Bouclier, J.-C. Passieux and M. Salaün. Local enrichment of NURBS patches using a non-intrusive coupling strategy. ECCOMAS 2016 - European Congress on Computational Methods in Applied Sciences and Engineering - Ile de Crète (Grèce), Juin 2016
[COM19]G. Pennisi, B. Mann, C. Stephan and G. Michon. Magnetic-Strung Nonlinear Energy Sink with Energy Harvesting. ECCOMAS 2016 - Crète - Grèce 2016
[COM20]C. Bessaguet, E. Dantras, C. Lacabanne, G. Michon and M. Chevalier. PAEK / piezoelectric particles nanocomposites for interactive structures. International Carbon Composites Conference - Arcachon, France 2016
[COM21]H.L. Dorothy , P. Longère, A. Hor and A. Dragon. Description of ASB-dynamic localisation as a degradation mechanism. MTDM2016 - The 10th International Conference on the Mechanics of Time Dependent Materials, Paris (France), 17-20 May 2016 2016
[COM22]F. Chatti, C. Bouvet, D. Poquillon, G. Michon and L. Meizeix. Numerical Modeling of porous materials made with entangled fibers network. Euromech 569 - Chatenay-Malabry - France 2016
[COM23]P. Longère and H.L. Dorothy . Strain localisation described as a damage-like mechanism: (1-D) vs. D type modeling. MécaDymat - Comportement et rupture des matériaux sous sollicitations dynamiques, Strasbourg (France), 30-31 Mars 2016 2016
[COM24]F. Tostain, C. Espinosa and S. Rivallant. Modélisation des ruptures et fragmentations dynamiques de stratifiés composites en écrasement. MécaDymat "Comportement et rupture des matériaux sous sollicitations dynamiques", Strasbourg (France), 30-31 Mars 2016 2016
[COM25]V. Achard, A. Daidié, M. Paredes and C. Chirol. Advances in Materials and Processing Technologies. Advances in Materials and Processing Technologies, 2015, Madrid 2015
[COM26]M. Duval, A. Lozinski, J.-C. Passieux and M. Salaün. Non-intrusive coupling: multiscale computation and finite element mesh adaptation. X-DMS 2015 - eXtended Discretization MethodS - Ferrara (Italie), Septembre 2015
[COM27]C. Bessaguet, E. Dantras, D. Carponcin and G. Michon. Piezoelectric and mechanical properties of a high performance thermoplastic composite. JIP-JEPO, San Sebastian, Spain 2015
[COM28]R. Bouclier, J.-C. Passieux, M. Salaün and P. Laborde. On the application of a non-intrusive coupling strategy for the local enrichment of NURBS patches: geometrical details. X-DMS 2015 - eXtended Discretization MethodS - Ferrara (Italie), Septembre 2015
[COM29]E. Gourc, L. Sanches, G. Michon and V. Steffen Jr.. The Effects of Fuselage Stiffness Asymmetry in the Post-critical Dynamic Behavior of Helicopters. ASME-IDETC, Boston, MA, USA 2015
[COM30]G. Pennisi, G. Michon and C. Stéphan. Analytical and experimental study of a Vibro-Imapact Nonlinear Energy Sink. ASME-IDETC, Boston, MA, USA 2015
[COM31]J. Loukota, J.-C. Passieux, A. Lucchetti and G. Michon. A Coupled Deterministic-Stochastic Approach for the Effects of Non Structural Components in Cabin Vibrations of Large Aircraft. ASME-IDETC, Boston, MA, USA 2015
[COM32]S. Dols and M. Paredes. EVALUATION DE LA QUALITE DES ASSEMBLAGES VIA LE MONITORING DU SERRAGE. Les assemblages mécaniques: évolutions récentes et perspectives, Colloque SUPMECA 2015
[COM33]R. Bouclier, T. Elguedj and A. Combescure. A mixed locking-free NURBS-based solid-shell element for nonlinear solid mechanics. YIC GACM 2015 - 3rd ECCOMAS Young Investigators Conference - 6th GACM Colloquium, July 20–23, 2015, Aachen, Germany 2015
[COM34]E. Roux, P. Longère, O. Cherrier, T. Millot, D. Capdeville and J. Petit. Failure mechanisms in high strength steel under impact loading: from ASB to full fracture. ICDM2, Second International Conference on Damage Mechanics, Troyes (France), 8-11 july 2015 2015
[COM35]J. Wolf, P. Longère, J.-M. Cadou and J.-P. Crété. Numerical simulation of dynamic crack propagation in ductile materials. YIC GACM 2015, 3rd ECCOMAS Young Investigators Conference, Aachen (Germany), 20-23 july 2015 2015
[COM36]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. Measurement of regularised boundary conditions on a composite plate with Stereo Digital Image Correlation. ICCS 18, Intenational Conference on Composite Structure, 15-18 June (Lisbon, Portugal) 2015
[COM37]J. Wolf, P. Longère, J.-M. Cadou and J.-P. Crété. Numerical treatment of the damage/crack transition in a Gurson ductile material. CFRAC2015, 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Cachan (France), 3-5 june 2015 2015
[COM38]E. Paroissien, A. Da Veiga, S. Schwartz, G. Lelias and F. Lachaud. Modélisation Simplifiée de Liaisons Collées à l’Aide de la Technique par Macro-Element. Revue des Développements Réalisés depuis 2004. Forum TERATEC 2015
[COM39]E. Roux, P. Longère, O. Cherrier, T. Millot, D. Capdeville and J. Petit. Digital image analysis of ASB assisted dynamic fracture under impact loading. CFRAC2015, 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Cachan (France), 3-5 june 2015 2015
[COM40]J.-E. Pierré, J.-C. Passieux, J.-N. Périé, F. Bugarin and L. Robert. A Global Formulation to Stereo Digital Image Correlation with Mechanical Regularisation. PhotoMechanics 2015, Delft, NL 2015
[COM41]J.-C. Passieux and J.-N. Périé. High Performance Computing in Global DIC for the analysis of large datasets. Photomechanics 2015, Delft, NL 2015
[COM42]J.-C. Maré. Incremental modelling and simulation of EMAs with focus on mechanical power transmission. A-6 Symposium of Society of Automotive Engineers, May 10-14, Charleston, USA 2015
[COM43]S. Cafieri, F. Monies, M. Mongeau and C. Bes. Optimizing plunge milling aeronautical parts via MINLP. orsc - euro - 2015, Shanghai, May 10-12 2015
[COM44]S. Dols and M. Paredes. QUALITY EVALUATION OF BOLTED JOINTS USING TIGHTENING MONITORING AND SIMULATIONS. canadian Aeonotics & Space Institute, AERO 2015 Conference, 19-21 mai 2015 2015
[COM45]M. Paredes. Retour d’expérience sur l’enseignement de l’ecoconception à l’INSA de Toulouse. Colloque AIP-PRIMECA, Produits, Procédés, Systèmes, intelligents et durables , 28/03-01/04 2015, La Plagne 2015
[COM46]F. Tostain, C. Espinosa and S. Rivallant. Modèles d'écrasement localisé et d'endommagement diffus pour la simulation du crash de structures composites. Journées Thématiques DynRap 'Etudes de phénomènes en dynamique rapide par essais et simulations', DGA - Techniques aeronautiques, Toulouse, France, 25-26 mars 2015
[COM47]J.-C. Maré. Best practices in modelling and simulation applied to aerospace electromechanical actuators. 2015 European Aerospace Engineering Conference, Toulouse, March 11-12 2015
[COM48]J.-C. Maré. Commandes de vol et environnement. Journées Electrotechnique du club EEA - 24-25 Mars, Toulouse 2015
[COM49]P. Longère. Analyse de la fissuration dynamique de matériaux structuraux à vocation défense sous impact. Journées thématiques DynRap du 25 et 26 Mars 2015 : Etudes de phénomènes en dynamique rapide par essais et simulations, DGA-TA, Toulouse (France) 2015
[COM50]F. Soulas, C. Espinosa, F. Lachaud, Y. Duval, S. Guinard, B. Lepetit and I. Revel. Design of Mechanical Impact tests equivalent to lightning strikes. Journées Thématiques DynRap 'Etudes de phénomènes en dynamique rapide par essais et simulations', DGA- Techniques aeronautiques, Toulouse (France) 2015
[COM51]J.-C. Passieux and J.-N. Périé. Outils de calcul hautes performances pour la corrélation d’images volumiques éléments finis. Journées Matériaux Numériques - JMN 2015 2015
[COM52]C. Lafforgue, P. Magaud, Y. Gao, L. Baldas, S. Colin and P. Schmitz. Inertial migration of microorganisms flowing in microchannel. Les Rencontres Scientifiques d’IFP Energies nouvelles. Microfluidics : from laboratory tools to process development 2015
[COM53]J.-P. Crété, P. Longère and J.-M. Cadou. Propagation numérique d'une fissure via X-FEM dans un matériau de Gurson. Matériaux 2014, Montpellier (France), 24-28 novembre 2014 2014
[COM54]P. Longère, A. Dragon and T. Millot. Rupture sous taux de triaxialité négatif de l’alliage de titane Ti-6Al-4V : micro-mécanismes et effet de la vitesse de chargement. Matériaux 2014, Montpellier (France), 24-28 novembre 2014 Keynote lecture 2014
[COM55]S. Wang, L. Baldas, S. Colin, N. Mazellier and A. Kourta. Développement d’oscillateur fluidique pour le contrôle du décollement turbulent sur une rampe. Journées du GDR 2502 Contrôle des Décollements, Orsay, France 2014
[COM56]P. Schmollgruber, N. Bartoli and Y. Gourinat. Impact of Certification Constraints in a Multi-disciplinary Design Process. 4th EASN Association International Workshop on Flight Physics & Aircraft Design, Aachen Oct.2014 2014
[COM57]J.-C. Maré. Critical Issues and Lessons Learned in the Simulation of Flight Control Actuators . Society of American Engineers, Aircraft group, Aerospace Actuation, Control and Fluid Power Systems 2014
[COM58]E. Piollet, G. Michon and D. Poquillon. Experimental Study and Hysteresis Modeling of a Fibrous Material in Shear. ASME-IDETC, Buffalo, NY, USA 2014
[COM59]J.-P. Crété, P. Longère, J.-M. Cadou and J. Wolf. Crack propagation in a Gurson ductile material using X-FEM. WCCM XI, 11th World Congress on Computational Mechanics, Barcelona (Spain), 20-25 july, 2014 2014
[COM60]P. Longère and A. Dragon. Competition between ASB and void growth assisted shear failure mechanisms: unified modelling and applications. WCCM XI, 11th World Congress on Computational Mechanics, Barcelona (Spain), 20-25 july, 2014 2014
[COM61]P. Longère, O. Cherrier, E. Roux, T. Millot and D. Capdeville. Experimental investigation of structural material failure under high loading rate. ICEM 16, 16th International Conference on Experimental Mechanics, Cambridge (UK), 7-11 july, 2014 2014
[COM62]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. Measuring volumetric micro-scale displacements of a composite using a PGD-Based DVC. 16th International Conference on Experimental Mechanics, ICEM16 (Cambridge, UK) 2014
[COM63]J.-C. Passieux, F. Bugarin, J.-N. Périé, L. Robert and C. David. Multiscale FE digital image correlation and material parameter identification. World Congress on Computational Mechanics - WCCM XI, ECCM V, ECFD VI (Barcelona, Spain) 2014
[COM64]J.-C. Maré. Efficient Model-based Design of Actuation Systems and Components. Society of American Engineers, Aircraft group, Aerospace Actuation, Control and Fluid Power Systems 2014
[COM65]I. Viana, J.-J. Orteu and F. Bugarin. Inspection d'assemblages mécaniques aéronautiques par vision artificielle. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 22-23 mai 2014. 2014
[COM66]J. Chen, L. Baldas and S. Colin. Numerical analysis of thermal creep flow in tapered microchannels. 5th International Conference on Heat Transfer and Fluid Flow in Microscale (HTFFM-V), Marseille, France 2014
[COM67]J.-C. Passieux, A. Gravouil, J. Réthoré and M.-C. Baietto. A localized multigrid non-intrusive coupling approach for mixed mode crack propagation.. 42e Congrès National d'Analyse Numérique, CANUM 2014 (Carry-le-Rouet, Fr) 2014
[COM68]C. Espinosa. La simulation numérique des structures souples - Aide au dimensionnement de voiles de parachutes et de ballons. Journées Thématiques Aérolargage, DGA - Techniques Aéronautiques, Toulouse (France), 18-19 mars 2014
[COM69]P. Magaud, M. Abbas, C. Lafforgue-baldas, L. Baldas, S. Colin, E. Climent and P. Schmitz. Technical developments to characterize particle migration in micro-channel flows for sorting and separation applications. European Conference on Fluid-Particle Separation, Lyon, 2014. 2014
[COM70]M. Bouhlel, N. Bartoli, J. Morlier and A. Ostmane. SURROGATE MODELS FOR OPTIMIZATION IN HIGH DIMENSION USING A MIXED PLS/KRIGING METHOD. opti2014, 1st International Conference on Engineering and Applied Sciences Optimization, Kos, Greece 2014
[COM71]A. Frezzotti, L. Gibelli, H. Si Hadj Mohand , S. Colin and C. Barrot. DSMC simulations of MTV experiments on gas flows in micro-channels. Direct Simulation Monte Carlo 2013: Theory, Methods, and Applications (DSMC13), Santa Fe, New Mexico, USA 2013
[COM72]J.-C. Passieux, J. Réthoré, A. Gravouil and M.-C. Baietto. A local/global non-intrusive coupling approach for localized crack growth simulation. International Conference on Extended Finite Element Methods - XFEM 2013 (Lyon, Fr) keynote lecture 2013
[COM73]J.-P. Crété, P. Longère and J.-M. Cadou. Numerical simulation of crack propagation in ductile viscoplastic material using X-FEM. XFEM 2013, International Conference on Extended Finite Element Methods, Lyon (France), 11-13 sept. 2013 2013
[COM74]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. On the joint use of an opacifier and digital volume correlation to measure micro-scale volumetric displacement fields in a composite. ICTMS2013 - The 1st International Conference on Tomography of Materials and Structures, (Ghent, Belgium) 2013
[COM75]D. Garcia, J.-J. Orteu, L. Robert, B. Wattrisse and F. Bugarin. A Generic Synthetic Image Generator Package for the Evaluation of 3D Digital Image Correlation and Other Computer Vision-Based Measurement Techniques. Photomechanics 2013, Montpellier (France), 27-29 May 2013 [HAL]
[COM76]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Two-scale FEMU identification of mechanical parameters. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics 2013, Montpellier (France), 27-29 May 2013
[COM77]F. Lachaud, R. Piquet, E. Paroissien and J. Huet. Approche couplée essais-calculs pour l’analyse du comportement des assemblages boulonnés en composites stratifiés. NAFEMS 2013
[COM78]M. Charlotte. Transient Dynamics of a Finite Harmonic Atomic Chain Modelled from an Accurately Derived Enhanced Continuum.. 8th European Solid Mechanics Conference, July 9 - 13, 2012 Graz, AUSTRIA, (session Mechanics of Granular Media) 2012 [OATAO]
[COM79]V. Leontidis, L. Baldas and S. Colin. Numerical optimization of Knudsen micropumps with curved walls operating in the slip flow regime. 28th International Symposium on Rarefied Gas Dynamics (RGD28), Zaragoza, Spain 2012
[COM80]C. Espinosa, L. Michel, K. Bodjona, F. Lachaud and R. Piquet. Modélisation numérique de l’initiation et de la propagation des dommages lors du dépliage de cornières composites aéronautiques - Comparaison à des prévisions théoriques. NAFEMS 2012 2012
[COM81]J. Limido, M. Suraratchai, C. Mabru, C. Espinosa, M. Salaün, R. Chieragatti and M. Chaussumier. Surfaces usinées: cas d'aillages d'aluminium aéronautiques. Séminaire du GT 7 de la SF2M, 29 mars 2012, Paris (FR) 2012
[COM82]M. Paredes. Etude du comportement de ressorts coniques escamotables a pas variables. 13ème Colloque AIP-PRIMECA 2012
[COM83]C. Pozzolini, Y. Renard and M. Salaün. Vibro-impacts of plates and restitution coefficient. Euromech 514 - New trends in Contact Mechanics - Cargese (France), Mars 2012
[COM84]E. Piollet, G. Michon and D. Poquillon. Damping Properties of Random Fibre Networks Used as Sandwich Core Material. ESMC, Gratz, Autriche 2012
[COM85]V. Leontidis, L. Baldas and S. Colin. Modeling of a Knudsen pump consisting of curved channels. 3nd French-Chinese Conference on Microfluidics 2011
[COM86]Y. Li, S. Joseph, C. Barrot, L. Baldas, S. Colin, S. Orieux, D. Newport and J.J. Brandner. Analysis of gas flow in T-shaped micro-mixer by interferometry. 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, USA 2011
[COM87]A. Berranger, A. Daidié and M. Dijoud. Response surface based multi criteria optimization of turbine wheels fir-tree attachments. 16th Blade Mechanics Seminar, Winterthur, Switzerland, September 14 2011
[COM88]I. Maillet, L. Michel, M. Fressinet, G. Michon and Y. Gourinat. Mise en place d’un essai de détermination de seuil de propagation en fatigue du délaminage de mode I basé sur la résonance d’une éprouvette en matériau composite unidirectionnel. Journées Annuelles de la Société Française de Métallurgie et de Matériaux (SF2M), Nancy 2011
[COM89]C. Pozzolini, Y. Renard and M. Salaün. Vibro-impacts of beams and plates: Comparison between different numerical simulations. ENOC 2011 - 7th European Nonlinear Dynamics Conference - Rome (Italie), Juillet 2011
[COM90]F. Lachaud, C. Espinosa, L. Michel and M. Salaün. Impacts on fuselages: a trial in using numerical simulation to predict residual strength. Workshop on "Dynamic Failure of Composite and Sandwich Structures", 23-24 June 2011, ICA, Toulouse (FR) 2011
[COM91]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 10-11 mai 2011 2011
[COM92]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Ecole de Printemps en Traitement d'Image, Martel (France), 18-22 avril 2011 2011
[COM93]F. Bugarin, D. Henrion, J.-J. Orteu, T. Sentenac and J.-B. Lasserre. Application de l'optimisation globale par théorie des moments aux problèmes d'estimation issus de la vision artificielle. Journée GDR ISIS 2011
[COM94]P. Longère, A.-G. Geffroy, B. Leblé and A. Dragon. Multi-stage viscoplasticity/damage modelling and simulation for ductile metals. CFRAC2011, International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Barcelone (Espagne), 6/8 Juin 2011 2011
[COM95]A. Daidié. La maîtrise du transfert de charge dans les éléments de liaison aéronautiques : quelle définition de modèles et d'outils d'assistance de prédimensionnement en phase de conception ?. Colloque 3AF, Chatillon, France, 27 mai 2010
[COM96]C. Pozzolini, S. Cogan and M. Salaün. A modelling error localization process for large finite element models in structural dynamics. ECCM 2010 - 4th European Conference on Computational Mechanics - Paris (France), Mai 2010
[COM97]F. Samouda, S. Colin and C. Barrot. Gasmems network: example of collaboration and exchanges opportunities. Euroscience Open Forum (ESOF2010), Torino, Italy 2010
[COM98]C. Renault, S. Colin, P. Cognet, T. Tzédakis, S. Orieux, H. Chaumat, S. Geoffroy, C. André-barrès and R. Ciumag. A multi-channel microreactor dedicated to the electro-organic synthesis. 61st Annual Meeting of the International Society of Electrochemistry, Nice, France 2010
[COM99]M.P. Carreras, Y. Li, D. Newport, F. Samouda, S. Colin, C. Barrot and L. Baldas. Reinforcement and creation of collaboration networks to enhance joint research. Euroscience Open Forum (ESOF2010), Torino, Italy 2010
[COM100]S. Seguy. Solution de contrôle des vibrations régénératives. Journée Modes Non Linéaires, 27 novembre 2009, Toulouse, France 2009
[COM101]W. Ghozlani , L. Baldas, R. Caen, A. Kourta and H. Boisson. Etude numérique et expérimentale des actionneurs micro-fluidiques pour le contrôle actif des écoulements. Colloque de synthèse du GDR 2502 Contrôle des Décollements, Orléans, France 2009
[COM102]J. Lasry, J. Pommier, Y. Renard and M. Salaün. Stress intensity factor computations for bending plates with XFEM. XFEM 2009 - International Conference on eXtended Finite Element Methods - Aachen (Allemagne), Septembre 2009
[COM103]T. Gouache, Y. Gao, P. Coste and Y. Gourinat. Experimental Study of dual-reciprocating-drilling Mechanism using Design of Experiment Approach. 13th European Space Mechanisms and Tribology Symposium, Vienna 2009
[COM104]W. Ghozlani , L. Baldas, R. Caen, A. Kourta and H. Boisson. Numerical and experimental study of sub-millimetric fluidic actuators for boundary layer separation control. 2nd French-Chinese Conference on Microfluidics, Paris, France 2009
[COM105]W. Ghozlani, L. Baldas, R. Caen, A. Kourta and H. Boisson. Etude numérique et expérimentale des actionneurs micro-fluidiques pour le contrôle actif des écoulements. Colloque de synthèse du GDR 2502 Contrôle des Décollements, Orléans, France 2009
[COM106]J. Pitakarnnop, S. Colin, S. Geoffroy, L. Baldas, S. Orieux, S. Misdanitis and D. Valougeorgis. An investigation of gas mixture flows through rectangular microchannels . 2nd French-Chinese Conference on Microfluidics, Paris, France 2009
[COM107]J. Pitakarnnop, S. Varoutis, D. Valougeorgis, S. Geoffroy, L. Baldas and S. Colin. Micro-écoulements de gaz monoatomiques et de leurs mélanges. Journées du GDR Micro Nanofluidique, Bordeaux, France 2009
[COM108]F. Bugarin, N. Decultot, M. Devy, J. Harvent, J.-J. Orteu, L. Robert and V. Velay. Multi-camera computer vision for large volume inspection: (a) aeronautical parts inspection and (b) incremental forming. Large Volume Metrology Conference 2008 (LVMC'2008), Liverpool (UK), 4-5 November 2008 2008
[COM109]J. Lasry, Y. Renard and M. Salaün. Extended finite element methods for thin plates. WCCM8 - 8th World Congress on Computational Mechanics - Venise (Italie), Juillet 2008
[COM110]J. Limido, M. Suraratchai, C. Mabru, C. Espinosa, M. Salaün and R. Chieragatti. Effet des paramètres d'usinage sur la durée de vie en fatigue d'un alliage d'aliminium. Les journées techniques du CETIM: Fatigue et procédés de fabrication, 26 juin 2008, Senlis (FR) 2008
[COM111]J. Harvent, F. Bugarin, J.-J. Orteu and M. Devy. Inspection de pièces aéronautiques pour la détection de défauts de forme à partir d'un système multi-caméras. Congrès de l'École Doctorale Systèmes (EDSYS), Toulouse (France), 22 mai 2008 2008
[COM112]J. Limido, C. Espinosa, J.-L. Lacome, R. Chieragatti, M. Salaün and C. Mabru. Utilisation de la méthode SPH pour simuler l’interaction outil matière en coupe orthogonale. Journées "Simulation et rhéologie de la coupe", Réseau "Procédés" de l'ENSAM, 20-21 mars 2008, Talence (FR) 2008
[COM113]J. Lasry, J. Pommier, Y. Renard and M. Salaün. Extended finite element method for cracked plates. CFRAC 2007 - International Conference on Computational Fracture and failure of materials and structures - Nantes (France), Juin 2007
[COM114]A. Batikh, L. Baldas, R. Caen, S. Colin, A. Kourta and H. Boisson. Numerical and experimental study of mini synthetic jets actuators for flow control. 2nd International Francophone Congress for Advanced Mechanics (IFCAM 2007), Alep, Syria 2007
[COM115]C. Gallet, M. Salaün and E. Bouchet. An example of global structural optimisation with genetic algorithms in the aerospace field. COMPLAS 2005 - International Conference on Computational Plasticity - Barcelona (Espagne), Septembre 2005
[COM116]P. Laborde, J. Pommier, Y. Renard and M. Salaün. High order extended finite element method for cracked domains. COMPLAS 2005 - International Conference on Computational Plasticity - Barcelona (Espagne), Septembre 2005
[COM117]C. Gallet, M. Salaün and E. Bouchet. Global structural optimisation with genetic algorithms. EUCASS 2005 - 1st European Conference for Aero-Space Sciences - Moscou (Russie), Juillet 2005
[COM118]P. Laborde, J. Pommier, Y. Renard and M. Salaün. Improvement of the accuracy in XFEM methods. MESHLESS 2005 - ECCOMAS Thematic Conference on Meshless Methods - Lisbonne (Portugal), Juillet 2005
[COM119]Y. Michel, C. Durin, C. Espinosa and J.-M. Chevalier. Aérogels : état de l'art et applications spatiales. 6ième CCT CNES Matériaux émergents et nanaotechnologies pour applications spatiales 2004
[COM120]S. Tardu, S. Colin, H. Camon and A.-M. Gué. Effet de double couche électrique sur la stabilité des écoulements dans les microcanaux. Perspectives pour l'amélioration des mécanismes de transfert. Journée d'Etude de la SFT "Transferts de chaleur et Changement de phase dans les mini-canaux et les milieux confinés", Paris, France 2003
[COM121]Y. Gourinat. Projet Pédagogique de Lanceur Mixte. Colloque CNES Lanceurs Combinés, Les-Vaux-de-Cernay 2002
[COM122]I. Brinck and Y. Gourinat. France-Sweden integrated industrial research programs. 6th French-Swedish Seminar for Engineering Training, France-Sweden Assocation for Research, Linköping 2002
[COM123]Y. Gourinat and F. Benyahia. Application de la Dynamique Explicite à la Sécurité Astronaute et aux Problèmes d’Absorption d’Énergie. Journée Dynamique Rapide, Computational Structural Mechanics/Association Française de Mécanique, Toulouse 2000
[COM124]A.-M. Gué and S. Colin. Quelques approches microsystèmes : modélisation multi-échelle et micro-fluidique. 2ème Meeting de Biomicroéletromécanique et Nanotechnologie, Toulouse, France 2000
[COM125]D. Estève, J. Tasselli, M. Dilhan, E. Scheid, M. Anduze, S. Colin, I. Dufour and J.-P. Grandchamp. Conception et mise au point de systèmes "microfluidiques" sur silicium. Semaine Nationale des Nano et Microtechnologies, Paris, France 1999
[COM126]M. Anduze, T. Bourouina, R. Caen, S. Charbonnier, S. Colin, W. Daniau, M. Dilhan, I. Dufour, D. Estève, O. Français, J.-P. Grandchamp, A. Grosgeorges, A.-M. Gué, T. Hervé, G. Julie, N. Noury, J.P. Siche, J. Tasselli and G. Vialaret. MICROMED - Microsystèmes médicaux : application au contrôle ambulatoire de la pression artérielle. Journée Microsystèmes des Laboratoires du CNRS, Paris 1998
[COM127]M. Anduze, F. Blavoux, P. Bossuet, M.-C. Charrier-mojtabi, S. Colin, A. Giovannini, M. Karimi-fard, D. Rousseau and D. Varieras. Utilisation du logiciel Fluent en tant qu'outil d'aide à l'enseignement et la recherche pour la visualisation et la compréhension d'écoulements variés. 1ère Rencontre des Utilisateurs de FLUENT, Paris, France 1997
[COM128]F. Benyahia and Y. Gourinat. Calcul du Flambage Dynamique de panneaux minces. Symposium National Dyna de dynamique explicite, Illkirch 1995
[COM129]R. Caen and S. Colin. La microfluidique aujourd'hui et demain. Premier Forum National Microtechnologies et Microsystèmes, Paris, France 1995
[COM130]Y. Gourinat. Aerospatiale’s Courseware for Structure Analysis. International Conference on Computer Aided Learning and Instruction in Science and Engineering, Lausanne 1991
[COM131]Y. Gourinat. L’Enseignement Assisté par Ordinateur en Mécanique des Structures. Colloque International Interface Formation Hautes Écoles et Monde Professionnel, Lausanne 1990
[COM132]S. Colin and D. Bellet. Hémolyse mécanique dans la prothèse cardiaque CORA : analyse et propositions d'améliorations. 14ème Congrès de la Société de Biomécanique, Marseille, France 1989

Communication par poster dans un congrès international ou national

[AFF1]M. Ruiz De Sotto, P. Longère, V. Doquet and J. Papasidero. Caractérisation et modélisation de l'alliage Ti-6Al-4V sous chargement dynamique complexe. PRC2 MécaComp, SafranTech, Magny-les-Hameaux (France), 5-6 Oct. 2017 2017
[AFF2]S. Vandevelde, A. Daidié and M. Sartor. Caractérisation et modélisation des matériaux d’interfaces thermiques aux assemblages boulonnés dans le domaine aérospatial. SF2M-2017 2017
[AFF3]V. Rafik, C. Chirol, A. Daidié and B. Combes. Understanding and optimization of the behavior of a bolted assembly integrating new constraints. Airbus PhD Day, Filton, Grande-Bretragne 2017
[AFF4]J. Fu, J.-C. Maré and Y. Fu. Virtual Prototyping of Position Synchronized Electro-mechanical Actuators Driving Independent Loads for More Electric Aircraft Flight Control Actuation System Application. 4th More Electric Aircraft (MEA) 2017, Bordeaux, France; 1-2 February 2017
[AFF5]M. Vellas, Y. Gourinat, C. Fualdes and Y. Rolland. Ageing of Monolithic Composites structure By Analogy With Bio-Science Criteria. Civil Aviation and Surgery : A Human Enterprise Perspective, Texas Medical Center, Houston 2016
[AFF6]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Endommagements des assemblages boulonnés en composite à matrice céramique oxyde/oxyde. Journée des thèses 2016 IRT Saint-Exupéry 2016
[AFF7]M.A. Ben Lassoued, A. Ross and G. Michon. Vibration energy localisation in inhomogeneous beam structures. ICTAM 2016 - Montréal, Canada 2016
[AFF8]L. Amar, E. Laurendeau, G. Michon and S. Prothin. Passive Control of Flutter applied on a 3DOF Airfoil. ICTAM 2016 - Montréal, Canada 2016
[AFF9]J. Wolf, P. Longère, J.-M. Cadou and J.-P. Crété. Numerical modelling of the damage-to-crack transition in a Gurson-type material. ICTAM 2016, 24th International Congress of Theoretical and Applied Mechanics, Montréal (Canada), 21-26 august 2016 2016
[AFF10]N. Murdoch, I. Avila-martinez, C. Sunday, O. Cherrier, T. Janin, A. Cadu, Y. Gourinat and D. Mimoun. An experimental study of low velocity impacts into granular material in reduced gravity. European Geosciences Union General Assembly 2016, Vienna 2016
[AFF11]A. Chiplunkar, E. Rachelson, M. Colombo and J. Morlier. Identification of Physical Parameters Using Gaussian Process Change-Point Kernels. SIAM Conference on uncertainty propagation 2016
[AFF12]C. Gogu. Topology optimization with millions of design variables aided by reduced order modeling. 3rd Workshop on Reduced Basis, POD and PGD Model Reduction Techniques, Cachan, 4-6th November 2015
[AFF13]J.-P. Crété, P. Longère and J.-M. Cadou. Modélisation numérique de la réponse d'une structure navale à une explosion sous-marine. Forum Innovation DGA, Ecole Polytechnique, Palaiseau (France), 26 Nov. 2015 2015
[AFF14]I. Viana, J.-J. Orteu, F. Bugarin and N. Cornille. Application of bipartite graph to the matching of geometric primitives in vision based inspection. VISUM Summer School (VISion Understanding and Machine intelligence), Porto (Portugal), 2-9 July 2015 2015
[AFF15]R. Thanwerdas, E. Rodriguez, A. Daidié and P. Guy. Mesures de glissement par stéréo-vision dans des assemblages vissés soumis à une sollicitation transversale . Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France 2015
[AFF16]E. Roux, P. Longère, O. Cherrier, T. Millot and D. Capdeville. Analysis of failure mechanisms in structural materials under high loading rate. International Colloquium Multi-physics modeling of solids 2014 (MPMS 2014), Paris-Palaiseau, France 2014
[AFF17]L. Barrière, J.-C. Passieux, S. Marguet, B. Castanié and P. Cresta. Adaptive Model Reduction for Local Post-Buckling Analysis. 2nd International Workshop on Reduced Basis, POD and PGD model (Blois, Fr) 2013
[AFF18]C. David, J.-C. Passieux, J.-N. Périé and L. Robert. Identification des paramètres constitutifs de modèles orthotropes à partir de mesures CIN multiéchelles. JNC 18 - 18èmes Journées Nationales sur les Composites, Nantes, France 2013
[AFF19]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force gauging by digital image correlation. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics (Montpellier, Fr) 2013
[AFF20]L.A. Gomes Perini, J.-C. Passieux and J.-N. Périé. A fast method for volumetric full-field displacement measurement: PGD-DVC. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics (Montpellier, Fr) 2013
[AFF21]J.-S. Brest, V. Keryvin, P. Longère and Y. Yokoyama. Plasticité des verres métalliques à base Zr. Colloque national MECAMAT, Effets d'environnement sur le comportement mécanique et la dégradation des matériaux, Session posters, Aussois, 21-25 Janvier 2013 2013
[AFF22]J.-P. Crété, P. Longère and J.-M. Cadou. Propagation d’une fissure 2D dans un matériau viscoplastique endommageable avec X-FEM. Colloque national MECAMAT, Effets d'environnement sur le comportement mécanique et la dégradation des matériaux, Session posters, Aussois, 21-25 Janvier 2013 2013
[AFF23]J.-P. Crété, C. Moussa, O. Bartier and G. Mauvoisin. Influence des contraintes résiduelles sur les grandeurs mesurables en indentation instrumentée. Conférence Matériaux 2010, Session Posters, Nantes, 18/22 Octobre 2010 2010
[AFF24]A. Shahdin, L. Mezeix, J. Morlier, Y. Gourinat and C. Bouvet. Diagnosis of the Fabrication Process of Sandwich Structures with Fiber Network Core with the help of Vibration Testing. 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London 2009
[AFF25]J. Limido, M. Suraratchai, C. Mabru, C. Espinosa, M. Salaün and R. Chieragatti. Effet des paramètres d'usinage sur la drée de vie en fatigue des pièces aéronautiques en alliages d'aluminium de la série 7000. MECAMAT 2007 Fatigue des matériaux et des srtuctures, 22-26 janvier, Aussois (FR) 2007 [OATAO]
[AFF26]J. Limido and C. Espinosa. Modélisation numérique de la coupe orthogonale en UGV . Colloque National DYMAT MECAMAT 2005 [OATAO]
[AFF27]F. Benyahia and Y. Gourinat. Numerical and Experimental Study of Safety Nets for Human and Equipment Security. 3rd European Dyna Conference on Explicit Dynamics, Paris 2001
[AFF28]T. Fenal, Y. Gourinat, C. Rosso and M. Labarrère. Confocal Microscopy of Hubble Specimen Impacted by Space Debris. 8th International Symposium on Materials in Space Environment, Arcachon 2000
[AFF29]Y. Gourinat. Sea-landing modelling of ARD spacecraft and launcher elements. 1st European Conference on Launcher Technology (ECLT), ESA/CNES/Arianespace, Toulouse 1999
[AFF30]S. Balasoiu and Y. Gourinat. Équations analytiques explicites du mouvement d’une minifusée. Congrès Français de Mécanique, Toulouse 1999
[AFF31]Y. Gourinat and A.S. Pramono. Stress-Wave Propagation in the Infinite Plate and Stress Distribution on the Spur Gears Transmission by Dynamic Photoelasticity. ECSSMMT, ESA/CNES/DLR, Braunschweig 1998 [OATAO]
[AFF32]Y. Gourinat. L’Espace à l’ENSICA : formation, recherche et développements. Colloque Européen de l’Institut des Sciences Spatiales et Applications de Toulouse 1998

Ouvrage scientifique

[OS1]J.-C. Maré. Aerospace Actuators Volume 1, Needs, reliability and hydraulic power solutions. Ed. ISTE / WILEY 217p. 2016 ISBN:978-1-84821-941-0
[OS2]D. Baumgärtner, J. Wolf, R. Rossi, R. Wüchner and P. Dadvand. Contribution to the Fluid-Structure Interaction Analysis of Ultra-Lightweight Structures using an Embedded Approach. Ed. Monograph CIMNE No-152 386p. 2015 ISBN:978-84-943307-6-6
[OS3]S.G. Kandlikar, S. Garimella, D. Li, S. Colin and M.R. King. Heat transfer and fluid flow in minichannels and microchannels - Second Edition. Ed. Elsevier 2013 ISBN:9780080983462
[OS4]Y. Gourinat. Mécanique des Solides. Livre de cours, corrigés de Problèmes. Ed. ISAE 159p. 2011 ISBN:ISBN 9782840882572
[OS5]Y. Gourinat. Mécanique des Solides. Livre de cours, énoncés de Problèmes. Ed. ISAE 179p. 2011 ISBN:ISBN 9782840882565
[OS6]Y. Gourinat. Exercices et Problèmes de Mécanique des Solides et des Structures. Applications Aéronautiques et Spatiales. Ed. Dunod 298p. 2011 ISBN:978-2-10-056700-3
[OS7]A. Berlioz and P. Trompette. Solid Mechanics using the Finite Element Method. Ed. Ed. Wiley 316p. 2009 ISBN:978-1-84821-191-9
[OS8]A. Berlioz and P. Trompette. Calcul des Structures par éléments finis. Exemples commentés. Ed. Ed. Editeur Hermès Science 272p. 2008 ISBN:IS 978-2-7462-2061-4
[OS9]S.G. Kandlikar, S. Garimella, D. Li, S. Colin and M.R. King. Heat transfer and fluid flow in minichannels and microchannels. Ed. Elsevier 450p. 2006 ISBN:0-08-044527-6
[OS10]Y. Gourinat. Éléments de Dynamique Analytique. Cours SUPAERO. Ed. SUPAERO 45p. 2004 ISBN:ISBN 2840881284
[OS11]Y. Gourinat. Dynamique Linéaire des Structures Minces. Cours DEA/M2R. Ed. SUPAERO 80p. 2003 ISBN:ISBN 2840881098
[OS12]Y. Gourinat. Introduction à la Dynamique des Structures. Éléments de Mécanique des Solides pour l’Ingénieur. Ed. Cepadues 438p. 2001 ISBN:285428545X [OATAO]
[OS13]Y. Gourinat. Introduction à l’Élastostatique Linéaire. Course 1ère année ingénieur. Ed. ENSICA 52p. 1999
[OS14]Y. Gourinat. Éléments de Dynamique Rationnelle. Cours 1ère année ingénieur. Ed. ENSICA 142p. 1987
[OS15]J.-C. Maré. Les actionneurs aéronautiques. Besoins, fiabilité et solutions à puissance hydraulique. Ed. ISTE 229p. 16 ISBN:978-1-78405-136-5

Chapitre d'ouvrage scientifique

[OSC1]Y. Gourinat. Charges structurales en vol - Dimensionnement de panneaux fuselages. In book Techniques Aérospatiales » Éditions Techniques de l'Ingénieur, p.À paraître en 2017. Ed. Techniques de l'Ingénieur. 2017
[OSC2]Y. Gourinat. Charges Structurales en vol - Domaine de vol avion. In book Techniques Aérospatiales, p.TRP4032. Ed. Techniques de l'Ingénieur, mai 2015. 2015
[OSC3]G. Waycaster, C. Bes, V. Bilotkach, C. Gogu, R. Haftka and N.-H. Kim. The Effect of Stakeholder Interactions on Design Decisions. In book Engineering and Applied Sciences Optimization, Chap. 22, p.413-425. Ed. Nikos Lagaros and Manolis Papadrakakis. 2015 ISBN:978-3-319-18320-6
[OSC4]R. Denis , J.-C. Maré, G. Dauphin-tanguy and A. Debiane. Approche virtuelle pour la conception et le développement de systèmes mécatroniques - Mise en œuvre. In book Techniques de l'Ingénieur, série Ingénierie des systèmes et robotique, S-7801, p.S-7801. Ed. Techniques de l'Ingénieur. 2014
[OSC5]G. Dauphin-tanguy, J.-C. Maré, R. Denis and A. Debiane. Approche virtuelle pour la conception et le développement de systèmes mécatroniques - Méthodologie. In book Encyclopédie des techniques de l'ingénieur, série Ingénierie des systèmes et robotique, p.S-7800. Ed. Techniques de l'Ingénieur. 2014
[OSC6]T. Gouache, Y. Gao, Y. Gourinat and P. Coste. Wood Wasp Inspired Space and Earth Drill. In book Biomimetics, Learning from Nature, p.467-486. Ed. In-Tech / Mukherjee. 2010 ISBN:978-9-53-307025-4 [OATAO]
[OSC7]S. Colin. Introduction to microflows. In book Microfluidics, Chap. 1, p.1-23. Ed. Wiley-ISTE. 2010 ISBN:978-1-84821-097-4
[OSC8]L. Manin and G. Michon. Entrainements par Courroies Striées, Architecture et Dynamique Globale. In book Techniques de l’Ingénieur, p.BM-5690. Ed. . 2010
[OSC9]C. Barrot and J.-P. Delplanque. Liquid microflows. In book Microfluidics, p.303-348. Ed. Wiley - ISTE. 2010 ISBN:978-1-84821-097-4
[OSC10]Y. Gourinat and J.P. Chrétien. Les Formalismes de la Dynamique Rationnelle des Systèmes Mécaniques : de Newton à Kane. In book Fonctions et Composants Mécaniques, p.BM 5 226 1-19. Ed. Techniques de l'Ingénieur. 2009 ISBN:ISSN 1762-8768 [OATAO]
[OSC11]Y. Gourinat. Équations Générales des Coques. Modèle Dynamique Linéaire des Éléments Minces Gauches. In book Fonctions et Composants Mécaniques, p.BM 5 025 1-14. Ed. Techniques de l'Ingénieur. 2009 ISBN:ISSN 1762-8768 [OATAO]
[OSC12]S. Colin. Pressure-driven single-phase gas flows. In book Encyclopedia of Micro- and Nanofluidics, p.1714-1723. Ed. Springer. 2008 ISBN:978-0-387-32468-5
[OSC13]E. Paroissien, M. Sartor and J. Huet. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts: Analytical One-Dimensional Models of a Single-Lap Joint. In book Trends and Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering II, p.95-110. Ed. Springer. 2007 ISBN:978-1-4020-6760-0 [OATAO]
[OSC14]E. Chahine, P. Laborde, J. Pommier, Y. Renard and M. Salaün. Study of some optimal XFEM type methods. In book Advances in Meshfree Techniques, p.27-38. Ed. Springer. 2007 ISBN:978-1-4020-6094-6 [OATAO]
[OSC15]E. Chahine, P. Laborde, J. Pommier, Y. Renard and M. Salaün. Some improvements of XFEM for cracked domains. In book IUTAM Symposium on discretization methods for evolving discontinuities, p.171-184. Ed. Springer. 2007
[OSC16]C. Espinosa and M. Salaün. Pour un usage raisonné des logiciels de calcul et des bibliothèques scientifiques. In book Encyclopédie de l’informatique et des systèmes d’information, Chap. 8, p.836-848. Ed. Vuibert. 2006 ISBN:2-7117-4846-4 [OATAO]
[OSC17]S. Colin. Généralités sur les micro-écoulements. In book Microfluidique, Chap. 1, p.17-42. Ed. Lavoisier. 2004 ISBN:2-7462-0815-6
[OSC18]Y. Gourinat. Analytical Dynamic Equations. Synthetized Lagrange’ s Formalism. In book Topics in Mechanics of Embarked Systems, p.. Ed. Augusta Publishing. 2001 ISBN:973-8284-55-X [OATAO]
[OSC19]S.P. Sethi and C. Bes. Dynamic Stochastic Optimization Problems in the Framework of Forecast and Decision Horizons. In book Advances in Optimization and Control, n°302, Springer- Verlag, p.. Ed. . 1986
[OSC20]J.B. Lasserre, C. Bes and F. Roubellat. Some New Planning Horizon Results in Inventory Management. In book , p.. Ed. . 1986

Ouvrage de vulgarisation (ou chapitre)

[OV1]M. Budinger, F. Hospital, J. Liscouet, B. Multon, A. Reysset and J.-C. Maré. Chaînes de transmission de puissance mécatroniques - Modèles d'estimation. Ed. Techniques de l’Ingénieur 2013
[OV2]M. Budinger, J. Liscouët, F. Hospital and B. Multon. Chaînes de transmission de puissance mécatroniques - Mise en place des modèles d'estimation pour la conception préliminaire. Ed. Techniques de l’Ingénieur, Référence BM8025 2011
[OV3]Y. Gourinat. Essai sur les Équations Constitutives de la Dynamique des Structures. Ed. ISAE 83p. 2011 ISBN:978-2-84-088260-2
[OV4]Y. Gourinat. Éléments de Statique et Dynamique des Structures Minces. Ed. ISAE-SUPAERO 148p. 2011 ISBN:ISBN 978-2-84-088259-6
[OV5]B. Combes. Vibrations des Structures pour l’Ingénieur et le Technicien. Ed. Ellipses 264p. 2009 ISBN:978-2-72-985079-1
[OV6]A. Clairin and Y. Gourinat. Exercices de Statique des Solides. Ed. ISAE-SUPAERO 46p. 2008 ISBN:978-2-84-088255-8
[OV7]Y. Gourinat. Statique et Thermique des Poutres. Ed. SUPAERO 126p. 2005 ISBN:978-2-84-088131-5
[OV8]J.-C. Maré. Actionneurs hydrauliques Commande. Ed. Article S7531, série Mesure et Régulation, Encyclopédie des Techniques de l'Ingénieur 17p. 2002
[OV9]J.-C. Maré. Actionneurs hydrauliques – Conception. Ed. Article S7530, série Mesure et Régulation, Encyclopédie des Techniques de l'Ingénieur 18p. 2002
[OV10]M. Lorrain, G. Seine and Y. Gourinat. Exercices d’Élastostatique Linéaire. Ed. ENSICA 52p. 2000
[OV11]Y. Gourinat. Éléments de Techniques Spatiales. Ed. ENSICA 45p. 1996

Direction d'ouvrage collectif

[DO1]S. Colin. Microfluidics. , 448p. Ed. Wiley-ISTE. 2010 ISBN:978-1-84821-097-4
[DO2]S. Colin. Microfluidique. , 393p. Ed. Lavoisier. 2004 ISBN:2-7462-0815-6

Thèse de Doctorat ou HdR

[TH1]C. Gogu. Contribution à l’optimisation et la conception sous incertitudes de systèmes mécaniques. Habilitation à diriger des recherches, Université Toulouse III. 2016
[TH2]H. Si Hadj Mohand . Micro-vélocimétrie par marquage moléculaire adaptée aux écoulements gazeux confinés. Thèse de doctorat, Université de Toulouse. 2015
[TH3]J.-C. Passieux. Quelques outils numériques pour la simulation et la mesure en mécanique des structures. Habilitation à diriger des recherches, Université Toulouse 3. 2015 [HAL]
[TH4]M. Budinger. Conception préliminaire et dimensionnement des systèmes d'actionnement. Habilitation à diriger des recherches, Université de Toulouse. 2014 [HAL]
[TH5]S. Segonds. Analyse et optimisation de processus du Génie Mécanique. Habilitation à diriger des recherches, . 2014
[TH6]G. Michon. Étude des Systèmes Dynamiques Non-Linéaires : Instabilités et Contrôle Passif des Vibrations. Habilitation à diriger des recherches, Université Paul Sabatier. 2013
[TH7]F. Bugarin. Vision 3D multi-images : contribution à l'obtention de solutions globales à l'aide de l'optimisation polynomiale par théorie des moments. Thèse de doctorat, Institut National Polytechnique de Toulouse. 2012
[TH8]J. Morlier. Approche système pour la surveillance vibratoire et le dimensionnement de structures. Habilitation à diriger des recherches, Université Paul Sabatier. 2012
[TH9]L. Baldas. Mini et micro systèmes fluidiques. Habilitation à diriger des recherches, Institut National Polytechnique de Toulouse. 2011
[TH10]M. Paredes. Développement d'outils d'assistance à la conception optimale de liaisons mécaniques. Habilitation à diriger des recherches, Université Paul Sabatier, Toulouse. 2011
[TH11]Y. Gourinat. Endommagement dynamique structural et phénomènes dissipatifs. Habilitation à diriger des recherches, Université de Poitiers. 2008 [OATAO]
[TH12]E. Paroissien. Contribution aux Assemblages Hybrides (Boulonnés/Collés) – Application aux Jonctions Aéronautiques. Thèse de doctorat, Université de Toulouse 3 / Institut de Génie Mécanique (IGM). 2006
[TH13]S. Colin. Microfluidique : premiers jalons. Habilitation à diriger des recherches, Université Paul Sabatier, Toulouse. 2000
[TH14]S. Colin. Etude et modélisation en écoulements compressibles des systèmes potentiométriques de type buse-palette. Thèse de doctorat, Institut National Polytechnique de Toulouse. 1992
[TH15]C. Espinosa. Contribution à l'étude du comportement sous impact localisé basse vitesse de plaques stratifiées à base d'unidirectionnels composites à fibres longues . Thèse de doctorat, Université de Bordeaux I. 1991
[TH16]Y. Gourinat. Conception et Réalisation du Didacticiel de Calcul de Structures de l'Aerospatiale. Thèse de doctorat, SUPAERO. 1989

Autre publication

[AP1]Y. Gourinat. Conduction osseuse locale & modèle dynamique cranio-céphalique. 2ème forum plateforme EDIT - technologies innovantes en santé. Organisé par le CHU de Toulouse à Purpan. Communication à l’Atelier handicap auditif & acoustique 2017
[AP2]Y. Gourinat. Biodynamique Aérosanté. Un pont entre physique et sciences de la vie initié par l’École Doctorale Aéronautique-Astronautique. Workshop Aerospace Valley L’Aérospatial au service de la Santé, Toulouse Business School 2016
[AP3]Y. Gourinat, M. Vellas and Y. Rolland. Biodynamics – A new approach of flight. AeroAging Workshop, Université de Toulouse 2016
[AP4]Y. Gourinat. Biodynamique & Dynamique Bioinspirée - Des archives vivantes. Open Access Week, Albi 2016
[AP5]P. Fabiani and Y. Gourinat. R&D Espace à l’ISAE-SUPAERO & à l’Institut Clément Ader. Présentation invitée, Club Galaxie, Cité de l’Espace 2016
[AP6]C. Barrot, S. Colin, L. Baldas and M. Rojas-cárdenas. Molecular Tagging Velocimetry (MTV) and its application to gas microflows. Séminaire of Seminar of Institute for Micro Process Engineering (IMVT), Karlsruhe Institute of Technology, Karlsruhe, Germany 2016
[AP7]Y. Gourinat. Vol spatial au long cours. Un défi scientifique & humain. Conférence invitée, Workshop Design Transdisciplinaire Architecture Système, Université de Toulouse II Jean Jaurès 2016
[AP8]J.-C. Maré. Best practices virtual prototyping - application to electromechanical actuators. Salon International de l'Aéronautique et de l'Espace, Paris 15 Juin 2015
[AP9]Y. Gourinat. Long Range Spaceflight : Stakes & Perspectives. Invited Lecture, Supaero Space Pole 2015
[AP10]Y. Gourinat. The Aerospace Doctoral Cursus. Présentation invitée - 3rd MEXFITEC - MEXique – France Ingénieurs TEChnologie MEXFITEC 2015 2015
[AP11]Y. Gourinat. Une présentation matricielle des équations coques-fluides. Presentation, journées Hamecmopsys, Paris IRCAM 2015
[AP12]S. Colin, C. Barrot and L. Baldas. Numerical and experimental approaches for analyzing gas microflows. Seminar of Dipartimento di Scienze & Tecnologie Aerospaziali from Politecnico di Milano, Italy 2014
[AP13]S. Colin. Micro écoulements gazeux: besoins expérimentaux et apports de la technique de vélocimétrie par marquage moléculaire. Séminaire du Laboratoire Modélisation et Simulation Multi Echelle (MSME), Marne la Vallée, France 2014
[AP14]Y. Gourinat and L. Pasenau. Science & Art, Art & Science : A perspective on « 2001, a Space Odyssey ». Invited lectur, Euroavia Toulouse 2014
[AP15]S. Colin. Gaseous microflows - Problematics and experimental analysis. Séminaire du Laboratoire Ondes et Matières d'Aquitaine (LOMA), Talence, France 2013
[AP16]Y. Gourinat. Aerospace Engineering, a link between people. The Dream to fly together.. Présentation invitée, International Micro Air Vehicle Conference IMAV 2013 2013
[AP17]I. Viana, R. Parlouar, F. Bugarin, J.-J. Orteu and L. Brèthes. Inspection automatisée d'assemblages mécaniques : vers une approche couplée vision 2D/vision 3D. Rapport de recherche Mines Albi 2013 [HAL]
[AP18]Y. Gourinat. Major Stakes, Challenges & Programs in Space. Invited lecture for ZeroG-Adventure Seminar Euroavia Toulouse 2013
[AP19]Y. Gourinat. R&D in Dynamics of Structures & Living Systems. Guest Lecture, Civil Aviation University of China 2013
[AP20]F. Bugarin, A. Bartoli, D. Henrion, J.-B. Lasserre, J.-J. Orteu and T. Sentenac. Rank-Constrained Fundamental Matrix Estimation by Polynomial Global Optimization Versus the Eight-Point Algorithm. Rapport de recherche LAAS No 12489 2012 [HAL]
[AP21]Y. Gourinat and V. Budinger. Un Avion Branché et au Courant : vers l’Avion plus Électrique.. Invited Lecture / panel session, Journée Industrie Aéronautique Cheuvreux, Paris 2012
[AP22]Y. Gourinat. Dynamic Loads for Aircraft & Spacecraft. Invited lecture, BUAA Summer Camp Toulouse 2012
[AP23]Y. Gourinat. Formation continue à distance en dynamique des structures. Séminaire Usage du Numérique pour l'Enseignement (UNE) Institut Supérieur de l’Aéronautique & de l’Espace 2012
[AP24]T. Gouache, Y. Gao, Y. Gourinat, P. Coste and T. Frame. Dual Reciprocating Drilling in planetary regoliths : Evolution of a bio-inspired solution. ESA/ESTEC Mechanisms' Final Presentation Days, Noordwijk 2012
[AP25]S. Foucaud, Y. Gourinat and B. Fraysse. Modélisation de l’oreille interne. Dispersion dans un guide d’onde couplé. Présentation 1ères journées Approche Hamiltonienne pour l'analyse et la commande des systèmes multiphysiques à paramètres distribués (Hamecmopsys) Lyon 2011
[AP26]Y. Gourinat. R&D en dynamique à l ‘ISAE. Intégrale de l’énergie des systèmes commandés. Présentation 1ères journées Approche Hamiltonienne pour l'analyse et la commande des systèmes multiphysiques à paramètres distribués (Hamecmopsys) Lyon 2011
[AP27]Y. Gourinat and D. Bellet. Mécanique analytique. De Newton à Lagrange & Hamilton. Séminaire Liesse pour les Professeurs de Mathématiques Spéciales, ISAE-SUPAERO 2011
[AP28]Y. Gourinat. Du Diagnostic Structural à la Dynamique du Vivant. Séminaire Liesse pour les Professeurs de Mathématiques Spéciales, ISAE-SUPAERO 2011
[AP29]Y. Gourinat. Contrôle Actif et Passif sur Voilure Tournante. L'exemple du Flottement Gyroscopique. Dynamic Control Day, CCT Structures & AAAF, ISAE 2010
[AP30]P. Selva, S. Foucaud and Y. Gourinat. Modélisations Dynamiques de l'Oreille Interne (présentation invitée). 2nd Training Day in Aerospace Medicine, groupe régional Médecine Aéronautique et Spatiale Toulouse (MASTER), Toulouse 2010
[AP31]T. Gouache, Y. Gao, P. Coste and Y. Gourinat. Bio-inspired drill for Lunar and Martian regoliths. 1st Networking/Partnering Day, ESA Noordwijk 2010
[AP32]Y. Gourinat. Applications Médicales des Techniques Spatiales. Conférence Invitée, Cap Sciences Bordeaux 2008
[AP33]Y. Gourinat. Improvement of Cabin Vibroacoustic Comfort. Presentation, Workshop Luftfahrtstandort Hamburg / Aerospace Valley, Toulouse 2007
[AP34]Y. Gourinat. Applications Médicales des Techniques Aérospatiales.. Mélée Numérique E-santé, Castres UT3 2007
[AP35]S. Colin. Micro-écoulements gazeux : effets du confinement sur les phénomènes de transport et de transferts thermiques. Séminaire du Groupe de Travail Mécanique des Fluides du MIP, Toulouse, France 2007
[AP36]S. Colin. Slip modeling in gas microflows. Stokes Research Institute Seminar, Limerick, Ireland 2005
[AP37]S. Colin. Des microsystèmes et des fluides - Cent applications récentes et futures. Conference Assosciences Midi Pyrénées, Toulouse, France 2005
[AP38]Y. Gourinat and P. Jung. Verne, von Braun, Hergé : du rêve à la réalité. 3 conférences invitées AAAF, Toulouse juin 2005, Cannes & Astrorama de la Trinité sept.2007 2005
[AP39]P. Sintes and Y. Gourinat. Pourquoi aller dans l’espace ? . Conférence invitée Ambassade de France en Andorre & Alliance Française, Andorra 2005
[AP40]Y. Gourinat and V. Bellœil. Contrôle dynamique des structures. Conférence invitée AAAF, Marignane 2005
[AP41]S. Colin. Microfluidique : particularités et potentialités des écoulements gazeux dans les microsystèmes. Cycle de Conférences "Confluences" de l'IMFT, Toulouse, France 2005
[AP42]S. Colin. Microfluidique gazeuse : effets du confinement sur les phénomènes de transport et de transferts thermiques. Séminaire du Laboratoire TREFLE, Pessac, France 2005
[AP43]P. Perrin, C. Bachelard and Y. Gourinat. Tourisme, Espace & Bases Polaires. Conférence invitée AAAF, Toulouse Cité de l’Espace 2004
[AP44]R. Chieragatti, E. Paroissien and J. Huet. Faisabilité d’assemblages mixtes boulonnés-collés en aéronautique. Journées Techniques, CETIM, Saint-Etienne (F-42) 2004
[AP45]P. Perrin, C. Bachelard and Y. Gourinat. Tourisme & Espace. Conférence invitée pour le 10ème anniversaire du centre astronomique PEGAASE, Montredon-Labessonnié 2003
[AP46]Y. Gourinat. Gravitation, Pesanteur, Impesanteur : le poids des mots. 2 conférences invitées AAAF, Marignane Sept.2003, Bordeaux nov.2005 2003
[AP47]S. Colin. Ecoulements dans les micro-conduites : modélisation et expérimentation. Séminaire du Laboratoire de Modélisation en Mécanique (LMM), Paris, France 2003
[AP48]S. Colin. Microfluidique et expérimentation : mesure précise de micro-débits à des fins fondamentales ou finalisées. Séminaire du Laboratoire de Physique et Mécanique des Milieux Hétérogènes de l'ESPCI, Paris 2003
[AP49]Y. Gourinat, R. Ferrer and J. Muller. Multi-Body Approach to Simulate Active Control for Stability Augmentation of Dynamic Systems. Application to Whirl-Flutter.. Poster, Salon International des Technologies & Énergies du Futur (SITEF) Toulouse 2002
[AP50]Y. Gourinat. Formation à la Cité des Étoiles & Applications Humaines. Conférence invitée, Société d’Astronomie Populaire, Toulouse 2002
[AP51]Y. Gourinat. La Station Spatiale Internationale : un enjeu majeur. Conférence invitée AAAF Marseille, Jan.2002 ; Toulouse Salle du Sénéchal (avec JJ Favier) avr.2002 2002
[AP52]Y. Gourinat. Dynamic design of structures. Communication, France-Israël Aerospace Workshop, Conférence des Grandes Écoles / Association for Research with Industrial and Educational Links 2001
[AP53]Y. Gourinat. Le Laté28 ou l’histoire au service du futur ; le quadriplace d’aujourd’hui ; les équipages des vols spatiaux au long cours. 3 conférences invitées, journée outreach du 52ème IAC (IAF) Castres 2001
[AP54]Y. Gourinat. Recherche, Développement & Formation Espace à l’ENSICA. Communication Réseau Régional Recherche Technologique Espace & Applications, Toulouse 2001
[AP55]Y. Gourinat. Recherche Spatiale & Vols au Long Cours. Conférence invitée, Service Scientifique de l’Ambassade de France, UPM Barcelone 2001
[AP56]Y. Gourinat. Medical and human applications of Astronaut Training Techniques. Guest Lecture University of Surrey 2001
[AP57]Y. Gourinat. Formation Astronaute. Conférence, Colloque Francophone pour l’Ingénierie des Protocoles, Toulouse Cité de l’Espace 2000
[AP58]Y. Gourinat. Computation & crash test of scale specimen for double deck section. Poster, Salon International des Technologies & Énergies du Futur (SITEF) Toulouse 2000
[AP59]Y. Gourinat. Computation & test of scale specimens : Application to spacecraft splashdown & landing.. Poster, Salon International des Technologies & Énergies du Futur (SITEF) Toulouse 2000
[AP60]Y. Gourinat. Vols spatiaux de plus de deux ans & missions arctiques. 3 conférences Invitées AAAF, Marignane avril 2000, Bordeaux mai 2000, Toulouse juin 2000 2000
[AP61]Y. Gourinat. Space Education & Space Specialization Odyssée Program. Bringing Space into Education Symposium, International Astronautical Federation / International Space University, Strasbourg-Bischoffsheim 2000
[AP62]Y. Gourinat. La session Astronaute 1999. Conférence invitée AAAF, Toulouse Cité de l’Espace 2000
[AP63]Y. Gourinat. Concept MAW & vol de 2 ans. 2 conférences invitées AAAF, Toulouse Cité de l’Espace & Aix-en-Provence, juin & juillet 1999 1999
[AP64]L.-M. Jagger and Y. Gourinat. Ergonomic considerations about Minimal Artificial Weightiness. Communication, France-Sweden Aerospace Workshop, Conférence des Grandes Écoles / Comité des Présidents & Doyens d’Universités Suédoises, Toulouse 1998
[AP65]A.S. Pramono and Y. Gourinat. Dynamics in plate & gear transmission by Dynamic Photoelasticity. Communication, France-Sweden Aerospace Workshop, Conférence des Grandes Écoles / Comité des Présidents & Doyens d’Universités Suédoises, Toulouse 1998
[AP66]Y. Gourinat. S’il te plaît, dessine-moi un cosmonaute. Conférence invitée AAAF, Toulouse Salle du Sénéchal 1997
[AP67]Y. Gourinat. Un hydravion régional à vocation internationale. Conférence invitée AAAF, Toulouse 1997
[AP68]Y. Gourinat and B. Troclet. Non-linear Dynamics applied to Spacecraft Landing. Communication, Atelier Aérospatial France-Canada, Conférence des Grandes Écoles / Comité des Doyens d’Universités Canadiennes, Concordia University 1997
[AP69]Y. Gourinat and A. Vauvelle. Qualification aux dommages en aviation générale. Communication, Atelier Aérospatial France-Canada, Conférence des Grandes Écoles / Comité des Doyens d’Universités Canadiennes, Concordia University 1997
[AP70]Y. Gourinat and A.S. Pramono. Dynamique des mécanismes - Photoélastodynamique. Communication, Atelier Aérospatial France-Canada, Conférence des Grandes Écoles / Comité des Doyens d’Universités Canadiennes, Concordia University 1997
[AP71]L. Dairaine and Y. Gourinat. Internet pour communiquer, l’hydravion pour coopérer. Conférence invitée AAAF, Marignane 1997
[AP72]Y. Gourinat. La Formation des Cosmonautes. Conférence invitée AG AAAF, Toulouse 1996
[AP73]Y. Gourinat. Le vol Spatial. Pourquoi et Comment ?. Conférence invitée AAAF, Aix-en-Provence 1996
[AP74]Y. Gourinat. Dynamique et endommagement des matériaux. Communication, Atelier Aérospatial France-Canada, Conférence des Grandes Écoles / Comité des Doyens d’Universités Canadiennes, Toulouse 1994
[AP75]Y. Gourinat. Le logiciel expérimental STAR89. Journées de l’Association pour le Développement des Méthodes dans l’Enseignement Supérieur 1989 [HAL]
[AP76]Y. Gourinat. L’EAO, applications industrielles - Conférence invitée et démonstration. Journée Centre Pédagogique Régional du Rectorat de Limoges 1989
[AP77]Y. Gourinat. StarColor® : Aerospatiale’s auto-training software for Structural Aerospace Research, with special chapters on Fatigue, Shells, Finite Elements, Boundary Elements. 1988
[AP78]Y. Gourinat. Dynamics of Arsene / Ariane 4 Structure. Supaero/CNES R&D Report, Toulouse 1985
[AP79]Y. Gourinat. Équations Intégrales de Frontière en Torsion Élastique. Mémoire de Recherche DEA - Poitiers 1984

Brevet

[BR1]M. Sartor, P. Morgue and M. Paredes. Procédé de contrôle d'un assemblage et dispositif associé. Brevet No.1262503, 2012
[BR2]M. Sartor, P. Morgue and M. Paredes. Dispositif de mesure de déformation et implantation d'un tel dispositif dans un élément. Brevet No.1261173, 2012
[BR3]G. Ferraris and A. Berlioz. RotorInsa Brevet No.INPI n°00 3 044 448, R 2012->. Brevet No., 2012
[BR4]S. Bianco, R. Canivenc and M. Sartor. A method, system, and computer program product for calculating the residual stress equilibrium of two concentric cylinders coldworked by a loading-unloading expansion process. Brevet No.US7739059, 2010
[BR5]S. Colin, C. Barrot, N. Laurien, L. Baldas, D. Foret and F. Casanova. Measuring method and portable measure bench for liquid micro-flows, and application for characterising micro-pumps for medical use. Brevet No.WO2010084268, 2010
[BR6]L. Baldas, D. Bouteille, M. Cechin, P. Milhau and S. Orieux. Générateur de vide autorégulé. Brevet No.FR 2929663, 2009
[BR7]S. Colin, C. Barrot, N. Laurien, L. Baldas, O. Thuillard, D. Foret and F. Casanova. Procédé de mesure et banc de mesure portable de micro-débits de liquide, application à la caractérisation de micro-pompes à usage médical. Brevet No.FR2941527, 2009
[BR8]S. Orieux, L. Baldas, P. Milhau, B. Wittig, L. Joguet and D. Bouteille. Dispositif de commande d'un circuit consommateur de gaz comprimé et générateur de vide faisant application. Brevet No.FR2896833 - EP1979625, 2007
[BR9]R. Chieragatti, M. Suraratchai, C. Mabru, C. Espinosa and V. Vergnes. Method for characterizing the endurance limite of a part from ist surface profile. Brevet No., 2006
[BR10]G. Thomin, G. Laffeta, M. Anduze, R. Caen, S. Colin and J.-C. Maré. Pump with positive displacement. Brevet No.WO9931388, 1998
[BR11]S. Orieux, L. Baldas and J.-C. Maré. Procédé et dispositif intégré de détection de la présence d'une pièce à déplacer sous une ventouse de manipulation par le vide. Brevet No.FR2755119, 1998
[BR12]G. Thomin, G. Laffeta, M. Anduze, R. Caen, S. Colin and J.-C. Maré. Pompe à déplacement positif. Brevet No.FR2772436, 1997
[BR13]P. André, R. Bourquin, R. Caen and S. Colin. Dispositif de modulation d'énergie d'un distributeur de fluide et modulateurs d'énergie équipés d'un tel dispositif. Brevet No.FR2689598, 1992



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80