Production scientifique du Groupe MSC

1112 contributions trouvées correspondantes à votre recherche.

Article de revue internationale avec comité de lecture

[ACL1]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit, I. Revel and Y. Duval. A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels. International Journal of Impact Engineering. 111, 165-176. 2018 [DOI]
[ACL2]C. Vicard, O. De Almeida, A. Cantarel and G. Bernhart. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam. Polymer. 132, 88-97. 2017 [DOI]
[ACL3]J.P. Susainathan, F. Eyma, E. De Luycker, A. Cantarel and B. Castanié. Manufacturing and quasi-static bending behavior of wood-based sandwich structures. Composite Structures. 182, 487-504. 2017 [DOI]
[ACL4]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading. Composite Structures. 181, 145-157. 2017 [DOI]
[ACL5]J. Serra, J.-E. Pierré, J.-C. Passieux, J.-N. Périé, C. Bouvet, B. Castanié and C. Petiot. Validation and Modeling of Aeronautical Composite Structures Subjected to Combined Loadings: the VERTEX Project. Part 2: Load Envelopes for the Assessment of Panels with Large Notches. Composite Structures. 180, 550-567. 2017 [DOI]
[ACL6]J. Sweeney, P. Spencer , D. Vgenopoulos, M. Babenko, F. Boutenel, F. Caton-rose and P. Coates. Application of activated barrier hopping theory to viscoplastic modeling of glassy polymers. Mechanics of Time-Dependent Materials. , . 2017 [DOI]
[ACL7]B. Vales, S. Marguet, R. Créachcadec, L. Sohier, J.-F. Ferrero and P. Navarro. Experimental & numerical study of the Tensile/Compression-Shear Arcan test under dynamic loading. International Journal of Adhesion and Adhesives. 78, 135-147. 2017 [DOI]
[ACL8]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Spatial Evolution of the Thickness Variations over a CFRP Laminated Structure. Applied Composite Materials. 24(5)1201-1215. 2017 [DOI]
[ACL9]M. Barus, H. Welemane, V. Nassiet, M.-L. Pastor, A. Cantarel, F. Collombet, L. Crouzeix and Y.-H. Grunevald. NDT-based design of joint material for the detection of bonding defects by infrared thermography. NDT & E International. , . 2017
[ACL10]J. Serra, J.-E. Pierré, J.-C. Passieux, J.-N. Périé, C. Bouvet and B. Castanié. Validation and Modeling of Aeronautical Composite Structures Subjected to Combined Loadings: the VERTEX Project. Part 1: Experimental Setup, FE-DIC Instrumentation and Procedures. Composite Structures. 179, 224-244. 2017 [DOI]
[ACL11]E. Paroissien, F. Lachaud, S. Schwartz, A. Da Veiga and P. Barrière. Simplified stress analysis of hybrid (bolted/bonded) joints. International Journal of Adhesion and Adhesives. 77, 183-197. 2017 [DOI]
[ACL12]J. Huang, M.-L. Pastor, C. Garnier and X. Gong. Rapid evaluation of fatigue limit on thermographic data analysis. International Journal of Fatigue. 104, 293-301. 2017 [DOI]
[ACL13]A. Djabali , L. Toubal, R. Zitoune and S. Rechak. An experimental investigation of the mechanical behavior and damage of thick laminated carbon/epoxy composite. Composite Structures. accepted, . 2017 [DOI]
[ACL14]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Identification and modelling of the in-plane reinforcement orientation variations in a CFRP laminate produced by manual lay-up. Applied Composite Materials. , . 2017 [DOI]
[ACL15]I. Ksouri, O. De Almeida and N. Haddar. Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization. Journal of Polymer Research. 24(8). 2017 [DOI]
[ACL16]B. Mahmoud, M. Colungo Torrecilla, P. Navarro, S. Marguet, I. Tawk and J.-F. Ferrero. Semi-continuous strategy for the modelling of damage mechanisms in unidirectional composites under low velocity impacts. Composites Part B: Engineering. , . 2017 [DOI]
[ACL17]M. Fiorina, A. Seman, B. Castanié, K.M. Ali, C. Schwob and L. Mezeix. Spring-in prediction for carbon/epoxy aerospace composite structure . Composite Structures. 168, 739-745. 2017 [DOI]
[ACL18]L. Toubal, R. Zitoune, F. Collombet and N. Rocher Gleizes. Moisture Effects on the Material Properties of a Jute/Epoxy Laminate: Impulse Excitation Technique Contribution. Journal of Natural Fibers. , 1-14. 2017 [DOI]
[ACL19]F. Liang, M. Sauceau, G. Dusserre and P. Arlabosse. A uniaxial cyclic compression method for characterizing the rheological and textural behaviors of mechanically dewatered sewage sludge. Water Research. 113, 171-180. 2017 [DOI]
[ACL20]N. Dubary, G. Taconet, C. Bouvet and B. Vieille. Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications. Composite Structures. , . 2017 [DOI]
[ACL21]M.S.B. Rehan, J. Rousseau, S. Fontaine and X. Gong. Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/ epoxy laminates. Composite Structures. 161, 1-7. 2017 [DOI]
[ACL22]L. Mezeix, S. Dols, C. Bouvet, B. Castanié, J.-P. Giavarini and N. Hongkarnjanakul. Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures. Journal of Sandwich Structures and Materials. , . 2017 [DOI]
[ACL23]T. Lisle, M.-L. Pastor, C. Bouvet and P. Marguerès. Damage of woven composite under translaminar cracking tests using infrared thermography. Composite Structures. 161, 275–286. 2017 [DOI]
[ACL24]A. Nouisri, O. Allix and O. Dorival. Towards a non intrusive method for solving coupled direct retrograde problem in transient dynamics. Mechanics and Industry. 18(2)In press. 2017 [DOI]
[ACL25]C. Sola, B. Castanié, L. Michel, F. Lachaud, A. Delabie and E. Mermoz . Bearing fatigue of composite laminates: damage monitoring and fatigue life prediction.. Composites Part B: Engineering. 110, 487-496. 2017
[ACL26]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Assessments on the mechanical behaviour of a monolithic composite structure instrumented with a monitoring patch. Journal of Composite Materials. , . 2017 [DOI]
[ACL27]S. Daouk, F. Louf, C. Cluzel, O. Dorival, L. Champaney and S. Audebert. Study of the dynamic behavior of a bolted joint under heavy loadings. Journal of Sound and Vibration. , In Press. 2017 [DOI]
[ACL28]R. Zitoune, N. Cadorin, F. Collombet and M. Sima. Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: In situ measurement by optical fiber. Wear. 376–377, 1849-1858. 2017
[ACL29]P.-M. Nigay, R. Sani, T. Cutard and A. Nzihou. Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 708, 375-382. 2017
[ACL30]S. Boztepe, O. De Almeida, R. Gilblas, C. Gerlach, Y. Le Maoult and F. Schmidt. The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling. International Journal of Material Forming. , . 2017 [DOI]
[ACL31]P. Rahme, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Drilling of thick composite materials using a step gundrill. Composites Part - A: Applied Science and Manufacturing. 103, 304-313. 2017 [DOI]
[ACL32]M. Dos Santos, V. Velay, V. Vidal, G. Bernhart, G. Batalha and H. Matsumoto. Mechanical behavior of a Ti-6Al-4 V titanium alloy with microstructural evolution modeling under hot and superplastic conditions. Materialwissenschaft und Werkstofftechnik. 48(10)952-968. 2017 [DOI]
[ACL33]M.-Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. BEM computation of 3D Stokes flow including moving front. International Journal of Material Forming. 10(4)567-580. 2017 [DOI]
[ACL34]A. Hejjaji, R. Zitoune, L. Crouzeix, S. Le Roux and F. Collombet. Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior. Wear. 376-377, 1356-1364. 2017 [DOI]
[ACL35]R. D'elia, G. Dusserre, S. Del Confetto, N. Eberling-fux, C. Descamps and T. Cutard. Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system. Polymer Engineering and Science. , . 2017 [DOI]
[ACL36]M. Vellas, C. Fualdes, J. Morley, C. Dray, L. Rodriguez-manas, A. Meyer, L. Michel, Y. Rolland and Y. Gourinat. AeroAging – A new collaboration between life sciences experts & aerospace engineers. The Journal of Nutrition Health and Aging. Accepted July, . 2017
[ACL37]J. Saoudi, R. Zitoune, S. Gururaja, M. Salem and S. Mezleni. Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray Tomography analysis. Journal of Composite Materials. , In press. 2017
[ACL38]P.-M. Nigay, A. Nzihou and T. Cutard. The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties. Ceramics International. 43, 1747-1754. 2017 [DOI]
[ACL39]J. Poirier, E. Blond, E. De Bilbao, R. Michel, A. Coulon, J. Gillibert, M. Boussuge, Y. Zhang, D. Ryckelynk, G. Dusserre, T. Cutard and P. Leplay. New advances in the laboratory characterization of refractories: testing and modelling. Metallurgical Research and Technology. 114(6). 2017 [DOI]
[ACL40]S. Braiek, R. Zitoune, A. Ben Khalifa and M. Zidi. Experimental and numerical study of adhesively bonded ±55° filament wound tubular specimens under uniaxial tensile loading. Composite Structures. 172, 297-310. 2017
[ACL41]D. Kumar, K. Singh and R. Zitoune. Impact of the carbon nanotube reinforcement in glass/epoxy polymeric nanocomposite on the quality of fiber laser drilling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. accepted, . 2017 [DOI]
[ACL42]A. Wilhelm, S. Rivallant and J.-F. Ferrero. Study of the deformation of a sandwich shield subjected to bird impact: A behaviour analysis tool using vector decomposition . Journal of Sandwich Structures and Materials. online, . 2017 [DOI]
[ACL43]C. Rouzaud, F. Gatuingt, G. Hervé and O. Dorival. A new multi-frequency approach based on Padé approximants for the treatment of transient dynamics problems with the variational theory of complex rays. Journal of Sound and Vibration. , In press. 2016 [DOI]
[ACL44]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, L. Crouzeix, Y.-H. Grunevald and V. Nassiet. Bonded repair issues for composites: An investigation approach based on infrared thermography. NDT & E International. 85, 27-33. 2016 [DOI]
[ACL45]Y. Ge, X. Gong, A. Hurez and E. De Luycker. Test methods for measuring pure mode III delamination toughness of composite. Polymer Testing. 55, 261-268. 2016 [DOI]
[ACL46]G. Dusserre, O. Valentin, F. Nazaret and T. Cutard. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 °C. Journal of the European Ceramic Society. 36(10)2627–2639. 2016 [DOI]
[ACL47]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Composite Structures. 148, 127-143. 2016 [DOI]
[ACL48]P. Rahme, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Drilling analytical model of composite material with pilot hole. Mechanics and Industry. 17(5). 2016 [DOI]
[ACL49]J. Saoudi, R. Zitoune, S. Gururaja, S. Mezlini and P. Seitier . Critical thrust force predictions during drilling: analytical modeling and X-ray tomography quantification. Composite Structures. 153(1 )886-894. 2016 [DOI]
[ACL50]L. Bernard, G. Michon, R. El Fatmi and B. Castanié. Static and Dynamic Analysis of Bending-Torsion Coupling of CFRP Sandwich Beam. Composite Structures. 145(1)26-36. 2016 [DOI]
[ACL51]C. Sola, B. Castanié, L. Michel, F. Lachaud, A. Delabie and E. Mermoz. On the role of kinking in the bearing failure of composite laminates. Composite Structures. 141, 184-193. 2016 [DOI]
[ACL52]O. Dorival, P. Navarro, S. Marguet, C. Petiot, M. Bermudez, D. Mesnagé and J.-F. Ferrero. Experimental results of medium velocity impact tests for reinforced foam core braided composite structures. Journal of Sandwich Structures and Materials. , . 2016 [DOI]
[ACL53]D. Mauduit, G. Dusserre and T. Cutard. Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines. Materials and Design. 95, 414–421. 2016 [DOI]
[ACL54]F. Berthet, F. Lachaud, M.-L. Pastor and J. Crevel. Behaviour and damage of injected carbon-fibre-reinforced polyether ether ketone: From process to modelling. Journal of Composite Materials. , . 2016 [DOI]
[ACL55]R. D'Elia, G. Dusserre, S. Del Confetto, N. Eberling-fux, C. Descamps and T. Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling. European Polymer Journal. 76, 40-52. 2016 [DOI]
[ACL56]C. Rouzaud, F. Gatuingt, G. Hervé, N. Moussalam and O. Dorival. Influence of the aircraft crash induced local nonlinearities on the overall dynamic response of a RC structure through a parametric study. Nuclear Engineering and Design. 298, 168-182. 2016 [DOI]
[ACL57]R. Zitoune, K. Vijayan, F. Collombet and S. Le Roux. Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks. Composite Structures. 146(20)148-158. 2016 [DOI]
[ACL58]B. Vales, S. Marguet, R. Créac'hcadec, L. Sohier, J.-F. Ferrero and P. Navarro. Numerical study of the local behaviour of adhesive bonds under dynamic loading. Journal of Adhesion Science and Technology. 30(12)1319-1339. 2016 [DOI]
[ACL59]S. Sassi, P. Marguerès, P. Olivier and R. Begue. Determination of anisotropic geometrical parameters for the electrical characterization of carbon/epoxy composite during oven curing. Composites Part - A: Applied Science and Manufacturing. 80, 204-216. 2016 [DOI]
[ACL60]L. Riviere, A. Lonjon, E. Dantras, C. Lacabanne, P. Olivier and N. Rocher Gleizes. Silver fillers aspect ratio influence on electrical and thermal conductivity in PEEK/Ag nanocomposites. European Polymer Journal. 85, 115-125. 2016 [DOI]
[ACL61]R. Prakash, V. Krishnaraj , R. Zitoune and J. Sheikh-ahmad . High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic Emission. Materials. 9(10)1-16. 2016 [DOI]
[ACL62]D. Kumar, K.K. Singh and R. Zitoune. Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills. Advanced Manufacturing: Polymer & Composites Science. 2(1)47-56. 2016 [DOI]
[ACL63]B. Thibaut, L.-E. Denaud, R. Collet, R. Marchal, J. Beauchêne , F. Mothe, P.-J. Méausoone, P. Martin, P. Larricq and F. Eyma. Wood machining with a focus on French research in the last 50 years. Annals of Forest Science. 73, 163-184. 2016 [DOI]
[ACL64]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Finite Element analysis of CFRP laminates subjected to compression after edge impact. Composite Structures. , . 2016 [DOI]
[ACL65]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Experimental analysis of CFRP laminates subjected to compression after edge impact. Composite Structures. 126, 314-326. 2016
[ACL66]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissière and C. Minot. Numerical simulation of impact and compression after impact of asymmetrically tapered laminated CFRP. International Journal of Impact Engineering. 95, 154-164. 2016
[ACL67]L. Korah, P.-M. Nigay, T. Cutard, A. Nzihou and S. Thomas. The impact of the particule shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties. Construction and building materials. 125, 654-660. 2016 [DOI]
[ACL68]R. D'Elia, G. Bernhart, J. Hijlkema and T. Cutard. Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles. Acta Astronautica. 126, 168-177. 2016 [DOI]
[ACL69]J. Saoudi, R. Zitoune, S. Gururaja, S. Mezlini and A. Amaranath. Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: Thermo-mechanical analysis. International Journal of Machining and Machinability of Materials. 18(1/2)77-98. 2016
[ACL70]N. Lona-batista, P. Olivier, G. Bernhart, M. Cerqueira-rezende and E. Cocchieri-botelho. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates. Materials Research. 19(1)195-201. 2016 [DOI]
[ACL71]A.C. Akué Asseko , B. Cosson , &. Lafranche, F. Schmidt and Y. Le Maoult. Effect of the developed temperature field on the molecular interdiffusion at the interface in infrared welding of polycarbonate composites. Composites Part B: Engineering. 97(15)53-61. 2016 [DOI]
[ACL72]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissière and C. Minot. Experimental study of compression after impact of asymmetrically tapered composite laminate. Composite Structures. 149, 292-203. 2016 [DOI]
[ACL73]C. Rouzaud, F. Gatuingt, G. Hervé, O. Dorival and N. Moussalam. Application of the variational theory of complex rays to the determination of shock induced vibration of a RC-structure. International Journal of Safety and Security Engineering. 6(2)427-437. 2016 [DOI]
[ACL74]F. Lachaud, C. Espinosa, L. Michel, P. Rahme and R. Piquet. Modelling strategies for predicting the residual strength of impacted composite aircraft fuselages. Applied Composite Materials. 22(6)599-621. 2015 [DOI]
[ACL75]F. Pascal, P. Navarro, S. Marguet and J.-F. Ferrero. On the modelling of low to medium velocity impact onto woven composite materials with a 2D semi-continuous approach. Composite Structures. 134, 302-310. 2015 [DOI]
[ACL76]M. Torres, F. Collombet, B. Douchin, L. Crouzeix, Y.-H. Grunevald, J. Lubin and T. Camps. Monitoring of the curing process of composite structures by tunnelling junction sensors. Sensors and Actuators, A: Physical. 235, 256-264. 2015 [DOI]
[ACL77]C. Cluzel, P. Rouch, O. Dorival and S. Behar. Experimental identification and associated model of the dissipation in the electric cables of a satellite structure. Journal of Sound and Vibration. 357, 156-167. 2015 [DOI]
[ACL78]C. Rouzaud, F. Gatuingt, O. Dorival, G. Hervé and L. Kovalevsky. A new methodology for assessing the global dynamic response of large shell structures under impact loading. Engineering Computations. 32(8)2343-2382. 2015 [DOI]
[ACL79]V. Munoz, B. Vales, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Damage detection in CFRP by coupling acoustic emission and infrared thermography. Composites Part B: Engineering. 85, 68-75. 2015 [DOI]
[ACL80]B. Vales, V. Munoz, H. Welemane, M.-L. Pastor, B. Trajin, M. Perrin, A. Cantarel and M. Karama. Heat source estimation in anisotropic materials. Composite Structures. 136, 287-296. 2015 [DOI]
[ACL81]O. Dorival, P. Navarro, S. Marguet, C. Petiot, M. Bermudez, D. Mesnagé and J.-F. Ferrero. Experimental study of impact energy absorption by reinforced braided composite structures: dynamic crushing tests. Composites Part B: Engineering. 78, 244-255. 2015 [DOI]
[ACL82]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Numerical and experimental value added of Multi-Instrumented Technological Evaluator for the analysis of thick monolithic composite structures with singularity details. Composite Structures. 127, 41-50. 2015 [DOI]
[ACL83]I. Maillet, L. Michel, F. Souric and Y. Gourinat. Mode II fatigue delamination growth characterization of a carbon/epoxy laminate at high frequency under vibration loading. Engineering Fracture Mechanics. 149, 298-312. 2015 [DOI]
[ACL84]F. Lachaud, C. Espinosa, L. Michel, R. Piquet and P. Rahme. Modelling Strategies for Simulating Delamination and Matrix Cracking in Composite Laminates. Applied Composite Materials. 22(4)377-403. 2015 [DOI]
[ACL85]B. Ostré, C. Bouvet, C. Minot and J. Aboissière. Edge impact modeling on stiffened composite structures. Composite Structures. 126, 314-326. 2015
[ACL86]S. Abrate, J.-F. Ferrero and P. Navarro. Cohesive zone models and impact damage predictions for composite structures. Meccanica. , 1-34. 2015 [DOI]
[ACL87]A. Beddiar, R. Zitoune, F. Collombet, Y.-H. Grunevald, T. Abadlia and N. Bourahla. Compressive behaviour of concrete elements confined with GFRP-prefabricated bonded shells. European Journal of Environmental and Civil Engineering. 19(1)65-88. 2015 [DOI]
[ACL88]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates. Journal of Composite Materials. 49(10)1223-1240. 2015 [DOI]
[ACL89]G. Dusserre. Modelling the hysteretic wale-wise stretching behaviour of technical plain knits. European Journal of Mechanics, A/Solids. 51, 160-171. 2015 [DOI]
[ACL90]T. Lisle, C. Bouvet, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography. Composites Science and Technology. 112, 22-33. 2015 [DOI]
[ACL91]P. Rahme, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Delamination-free drilling of thick composite materials. Composites Part - A: Applied Science and Manufacturing. 72, 148-159. 2015
[ACL92]G. Lélias, E. Paroissien, F. Lachaud, J. Morlier, S. Schwartz and C. Gavoille. An extended semi-analytical formulation for fast and reliable mode I/II stress analysis of adhesively bonded joints. International Journal of Solids and Structures. 62, 18-38. 2015 [DOI]
[ACL93]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence of machining process and machining induced surface roughness on mechanical properties of continuous fiber composites. Experimental Mechanics. 55(3)519-528. 2015 [DOI]
[ACL94]S. Le Roux, F. Deschaux-Beaume, T. Cutard and P. Lours. Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials. Journal of the European Ceramic Society. 35(3)1063-1079. 2015 [DOI]
[ACL95]E. Kandare, A. Katibi, S. Yoo, R. Wang, J. Ma, P. Olivier, N. Gleizes and C. Wang. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions. Composites Part - A: Applied Science and Manufacturing. 69, 72-82. 2015 [DOI]
[ACL96]P. Navarro, J. Aubry, F. Pascal, S. Marguet, J.-F. Ferrero and O. Dorival. Effects of the stacking sequence, material nature and addition of an adhesive film on the delamination resistance of woven composite laminates in mode I and II. Advanced Composites Letters. 24(1)1-5. 2015
[ACL97]N. Cadorin and R. Zitoune. Wear signature on hole defects as a function of cutting tool material for drilling 3D interlock composite. Wear. 332-333, 742-751. 2015 [DOI]
[ACL98]X.-J. Gong, P. Cheng , S. Aivazzadeh and X. Xiao. Design and optimization of bonded patch repairs of laminated composite structures. Composite Structures. accepted, . 2015 [DOI]
[ACL99]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP. Composites Part - A: Applied Science and Manufacturing. 68, 110-120. 2015 [DOI]
[ACL100]L. Mezeix, D. Poquillon and C. Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part II: Analytical Model. Applied Composite Materials. , . 2015 [DOI]
[ACL101]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult and E. Lafranche. Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials. Infrared Physics and Technology. 72, 293–299. 2015 [DOI]
[ACL102]L. Mezeix, D. Poquillon and C. Bouvet. Entangled Cross-Linked Fibres for an Application as Core Material for Sandwich Structures - Part I: Experimental Investigation. Applied Composite Materials. , . 2015 [DOI]
[ACL103]A.-C. Akue Asseko, B. Cosson, M. Deleglise, F. Schmidt, Y. Le Maoult and E. Lafranche. Analytical and numerical modelling of light scattering in composite transmission laser welding process. International Journal of Material Forming. 8, 127-135. 2015 [DOI]
[ACL104]T. Lisle, C. Bouvet, M.-L. Pastor, T. Rouault and P. Marguerès. Damage of woven composite under tensile and shear stress using infrared thermography and micrographic cuts. Journal of Materials Science. 50(18)6154-6170. 2015 [DOI]
[ACL105]J. Vignes, F. Schmidt, G. Dusserre and J.-F. Dalmasso. Numerical simulation of extruded clay paste compression. International Journal of Material Forming. 8, 111-118. 2015 [DOI]
[ACL106]M. Saleem , R. Zitoune, I. El Sawi and H. Bougherara. Role of the Surface Quality on the Mechanical Behavior of CFRP bolted Composite joints. International Journal of Fatigue. 80, 246-256. 2015 [DOI]
[ACL107]A.-C. Akue Asseko, B. Cosson, F. Schmidt, Y. Le Maoult, R. Gilblas and E. Lafranche. Laser transmission welding of composites – Part B: Experimental validation of numerical model. Infrared Physics and Technology. 23, 304-311. 2015 [DOI]
[ACL108]L. Mezeix, A. Seman, N.M.N. Nasir, Y. Aminanda, A. Rivai, B. Castanié, P. Olivier and K.M. Ali. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures. 124, 196-205. 2015 [DOI]
[ACL109]S. Daouk, F. Louf, O. Dorival, L. Champaney and S. Audebert. Uncertainties in structural dynamics: overview and comparative analysis of methods. Mechanics and Industry. 16(4)Online. 2015 [DOI]
[ACL110]M. Mulle, A. Moussawi, G. Lubineau, S. Durand, D. Falandry and P. Olivier. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings. Composite Structures. 130(15)75-84. 2015 [DOI]
[ACL111]P.-J. Liotier, Q. Govignon, E. Swery, S. Drapier and S. Bickerton. Characterisation of woven flax fibres reinforcements: effect of the shear on the in-plane permeability. Journal of Composite Materials. 49(27)3415-3430. 2015
[ACL112]V. La Saponara, A. Farrugia, W. Lestari and A. Muliana. Analysis of ultrasonic waveforms from smart sandwich composite structures under creep bending at elevated temperature. Journal of intelligent material systems and structures. 26, 810-829. 2015
[ACL113]M. Fogel, P. Parlevliet, M. Geistbeck, P. Olivier and E. Dantras. Thermal, rheological and electrical analysis of MWCNTs/epoxy matrices. Composites Science and Technology. 110, 118-125. 2015 [DOI]
[ACL114]B. Ostré, C. Bouvet, F. Lachaud, C. Minot and J. Aboissière. Edge impact damage scenario on stiffened composite structure. Journal of Composite Materials. 49(13)1599-1612. 2015
[ACL115]P. Navarro, J. Aubry, F. Pascal, S. Marguet, J.-F. Ferrero and O. Dorival. Influence of the stacking sequence and crack velocity on fracture toughness of woven composite laminates in mode I. Engineering Fracture Mechanics. 131, 340-348. 2014 [DOI]
[ACL116]A. Abbadi, L. Michel and B. Castanié. Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing. Advanced Composites Letters. 23(6)142-148. 2014
[ACL117]H.A. Israr, N. Hongkarnjanakul, S. Rivallant and C. Bouvet. Post-impact investigation of CFRP laminated plate. Jurnal Teknologi (Sciences and Engineering). 71(2)71-78. 2014 [DOI]
[ACL118]J.-C. Passieux, P. Navarro, J.-N. Périé, S. Marguet and J.-F. Ferrero. A digital image correlation method for tracking planar motions of rigid spheres: application to medium velocity impacts. Experimental Mechanics. 54(8)1453-1466. 2014 [DOI] [HAL]
[ACL119]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Comparison between the classic sensor embedding method and the monitoring patch embedding method for composites instrumentation. Applied Composite Materials. 21(5)707-724. 2014 [DOI]
[ACL120]P. Navarro, F. Pascal, J. Aubry, S. Marguet, J.-F. Ferrero, S. Lemaire and P. Rauch. Semi-continuous approach for the study of impacts on woven composite laminates: modeling interlaminar behaviour with a specific interface element. International Journal of Impact Engineering. , . 2014 [DOI]
[ACL121]N. Cadorin, R. Zitoune, P. Seitier and F. Collombet. Analysis of damage mechanism and tool wear while drilling of 3D woven composite materials using internal and external cutting fluid. Journal of Composite Materials. In press, . 2014 [DOI]
[ACL122]K. Wong, X. Gong, S. Aivazzadeh and N. Tamin. R-Curve Modelling of Mode I Delamination in Multidirectional Carbon/Epoxy Composite Laminates Applied Mechanics and Materials (Volume 606), Materials, Industrial and Manufacturing Engineering Research Advances 1.2, Chapter 2: Manufacturing Engineering, Edited by D. Applied Mechanics and Materials. 606, 159-163. 2014
[ACL123]N. Hongkarnjanakul, S. Rivallant, C. Bouvet and A. Miranda. Permanent indentation characterization for low-velocity impact modelling using three-point bending test. Journal of Composite Materials. 48, 2441-2454. 2014 [DOI]
[ACL124]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Discrete ply modelling of open hole tensile tests. Composite Structures. 113, 369-381. 2014 [DOI]
[ACL125]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Study of the surface defects and dust generated during trimming of CFRP: influence of tool geometry, machining parameters and cutting speed range. Composites Part - A: Applied Science and Manufacturing. 66, 142-154. 2014 [DOI]
[ACL126]H.A. Israr Ahmad, S. Rivallant, C. Bouvet and J.-J. Barrau. Finite Element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept. Composites Part - A: Applied Science and Manufacturing. 62, 16-25. 2014 [DOI]
[ACL127]L. Robert and G. Dusserre. Assessment of thermoset cure-induced strains by fibre Bragg grating sensor. Polymer Engineering and Science. 54(7)1585–1594. 2014 [DOI]
[ACL128]S. Rivallant, C. Bouvet, E. Abi Abdallah, B. Broll and J.-J. Barrau. Experimental analysis of CFRP laminates subjected to Compression After Impact: the role of impact-induced cracks in failure. Composite Structures. 111, 147-157. 2014 [DOI]
[ACL129]L. Robert and G. Dusserre. Anisothermal thermosetting resin cure monitored by optical fiber refractometer. Polymer Engineering and Science. 54(3)626-635. 2014 [DOI]
[ACL130]T. Ramananantoandro, P. Larricq and O. Eterradossi. Relationships between 3D roughness parameters and visuotactile perception of surfaces of maritime pinewood and MDF. Holzforschung. 68(1)93-102. 2014 [DOI]
[ACL131]L. Balea, G. Dusserre and G. Bernhart. Mechanical behaviour of plain-knit reinforced injected composites: effect of inlay yarns and fibre type. Composites Part B: Engineering. 56, 20-29. 2014 [DOI]
[ACL132]P. Cheng, X. Gong, S. Aivazzadeh and X. Xiao. Experimental observation of tensile behavior of patch repaired composites. Polymer Testing. (34)146–154. 2014 [DOI]
[ACL133]E. Pavlenko, F. Boyer, P. Puech, P. Olivier, S. King and R. Heenan. Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite. Journal of Applied Physics. 115(234901). 2014 [DOI]
[ACL134]I. El Sawi, H. Bougherara, R. Zitoune and Z. Fawaz. Influence of the Manufacturing Process on the Mechanical Properties of Flax/Epoxy Composites. Journal of Biobased Materials and Bioenergy. 8, 1-8. 2014 [DOI]
[ACL135]M. Haddad, R. Zitoune, H. Bougherara, F. Eyma and B. Castanié. Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior. Composites Part B: Engineering. Vol. 57, 136-143. 2014 [DOI]
[ACL136]E. Bessard, O. De Almeida and G. Bernhart. Unified isothermal and non-isothermal modelling of neat PEEK crystallization. Journal of Thermal Analysis and Calorimetry. 115(2)1669-1678. 2014 [DOI]
[ACL137]K. Wong, X. Gong, S. Aivazzadeh and M.N. Tamin. R-curve Modelling of Mode I Delamination in Multidirectional Carbon/Epoxy Composite Laminates. Applied Mechanics and Materials. 606, 159-163. 2014 [DOI]
[ACL138]T. Kagnaya, C. Boher, L. Lambert, M. Lazare and T. Cutard. Microstructural analysis of wear micromechanisms of WC-6Co cutting tools during high speed dry machining. International Journal of Refractory Metals and Hard Materials. 42, 151-162. 2014 [DOI]
[ACL139]J. Aubry, P. Navarro, S. Marguet, J.-F. Ferrero, O. Dorival, L. Sohier and J.-Y. Cognard. Change of scale strategy for the microstructural modelling of polymeric rohacell foam. Computers, Materials and Continua. 39(1)21-47. 2014 [DOI] [HAL]
[ACL140]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Drilling of thick composite material with a small diameter twist drill. International Journal of Advanced Manufacturing Technology. 76, 1543–1553. 2014 [DOI]
[ACL141]M. Poitrimolt, M. Cheikh, G. Bernhart and V. Velay. Characterisation of the transverse mechanical properties of carbon/carbon composites by spherical indentation. Carbon. 66, 234-245. 2014 [DOI]
[ACL142]G. Dusserre, L. Balea and G. Bernhart. Effect of stretching the knitted reinforcement and inlay yarns on the composite elastic properties: a semi-analytical model. Composites Part - A: Applied Science and Manufacturing. 64, 185-193. 2014 [DOI]
[ACL143]I. El Sawi, Z. Fawaz, R. Zitoune and Z. Bougherara. An investigation of the damage mechanisms and fatigue life diagrams of flax fiber-reinforced polymer laminates. Journal of Materials Science. 49, 2338–2346. 2014 [DOI]
[ACL144]B. Vieille, V. Casado and C. Bouvet. Influence of matrix toughness and ductility on the compression after impact behavior of woven-ply thermoplastic and thermosetting composites: a comparative study. Composite Structures. 110, 207-218. 2014 [DOI]
[ACL145]R. D'Elia, G. Bernhart, T. Cutard, G. Peraudeau and M. Balat Pichelin. Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace. Acta Astronautica. 99, 242-251. 2014 [DOI]
[ACL146]T. Merzouki, E. Blond, N. Schmitt, M.-L. Bouchetou, T. Cutard and A. Gasser. Modelling of the swelling induced by oxidation in SiC-based refractory castables. Mechanics of Materials. 68(1)253–266. 2014 [DOI]
[ACL147]T. Kagnaya, L. Lambert, M. Lazard, C. Boher and T. Cutard. Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables. Simulation Modelling Practice and Theory. 42C, 84–97. 2014 [DOI]
[ACL148]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure. Composite Structures. 106, 549-559. 2013 [DOI]
[ACL149]L. Barrière, S. Marguet, B. Castanié, P. Cresta and J.-C. Passieux. An adaptive model reduction strategy for post-buckling analysis of stiffened structures. Thin-Walled Structures. 73, 81-93. 2013 [DOI] [HAL]
[ACL150]S. Rivallant, C. Bouvet and N. Hongkarnjanakul. Failure analysis of CFRP laminates subjected to Compression After Impact: FE simulation using discrete interface elements. Composites Part - A: Applied Science and Manufacturing. 55, 83-93. 2013 [DOI]
[ACL151]A. Kolopp, S. Rivallant and C. Bouvet. Experimental Study of Sandwich Structures as Armour against Medium-Velocity Impacts. International Journal of Impact Engineering. 61, 24-35. 2013 [DOI]
[ACL152]A. Kolopp, R. Alvarado, S. Rivallant and C. Bouvet. Modeling impact on aluminium sandwich including velocity effects in honeycomb core. Journal of Sandwich Structures and Materials. 15, 733-757. 2013 [DOI]
[ACL153]B. Haddag, T. Kagnaya, M. Nouari and T. Cutard. A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation. . 49(1)129-145. 2013 [DOI]
[ACL154]F. Cénac, R. Zitoune, F. Collombet and M. Deleris. Abrasive Water-Jet milling of aeronautic aluminum 2024-T3. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 227(3). 2013 [DOI]
[ACL155]O. Cherrier, P. Selva, V. Pommier-budinger, F. Lachaud and J. Morlier. Damage localization map using electromechanical impedance spectrums and inverse distance weighting interpolation: Experimental validation on thin composite structures. Structural Health Monitoring. 12(4)311-324. 2013 [DOI]
[ACL156]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and P. Prieto Corral. Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography. Composites Part - A: Applied Science and Manufacturing. 53, 75-87. 2013 [DOI]
[ACL157]P. Selva, O. Cherrier, V. Budinger, F. Lachaud and J. Morlier. Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks. Engineering Structures. 56, 794–804. 2013 [DOI]
[ACL158]A. Njionhou, F. Berthet and B. Castanié. Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven. International Journal of Advanced Manufacturing Technology. 65(9-12)1289-1302. 2013 [DOI]
[ACL159]R. Zitoune, M. El Mansori and V. Krishnaraj. Tribo-functional Design of Double Cone Drill Implications in Tool Wear During Drilling of Copper mesh/CFRP/Woven ply. Wear. 302(1-2)1560-1567. 2013 [DOI]
[ACL160]I. Maillet, L. Michel, G. Rico, M. Fressinet and Y. Gourinat. A New test methodology based on structural resonance for mode I fatigue delamination growth in a unidirectional composite. Composite Structures. 97, 353-362. 2013 [DOI]
[ACL161]H.A. Israr Ahmad, S. Rivallant and J.-J. Barrau. Experimental investigation on mean crushing stress characterization of carbon-epoxy plies under compressive crushing mode. Composite Structures. 96, 357-364. 2013 [DOI]
[ACL162]G. Dusserre, F. Nazaret, L. Robert and T. Cutard. Applicability of image correlation techniques to characterize asymmetric refractory creep during bending tests. Journal of the European Ceramic Society. 33(2)221–231. 2013 [DOI]
[ACL163]B. Hachemane, R. Zitoune, B. Bezzazi and C. Bouvet. Sandwich composites impact and indentation behaviour study. Composites Part B: Engineering. 51, 1-10. 2013
[ACL164]H. Abdulhamid, A. Kolopp, C. Bouvet and S. Rivallant. Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact. International Journal of Impact Engineering. 51, 1-12. 2013 [DOI]
[ACL165]A. Mazzoni, G. Bernhart and T. Cutard. Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming. Materialwissenschaft und Werkstofftechnik. 43(9)758-762. 2013 [DOI]
[ACL166]S. Almabouacif, K. Vijayan and R. Zitoune. An investigation on cutting forces and hole quality on drilling of multimaterial. Statistical and experimental analysis. Revue des Composites et des Materiaux Avances. 23(3)437-457 . 2013
[ACL167]B. Vieille, V.M. Casado and C. Bouvet. About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: a comparative study. Composite Structures. 101, 9-21. 2013 [DOI]
[ACL168]T. Rouault, C. Bouvet, V. Nègre and P. Rauch. Reversible rail shear apparatus applied to the study of woven laminate shear behavior. Experimental Mechanics. , . 2013 [DOI]
[ACL169]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices, B. Cosson and F. Schmidt. BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes. Polymer Composites. 34(8)1235–1244. 2013 [DOI]
[ACL170]P. Marguerès, T. Camps, M. Viargues and P. Olivier. Preliminary experimental study on the electrical impedance analysis for in-situ monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures. Measurement Science and Technology. 24(09)10pp. 2013 [DOI]
[ACL171]J. Le Dref, F. Eyma, G. Dessein, L.-E. Denaud and Y. Landon. Comparative study of tools in drilling composites T700-M21 and T800-M21. Advanced Materials Research. 201 - 698, 59-68. 2013 [DOI]
[ACL172]E. Paroissien, F. Gaubert, A. Da Veiga and F. Lachaud. Elasto-Plastic Analysis of Bonded Joints with Macro-Elements. Journal of Adhesion Science and Technology. 27(13)1464-1498. 2013 [HAL]
[ACL173]T. Ramananantoandro, M. Ramanakoto, A. Rajemison and F. Eyma. Relationship between density and aesthetic attributes of wood and preference of Malagasy consumers.. Annals of Forest Science. 70(Issue 6)649-658. 2013 [DOI]
[ACL174]A. Prabukarthi, V. Krishnaraj, M. Santhosh, M. Senthilkumar and R. Zitoune. Optimization and tool life study in drilling of Titanium (Ti-6Al-4V) alloy. International Journal of Machining and Machinability of Materials. 13(2/3)138-157. 2013 [DOI]
[ACL175]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Machinability and surface quality during high speed trimming of multi directional CFRP. International Journal of Machining and Machinability of Materials. 13(2/3)289-310. 2013 [DOI]
[ACL176]P. Navarro, S. Abrate, J. Aubry, S. Marguet and J.-F. Ferrero. Analytical modeling of indentation of composite sandwich beam. Composite Structures. 100, 79-88. 2013 [DOI]
[ACL177]M. Saleem, L. Toubal, R. Zitoune and H. Bougherara. Investigating the effect of machining processes on the mechanical behaviour of composite plates with circular holes. Composites Part - A: Applied Science and Manufacturing. 55, 169–177. 2013 [DOI]
[ACL178]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. Applied Composite Materials. 19(6)885-899. 2012 [DOI]
[ACL179]C. Bouvet, S. Rivallant and J.-J. Barrau. Low velocity impact modeling in composite laminates capturing permanent indentation. Composites Science and Technology. 72(16)1977-1988. 2012 [DOI]
[ACL180]I. El Sawi, P. Olivier, P. Demont and H. Bougherara. Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes. Composites Science and Technology. 73, 19-26. 2012 [DOI]
[ACL181]I. El Sawi, P. Olivier, P. Demont and H. Bougherara. Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin. Journal of applied polymer science. 126(1)358-366. 2012 [DOI]
[ACL182]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Discrete ply model of circular pull-through test of fasteners in laminates. Composite Structures. 94(10)3082–3091. 2012 [DOI]
[ACL183]I. Tawk, J. Aubry, P. Navarro, J.-F. Ferrero, S. Marguet, S. Rivallant, S. Lemaire and P. Rauch. Study of impact on helicopter blade. Engineering Failure Analysis. 24, 38-45. 2012 [DOI]
[ACL184]P. Navarro, S. Marguet, J.-F. Ferrero, J.-J. Barrau and S. Lemaire. Modelling of impacts on sandwich structures. Mechanics of Advanced Materials and Structures. 19(7)523-529. 2012 [DOI]
[ACL185]L. Peng, X. Gong, K. Wong and L. Guillaumat. Application of cohesive-zone models to delamination behaviour of composite material . World Journal of Engineering. 9(2)109-118. 2012
[ACL186]P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero, S. Lemaire and P. Rauch . Semi-continuous approach for the modelling of thin woven composite panels applied to oblique impacts on helicopter blades. Composites Part - A: Applied Science and Manufacturing. 43(6)871-879. 2012 [DOI]
[ACL187]V. Krishnaraj, A. Prabukarthi, A. Ramanathan, N. Elanghovan, M.S. Kumar, R. Zitoune and J.P. Davim. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates. Composites Part B: Engineering. 43(4)1791-1799. 2012 [DOI]
[ACL188]P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero, S. Lemaire and P. Rauch. Experimental and numerical study of oblique impact on woven composite sandwich structure : Influence of the firing axis orientation. Composite Structures. 94(6)1967-1972. 2012 [DOI]
[ACL189]R. Zitoune, V. Krishnaraj, S. Almabouacif, F. Collombet, M. Sima and A. Jolin. Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich. Composites Part B: Engineering. 43(3)1480-1488. 2012 [DOI]
[ACL190]M. Torres, L. Crouzeix, F. Collombet, B. Douchin and Y.-H. Grunevald. Mechanical characterization of an alternative technique to embed sensors in composite structures: the monitoring patch. Applied Composite Materials. 19(3-4)379-391. 2012 [DOI]
[ACL191]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Application of high-performance computing to a bolt static tensile test. International Journal on Interactive Design and Manufacturing. 6, 1-9. 2012 [DOI]
[ACL192]A. Mir, B. Bezzazi, R. Zitoune and F. Collombet. Study of mechanical and hygrothermal properties of agglomerated cork. Mechanika. 1, 40-45. 2012 [DOI]
[ACL193]L. Crouzeix, F. Cenac, F. Collombet, R. Zitoune, Y.-H. Grunevald and M. Déléris. Comportement d’une réparation en escalier obtenue par Jet d’Eau Abrasif. Matériaux et Techniques. 100, 681–690. 2012
[ACL194]M. Cusic, F. Abu-farha, P. Lours, Y. Le Maoult, G. Bernhart and M. Kraisheh. Towards superplastic forming of AZ31 magnesium alloy with controlled microstructure. Materialwissenschaft und Werkstofftechnik. 43(9)810-816. 2012 [DOI]
[ACL195]P. Rahmé, C. Bouvet, S. Rivallant, V. Fascio and G. Valembois. Experimental investigation of impact on composite laminates with protective layers. Composites Science and Technology. 72(2)182-189. 2012 [DOI] [OATAO]
[ACL196]L.-E. Denaud, L. Bleron, F. Eyma and R. Marchal. Wood peeling process monitoring: a comparison of signal processing method to estimate veneer average lathe check frequency. European Journal of Wood and Wood Products. 70(Issue 1)253-261. 2012
[ACL197]N. Lebaal, F. Schmidt, S. Puissant and D. Schlaefli. An optimization method with experimental validation for the design of extrusion dies for a range of different materials and operating conditions. Polymer Engineering and Science. 52(12)2675–2687. 2012 [DOI]
[ACL198]M. Haddad, R. Zitoune, F. Eyma, B. Castanié and H. Bougherara. Surface quality and dust analysis in high speed trimming of CFRP . Applied Mechanics and Materials. 13(2/3)57-62. 2012 [DOI]
[ACL199]V. Velay, T. Cutard and N. Guegan. Thermal behaviour modelling of superplastic forming tools. Materialwissenschaft und Werkstofftechnik. 43(9)799-804 . 2012 [DOI]
[ACL200]J. Toral, B. Castanié, J.-J. Barrau and N. Swiergel. Multi-level analysis of low-cost Z-pinned composite joints; Part 2: Joint behaviour. Composites Part - A: Applied Science and Manufacturing. 42(12)2082-2092. 2011
[ACL201]J. Toral, B. Castanié, J.-J. Barrau and N. Swiergel. Multi-level analysis of low-cost Z-pinned composite joints Part 1: Single Z-pin behaviour. Composites Part - A: Applied Science and Manufacturing. 42(12)2070-2081. 2011
[ACL202]G. Dusserre, G. Bernhart, F. Schmidt and G. Dour. Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests. Journal of Non-Newtonian Fluid Mechanics. 166(21-22)1229-1238. 2011 [DOI]
[ACL203]A. Shahdin, J. Morlier, L. Mezeix, C. Bouvet and Y. Gourinat. Evaluation of the impact resistance of various composite sandwich beams by vibration tests. Shock and Vibration. 18(6)789-805. 2011 [DOI] [OATAO]
[ACL204]R. Zitoune, L. Crouzeix, F. Collombet, T. Tamine and Y.H. Grunevald. Behaviour of composite plates with drilled and moulded hole under tensile load. Composite Structures. 93(9)2384-2391. 2011 [DOI]
[ACL205]X. Xiao, H. G. Gia and X. Gong. Strength Prediction of a Triaxially Braided Composite. Composites Part - A: Applied Science and Manufacturing. 8(42)1000–1006. 2011
[ACL206]Z. Zhang, D. Delagnes and G. Bernhart. Cyclic behaviour and plastic strain memory effect of 55NiCrMoV7 steel under low cycle fatigue. Rare Metals. 30(SI)443-446. 2011 [DOI]
[ACL207]P. Rahmé, Y. Landon, F. Lachaud, R. Piquet and P. Lagarrigue. Analytical models of composite material drilling. International Journal of Advanced Manufacturing Technology. 52(5)609-617. 2011 [DOI]
[ACL208]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: Experimental. Composites Science and Technology. 71(3)289-296. 2011 [DOI]
[ACL209]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Fatigue crack growth in thin notched woven glass composites under tensile loading, Part II: Modelling. Composites Science and Technology. 71(3)297-305. 2011 [DOI]
[ACL210]P. Cheng, X. Gong, D. Hearn and A. Shahram. Tensile behaviour of patch-repaired CFRP laminates . Composite Structures. 93(2)582-589. 2011
[ACL211]G. Dusserre, E. Jourdain and G. Bernhart. Effect of deformation on the in-plane permeability of knitted glass preform. Polymer Composites. 32(1)18-28. 2011 [DOI]
[ACL212]T. Kagnaya, M. Lazard, L. Lambert, C. Boher and T. Cutard. Temperature evolution in a WC-6%Co cutting tool during turning machining: experiment and finite element simulations. WSEAS Transactions on Heat and Mass Transfer. 6(3)71-80. 2011
[ACL213]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method. Applied Mechanics and Materials. 62, 57-65. 2011 [DOI]
[ACL214]C. Garnier, M.-L. Pastor, F. Eyma and B. Lorrain. The detection of aeronautical defects in-situ on composite structures using Non Destructive Testing. Composite Structures. 93(5)1328-1336. 2011 [DOI]
[ACL215]B. Cosson, F. Schmidt, Y. Le Maoult and M. Bordival. Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method. International Journal of Material Forming. (4)1–10. 2011 [DOI]
[ACL216]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Drilling thick composite materials using large diameter drills. International Journal of Machining and Machinability of Materials. 10(3)202-221. 2011
[ACL217]F. Schmidt, F. Chinesta, M. Mongeau and N. Pirc. Efficient Mold cooling optimization by using model reduction. International Journal of Material Forming. 4, 73–82. 2011 [DOI]
[ACL218]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Simulations of an Infrared Composite Curing Process . Advanced Engineering Materials. 13(7)604-608. 2011 [DOI]
[ACL219]X. Gong, A. Hurez and G. Verchery. On the determination of delamination toughness using multidirectional DCB specimens. Polymer Testing. 29(6)658-666. 2010
[ACL220]M. Torres Arellano, L. Crouzeix, B. Douchin, F. Collombet, H. Hernandez-Moreno and J.-L. Gonzalez-Velazquez. Strain field measurment of filament-wound composites at ±55° using digital image correlation: an approach for unit cells employing flat specimens. Composite Structures. 92(10)2457-2464. 2010 [DOI]
[ACL221]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of a new sandwich structure with carbon fiber network core. Journal of Sandwich Structures and Materials. 12(5)569-589. 2010 [DOI] [OATAO]
[ACL222]A. Mir, R. Zitoune, F. Collombet and B. Bezzazi. Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate. Journal of Reinforced plastics and composites. 11(29)1669-1680. 2010 [DOI]
[ACL223]M. Hautier, D. Lévêque, C. Huchette and P. Olivier. Investigation of composite repair method by liquid resin infiltration. Plastics, Rubber and Composites. 39(3-5)200-207. 2010 [DOI]
[ACL224]R. Zitoune, V. Krishnaraj and F. Collombet. Study of drilling of composite material and aluminium stack. Composite Structures. 92(5)1246-1255. 2010 [DOI]
[ACL225]B. Castanié, S. Crézé, L. Risse, J.J. Barrau and F. Lachaud. Experimental analysis of failures in filled hole compression tests of carbon/epoxy laminate. Composite Structures. 92(5)1192-99. 2010 [DOI]
[ACL226]P. Olivier and I. El Sawi. Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon / epoxy laminates at constant Tg and degree of cure. International Journal of Material Forming. 3(Suppl 2)S1373–S1389. 2010 [DOI]
[ACL227]I. Tawk, P. Navarro, J.-F. Ferrero, J.-J. Barrau and E. Abdullah. Composite delamination modelling using a multi-layered solid element. Composites Science and Technology. 70(2)207-214. 2010 [DOI]
[ACL228]I. Tawk, J.-F. Ferrero, J.-J. Barrau, E. Abdullah and M. Sudre. A Multilayered Solid Element used to Model Composite Delamination. Advanced Composites Letters. 19(1)23-33. 2010
[ACL229]P. Lavernhe, E. Estivalèzes, F. Lachaud, C. Lodter and R. Piquet. Orthodontic bonding: Finite element for standardized evaluations. International Journal of Adhesion and Adhesives. 30(1)21–29. 2010 [DOI]
[ACL230]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. International Journal of Fatigue. 32(1)60-65. 2010 [DOI]
[ACL231]N. Lebaal, F. Schmidt and S. Puissant. Optimisation of extrusion flat die design and die wall temperature distribution, using Kriging and response surface method. International Journal of Materials and Product Technology. 38(2/3)307 - 322. 2010 [DOI]
[ACL232]R. Gantois, A. Cantarel, J.-N. Felices and F. Schmidt. Numerical simulation of Resin Transfer Molding using BEM and Level Set method. International Journal of Material Forming. 3(Suppl 1)635-638. 2010 [DOI]
[ACL233]W. Trabelsi, L. Michel and R. Othomene. Effects of Stitching on Delamination of Satin Weave Carbon-Epoxy Laminates Under Mode I, Mode II and Mixed-Mode I/II Loadings. Applied Composite Materials. 17(6)575-595. 2010 [DOI] [OATAO]
[ACL234]S. Chevalier, J.-N. Felices, X. Pessoles and W. Rubio. Study of polynomial path parameterisation for side milling of sculptured surfaces. International Journal of Machining and Machinability of Materials. 8(3-4)384-407. 2010
[ACL235]E. Bilbao, E. Blond, C. Michel, T. Cutard, N. Schmitt and J. Poirier . A new method to determine the Young's modulus of refractory materials. Interceram. 59(1)34-38. 2010
[ACL236]N. Lebaal, F. Schmidt and S. Puissant. Application of a Response Surface Method to the Optimal Design of the Wall Temperature Profiles in Extrusion Die. International Journal of Material Forming. 3(1)47-58. 2010 [DOI]
[ACL237]M. Bordival, F. Schmidt, Y. Le Maoult and B. Cosson. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. International Journal of Material Forming. 3(Suppl 1)809– 812. 2010 [DOI]
[ACL238]C. Paris, P. Olivier and G. Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps. International Journal of Material Forming. 3(Suppl 1)639-642. 2010 [DOI]
[ACL239]Y. Ledru, G. Bernhart, F. Schmidt, R. Piquet and L. Michel. Coupled visco-mechanical and diffusion void growth modelling during composite curing. Composites Science and Technology. 70, 2139-2145. 2010 [DOI] [OATAO]
[ACL240]E. Abdullah, I. Tawk, J.-F. Ferrero and J.-J. Barrau. Mode I delamination modelling in a composite plate using the plate behaviour of a new multilayered solid element. Mechanics of Advanced Materials and Structures. 17(1)60-67. 2010
[ACL241]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. International Journal of Material Forming. 3(Suppl 1)587-590. 2010 [DOI]
[ACL242]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification of a macroscopic anisotropic damage model using digital image correlation and the equilibrium gap method. European Journal of Computational Mechanics. 19(1-2-3)229-240. 2010 [DOI]
[ACL243]E. Abdullah, I. Tawk, J.-F. Ferrero and J.-J. Barrau. Mode I Delamination Modelling in a Composite Plate using the Plate Behavior of a new Multilayered Solid Element. Mechanics of Advanced Materials and Structures. 17(1)60-67. 2010 [DOI]
[ACL244]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Measuring strains through the thickness of a composite structural specimen subjected to bending. Experimental Mechanics. 49(6)877-880. 2009 [DOI]
[ACL245]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Monitoring the Effects of Impact Damages on Modal Parameters in Carbon Fiber Entangled Sandwich Beams. Engineering Structures. 31(12)2833-2841. 2009 [DOI] [OATAO]
[ACL246]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. An orthotropic variant of the equilibrium gap method applied to the analysis of a biaxial test on a composite material. Composites Part - A: Applied Science and Manufacturing. 40(11)1732–1740. 2009 [DOI]
[ACL247]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending. Composite Structures. 91(1)48-55. 2009 [DOI]
[ACL248]M. Mulle, F. Collombet, P. Olivier, R. Zitoune, C. Huchette, F. Laurin and Y.H. Grunevald. Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen. Composites Part - A: Applied Science and Manufacturing. 40(10)1534-1544. 2009 [DOI]
[ACL249]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Fabrication and mechanical testing of glass fiber entangled sandwich beams : a comparison with honeycomb and foam sandwich beams. Composite Structures. 90(4)404-412. 2009 [DOI] [OATAO]
[ACL250]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding Part 2 : Element and panel level. Composite Structures. 90(10)392–403. 2009 [DOI]
[ACL251]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. Multi-level experimental and numerical analysis of composite stiffener debonding Part 1 : Non-specific specimen level. Composite Structures. 90(10)381–391. 2009 [DOI]
[ACL252]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse, P. Davies and J.-L. Gonzalez-Velazquez. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: II. Process monitoring. Applied Composite Materials. 16(4)197-209. 2009 [DOI]
[ACL253]T. Kagnaya, C. Boher, L. Lambert, M. Lazard and T. Cutard. Wear mechanisms of WC–Co cutting tools from high-speed tribological tests. Wear. 267(5-8)890-897. 2009 [DOI]
[ACL254]E. Abi Abdallah, C. Bouvet, S. Rivallant and J.-J. Barrau. Experimental analysis of damage creation and permanent indentation on highly oriented plates. Composites Science and Technology. 6(7-8)1238-1245. 2009 [DOI] [OATAO]
[ACL255]R. Gantois, E. Jourdain and G. Dusserre. Recent patents on in-plane permeability measurement of LCM composite reinforcements. Recent Patents on Engineering. 3(2)109-116. 2009
[ACL256]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse and P. Davies. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: III. In-service external pressure loading. Applied Composite Materials. 16(3)135-147. 2009 [DOI]
[ACL257]H. Hernandez-Moreno, F. Collombet, B. Douchin, D. Choqueuse, P. Davies and J.-L. Gonzalez-Velazquez. Entire life time monitoring of filament wound composite cylinders using Bragg grating sensors: I. Adapted tooling and instrumented specimen. Applied Composite Materials. 16(3)173-182. 2009 [DOI]
[ACL258]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud, R. Piquet, B. Marguet, J. Bouriquet and C. Leroy. Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill. SAE International Journal of Aerospace. 1, 776-781. 2009
[ACL259]A. Cantarel, E. Lacoste, C. Arvieu, O. Mantaux and M. Danis. Numerical Simulation of Segregation Phenomena Coupled with Phase Change and Fluid Flow: Application to Metal Matrix Composites Processing. Numerical Heat Transfer; Part A: Applications. 55(9)880-892. 2009 [DOI]
[ACL260]C. Bouvet, B. Castanié, M. Bizeul and J.-J. Barrau. Low velocity impact modelling in laminate composite panels with discrete interface elements. International Journal of Solids and Structures. 46(14-15)2809-2821. 2009 [DOI]
[ACL261]M. Mulle, F. Collombet, P. Olivier and Y.H. Grunevald. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen. Composites Part - A: Applied Science and Manufacturing. 40(1)94-104. 2009 [DOI]
[ACL262]P. Marguerès, J.-N. Périé, J.G. Perez, F. Collombet and Y.-H. Grunevald. Characterization of a composite structure obtained by RFI using HexFIT (R) semi-products. Composites Science and Technology. 69(1)117-124. 2009 [DOI]
[ACL263]N. Lebaal, F. Schmidt and S. Puissant. Design and optimization of three-dimensional extrusion dies, using constraint optimization algorithm. Finite Elements in Analysis and Design. 45, 333 –340. 2009 [DOI]
[ACL264]N. Lebaal, F. Schmidt, S. Puissant and D. Schlaefli. Design of optimal extrusion die for a range of different materials. Polymer Engineering and Science. 49(3)432-440. 2009 [DOI]
[ACL265]M. Bordival, Y. Le Maoult and F. Schmidt. Optimization of preform temperature distribution for the stretch-blow molding of PET bottles: Infrared heating and blowing modelling. Polymer Engineering and Science. 49(4)783-793. 2009 [DOI]
[ACL266]O. Nemes and F. Lachaud. Modeling of Cylindrical Adhesively Bonded Joints. Journal of Adhesion Science and Technology. 23(10-11)1383-1393. 2009 [DOI]
[ACL267]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction. International Journal of Material Forming. 2(1)271–274. 2009 [DOI]
[ACL268]B. Cosson, F. Schmidt and Y. Le Maoult. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. International Journal of Material Forming. 2(1)267-270. 2009 [DOI]
[ACL269]G. Dusserre, G. Dour and G. Bernhart. In-situ determination of the heat flux density at the glass/mould interface during a glass pressing production cycle. International Journal of Thermal Sciences. 48(21)428-439. 2009 [DOI]
[ACL270]F. Deschaux-beaume, N. Fréty and T. Cutard. Oxidation Modeling of a Si3N4-TiN Composite: Comparison Between Experiment and Kinetic Models. Ceramics International. 35(5)1709-1718. 2009 [DOI]
[ACL271]M. Tata, D. Miroud, S. Lebaili and T. Cutard. The study of properties of WC-based and W-based composites fabricated by infiltration with liquid Cu-Mn binder. Asian Journal of Scientific Research. 2, 76-86. 2009
[ACL272]L. Mézeix, C. Bouvet, J. Huez and D. Poquillon. Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression. Journal of Materials Science. 44(14)3652-3661. 2009 [DOI]
[ACL273]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Experimental and numerical study of compression after impact of sandwich structures with metallic skins. Composites Science and Technology. 69(1)50-59. 2009 [DOI]
[ACL274]O. De Almeida, F. Lagattu and J. Brillaud. Analysis by a 3D DIC technique of volumetric deformation gradients: Application to polypropylene/EPR/talc composites. Composites Part - A: Applied Science and Manufacturing. 39(8)1210-1217. 2008 [DOI]
[ACL275]Z. Zhang, G. Bernhart and D. Delagnes. Cyclic behaviour constitutive modelling of a tempered martensitic steel including ageing effect. International Journal of Fatigue. 30(4)706-716. 2008 [DOI]
[ACL276]H. Hernandez-moreno, B. Douchin, F. Collombet, P. Davies and D. Choqueuse. Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Composites Science and Technology. 68(3-4)1015-1024. 2008 [DOI]
[ACL277]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles. International Journal of Material Forming. 1(1)1023-1026. 2008 [DOI]
[ACL278]G. Régnier, D. Dray, E. Jourdain, S. Le Roux and F. Schmidt. A simplified method to determine the 3D orientation of an injection molded fiber-filled polymer. Polymer Engineering and Science. 48(11)2159-2168. 2008 [DOI]
[ACL279]G. Bernhart, F. Nazaret and T. Cutard. Fiber reinforced refractory castables for SPF toolings. Materialwissenschaft und Werkstofftechnik. 39(4-5)317-321. 2008 [DOI]
[ACL280]P. Marguerès, J. Lopez-torres, J.-N. Périé, K. Syed Muhammad and F. Collombet. Combined approach for the characterization of composites manufactured by RFI and industrial application. Journal of Composite Materials. 42(2)189-209. 2008 [DOI]
[ACL281]P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Study into causes of damage to carbon epoxy composite material during the drilling process. International Journal of Machining and Machinability of Materials. 3(3-4)309-325. 2008 [DOI]
[ACL282]S. Lomov, P. Boisse, E. De Luycker, F. Morestin, K. Vanclooster, D. Vandepitte, I. Verpoest and A. Willems. Full-field strain measurements in textile deformability studies . Composites Part - A: Applied Science and Manufacturing. 39(8)1232-1244. 2008 [DOI]
[ACL283]J. Cao, R. Akkerman, P. Boisse, J. Chen, H.S. Cheng, E.F. De Graaf, J.L. Gorczyca, P. Harrison, G. Hivet, J. Launay, W. Lee, L. Liu, S.V. Lomov, A. Long, E. De Luycker, F. Morestin, J. Padvoiskis, X.Q. Peng, J. Sherwood, T. Stoilova, X.M. Tao, I. Verpoest, A. Willems, J. Wiggers, T.X. Yu and B. Zhu. Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results. Composites Part - A: Applied Science and Manufacturing. 39(6)1037-1053. 2008 [DOI]
[ACL284]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Nonlinear Finite Element analysis of inserts in sandwich structures. Composites Part B: Engineering. 39, 1077–1092. 2008
[ACL285]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core crush criteria to determine the strength of sandwich composite structures subjected to compression after impact.. Composite Structures. 86, 243–250. 2008
[ACL286]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. An experimental and numerical study on omega stringer debonding. Composite Structures. 86, 233-242. 2008
[ACL287]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and F. Chinesta. Optimizaton of BEM-based cooling channels injection moulding using model reduction. International Journal of Material Forming. 1(1)1043-1046. 2008 [DOI]
[ACL288]B. Castanié, C. Bouvet, Y. Aminanda, J.-J. Barrau and P. Thevenet. Modelling of low energy/low velocity impact on nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering. 35, 620-634. 2008 [OATAO]
[ACL289]N. Pirc, F. Bugarin, F. Schmidt and M. Mongeau. 3D BEM-based cooling-channel shape optimization for injection moulding processes. International Journal for Simulation and Multidisciplinary Design Optimization. 2(3)245-252. 2008 [DOI]
[ACL290]R. Zitoune, F. Collombet and G. Hernaiz Lopez. Experimental and analytical study of the influence of HexFit® glass fiber composite manufacturing process on delamination during drilling. International Journal of Machining and Machinability of Materials. 3(3/4)326-342. 2008 [DOI]
[ACL291]L. Robert, F. Nazaret, T. Cutard and J.-J. Orteu. Use of 3-D Digital Image Correlation to characterize the mechanical behavior of a Fiber Reinforced Refractory Castable. Experimental Mechanics. 47(6)761-773. 2007 [DOI] [HAL]
[ACL292]Z. Zhang, Y.-H. Qi, D. Delagnes and G. Bernhart. Microstructure Variation and Hardness Diminution During Low Cycle Fatigue of 55NiCrMoV7 Steel . Journal of Iron and Steel Research International. 14(6)68-73. 2007 [DOI]
[ACL293]E. Abdullah, J.-F. Ferrero, J.-J. Barrau and J.-B. Mouillet. Development of a new finite element for composite delamination analysis. Composites Science and Technology. 67(10)207-214. 2007
[ACL294]J.-J. Orteu, T. Cutard, D. Garcia, E. Cailleux and L. Robert. Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres. Strain. 43(2)96-108. 2007 [DOI]
[ACL295]E. Paroissien, M. Sartor, J. Huet and F. Lachaud. Analytical Two-Dimensional Model of a Hybrid (Bolted/Bonded) Single-Lap Joint. Journal of Aircraft. 44(2)573-582. 2007
[ACL296]G. Bernhart, F. Nazaret and T. Cutard. Fibre reinforced refractory castables : an alternative solution for SPF die manufacturing. Materials Science Forum. 551-552, 37-42. 2007 [DOI]
[ACL297]J.-F. Ferrero, I. Tawk, S. Rivallant, J.-J. Barrau and M. Sudre. Fibre orientation effects on high strain rate of carbon / epoxy composites. Advanced Composites Letters. 16(1)25-31. 2007 [OATAO]
[ACL298]F. Deschaux-beaume, N. Fréty, T. Cutard and C. Colin. “Oxidation modelling of a Si3N4–TiN ceramic: Microstructure and kinetic laws”. Ceramics International. 33(7)1331-1339 . 2007
[ACL299]S. Petit, C. Bouvet, A. Bergerot and J.-J. Barrau. Impact And Compression After Impact Experimental Study Of A Composite Laminate With A Cork Thermal Shield. Composites Science and Technology. 67, 3286-3299. 2007 [DOI]
[ACL300]Z. Zhang, Y.-H. Qi, X.-J. Wang, D. Delagnes and G. Bernhart. Relationship between microstructure and tempering time and temperature in 55NiCrMoV7 steel . transactions of materials and heat treatment. 28(2)73-76. 2007
[ACL301]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Development of instrumented composite cylinders. Materials Science Forum. 560, 59-66. 2007 [DOI]
[ACL302]M. Mulle, R. Zitoune, F. Collombet, P. Olivier and Y.H. Grunevald. Thermal expansion of carbon–epoxy laminates measured with embedded FBGS – Comparison with other experimental techniques and numerical simulation. Composites Part - A: Applied Science and Manufacturing. 38(5)1414-1424. 2007 [DOI]
[ACL303]Z. Zhang , D. Delagnes and G. Bernhart. Ageing effect on cyclic plasticity of a tempered martensitic steel. International Journal of Fatigue. 29(2)336-346. 2007 [DOI]
[ACL304]R. Zitoune and F. Collombet. Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures. Composites Part - A: Applied Science and Manufacturing. 38(3)858-866. 2007 [DOI]
[ACL305]F. Collombet, M. Mulle, Y.-H. Grunevald and R. Zitoune. Multiscale method for optimal design of composite structures incorporating sensors. Solid Mechanics and Its Applications . 135, 141-149. 2006 [DOI]
[ACL306]F. Lachaud, E. Haramburu and P. Jetteur. Modélisation élastoplastique endommageable des composites . Mécanique & Industries. 7(4). 2006
[ACL307]L. Gornet, S. Marguet and G. Marckmann. Finite Element modeling of Nomex honeycomb cores: Failure and effective elastic properties. Computers, Materials and Continua. 4(2)63-74. 2006 [DOI]
[ACL308]V. Velay, G. Bernhart and L. Penazzi. Cyclic behavior modeling of a tempered martensitic hot work tool steel. International Journal Of Plasticity. 33(3)459-496. 2006 [DOI] [HAL]
[ACL309]S. Marguet, P. Rozycki and L. Gornet. A rate dependent constitutive model for glass-fiber / epoxy-matrix woven fabrics. Computers, Materials and Continua. 4(3)119-135. 2006 [DOI]
[ACL310]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Dynamic buckling of foam stabilised composite skin. Composite Structures. 7(4)486-493. 2006 [DOI] [OATAO]
[ACL311]F. Nazaret, H. Marzagui and T. Cutard. Influence of the mechanical behaviour specificities of damaged refractory castables on the Young's modulus determination. . Journal of the European Ceramic Society. 26(8)1429-1438. 2006
[ACL312]P. Prombut, L. Michel, F. Lachaud and J.-J. Barrau. Delamination of multidirectional composite laminates at 0/theta° interface,. . 73(16)2427-2442. 2006 [DOI] [OATAO]
[ACL313]V. Velay, G. Bernhart, D. Delagnes and L. Penazzi. A continuum damage model applied to high-temperalture fatigue lifetime prediction of a martensitic tool steel. Fatigue and Fracture of Engineering Materials and Structures. 28(11)1009-1023. 2005 [DOI] [HAL]
[ACL314]J.-J. Barrau, S. Creze and B. Castanié. Buckling and post-buckling of beams with flat webs. Thin-Walled Structures. 43(6)877-1002. 2005
[ACL315]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Experimental and numerical analysis of inserts in sandwich structures. Applied Composite Materials. 12(3-4)177-191. 2005
[ACL316]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Experimental analysis and modeling of the crushing of honeycomb cores. Applied Composite Materials. 12(3-4)213-217. 2005
[ACL317]N. Lebaal, S. Puissant and F. Schmidt. Rheological parameters identification using in situ experimental data of a flat die extrusion . Journal of Materials Processing Technology. 164–165, 1524-1529. 2005 [DOI]
[ACL318]E. Cailleux, T. Cutard and G. Bernhart. Study of a ceramic refractory reinforced with metallic fibres : from the microstructure to the mechanical behaviour. Industrial Ceramics. 25(1). 2005
[ACL319]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process . Journal of Materials Processing Technology. 162-163, 484-491 . 2005 [DOI]
[ACL320]E. Cailleux, T. Cutard and G. Bernhart. Pullout of steel fibres from a refractory castable : experiment and modelling. Mechanics of Materials. 37(4)427-445 . 2005 [DOI]
[ACL321]F. Eyma, P.-J. Meausoone, P. Larricq and R. Marchal. Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values. Annals of Forest Science. 62, 441-447. 2005 [DOI]
[ACL322]C.Y. Gao, P. Lours and G. Bernhart. Thermomechanical stress analysis of superplastic forming tools. Journal of Materials Processing Technology. 169, 281-291. 2005 [DOI]
[ACL323]R. Zitoune, F. Collombet, R. Piquet, F. Lachaud and P. Pasquet. Experiment–calculation comparison of the cutting conditions representative of the long fiber composite drilling phase. Composites Science and Technology. 65(3/4). 2005 [DOI]
[ACL324]B. Castanié, J.-J. Barrau, J.-P. Jaouen and S. Rivallant. Combined shear/compression structural testing of asymmetric sandwich structures. Experimental Mechanics. 44(5)461-472. 2004
[ACL325]Z. Zhang, D. Delagnes and G. Bernhart. Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 380(1-2)222-230. 2004 [DOI]
[ACL326]J.-F. Ferrero, E. Yettou, J.-J. Barrau and S. Rivallant. Analysis of a dry friction problem under small displacements: application to a bolted joint. Wear. 2(11)1135-1143. 2004 [DOI] [OATAO]
[ACL327]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Buckling of foam stabilised composite beams analytical modelling and experiments. Advanced Composites Letters. 13(1)77-84. 2004 [OATAO]
[ACL328]V. Garat, G. Bernhart and L. Hervy. Influence of design and process parameters on service life of nut hot forging dies. Materials Science Forum. 147, 359-369. 2004 [DOI]
[ACL329]F. Eyma, P.-J. Meausoone and P. Martin. Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B. Annals of Forest Science. 61, 55-64. 2004 [DOI]
[ACL330]H. Marzagui and T. Cutard. Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM. Journal of Materials Processing Technology. 155-156, 1474-1481. 2004
[ACL331]G. Bernhart, F. Nazaret, A. Martinier, C.Y. Gao, D. Garriga Majo, T. Cutard and P. Lours. Design of SPF dies based on advanced material behaviour models. Materials Science Forum. 447-448, 123-130. 2004 [DOI]
[ACL332]E. Conforto, T. Cutard and D. Mari. The role of Mo in the hard-phase grains of (Ti,Mo)(C,N)-Co cermets. Philosophical Magazine. 11(6)1717-1733. 2004
[ACL333]P. Lours, H.V. Bui, A. Nafi, O. Mercier and G. Bernhart. Rapid Tooling for Injection Moulding Process . Materials Science Forum. 449-452, 789-792. 2004 [DOI]
[ACL334]Z. Zhang, Y.-H. Qi, D. Delagnes and G. Bernhart. Microstructures and properties of the tempered steel 55NiCrMoV7. Heat Treatment of Metals. 29(3)27-32. 2004
[ACL335]C.Y. Gao, P. Lours and G. Bernhart. Damages induced by thermomechanical cycles in superplastic forming tools. Key Engineering Materials. 274-276, 93-98. 2004 [DOI]
[ACL336]Z. Zhang, Y.-H. Qi, D. Delagnes and G. Bernhart. Time-Temperature-Hardness Kinetics Relation of Tempering Steels . transactions of materials and heat treatment. 25(1)41-45. 2004
[ACL337]Z. Zhang, D. Delagnes and G. Bernhart. Influence of Tempering Temperature on Cyclic Viscoplastic Behaviour of 55NiCrMoV7 Steel . transactions of materials and heat treatment. 25(5)623-626. 2004
[ACL338]S. Monteix, Y. Le Maoult, F. Schmidt and J.P. Arcens. Quantitative infrared thermography applied to blow moulding process : measurement of a heat transfer coefficient. Quantitative InfraRed Thermography. 1(2)133-150. 2004 [DOI]
[ACL339]K. Bavard, G. Bernhart and X. Zhang. High Temperature Low Cycle Fatigue of Spheroidal Graphite Cast Iron. International Journal of Cast Metals Research . 16(1-3)233-238. 2003
[ACL340]G. Saint-martin, F. Schmidt and P. Devos. Voids in short fibre-reinforced injection-moulded parts: density control vs. mass control . Polymer Testing. 22 (8)947-953. 2003 [DOI]
[ACL341]F. Schmidt, Y. Le Maoult and S. Monteix. Modelling of infrared heating of thermoplastic sheet used in thermoforming process . Journal of Materials Processing Technology. 143 , 225-231 . 2003 [DOI]
[ACL342]B. Castanié, J.-J. Barrau and J.-P. Jaouen. Theoretical and experimental analysis of asymmetric sandwich structures. Composite Structures. 55(3)295-306. 2002
[ACL343]E. Cailleux, T. Cutard and G. Bernhart. Pullout of metallic fibres in ceramic refractory composites. Composites Part - A: Applied Science and Manufacturing. 33, 1461-1466. 2002
[ACL344]S. Baleix, G. Bernhart and P. Lours. Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 327, 155-166. 2002
[ACL345]F. Deschaux-beaume, T. Cutard, N. Fréty and C. Levaillant. Oxidation of a Silicon Nitride-Titanium Nitride Composite : Microstructural Investigations and Phenomenological Modeling. Journal of the American Ceramic Society. 85(7)1860-1866. 2002
[ACL346]Z. Zhang, D. Delagnes and G. Bernhart. Anisothermal cyclic plasticity modelling of martensitic steels. International Journal of Fatigue. 24(6)635-648. 2002 [DOI]
[ACL347]F. Monies, J.-N. Felices, W. Rubio, J.-M. Redonnet and P. Lagarrigue. Five-axis NC milling of ruled surfaces: optimal geometry of a conical tool . International Journal of Production Research. 40(12)2901-2922. 2002
[ACL348]S. Baleix, S. Le Roux, G. Bernhart and P. Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Journal of Materials Processing Technology. 118(1-3)321-328. 2001 [DOI]
[ACL349]F. Lachaud, R. Piquet, F. Collombet and L. Surcin. Drilling of composites structures. Composite Structures. 52(3-4)551-566. 2001
[ACL350]S. Baleix, G. Bernhart and P. Lours. Investigation on the Spallation of Oxides Grown on Thermally Cycled Heat Resistant Cast Steels. Materials Science Forum. 539, 369-372. 2001
[ACL351]P. Lours, T. Cutard, G. Bernhart and C. Levaillant. Performances of metallic and ceramic tools for superplastic forming. International Journal of Materials and Product Technology. SPM1(2)445-452. 2001
[ACL352]P. Lours, S. Baleix and G. Bernhart. Investigation on the Damages of Superplastic Forming Tools. Journal of Materials Processing Technology. 117/3(G2). 2001
[ACL353]P. Lours, S. Le Roux and G. Bernhart. Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000. Journal of Advanced Materials. 34(2)11-20. 2001
[ACL354]J.-F. Ferrero, J.-J. Barrau, J.-M. Segura, B. Castanié and M. Sudre. Analytical theory for an approach calculation of non-balanced composite box beams. Thin-Walled Structures. 39(8)709-729. 2001 [DOI]
[ACL355]J.-F. Ferrero, J.-J. Barrau, J.-M. Segura, B. Castanié and M. Sudre. Torsion of thin-walled composite beams with midplane symetry. Composite Structures. 54(1)111-120. 2001
[ACL356]F. Deschaux-beaume, N. Fréty, T. Cutard and C. Colin. A phenomenological model for high temperature oxidation of Si3N4-TiN composites. Materials Science Forum. 372(1)403-410. 2001
[ACL357]M. Rachik, F. Schmidt and N. Reuge. Elastomer biaxial characterization using bubble inflation technique. II: Numerical investigation of some constitutive models . Polymer Engineering and Science. 41 (3)532-541 . 2001 [DOI]
[ACL358]N. Reuge, F. Schmidt and Y. Le Maoult. Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations . Polymer Engineering and Science. 41 (3)522-531. 2001 [DOI]
[ACL359]S. Monteix, F. Schmidt and Y. Le Maoult. Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating . Journal of Materials Processing Technology. 119( 1-3 ) 90-97. 2001 [DOI]
[ACL360]R. Beydon, G. Bernhart and Y. Segui. Measurement of metallic coatings adhesion to fibre reinforced plastic materials. Surface and Coatings Technology. 126(1)39-47. 2000
[ACL361]F. Schmidt, A. Rodriguez-villa and J.F. Agassant. Analytical models for the inflation of a polymeric tube . European Journal of Mechanics, A/Solids. 19 (1)89-104 . 2000 [DOI]
[ACL362]R. Piquet, B. Ferret, F. Lachaud and P. Swider. Experimental analysis of drilling damage in thin carbon/epoxy plates using special drills. . Composites Part - A: Applied Science and Manufacturing. 31, 1107-1115. 2000
[ACL363]F. Schmidt, P. Lafleur, F. Berthet and P. Devos. Numerical simulation of resin transfer molding using linear boundary element method. Polymer Composites. 20(6)725-732. 1999 [DOI]
[ACL364]G. Bernhart, G. Moulinier , O. Brucelle and D. Delagnes. High temperature low cycle fatigue behaviour of a martensitic forging tool steel. International Journal of Fatigue. 21(2)179-186. 1999 [DOI]
[ACL365]T. Cutard, E. Cailleux, P. Lours and G. Bernhart. structural and mechanical properties of refractory concrete for superplastic forming tools. Industrial Ceramics. 19(2)100. 1999
[ACL366]F. Deschaux-beaume, F. Schmidt, N. Fréty, T. Cutard, J.-C. Boyer and C. Levaillant. Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results. Journal of Materials Processing Technology. 92(93)502-507. 1999 [DOI]
[ACL367]T. Viatte, S. Bolognini, T. Cutard, G. Feusier, D. Mari and W. Benoit. Investigation into the potential of a composite combining toughness and plastic deformation resistance. International Journal of Refractory Metals and Hard Materials. 17(1-3)79-89. 1999
[ACL368]O. Brucelle and G. Bernhart. Methodology for service life increase of hot forging tools.. Journal of Materials Processing Technology. 87, 237-246. 1999
[ACL369]F. Lachaud, B. Lorrain, L. Michel and R. Barriol. Experimental and numerical study of delamination caused by local buckling of thermoplastic and thermoset composites. . Composites Science and Technology. 58(5)727-733. 1998
[ACL370]P. Lours, J. Alexis and G. Bernhart. Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C. Journal of Materials Science Letters. 17, 1089. 1998
[ACL371]F. Deschaux-beaume, F. Schmidt and N. Frety. Failure prediction for ceramic dies in the hot-forging process using FEM simulation . Journal of Materials Processing Technology. 75 (1-3)100-110 . 1998 [DOI]
[ACL372]F. Schmidt, J.F. Agassant and M. Bellet. Experimental study and numerical simulation of the injection stretch/blow molding process . Polymer Engineering and Science. 38 (9)1399-1412 . 1998 [DOI]
[ACL373]A. Ettouhami, A. Essaid, N. Ouakrim, L. Michel and M. Limouri. Thermal drifts of microelectronic capacitive pressure sensor. Journal De Physique, III. 7(7)1537-1548. 1997
[ACL374]F. Berthet, P. Devos and T. Ansart. R.T.M. conditions de mise en oeuvre : caractéristiques mécaniques des pièces. Composites. (21)76-81. 1997
[ACL375]M.-L. Bouchetou, T. Cutard, M. Huger and C. Gault. Elasticity of Si-C-O and C fibres at high temperature. Scripta Materialia. 37(7)1005-1010. 1997
[ACL376]J.-F. Ferrero and J.-J. Barrau. Study of dry friction under small displacements and near zero sliding velocity. Wear. 209, 322-327. 1997
[ACL377]F. Lachaud and L. Michel. Study of damage of thermoset and thermoplastic matrix carbon composites . Mécanique & Industries. 50(2)52-57. 1997
[ACL378]A. Malki, A. Gafsi, L. Michel, M. Labarrère and P. Lecoy. Impact and vibration detection in composite materials by using intermodal interference in multimode optical fibers. Applied Optics. 35(25)5198-5201. 1996
[ACL379]A. Ettouhami, A. Essaid, N. Ouakrim, L. Michel and M. Limouri. Thermal buckling of silicon capacitive pressure sensor. Sensors and Actuators, A: Physical. 57(3)161-171. 1996
[ACL380]F. Schmidt, J.F. Agassant and M. Bellet. Viscoelastic simulation of PET stretch/blow molding process . Journal of Non-Newtonian Fluid Mechanics. 64 (1)19-42. 1996 [DOI]
[ACL381]F. Berthet, P. Devos and T. Ansart. Comparaison du calcul à l'essai sur composites mis en oeuvre par injection sur renfort. Composites. (10)39-45. 1995
[ACL382]G. Navarre, B. Berton and G. Bernhart. Material Characterization in High Enthalpy Plasma Facilities. Journal of High Temperature Chemical Processes. 3, 273-284. 1994
[ACL383]M. Gomina, J.-L. Chermant, F. Osterstock, G. Bernhart and J. Mace. Applicability of fracture mechanics to fiber-reinforced CVD-Ceramic Composites. Fracture Mechanics of Ceramics. 7, 17-32 . 1986

Article de revue avec comité de lecture non répertorié

[ACLN1]S. Sassi, P. Marguerès, R. Le Begue, M. Mounkaila, P. Olivier and T. Camps. Détermination des paramètres géométriques pour la caractérisation électrique d’un composite T700/M21 en cours de cuisson. Matériaux et Techniques. 104(4)411,1-411,9. 2016 [DOI]
[ACLN2]F. Berthet, M. Boulanghien, G. Bernhart and Y. Soudais. Méthodes de détermination de la résistance en cisaillement à l’interface . Revue des Composites et des Materiaux Avances. 25(3-4)295-309. 2015 [DOI]
[ACLN3]F. Lachaud, R. Piquet, G. Aldebert , J. Huet and L. Michel. Analyse du comportement mécanique des assemblages boulonnés composites à renforts tissés. Revue des Composites et des Materiaux Avances. 24(4)449-464. 2014
[ACLN4]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Determination of the elastic properties in CFRP composites : comparison of different approaches based on tensile tests and ultrasonic characterization. Advances in Aircraft and Spacecraft Science. , . 2014
[ACLN5]R. Piquet, F. Lachaud, S. Catche and B. Castanié. Tolérance aux dommages de perçages dans les assemblages boulonnés composites. Revue des Composites et des Materiaux Avances. 24(4)481-493. 2014
[ACLN6]R. Zitoune, S. Almabouacif, F. Collombet and H. Bouguerara. Optimization of twist drill geometry for drilling CFRP and multi-material made of CFRP/Al. International Journal of Materials, Mechanics and Manufacturing. 2(4). 2014 [DOI]
[ACLN7]P. Marguerès, T. Camps and P. Olivier. Impédancemétrie électrique pour le monitoring de composites carbone/époxy. Revue des Composites et des Materiaux Avances. 24(2)207-220. 2014 [DOI]
[ACLN8]L. Peng, X. Gong and L. Guillaumat. Modélisation numérique de structures composites réparées par collage de patchs externes en traction . Revue des Composites et des Materiaux Avances. 24(4/2014)465-479. 2014 [DOI]
[ACLN9]A.-C. Akue Asseko, B. Cosson, F. Schmidt, R. Gilblas, Y. Le Maoult and E. Lafranche. Thermal modeling in composite transmission laser welding process: light scattering and absorption phenomena coupling . Key Engineering Materials. 611-612, 1560-1567. 2014 [DOI]
[ACLN10]F. Collombet, L. Crouzeix, F. Cénac, Y.-H. Grunevald, Y. Davila, A. Cerisier and B. Douchin. Usinage par jet d’eau abrasif pour la réparation de pièces composites primaires aéronautiques. Revue des Composites et des Materiaux Avances. 23(3)459-482. 2013 [DOI]
[ACLN11]J. Vignes, F. Schmidt, G. Dusserre and J.F. Dalmasso. Effect of moisture on the behaviour of an extruded clay paste. Key Engineering Materials. 554-557, 2230-2236. 2013 [DOI]
[ACLN12]A. El Bakali , O. De Almeida, J. Bikard, M. Villiere, F. Schmidt, Y. Le Maoult and M. Dauphin. Simulation of IR heating for composite stamping. Key Engineering Materials. 554-557, 1523-1529. 2013 [DOI]
[ACLN13]S. Nakouzi, F. Berthet, Y. Le Maoult and F. Schmidt. Simulations of an Infrared Composite Curing Process. Key Engineering Materials. 554-557, 1517-1522. 2013 [DOI]
[ACLN14]G. Bernhart, J.-P. Arcens and Y. Le Maoult. Innovative Superplastic Forming Based on In-Situ Infra-Red Sheet Heating . Materials Science Forum. 735, 415-421. 2013
[ACLN15]R. Zitoune, N. Cadorin, B. Castanié and M. Sève. Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage. Revue des Composites et des Materiaux Avances. 23(3)387-404. 2013
[ACLN16]K. Vijayan, R. Zitoune and F. Collombet. Study of Drilling of Multi-Material (CFRP/Al) using Taguchi and Statistical Techniques. Journal of Materials Science. (2)95-109. 2012
[ACLN17]E. Peronnet, F. Eyma, H. Welemane and S. Mistou. Characterization and comparison of defects detection limits of ultrasonic non destructive methods. Key Engineering Materials. 498, 79-88. 2012 [DOI]
[ACLN18]J. Vignes , F. Schmidt, G. Dusserre, O. De Almeida and J.-F. Dalmasso. Numerical simulations of clay tiles compression. Key Engineering Materials. 504-506 , 1403-1408. 2012 [DOI]
[ACLN19]D. Lecointe, M. Villière, S. Nakousi, V. Sobotka, N. Boyard, F. Schmidt and D. Delaunay. Experimental determination and modeling of thermal conductivity tensor of carbon/epoxy composite. Key Engineering Materials. 504-506 , 1091-1096. 2012 [DOI]
[ACLN20]F. Schmidt, S. Nakouzi, Y. Le Maoult, F. Berthet, D. Delaunay and V. Sobotka. Optimization of the incident IR heat flux upon a 3D geometry,composite part (Carbon/Epoxy). Key Engineering Materials. 504-506, 1085-1090. 2012 [DOI]
[ACLN21]C. Paris, G. Bernhart, P. Olivier and O. De Almeida. Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques . Matériaux et Techniques. 100(6-7)611-622 . 2012 [DOI]
[ACLN22]E. Péronnet, F. Eyma, M.-L. Pastor and H. Welemane. Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. Contrôles-Essais-Mesures. 37, 65-70. 2011
[ACLN23]R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc and F. Schmidt. BEM Simulation Of 3D Updated Resin Front For LCM Processes. Key Engineering Materials. 446, 131-136. 2010 [DOI]
[ACLN24]F. Nazaret, T. Cutard and O. Barrau. Sizing of refractory castable gas-burner using thermomechanical simulations. Advances in Science and Technology. 70, 173-178. 2010
[ACLN25]T. Cutard, N. Donval, A. Mazzoni, C. Michel and F. Nazaret. Thermomechanical characterization of monolithic refractory castables. Advances in Science and Technology. 70(37-46). 2010
[ACLN26]V. Velay, G. Bernhart, A. Martinier and J.-Y. Moraux. High Temperature Fatigue of SPF Die Ni-Cr-Fe Heat Resistant Nickel-Chromium Cast Steels. Key Engineering Materials. 433, 69-76. 2010 [DOI]
[ACLN27]G. Bernhart, V. Velay and P. Lours. Heat resistant Ni-Cr-Fe steels for superplastic forming dies : from material microstructure to die design. Key Engineering Materials. 433, 77-84. 2010 [DOI]
[ACLN28]K. Vijayan, R. Zitoune and F. Collombet. Comprehensive Review on Drilling of Multimaterials Stacks. Journal of Machining and Forming Technologies. 2(3/4) 171-200. 2010
[ACLN29]A. Njionhou, F. Berthet and B. Castanié. Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication. Matériaux et Techniques. 98(2)151-163. 2010 [DOI]
[ACLN30]F. Berthet. Comparaison des cinétiques de réaction de la résine RTM6 à l’aide des diagrammes TTT. Revue des Composites et des Materiaux Avances. 20(1)25-40. 2010
[ACLN31]T. Kagnaya, C. Boher, M. Lazard, L. Lambert and T. Cutard. Friction at high sliding speed of WC-6Co pin versus steel disc AISI 1045 : estimation of the contact temperature. International Journal of Multiphysics. 3(141-145). 2009
[ACLN32]S. Chevalier, J.-N. Felices and W. Rubio. Modelling the Surface Generated by a Cutting Tool in Wooden Workpieces. Journal of Manufacturing Technology Research. 1, 117-136. 2009
[ACLN33]M. Guichon, C. Boher, B. Hassoune-rhabbour, F. Schmidt and Y. Baziard. Identification des contraintes de rupture et de cisaillement à l'interface polymère injecté-moule métallique à l'aide du test couronne. Matériaux et Techniques. 96(1-2)65-78. 2008 [DOI]
[ACLN34]Z. Ahmer, V. Velay, G. Bernhart and F. Rezai-aria. Cyclic behaviour simulation of X38CrMoV5-47HRc (AISI H11) tempered martensitic hot-work tool steel. International Journal of Microstructure and Materials Properties. 3(2/3)326-335. 2008 [DOI]
[ACLN35]V. Velay, D. Delagnes and G. Bernhart. Advances in cyclic behavior and lifetime modelling of tempered martensitic steels based on microstructural considerations. Key Engineering Materials. 378-379, 81-100. 2008 [DOI] [HAL]
[ACLN36]V. Velay, G. Bernhart and D. Delagnes. Identification and validation of a continuum damage model applied for the lifetime prediction of H11 tool steel. International Journal of Microstructure and Materials Properties. 3(2-3)282-296. 2008 [DOI]
[ACLN37]F. Berthet. Calcul et expériences sur le profil du front de résine en infusion. Revue des Composites et des Materiaux Avances. 18(3). 2008
[ACLN38]S. Hmida-maamar, F. Schmidt, L. Robert, V. Velay and D. Mercier. Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage. Matériaux et Techniques. 94(5)371-378. 2006 [DOI]
[ACLN39]M. Mulle, F. Collombet, B. Trarieux, J.-N. Périé and Y.-H. Grunevald. Démonstrateur technologique multi-instrumenté (réseaux de Bragg et mesure de champs). Vers un dialogue essais/calculs multi-échelle. Revue des Composites et des Materiaux Avances. 15(1)33-51. 2005 [DOI]
[ACLN40]R. Zitoune and F. Collombet. Comparaison expérience Calcul numérique des endommagements induits par perçage de structures composites fibres longues en Carbone/Epoxy. Revue des Composites et des Materiaux Avances. 15(1)105-125. 2005
[ACLN41]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI avec le matériau HexFITTM. Revue des Composites et des Materiaux Avances. 15(3)401-412. 2005 [DOI]
[ACLN42]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Caractérisation de l’état initial de tubes composites : maîtrise du placement des renforts et suivi de la cuisson par fibres optiques à réseaux de bragg. Revue des Composites et des Materiaux Avances. 15(2)245-261. 2005 [DOI]
[ACLN43]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.H. Grunevald. Mesures de champs par stéréocorrélation sur éprouvettes technologiques composites instrumentées par capteurs à fibre optique à réseaux de Bragg : comparaison et validation des mesures. Instrumentation Mesure Metrologie. 4(3-4)167-192. 2004
[ACLN44]B. Douchin and P. Ladevèze. Mise en œuvre numérique d’un mésomodèle d’endommagement des stratifiés. Revue Européenne Des Eléments Finis. 10(2-3-4)473-487. 2001
[ACLN45]B. Castanié, J.-J. Barrau, J.-F. Ferrero and J.-P. Jaouen. Analyse non linéaire et structurale des poutres sandwichs dissymétriques. Revue des Composites et des Materiaux Avances. 10(2). 2000
[ACLN46]F. Berthet, P. Devos, F. Schmidt and T. Ansart. Influence des paramètres du procédé et de constitution sur le comportement sous impact et à la résistance en compression après impact. Revue des Composites et des Materiaux Avances. 8, 25-52. 1998
[ACLN47]F. Lachaud, N. Khemiri and L. Michel. Modélisation de l'endommagement de stratifiés croisés: application aux stratifiés T300/914 et AS4/PEEK. Revue des Composites et des Materiaux Avances. , . 1997
[ACLN48]C. Espinosa and F. Collombet. Impact de plaques composites : caractérisation et modèles. Journal De Physique, III. 1, 1953-1968. 1991 [DOI]

Articles dans des revues sans comité de lecture

[ASCL1]L. Michel, S. Garcia, Y. Chen, C. Espinosa and F. Lachaud. Experimental and Numerical Investigation of Delamination in Curved-Beam Multidirectional Laminated Composite Specimen. Key Engineering Materials. 577-578, 389-392. 2014
[ASCL2]C. Espinosa, B. Kobyé, L. Michel and F. Lachaud. Numerical prediction of damage interaction during L-Shaped laminated composite structures unfolding. Key Engineering Materials. 577-578, 461-464. 2014
[ASCL3]C. Espinosa, M. Ruiz-ayuso and F. Lachaud. Inner Damage and External Dent in Composite Structures after Impact – Part I: Experimental Observations. Key Engineering Materials. 577-578, 457-460. 2014
[ASCL4]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures. Nonconventional technologies review. XVII(4). 2013
[ASCL5]M. Ilyas, C. Espinosa, F. Lachaud, L. Michel and M. Salaün. Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. Key Engineering Materials. 452-453, 369-372. 2011 [DOI] [OATAO]
[ASCL6]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Flambement de Structures composites stabilisées par une mousse. Revue scientifique et technique de la Défense. , . 2003

Communication invitée dans un congrès national ou international

[INV1]B. Castanié. Discrete modeling strategies for aeronautic composite structures: from failure scenario to certification. International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017 Invited plenary lecture 2017
[INV2]C. Bouvet. Evaluation of fracture toughness in composite structures using Infrared Thermography. International Conference on Mechanics of Composites Invited keynote lecture 2017
[INV3]T. Ramananantoandro, M.F. Ramanakoto, H.A. Rajemison and F. Eyma. Relationship between density and aesthetic attributes of wood and preference of consumers. 67th FPS and 56th SWST International Conventions, Austin, Texas Invited lecture 2013
[INV4]G. Bernhart, F. Nazaret and T. Cutard. Low cost refractory castable die development for titanium sheet superplastic forming. COBEF 2013 , 7th Brasilian congress on manufacturing engineering Invited plenary lecture 2013
[INV5]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, T. Geernaert, S. Sulejmani, S. Eve, M. Gomina, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Embedded fiber Bragg gratings in photonic crystal fiber for cure cycle monitoring of carbon fiber-reinforced polymer materials. Proc. SPIE 8775, Micro-structured and Specialty Optical Fibres II. Prague, Czech Republic, April 15, 2013 Invited lecture 2013 [DOI]
[INV6]F. Collombet, L. Crouzeix, Y.-H. Grunevald, B. Douchin, Y. Davila, M. Torres and H. Zeng. Large repair for aeronautics’ primary principal composite structures. International Symposium on Aircraft Materials ACMA 2012, Fez (Morocco). Invited plenary lecture 2012
[INV7]C. Bouvet. Dommage d’impact sur stratifié composite. JNC 17, Poitiers (France), 15-17 juin Invited lecture 2011
[INV8]B. Castanié. Recent advances on aeronautique structures. International Conference on Mechanical, Automotive and Aerospace Engineering 2011,ICMAAE '11, Kuala-Lumpur, May 17-19, 2011. Invited plenary lecture 2011
[INV9]C. Bouvet, S. Rivallant and J.-J. Barrau. Endommagement de stratifiés composites sous impact basse vitesse et indentation permanente. Mecamat, Aussois (France), 24-28 janvier Invited lecture 2011
[INV10]T. Cutard, A. Mazzoni, N. Donval, C. Michel and F. Nazaret. Thermo mechanical characterisation of monolithic castables. CIMTEC 2010 - Symposium "Refractories : recent developments in Materials, Production and Use" - Grosseto (Italy) Invited keynote lecture 2010
[INV11]G. Bernhart and T. Cutard. Ceramic Die technology for Superplastic Forming : state of the art and recent improvements. Proceedings of RCS symposium ”Superplasticity and its Related Areas”, Ibaraki University, Japan Invited plenary lecture p.76-85 2010
[INV12]G. Bernhart, V. Velay and P. Lours. Heat Resistant Ni-Cr-Fe Steels for Superplastic Forming Dies : from material microstructure to die design. ICSAM 2009, 10th International Conference on Superplasticity in Advanced materials, Seattle, USA Invited plenary lecture 2009
[INV13]F. Nazaret, O. Barrau, G. Bernhart and T. Cutard. Innovative SPF toolings based on reinforced refractory concretes. ICSAM2009 – International Conference on Superplasticity in Advanced Materials (Seattle) Invited lecture 2009
[INV14]F. Collombet, M. Mulle, H. Hernandez-moreno, R. Zitoune, B. Douchin and Y.-H. Grunevald. Benefit from embedded sensors to study polymeric composite structures. Proceedings of AIQ-ICF2008 – The first African InterQuadrennial ICF conference, Alger (Algeria). Invited lecture p.485-496 2008 [DOI]
[INV15]S. Roux, L. Crouzeix, J.-N. Périé and F. Hild. On the use of (static) digital image correlation for identifying material heterogeneities and non linear behaviors, 2-6 juin, 2008. Réunion annuelle du Groupement Européen, Ultra-Sound propagation studies for CND applications, Anglet (France) Invited lecture 2008
[INV16]T. Cutard. Study of refractory concretes at high temperature: microstructural evolutions and mechanical behaviour. ECERS2007 - 10th International Conference of the European Ceramic Society (Berlin) Invited keynote lecture 2007
[INV17]T. Cutard, E. Cailleux, F. Nazaret and G. Bernhart. Metallic fiber reinforced refractory concretes. Advances in Refractories for the Metallurgical Industries IV, COM2004 – Hamilton (Canada) Invited keynote lecture 2004
[INV18]P. Lours, H.V. bui, A. Nafi, O. Mercier and G. Bernhart. Rapid tooling for injection moulding process . ISAEM 2003 - PROCEEDINGS INTERNATIONAL SYMPOSIUM ON ADVANCED ENGINEERING MATERIALS , JEJU, KOREA, NOVEMBER 2003 published in ”Materials Science Forum” Invited lecture 2003
[INV19]F. Collombet, B. Douchin, P. Davies and F. Malaise. Loading rate effects on multiscale materials and structures. some experimental, theoretical and numerical problems. Proceedings of IASS Symposium on Lightweight Structures in Civil Engineering, Warsaw (Poland) Invited lecture p.697-706 2002
[INV20]P. Lours, T. Cutard, G. Bernhart and C. Levaillant. Performances of metallic and ceramic tools for superplastic forming tools . ISAEM 2000 - PROCEEDINGS INTERNATIONAL SYMPOSIUM ON ADVANCED ENGINEERING MATERIALS , GUILIN, PEOPLE REPUBLIC OF CHINA, OCTOBER 2000, SPM1, 2, 445, 2001 ”Special Issue: Int Journal of Materi Invited lecture 2001
[INV21]P. Lours, S. Baleix and G. Bernhart. Investigation on the damages of superplastic forming tools. THERMEC 2000 - PROCEEDINGS INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, LAS VEGAS, USA, DECEMBER 2000 Invited lecture 2000

Communication avec actes dans un congrès international ou national

[ACT1]C. Espinosa, H. Bhoosnurmath, A. Carcel Lopez and F. Lachaud. Numerical Modelling of a Lightning Strike on a Protected Composite Panel. Proceedings of ICOLSE 2017 International Conference on Lightning and Static Electricity, 13-15 sept. 2017, Nagoya (J) 2017
[ACT2]J. Gulla, A. Cantarel, M.-L. Pastor and X. Gong. One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact. Proceedings of ICCS20 2017
[ACT3]C. Espinosa, T. Montel, J.F. Montes Pons, F. Lachaud and F. Soulas. A numerical study of the pressure applied on CFRP panels during a lightning strike using a coupled electro-thermal-mechanical model. Proceedings of ICOLSE 2017 International Conference on Lightning and Static Electricity, 13-15 sept. 2017, Nagoya (J) 2017
[ACT4]J. Huang, M.-L. Pastor, C. Garnier, X. Gong and D. Li. A new fatigue life prediction model based on infrared thermography and degradation process for CFRP composite laminate. Proceedings of ICCS20 2017
[ACT5]J.D.D. Rodriguez Ramirez, C. Bouvet and B. Castanié. Shear testing of honeycomb cores for inserts. Proceedings of International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017 2017
[ACT6]H. Li, M. Perrin, F. Eyma, X. Jacob and V. Gibiat. Moisture content monitoring in glulam structures by embedded sensors. Proceedings of 4th International conference on structural health assessment of timber structures p.349-360 2017
[ACT7]I. Yahyaoui, M. Perrin, X. Gong and H. Li. Damage evolution in wood under tensile loading monitored by acoustic emission. Proceedings of 4th International conference on structural health assessment of timber structures p.301-312 2017
[ACT8]S. Corveleyn, F. Berthet, F. Lachaud and C. Rossignol. LONG TERM CREEP BEHAVIOR OF A SHORT CARBON FIBER REINFORCED PEEK AT HIGH TEMPERATURE. Proceedings of ICCM21 2017
[ACT9]J.D.D. Rodriguez Ramirez, B. Castanié and C. Bouvet. Analysis of nonlinear behavior on honeycomb cores. Proceedings of ICCM 21 International Conference on Composite Materials 21, Xi'an, 21-25 august 2017
[ACT10]J. Serra, J.-E. Piérré, J.-C. Passieux, J.-N. Périé, C. Bouvet, B. Castanié and C. Petiot. The VERTEX program: complex loading and validation of aeronautic composite structures. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25 2017
[ACT11]J. Serra, C. Bouvet, B. Castanié and C. Petiot. DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017 2017
[ACT12]F. Neveu, B. Castanié and P. Olivier. A NEW PRE-DESIGN METHODOLOGY FOR INNOVATIVE COMPOSITE STRUCTURES. Proceedings of International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017 2017
[ACT13]J. Huang, M.-L. Pastor, C. Garnier and X. Gong. RAPID DETERMINATION OF FATIGUE LIMITS OF COMPOSITES BY LUONG’S METHOD AND ITS IMPROVEMENT. Proceedings of ICCM21 2017
[ACT14]I. Yahyaoui, M. Perrin and X. Gong. The Potential of Acoustic Emission for Timber Damage Assessment. Proceedings of 3rd International Conference on Timber Bridges, Skeffeltea, Suède, 26-29 juin 2017 p.354-363 2017
[ACT15]S. Rivallant, A. Gonzalez, F. Tostain and C. Espinosa. Study of debris generated during the crushing of CFRP laminates. Proceedings of AMAC 20èmes Journées Nationales sur les Composites (JNC20), EPCPT, 23-30 June 2017, Paris (FR) 2017
[ACT16]C. Vicard, O. De Almeida, A. Cantarel and G. Bernhart. Diagramme TTT de la polymérisation anionique du PA6 à partir de l’ε-caprolactame. Proceedings of JNC 20 2017
[ACT17]F. Neveu, B. Castanié and P. Olivier. Nouvelle méthodologie de conception pour les structures composites. Proceedings of Journées nationales sur les Composites (JNC 20), Paris, 28-30 Juin 2017 2017
[ACT18]S.A. Chelaghma, O. De Almeida, J.-N. Périé, P. Marguerès, B. Reine, A. Vinet and J.-C. Passieux. Etude de la morphologie cristalline et modélisation de la cinétique du PEKK (Poly-Ether- Cétone-Cétone). Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-4 2017
[ACT19]S. Corveleyn, F. Berthet, F. Lachaud and C. Rossignol . Evolution de la structure d’un composite PEEK renforcé de fibres de carbone courtes après vieillissement sous air . Proceedings of JNC20 2017
[ACT20]J. Serra, J.E. Pierré, J.N. Périé, J.C. Passieux, C. Bouvet and B. Castanié. Modélisation d’essais structuraux sur plaques entaillées. Proceedings of Journées Nationales sur les Composites - JNC 20 p.1-9 2017
[ACT21]H. Li, M. Perrin, F. Eyma, X. Jacob and V. Gibiat. Moisture Content Monitoring in Glulam by Electrical Methods. Proceedings of 3rd International Conference on Timber Bridges 2017- Skellefteå, Suède, 29-29 juin 2017 p.80-89 2017
[ACT22]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Etude expérimentale et numérique de la propagation de coupure dans des stratifiés composites soumis à de la traction simple. Proceedings of CSMA 2017, 13ème Colloque National en Calcul des Structures 15-19 mai 2017, Presqu’île de Giens (Var) 2017
[ACT23]J. Serra, J.E. Pierré, J.-N. Périé, J.-C. Passieux, C. Bouvet and B. Castanié. Sur le dialogue essais-calcul dans les essais structuraux complexes. Proceedings of 13e colloque national en calcul des structures - CSMA 2017 p.1-7 2017
[ACT24]G. Androuin, I. Maillet, L. Michel and X. Gong. Mode II delamination propagation at high frequencies. Proceedings of 36e Journées de Printemps, SF2M 2017
[ACT25]L. Barrière, O. Cherrier, J.-C. Passieux, M. Bouquet and J.-F. Ferrero. 3D Digital Image Correlation applied to birdstrike tests. Proceedings of iDICs 2016 Conference and Workshop SEM Fall Conference, Philadelphia, PA, USA p.17-20 2017 [DOI] [HAL]
[ACT26]S. Chelaghma, O. De Almeida, P. Marguerès, J.-C. Passieux, J.-N. Périé, B. Reine and A. Vinet. Edude de la morphologie cristalline du PEKK et caractérisation de la cinétique de cristallisation des composites à matrice PEKK.. Proceedings of JST AMAC - Mise en OEuvre des Composites à Matrice Thermoplastique 2017
[ACT27]S. Jlassi, F. Berthet, S. Corveleyn, M. Boulanghien and G. Bernhart. Caractérisation de la résistance en cisaillement interfaciale des composites thermoplastiques polyamide66/fibres de carbone recyclées. Proceedings of JNC20: journées nationales des composites 20 2017
[ACT28]G. Androuin, L. Michel, I. Maillet and X. Gong. Effet de l’historique de chargement en fatigue pour la prédiction de la propagation de délaminage en mode I. Proceedings of Journées Nationales sur les Composites 2017 2017
[ACT29]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage d'un CMC oxyde/oxyde. Proceedings of JNC20 2017
[ACT30]L. Zemni, G. Dusserre, G. Bernhart and B. Boniface. A STUDY OF CROSS-LINKING KINETICS OF CYANATE ESTER RESIN. Proceedings of ICCM21 (International Conference on Composite Materials) 2017
[ACT31]S. Boztepe, R. Gilblas, O. De Almeida, F. Schmidt and Y. Le Maoult. The role of microcrystalline structure on the temperature-dependent thermo-optical properties of semi-crystalline thermoplastics and non-invasive temperature measurements . Proceedings of 25ème Congrès Français de Thermique (SFT) 2017 [DOI]
[ACT32]S. Boztepe, R. Gilblas, O. De Almeida, Y. Le Maoult and F. Schmidt. A non-invasive experimental approach for surface temperature measurements on semi-crystalline thermoplastics . Proceedings of 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING 2017 [DOI]
[ACT33]T. Baumard, G. Menary, O. De Almeida, F. Schmidt, P. Martin and J. Bikard. Towards a Coupled Heating-Forming Simulation of the Thermoforming of Thermoplastic Composites. Proceedings of 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING 2017 [DOI]
[ACT34]M. Al Rafii, F. Lachaud and R. Piquet. Tolérances aux dommages d'impacts sur des assemblages boulonnées composites stratifiés en carbone/époxy . Proceedings of Journées Annuelles SF2M - 25-27 Octobre - Albi 2016
[ACT35]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage de composites à matrice céramique oxyde/oxyde. Proceedings of Journées Annuelles SF2M - 25-27 Octobre - Albi 2016
[ACT36]S. Corveleyn, F. Berthet, F. Lachaud and C. Rossignol . Influence du vieillissement thermique sous air sur les propriétés mécaniques d'un composite à matrice PEEK renforcée de fibres de carbone courtes. Proceedings of Journées Annuelles SF2M 2016
[ACT37]O. Quénard, O. Dorival, P. Guy, A. Votié and K. Brethome. Measurement of fracture toughness of metallic materials produced by additive manufacturing. Proceedings of 14th European Conference on Spacecraft Structures Materials and Environmental Testing (ECSSMET 2016) 2016
[ACT38]B. Castanié. Safety failure envelops to validate composite structure . Proceedings of Proceedings of ICCS19 19th International Conference on Composite Structures 2016
[ACT39]J.D.D. Rodriguez Ramirez, B. Castanié, C. Bouvet, M. Deloubes and G. J.-P.. Enhanced nonlinear insert model. Proceedings of ICCS19 19th International Conference on Composite Structures, Porto, 5-9 september 2016
[ACT40]S. Arki, S. Marguet, J.-M. Redonnet, J.-F. Ferrero, P. Navarro and A. Aury. Semi-continous approach for the modelling of complex shaped thick composite parts. Proceedings of 2nd International conference on mechanics of composites p.176 2016 [DOI]
[ACT41]B. Castanié. COMPOSITE STRUCTURES IN AERONAUTICS: PAST, PRESENT AND FUTURE. Proceedings of The 5th Burapha University International Conference 2016, July 28-29, Pattaya, Thailand, 2016
[ACT42]C. Espinosa, F. Tostain and S. Rivallant. Stabilization of the numerical priming to stabilization phenomenon in the crushing of a composite panel using local and diffuse damage laws. Proceedings of VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) 2016
[ACT43]M. Barus, H. Welemane, F. Collombet, M.-L. Pastor, A. Cantarel, V. Nassiet, L. Crouzeix and Y.-H. Grunevald. A new NDT method for the study of composite bonded repair. Proceedings of 17th European Conference on Composite Materials (ECCM17) 2016
[ACT44]S. Corveleyn, F. Berthet and F. Lachaud. Improvement of tensile strength of weld lines of a short carbon fiber reinforced PEEK using different overflow tabs configurations. Proceedings of STEPI 10 - Polyimides & High Performance Polymers - Montpellier 2016 2016
[ACT45]G. Androuin, L. Michel, X. Gong and I. Maillet. Investigation of composites vibration fatigue behaviour: high frequency mode II delamination propagation. Proceedings of ECCM17 - 17th European Conference on Composite Materials - Munich - Juin 2016 2016
[ACT46]S. Braiek , R. Zitoune, A. Ben Khalifa and M. Zidi . Experimental and numerical study of adhesively bonded tubular specimens under uniaxial loading . Proceedings of Proceedings of Proceedings of 17th european conference on composites materials. Munich 2016 2016
[ACT47]J. Saoudi, R. Zitoune, S. Gururaja , S. Mezlini and P. Seitier . Analytical model of critical thrust force for exi-ply delamination during drilling: thermo-mechanical analysis . Proceedings of Proceedings of 17th european conference on composites materials. Munich 2016
[ACT48]A. Hajjaji, R. Zitoune, L. Crouzeix, F. Collombet and S. Le Roux. Impact of the abrasive water jet milling process on the damage and surface characteristics of CFRP composite.. Proceedings of 17th european conference on composites materials. Munich 2016
[ACT49]Y. Ge, X. Gong, E. De Luycker and A. Hurez. Characterization of pure mode I, II and III delamination of laminated composite by using Edge Ring Crack specimen. Proceedings of Proceedings of 17th European Conference on Composite Materials (ECCM17) p.1-10 2016
[ACT50]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Scaling effect in notched composites: The Discrete Ply Model approach. Proceedings of 17th European Conference on Composite Materials, Munich (ECCM 2016) 2016
[ACT51]J. Patou, E. De Luycker and G. Bernhart. INFLUENCE OF VOID CONTENT ON THE MECHANICAL PROPERTIES OF CARBON/PPS LAMINATES. Proceedings of 17th European Conference on Composite Materials (ECCM17) p.1-7 2016
[ACT52]C. Rouzaud, F. Gatuingt, G. Hervé, O. Dorival and N. Moussalam. Application of the variational theory of complex rays to the determination of shock induced vibration of a reinforced concrete structure. Proceedings of SUSI 2016, 14th international conference on structures under shock and impact 2016
[ACT53]A. Wilhelm, S. Rivallant and J.-F. Ferrero. Parametric study of a sandwich structure under soft impact. Proceedings of ICILSM 2016 - 1st International Conference on Impact Loading of Structures and Materials, Turin, Italie, 22-26 May 2016
[ACT54]F. Tostain, P. Guillén Ulecia, L. Fúster Alfonso, S. Rivallant and C. Espinosa. Experimental investigation of crushed composite plates under static and dynamic loads. Proceedings of ICILSM 2016 - 1st International Conference on Impact Loading of Structures and Materials, Turin, Italie, 22-26 May 2016
[ACT55]J.P. Susainathan, F. Eyma, E. De Luycker, A. Cantarel and B. Castanié. Experimental investigation on impact behaviour of wood-based sandwich structures. Proceedings of Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016) 2016
[ACT56]A.C. Akué Asseko, E. Lafranche, B. Cosson, F. Schmidt and Y. Le Maoult. Infrared welding process on composite: Effect of interdiffusion at the welding interface. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT57]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT58]T. Baumard, O. De Almeida, G. Menary, Y. Le Maoult, F. Schmidt and J. Bikard. Determination of Thermal Contact Conductance in Vacuum-Bagged Thermoplastic Prepreg Stacks Using Infrared Thermography. Proceedings of 19th Esaform conference 2016 [DOI]
[ACT59]A. Wilhelm, S. Rivallant and J.-F. Ferrero. Parametric study of the behavior of a sandwich under bird impact for shield design applications. Proceedings of 11th International Conference on Sandwich Structures, Miami, USA, 20-22 March 2016
[ACT60]J.P. Susainathan, F. Eyma, E. De Luycker, A. Cantarel and B. Castanié. IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT61]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarinni. POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT62]L. Bernard, B. Castanié and G. Michon. Dynamic bending-twisting coupling of an horizontally graded CFRP sandwich beam. Proceedings of 11th International Conference on Sandwich Structures ICSS-11 2016
[ACT63]B. Vales, S. Marguet, R. Créac'hcadec, L. Sohier, J.-F. Ferrero and P. Navarro. Numerical & Experimental Study of a Modified Arcan Device in Dynamic: Application to Bonded Joints. Proceedings of Euradh 2016, the 11th European Adhesion Conference and Adhesion '16, the 13th International Conference on the Science and Technology of Adhesion and Adhesives 2016
[ACT64]T. Baumard, O. De Almeida, G. Menary, F. Schmidt, P. Martin and J. Bikard. Coupled Heating- Forming Simulation of the Thermoforming of Thermoplastic Composites. Proceedings of ITHEC 2016, 3rd International Conference & Exhibition on Thermoplastic Composites p.20-23 2016
[ACT65]A. Hamdi, F. Neveu, A. Daidié and P. Stephan. Développement d’outils pour la conception préliminaire des assemblages métalliques. Proceedings of Conférence Internationale de Construction Métallique et Mixte CICOMM’2015, Tlemcen, Algérie 2015
[ACT66]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit, Y. Duval and I. Revel. Approximation of a lightning test by a mechanical impact one : from equivalence criterion based on deflection to mechanical modelling of core damage and delamination. Proceedings of 2015 International Conference on Lightning and Static Electricity (ICOLSE) 2015
[ACT67]F. Tostain, C. Espinosa and S. Rivallant. Crushing of aeronautical composite absorbers using canonical and phenomenological ruin criteria. Proceedings of V ECCOMAS Thematic Conference on the Mechanical Response of Composites, Bristol, UK, 7-9 September 2015
[ACT68]F. Soulas, B. Lepetit, C. Espinosa, F. Lachaud, S. Guinard, J. Duval and I. Revel. How to define a mechanical impact equivalent to a lightning strike. Proceedings of 2015 International Conference on Lightning and Static Electricity (ICOLSE) 2015
[ACT69]B. Vales, S. Marguet, R. Créach'cadec, L. Sohier, J.-F. Ferrero and P. Navarro. Numerical Study of an Arcan Tensile Compression Shear Test in Dynamic: Application to Bonded Joints. Proceedings of Complas XIII, the 13th International Conference on Computational Plasticity 2015
[ACT70]A. Wilhelm, J.-F. Ferrero and S. Rivallant. Etude paramétrique d’un bouclier sandwich sous impact mou. Proceedings of Congrès Français de Mécanique 2015, Lyon, France, 24-28 Août 2015
[ACT71]V. Achard, C. Bouvet and B. Castanié. Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone. Proceedings of 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015 2015
[ACT72]B. Castanié, A. Daidié, C. Bouvet, V. Achard and L. Adam. Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées.. Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France 2015
[ACT73]B. Castanié, J.D.D. Rodriguez Ramirez, C. Bouvet and J.-P. Giavarini. Calcul des inserts de structures sandwichs : état de l'art et perspectives. . Proceedings of Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen 2015
[ACT74]C. Sola, L. Michel, F. Lachaud, B. Castanié, A. Delabie and E. Mermoz . Comportement en matage de stratifiés quasi-isotropes à renforts tissés ou quasi-UD.. Proceedings of JNC 19, Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet2013 2015 2015
[ACT75]L. Bernard, G. Michon, B. Castanié, R. El Fatmi, V. Negre and D. Reveillon. Analyse Dynamique et Statique du Couplage Flexion-Torsion d’une Poutre Sandwich. Proceedings of JNC 19, Journées Nationales sur les Composites, Lyon, France 2015
[ACT76]L. Chevallier, Q. Govignon, P. Olivier, G. Bernhart and M. Mayne L'hermite. MECHANICAL EFFECTS OF THE INJECTION-CVD NANOSTRUCTURATION OF CARBON-FIBRE COMPOSITES INVESTIGATED BY BUNDLE TENSILE TEST AND DMA. Proceedings of ICCM20 (20th International Conference on Composite Materials) 2015
[ACT77]M. Barus, F. Collombet, H. Welemane, L. Crouzeix, A. Cantarel, Y.-H. Grunevald, V. Nassiet and M.-L. Pastor. Infrared signatures of bonded interfaces for the repair of primary structures in composite materials. Proceedings of 20th International Conference on Composite Materials 2015 [OATAO]
[ACT78]Y. Ge, X. Gong, A. Hurez, E. De Luycker and L. Peng. Test en mode III pur du type ERCT (Edge Ring Crack Torsion) . Proceedings of 20th International Conference on Composite Materials 2015 (ICCM-20) p.12 pages 2015
[ACT79]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit and I. Revel. Equivalent impact set-up for lightning strike damage on composite coupons. Proceedings of ICCM20, 20th International Conference on Composite Materials, Copenhagen (Danmark), 19-24th July 2015
[ACT80]I. Maillet, L. Michel and F. Lachaud. Analyse des vibrations de poutres composite délaminées par le modèle de Newton. Proceedings of Proceedings of JNC19, Journées Nationales sur les Composites, Lyon, 29 Juin- 1er Juillet 2015
[ACT81]C. Chen, L. Michel, C. Espinosa and F. Lachaud. Simulation d'impact de composites stratifiés et effets de l'environnement. Proceedings of Proceedings of JNC19, Journées Nationales sur les Composites, Lyon, 29 Juin- 1er Juillet 2015
[ACT82]S. Sassi, P. Marguerès, R. Le Begue and P. Olivier. DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING. Proceedings of 20th International Conference on Composite Materials - ICCM20 2015
[ACT83]F. Soulas, C. Espinosa, F. Lachaud, S. Guinard, B. Lepetit and I. Revel. Endommagement des structures composites soumises à l’impact foudre. Proceedings of Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet 2015 2015
[ACT84]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Simulation numérique avec prise en compte de la continuité spatiale des variabilités réparties sur évaluateurs CFRP. Proceedings of JNC19 - 19èmes Journées Nationales sur les Composites, Lyon (France) 2015
[ACT85]O. Dorival, P. Navarro, S. Marguet, C. Petiot, M. Bermudez, D. Mesnagé and J.-F. Ferrero. Comparaison expérimentale de l'absorption d'énergie lors d'impact sur plusieurs structures mousse-composite renforcées. Proceedings of 19e Journées Nationales sur les Composites - JNC 2015 2015
[ACT86]C. Sola, L. Michel, F. Lachaud, B. Castanié, A. Delabie and E. Mermoz . BEARING RESPONSE OF CFRPs : COMPARATIVE STUDY OF WOVEN AND UD FABRIC QUASI ISOTROPIC LAMINATES UNDER STATIC AND FATIGUE LOAD. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT87]C. Bouvet, T. Lisle, N. Hongkarnjanakul, M.-L. Pastor, S. Rivallant and P. Marguerès. Mesure de la ténacité de la rupture de fibres en compression par thermographie infrarouge. Proceedings of JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet 2015
[ACT88]L. Bernard, G. Michon, B. Castanié, V. Negre and D. Reveillon. Static and Dynamic Analysis of Bending-Torsion Coupling of a CFRP Sandwich Beam. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT89]S. Rivallant, J. Brassard, H. Abdulhamid and C. Bouvet. Etude expérimentale de l’impact basse vitesse et basse énergie sur plaques composites précontraintes. Proceedings of JNC 19 - 19èmes Journées Nationales sur les Composites, Lyon, France, 29 juin-1er juillet 2015
[ACT90]V. Achard, C. Bouvet and B. Castanié. Discrete ply modelling of failure scenario of open-hole tensile test. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT91]B. Castanié. THE VERTEX PROJECT: COMPLEX LOADING ANALYSIS AND VALIDATION OF COMPOSITE STRUCTURES. Proceedings of Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015 2015
[ACT92]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Discrete Ply Modelling analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT93]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. Conception Numérique d’un évaluateur technologique de grande dimension en composite pour la réparation collée. Proceedings of 19èmes Journées Nationales sur les Composites p.355-364 2015
[ACT94]J. Serra, B. Castanié, C. Bouvet and C. Petiot. Digital Image Correlation and Thermography analysis of notched CFRP under tension. Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015
[ACT95]X. Gong, A. Hurez, Y. Ge and E. De Luycker. Test en mode III pur du type ERCT (Edge Ring Crack Torsion). Proceedings of Dix-neuvième Journées Nationales sur les Matériaux Composites p.10 pages 2015
[ACT96]F. Pascal, P. Navarro, S. Marguet, P. Casari, J.-F. Ferrero and I. Tawk. Experimental and numerical study of oblique impact on helicopter blades. Proceedings of 18th International Conference on Composite Structures (ICCS18) 2015
[ACT97]F. Louf, S. Daouk, C. Cluzel, O. Dorival, L. Champaney and S. Audebert. Etude expérimentale de l’impact d’une liaison boulonnée sur le comportement dynamique d’une structure. Proceedings of CSMA 2015 - 12e colloque national en calcul de structures 2015
[ACT98]C. Rouzaud, F. Gatuingt, G. Hervé, N. Moussalam and O. Dorival. Vers une nouvelle approche d’analyse multi-fréquentielle pour la TVRC par approximants de Padé. Proceedings of CSMA 2015 - 12e colloque national en calcul de structures 2015
[ACT99]F. Tostain, C. Espinosa and S. Rivallant. Absorption d’énergie: un modèle de fragmentation diffuse et localisée pour le crash de composite carbone/epoxy. Proceedings of CSMA - 12ème Colloque National en Calcul des Structures, Giens, France, 18-22 mai 2015
[ACT100]Y. Aminanda, K. Mansur Ali, M. Nasir, M. Nazreen, A. Rivai, B. Castanié and P. Olivier. Spring-back Prediction of CRFP Composite Laminate Ribs . Proceedings of Conference on Advances in Composite Materials and Structures, Istanbul, April 2015 2015
[ACT101]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification de mécanismes d'endommagement de stratifiés carbone/époxy par couplage entre émission acoustique et thermographie infrarouge. Proceedings of Journées Scientifiques et techniques, Cachan, France, 12 mars 2015 2015
[ACT102]M. Ali Chebbi, F. Lachaud and F. Blanchet. A finite Element Model for Orthogonal Cutting of unidirectional [(0,90)2]S composite laminate.. Proceedings of Sixth International Congress on Design and Modeling of Mechanical Systems, mars 2015 2015 [DOI]
[ACT103]S. Daouk, F. Louf, C. Cluzel, O. Dorival and L. Champaney. Variability of a bolted assembly through an experimental modal analysis. Proceedings of IMAC XXXIII A Conference and Exposition on Structural Dynamics 2015 [DOI]
[ACT104]M. Ramanakoto, F. Eyma, T. Ramanantoandro, P. Gallien and B. Castanié. Wood surfaces characteristics for an acceptable bonding strength. Proceedings of 22th International Wood Machining Seminar 2015
[ACT105]N. Cadorin, R. Zitoune and P. Seitier . Influence of cutting parameters and wear in drilling of 3D woven carbon/epoxy composites. Proceedings of International Mechanical Engineering Congress and Exposition p.IMECE2014-37467 2014
[ACT106]L. Mezeix, M.N. Nasir, L. Aminanda, A. Rivai, B. Castanié, P. Olivier and K. Ali Mansour. Spring-back prediction through numerical simulation for composite manufacturing using autoclave process. Proceedings of Computational and experimental methods for composite materials and structures, Harbin (China), September 2014 2014
[ACT107]F. Pascal, P. Navarro, S. Marguet, J.-F. Ferrero, J. Aubry and S. Lemaire. Study of Medium Velocity Impacts on the Lower Surface of Helicopter Blades. Proceedings of International Symposium on Dynamic Response and Failure of Composite Materials (DRaF2014) 2014
[ACT108]S. Adam, L. Mezeix, A. Rivai, Y. Aminanda, P. Olivier, B. Castanié and K. Ali Mansour. Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process. Proceedings of Computational and experimental methods for composite materials and structures, Harbin (China), September 2014 2014
[ACT109]C. Rouzaud, F. Gatuingt, O. Dorival, G. Hervé and N. Moussalam. Frequency analysis of reinforced concrete structures submitted to accidental impacts. Proceedings of 2nd Conference on Technological Innovations in Nuclear Civil Engineering, TINCE2014 2014
[ACT110]V. Achard, C. Bouvet, B. Castanié and C. Chirol. Failure analysis of open hole tensile specimens with discrete ply modelling. Proceedings of International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy) 2014
[ACT111]M. Mounkaila, T. Camps, S. Sassi, P. Marguerès, P. Olivier, C. Escriba and J.-Y. Fourniols. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity. Proceedings of EWSHM 2014 p.560-566 2014
[ACT112]S. Sassi, P. Marguerès, T. Camps, M. Mounkaila and P. Olivier. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part II : Multi-Physical Correlations. Proceedings of EWSHM 2014 p.567-574 2014
[ACT113]V. Munoz, B. Vales, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Coupling infrared termography and acoustic emission for damage study in CFRP. Proceedings of Qirt 2014, the 12th International Conference on Quantitative Infrared Thermography, France 2014
[ACT114]L. Bernard, D. Cornette, V. Nègre, B. Kerdreux, B. Castanié and G. Michon. Couplage Aéroélastique Flexion-Torsion de Pale d’Hélicoptère. Proceedings of ViSHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr) 2014
[ACT115]F. Pascal, P. Navarro, S. Marguet, J.-F. Ferrero, J. Aubry and S. Lemaire . Experimental and Numerical Study of Oblique Impact on Helicopter Blades – Influence of the curvature. Proceedings of 16th European Conference on Composite Materials (ECCM16) 2014
[ACT116]P. Navarro, F. Pascal, J. Aubry, S. Marguet, J.-F. Ferrero and S. Lemaire. Semi-continuous approach for the study of impacts on woven composite laminates. Proceedings of Workshop on Composite Sizing 2014
[ACT117]N. Hongkarnjanakul, S. Rivallant and C. Bouvet. Modelling permanent indentation in composite subjected to impact : identification through a specific three-point bending test. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT118]P. Rahmé, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Drilling of thick composite structures with pilot hole using a twist drill. Proceedings of 16th European Conference on Composite Materials (ECCM16), Seville, Spain, June 22-26, 2014 2014
[ACT119]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. Toward a numerical conception of a technological evaluator for composite structural repair: shear characterization. Proceedings of The sixteenth European Conference for Composite Materials 2014
[ACT120]P. Rahmé, Y. Landon, R. Piquet, F. Lachaud and P. Lagarrigue. Analytical model for drilling thick composite structures with pilot hole using a twist drill. Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18-20, 2014 2014
[ACT121]P.-J. Liotier, Q. Govignon, E. Swery, S. Drapier and S. Bickerton. Permeability of sheared woven flax fibres reinforcements; Definition of parameters to model complex shape composites part processing by LCM. Proceedings of 16th European Conference on Composite Materials, ECCM 2014
[ACT122]M. Torres, F. Collombet, B. Douchin, L. Crouzeix and Y.-H. Grunevald. Multi-instrumented technical evaluator for the analysis of composites structures, numerical and experimental approach. Proceedings of MECHCOMP2014 - The 1st International Conference on Mechanics of Composites, Long Island (USA), June 8-12 2014
[ACT123]F. Soulas, C. Espinosa, F. Lachaud, Y. Duval, S. Guinard, B. Lepetit and I. Revel. Design of Mechanical Impact tests equivalent to lightning strikes. Proceedings of ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014 2014
[ACT124]T. Lisle, C. Bouvet, M.-L. Pastor and P. Marguerès. An experimental study of damage evolution in 2D thin woven composite under quasi-static loading using infrared thermography. Proceedings of ECCM16 2014
[ACT125]L. Chevallier, Q. Govignon, P. Olivier, G. Bernhart, J. Bouillonnec and M. Mayne-lhermite. Three-dimensional permeability determination of reinforced composites structures with vertically aligned carbon nanotubes forests. Proceedings of ICCM 16 - 16th International Conference on Composite Materials - Sevilla Spain 22-26 June 2014 p.8 Pages 2014
[ACT126]F. Pascal, P. Navarro, S. Marguet and J.-F. Ferrero. Modélisation de l'impact sur structure sandwich composite. Proceedings of Journée Thématique Dynamique Rapide (JTDR'2014) 2014
[ACT127]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy. Proceedings of JET 2014, Journées d'études techniques de Marrakech, Maroc, avril 2014 2014
[ACT128]A. Cerisier, L. Crouzeix, F. Collombet and Y.-H. Grunevald. TOWARD A MULTI-LEVEL EVALUATION OF BONDED REPAIRS FOR COMPOSITE ASSEMBLY: SHEAR CHARACTERIZATION. Proceedings of SEICO 13, SAMPE EUROPE 35th 2014
[ACT129]K. Fang, Z. Li and X. Gong. Curvature Shape Based Impact Damage Detection in Composite Laminates. Proceedings of 40th Annual Review of Progress in Quantitative Nondestructive Evaluation AIP Conf. Proc. p.1083-1090 2014 [DOI]
[ACT130]T. Lisle, N. Hongkarnjanakul, C. Bouvet, M.-L. Pastor, P. Marguerès and S. Rivallant. Measure of fracture toughness in composite structures using Infrared Thermography. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT131]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification of the elastic properties in CFRP composites. Proceedings of ACMA 2014 5th International Symposium on Aircraft Materials, Maroc, avril 2014 2014
[ACT132]R. Zitoune, V. Krishnaraj, S. Almabouacif and F. Collombet. DESIGN OF DOUBLE CONE TWIST DRILL GEOMETRY TO IMPROVE THE HOLES QUALITY WHILE DRILLING IN MULTI-STACK MADE OF CFRP/AL. Proceedings of Proceedings of International Mechanical Engineering Congress and Exposition. P. IMECE2014-36526 2014
[ACT133]S. Daouk, F. Louf, O. Dorival and L. Champaney. On the lack-of-knowledge theory for low and high values of uncertainties. Proceedings of 2nd International Symposium on Uncertainty Quantification and Stochastic Modeling, Uncertainties 2014, Rouen, France 2014 [HAL]
[ACT134]S. Prabhakaran, V. Krishnarajb, K. Senthil Kumar and R. Zitoune. Sound and Vibration Damping Properties of Flax Fiber Reinforced Composites. Proceedings of p.Vol. 97, 573-581 2014 [DOI]
[ACT135]C. Rouzaud, F. Gatuingt, O. Dorival, G. Hervé and N. Moussalam. Frequency analysis of reinforced concrete structures subjected to accidental impacts. Proceedings of XIth International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal 2014 [HAL]
[ACT136]C. Rouzaud, F. Gatuingt, O. Dorival and G. Hervé. Calcul des vibrations induites par un impact sur une structure. Proceedings of 32e rencontres universitaires de Génie Civil, AUGC 2014, Orléans, France 2014 [HAL]
[ACT137]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. INVESTIGATION OF IMPACT DAMAGE OF TAPERED COMPOSITE LAMINATES. Proceedings of ECCM 16 – 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014
[ACT138]T. Nguyen and P. Olivier. THERMAL AND MECHANICAL BEHAVIOUR OF PAN AND PITCHBASED CARBON FIBER WOVEN FABRIC REINFORCED PARTICLE FILLED EPOXY COMPOSITES. Proceedings of ICCM 16 - 16th International Conference on Composite Materials. Sevilla Spain 22-26 June 2014. p.8 pages 2014
[ACT139]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force estimation through high speed digital image correlation. Proceedings of 21th DYMAT technical meeting: High speed imaging for dynamic testing of material and structures (London, UK) 2013
[ACT140]L. Peng, X. Gong and L. Guillaumat. Modélisation numérique de structures composites réparées par collage de patchs externes en traction. Proceedings of Journée Scientifique et Technique : Assemblages des structures composites: technologies, comportement et tenue en service, 18 Novembre 2013, Talence Bordeaux, France p. 14 pages 2013 [DOI]
[ACT141]M. Torres, F. Collombet, B. Douchin, L. Crouzeix, R. Bazer-bachi, Y.-H. Grunevald, J. Lubin, T. Camps, X. Jacob, S. Rodriguez and K.-T. Wu. Monitoring of the curing process of an industrial composite structure by TJS and FUT. Proceedings of 35CIMM - 35 Congreso Internacional de Metalurgia y Materiales, Saltillo (Mexico) 2013
[ACT142]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification of the elastic properties of composite materials. Proceedings of 5th International Conference on Structural Analysis of Advanced Materials 2013
[ACT143]C. Espinosa, K. Bodjona, L. Michel and F. Lachaud. Numerical prediction of damage interaction during L-Shaped laminated composite structures unfolding. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM2013) p.461-464 2013 [DOI]
[ACT144]C. Espinosa, M. Ruiz-Ayuso and F. Lachaud. Inner damage and external dent in composite structures after impact - Part I : experimental observations. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM 2013) p.457-460 2013 [DOI]
[ACT145]K. Wong, X. Gong, S. Aivazzadeh and M.N. Tamin. Adhesive bonding characterization of composite joints. Proceedings of 19th International Conference on Composite Materials 2013 (ICCM-19), 28 July - 2 August 2013, Montreal, Quebec, Canada p.2945-2952 2013
[ACT146]L. Peng, X. Gong, L. Guillaumat and Z. Li. Numerical simulation of composite structure repaired by external bonded patches under tensile loading using cohesive elements. Proceedings of 19th International Conference on Composite Materials 2013 (ICCM-19),28 July - 2 August 2013, Montreal, Quebec, Canada p.8756-8765 2013
[ACT147]C. Bouvet, N. Hongkarnjanakul and S. Rivallant. Simulation d´endommagement d´impact sur stratifié composite : Effet du drapage et de la rupture de fibres en compression. Proceedings of CFM 2013 – 21ème Congrès Français de Mécanique, Bordeaux, France, 26-30 Août 2013
[ACT148]M. Haddad, R. Zitoune, H. Bougherara, F. Eyma and B. Castanié. Influence of trimming process on the surface quality and on the mechanical behavior of CFRP structures.. Proceedings of 19th International Conference on Composite Materials. 2013
[ACT149]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, T. Geernaert, S. Sulejmani, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Cure cycle monitoring of laminated carbon fiber-reinforced plastic by fiber Bragg gratings in microstructured optical fiber. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.3327-3335 2013
[ACT150]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Quantification of sources of variability in CRFP plates cured in autoclave. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.2560-2567 2013
[ACT151]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, S. Rodriguez, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Cure monitoring of an autoclave manufactured industrial part: added value of complementary instrumentation. Proceedings of ICCM-19 – The 19th International Conference on Composite Materials, Montréal (Canada), July 28 – August 2 p.1178-1187 2013
[ACT152]P. Marguerès, T. Camps, P. Olivier, S. Sassi and M. Mounkaila. CURE MONITORING OF CFRP: ELECTRICAL IMPEDANCE ANALYSIS. Proceedings of 19th International Conference on Composite Materials - ICCM19 2013
[ACT153]B. Castanié, S. Crézé, J.-J. Barrau and L. Risse. Offset Failure in Filled Hole Compression Tests. Proceedings of 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2. 2013
[ACT154]N. Cadorin, R. Zitoune, F. Collombet, B. Castanié and M. Seve. Influence of cutting parameters and wear in drilling of 3D wowen carbon/epoxy composite. Proceedings of 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2 2013
[ACT155]M. Boulanghien, G. Bernhart, F. Berthet and Y. Soudais. FIBRE CHARACTERISATION OF STEAM THERMAL PROCESS RECYCLED CARBON FIBRE/EPOXY COMPOSITES. Proceedings of ICCM19- The 19th International conference on composites materials Composite Materials: the great advance p.9087-9094 2013
[ACT156]I. Maillet, S. Claro-neto, M. Fressinet, F. Lachaud and Y. Gourinat. Evaluation of Delamination Propagation in a Composite Structure under Vibration Loading. Proceedings of 19th International Conference on Composite Materials, Montréal 2013
[ACT157]J.-C. Passieux, P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero and J.-N. Périé. Experimental study of impacts on helicopter blades using digital image correlation. Proceedings of 19th International Conference on Composite Materials, ICCM19, (Montréal, Canada) 2013
[ACT158]P. Navarro, F. Pascal, J. Aubry, S. Marguet, J.-F. Ferrero, S. Lemaire and I. Tawk. Study of oblique impacts on helicopter blades. Modelling of woven composite laminates made of plies with different orientation. Proceedings of International Conference on Composites and Structures 17 (ICCS17) 2013
[ACT159]S. Rivallant, H.A. Israr Ahmad and J.-J. Barrau. Modélisation par éléments finis de l’écrasement de stratifiés d’unidirectionnels carbone/époxy à faible vitesse. Proceedings of JNC 18 - 18èmes Journées Nationales sur les Composites, Nantes, France, 12-14 Juin 2013
[ACT160]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. Caractérisation d’un modèle d’indentation permanente pour impact basse vitesse à l’aide d’un essai de flexion 3 points. Proceedings of JNC 18 - 18èmes Journées Nationales sur les Composites, Nantes, France, 12-14 Juin 2013
[ACT161]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Étude expérimentale de l’endommagement d’un composite tissé mince sous traction quasi-statique via thermographie infrarouge. Proceedings of JNC 18 2013
[ACT162]S. Sassi, P. Marguerès, T. Camps and P. Olivier. Suivi de cuisson de composites Carbone/Epoxy par impédancemétrie électrique. Proceedings of JNC 18 2013
[ACT163]C. Chen, L. Michel, C. Espinosa and F. Lachaud. Etude de l’effet du vieillissement humide sur le comportement à l’impact d’un stratifié composite carbone-époxy. Proceedings of Journées Nationales sur les Composites (JNC18) 2013
[ACT164]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Des avancées dans le suivi de cuisson des pièces composites. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT165]Y. Davila, L. Crouzeix, B. Douchin, F. Collombet and Y.-H. Grunevald. Etude des sources de variabilités d’une structure composite CFRP réalisée en autoclave. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT166]L. Peng, X. Gong and L. Guillaumat. Modélisation numérique de la rupture par fissuration dans un assemblage collé de composites en appliquant les modèles de zone cohésive. Proceedings of Dix-huitième Journées Nationales sur les Matériaux Composites, JNC18, 10-12 Juin. 2013, Nantes p.9 pages 2013
[ACT167]L. Crouzeix, Y. Davila, B. Douchin, F. Collombet and Y.-H. Grunevald. Evaluation numérique et expérimentale d’une réparation en double escalier sous chargements combinées. Proceedings of 18th JNC, Journées Nationales sur les Composites, Nantes, France. 2013
[ACT168]I. Maillet, L. Michel, F. Lachaud, M. Fressinet and Y. Gourinat. Modélisation de la propagation de délaminage dans une structure composite soumise à un chargement vibratoire. Proceedings of Journées Nationales des Composites, JNC18, Nantes 2013
[ACT169]F. Berthet, A. Njionhou and B. Castanié. Influence géométrique de la présence de fils de couture sur la perméabilité d'un stratifié. Proceedings of JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013 2013
[ACT170]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence du procédé d'usinage sur l'usinabilité et le comportement mécanique de pièces composites. Proceedings of JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013 2013
[ACT171]L. Barrière, S. Marguet, J.-C. Passieux, B. Castanié and P. Cresta. Modeling strategies for postbuckilig of large stiffened structures. Proceedings of ICCS 16, Intenational Conference on Composite Structure, June 17-20 (Porto, Portugal) 2013
[ACT172]N. Cadorin, R. Zitoune, B. Castanié, F. Collombet and M. Seve. Etude expérimentale de l'influence des paramètres de coupe et de l'usure de l'outil sur la qualité de percage d'un composite tissé 3D.. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT173]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Impact et tenue résiduelle des inserts de structures sandwichs. Proceedings of JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013 2013
[ACT174]S. Dols, C. Bouvet, B. Castanié, L. Mezeix and J.-P. Giavarini. Experimental analysis of impact and pull-through after impact in insert in sandwich structures. Proceedings of 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013 2013
[ACT175]L. Barrière, S. Marguet, P. Cresta, B. Castanié and J.-C. Passieux. Décomposition de domaine et réduction de modèle: stratégie de résolution pour le post-flambement local des structures raidies. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT176]M. Dauphin, S. Albin, C. Roucoules, Y. Le Maoult, M. El Hafi and F. Schmidt. Modélisation des échanges radiatifs dans un système d’éclairage automobile par la méthode de Monte-Carlo. Proceedings of SFT 2013
[ACT177]E. De Luycker, D.J. Benson, T. Belytschko, Y. Bazilevs and M.C. Hsu. Approche Isogéométrique avec XFEM pour la mécanique de la rupture. Proceedings of Proceedings of 11e Colloque National en Calcul des Structures, CSMA, Giens 2013
[ACT178]J.-C. Passieux, L.A. Gomes Perini, E. De Luycker and J.-N. Périé. PGD et mesure de champs par corrélation d’images. Proceedings of 11e Colloque National en Calcul des Structures, CSMA (Giens, Fr) 2013
[ACT179]V. Budinger, O. Cherrier, J. Morlier and F. Lachaud. Damage Location Method for Thin Composites Structures - Appplication to an Aircraft Door. Proceedings of International Workshop on Aircraft System Technologies (AST 2013), Hambourg, Allemagne 2013
[ACT180]I. Maillet, L. Michel, M. Fressinet, F. Lachaud and Y. Gourinat. Evaluation of Delamination Propagation in a Composite Structure Under Vibration Loading. Proceedings of 9th International Conference on Composite Science and Technology (ICCST-9) p.174-185 2013
[ACT181]F. Collombet, L. Crouzeix, Y. Davila, A. Cerisier, B. Douchin and Y.-H. Grunevald. Added value of technological evaluators for structural repair characterization: MITE Toolbox. Proceedings of SEICO13 – Sampe Europe 34th International Conference & Forum, Paris (France), March 11-12 p.179-186 2013
[ACT182]L. Crouzeix, Y. Davila, F. Collombet, B. Douchin, Y.-H. Grunevald and R. Zitoune. Study of step-lap repairs from elementary coupons to structural evaluators. Proceedings of SEICO13 – Sampe Europe 34th International Conference & Forum, Paris (France), March 11-12 p.167-172 2013
[ACT183]M. Boulanghien, G. Bernhart, F. Berthet, M. R'mili and Y. Soudais. Propriétés mécaniques de fibres de carbone recyclées par vapo-thermolyse. Proceedings of Mecamat 2013
[ACT184]J. Crevel, F. Lachaud, F. Berthet and M.-L. Pastor. From Microstructure Characterization to Multi-Scale Modelling of Injected Carbon Fibre Reinforced PEEK. Proceedings of 19th International Conference on composite materials 2013
[ACT185]J. Crevel, M.-L. Pastor, F. Berthet and F. Lachaud. Étude de l’influence des paramètres d'injection sur le comportement de PEEK renforcé de fibres de carbone par thermographie infrarouge. Proceedings of JNC 18 2013
[ACT186]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Application of non destructive testing to the detection of aeronautical defects in composite structures. Proceedings of International Conference of Nonconventional Technologies 2013
[ACT187]T. Ramananantoandro, M. Ramanakoto, A. Rajemison and F. Eyma. Relationship between density and aesthetic attributes of wood and preference of consumers. Proceedings of 67th FPS International Convention and 56th SWST International Convention 2013
[ACT188]H. Abdulhamid, C. Bouvet, L. Michel, J. Aboissiere and C. Minot. Etude expérimentale de l’endommagement à l’impact de plaques composites avec reprise de plis à pente asymétrique. Proceedings of Journées Nationales des Composites, JNC18, Nantes 2013
[ACT189]L. Michel, S. Garcia, C. Yao, C. Espinosa and F. Lachaud. Experimental and numerical investigation of delamination in curved-beam multidirectional laminated composite specimen. Proceedings of 12th International Conference on Fracture and Damage Mechanics (FDM 2013) p.389-392 2013
[ACT190]S. Garcia, L. Michel, C. Espinosa, F. Lachaud and R. Piquet. Experimental Study of Corner Shaped Composite Laminates Subjected to Pure Bending. Proceedings of Proceedings of the 9th International Conference on Composite Science and Technology (ICCST-9) 2013
[ACT191]M. Boulanghien , S. Ye, M. R'mili, G. Bernhart, Y. Soudais and F. Berthet. Recyclage de composites à fibre de carbone par un procédé de vapo-thermolyse = Recycling of carbon fiber composites using a steam-thermolysis process. Proceedings of JNC 18 - 18èmes Journées Nationales sur les Composites 12-14 juin 2013 2013
[ACT192]H.A. Israr Ahmad, S. Rivallant and J.-J. Barrau. Numerical modeling of [0°/90°] CFRP laminated plates under low velocity crushing. Proceedings of ACCM 8 – 8th Asian-Australasian Conference on Composite Materials, Kuala Lumpur, Malaysia, 6-8 November 2012
[ACT193]P. Marguerès, T. Camps and P. Olivier. Impédancemétrie électrique pour le monitoring de composites Carbone/Epoxy. Proceedings of Journée Scientifique et Technique (JST) AMAC "Smart Material : intégration de fonctions et comportement mécanique des multi-matériaux" ,Laval, France 2012
[ACT194]C. Espinosa, J. Limido, F. Lachaud and J.-L. Lacome. Combining a CDM model and a FE-Particle method to analyse the ruin modes of a composite structure during a crash. Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) 2012
[ACT195]L. Barrière, S. Marguet, B. Castanié and P. Cresta. A Computational Strategy For Post-buckling Analysis Of Large Stiffened Structures. Proceedings of ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012 2012
[ACT196]B. Castanié, Y. Aminanda and C. Schwob. Modelling Of Impact On Sandwich Structure For Fast Maintenance Loops. Proceedings of ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012. 2012
[ACT197]A. Kolopp, C. Bouvet and S. Rivallant. Experimental study on sandwich structures subjected to medium velocity impacts for aircraft armour applications. Proceedings of ICSS 10 - 10th International Conference on Sandwich Structures, Nantes, France, August 27-29 2012
[ACT198]O. De Almeida, E. Bessard and G. Bernhart. Influence of processing parameters and semi-finished product on consolidation of carbon/PEEK laminates. Proceedings of ECCM15 (European Conference On Composite Materials 15), Venecia, Italy 2012
[ACT199]L. Escale, O. De Almeida, G. Bernhart and J.-F. Ferrero. Comparison of impact resistance of carbon/epoxy and carbon/PEEK composite laminates. Proceedings of ECCM15 (European Conference On Composite Materials 15), Venecia, Italy 2012
[ACT200]C. Chen, C. Espinosa, L. Michel and F. Lachaud. A numerical Approach for analyzing post-impact behaviour of composite laminate plate under in-plane compression. Proceedings of ECCM15 - 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Venice, Italy, 24-28 June 2012 2012
[ACT201]C. Bouvet, S. Rivallant and N. Hongkarnjanakul. Effect of fibre failure on low velocity impact of composite laminate with different stacking sequences. Proceedings of ICMNMMCS, Torino, Italy, June 18-20 2012
[ACT202]C. Bouvet, N. Hongkarnjanakul and S. Rivallant. Discrete ply modelling of low velocity impact and compression after impact in unidirectional laminated composites. Proceedings of ECCM 15 – 15th European Conference on Composite Materials, Venice, Italy, June 24-28 2012
[ACT203]N. Hongkarnjanakul, C. Bouvet and S. Rivallant. The effect of stacking sequence on the low-velocity impact response of composite laminates. Proceedings of ECCM 15 – 15th European Conference on Composite Materials, Venice, Italy, June 24-28 2012
[ACT204]T. Rouault, C. Bouvet, M. Bizeul, V. Nègre and P. Rauch. A bundle-scale model of propagation of a through-the-thickness notch in a woven composite under fatigue loading. Proceedings of 15th ECCM, Venice (Italy), June 24-28 2012
[ACT205]B. Vieille, V.M. Casado and C. Bouvet. Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic- and thermosetting composites. Proceedings of 15th ECCM, Venice (Italy), June 24-28 2012
[ACT206]I. Maillet, L. Michel, M. Fressinet and Y. Gourinat. Comparison between static and dynamic results for mode I and mode II fatigue delamination growth onset of unidirectionnal composite. Proceedings of European Conference on Composite (ECCM15), Venezia 2012
[ACT207]F. Collombet, L. Crouzeix, Y.-H. Grunevald, H. Zeng, Y. Davila, B. Douchin and A. Gillet. Primary principal composite structure repair with multi-instrumented technological evaluator tool box. Proceedings of ECCM15 - The 15th European Conference on Composite Materials, Venice (Italy), June 24-28 2012
[ACT208]L. Crouzeix, Y. Davila, F. Collombet, B. Douchin, Y.-H. Grunevald, R. Zitoune and F. Cénac. Study of double step lap composite repairs on CFRP evaluators. Proceedings of ECCM15 - The 15th European Conference on Composite Materials, Venice (Italy), June 24-28. 2012
[ACT209]H.A. Israr Ahmad, S. Rivallant and J.-J. Barrau. Experimental test to identify the mean crushing stress of 0° and 90° unidirectional plies inside a laminate. Proceedings of ECCM 15 – 15th European Conference on Composite Materials, Venice, Italy, June 24-28 2012
[ACT210]P. Navarro, J. Aubry, S. Marguet, J.-F. Ferrero and S. Lemaire. Study of oblique impacts on helicopter blades: a semi-continuous approach the modeling of thin woven composite panels . Proceedings of International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS 2012) 2012
[ACT211]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Effect of Machining Parameters on high speed trimming of CFRP. Proceedings of 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT212]B. Reine, J. Di-tomaso, G. Dusserre and P. Olivier. Study of Thermal Behaviour of Thermoset Polymer Matrix Filled with Micro and Nanoparticles. Proceedings of ECCM 15th - The 15th European Conference on Composites Materials, Venice (Italy), June 24-28 2012
[ACT213]F. Boyer, P. Olivier, F. Pons and P.H. Cadaux. Mechanical and electrical behavior of a PEEK/carbon nanotubes composite. Proceedings of 15th European Conference on Composite Materials 2012
[ACT214]S. Bin Mohamed Rehan, J. Rousseau, X. Gong, L. Guillaumat and J.S.M. Ali. Effects of fiber orientation on the mode I crack propagation in a multidirectional carbon-epoxy laminates. Proceedings of 15th European Conference on Composite Materials, ECCM15, Venice, ITALY, June 24-28, 2012 p. ID 1794 , 8 pages 2012
[ACT215]K. Wong, X. Gong, S. Aivazzadeh and M.N. Tamin. Numerical simulation of mode I delamination of multidirectional composites with fibre bridging effect. Proceedings of 15th European Conference on Composite Materials, ECCM15, Venice, ITALY, June 24-28, 2012 p.ID2123, 8 pages 2012
[ACT216]T. Poumadere, F. Lachaud, G. Bernhart, R. Piquet and F. Berthet. Influence of manufacturing process over mechanical properties of discontinuous carbon/epoxy composites realized by injection-tranfer. Proceedings of ECCM15 (European Conference On Composite Materials 15), Venecia, Italy 2012
[ACT217]P. Selva, O. Cherrier, J. Morlier, F. Lachaud and V. Budinger. Model driven versus Data Driven Damage Localization Methods: EMI Monitoring of Thin Composites Structures. Proceedings of 1st International Conference on Composites Dynamics (DYNACOMP), Arcachon, France 2012
[ACT218]M. Dauphin, S. Albin, M. El Hafi, Y. Le Maoult and F. Schmidt. Towards thermal model of automotive lamps. Proceedings of 11 international conference on Quantitative Infrared Thermography 2012
[ACT219]F. Collombet, G. Luyckx, C. Sonnenfeld, N. Lammens, Y.-H. Grunevald, M. Torres, Y. Davila, B. Douchin, L. Crouzeix, H. Hernandez-moreno, R. Zitoune and R. Bazer-bachi. Embedded instrumentation: from coupon level to a representative composite part. Proceedings of SEICO12 - Sampe Europe 33rd International Technical Conference & Forum, Paris (France) p.262-291 2012
[ACT220]T. Rouault, C. Bouvet, V. Nègre and P. Rauch. Study of the crack growth in composite rotor blade skin. Proceedings of 38th European Rotorcraft Forum 2012
[ACT221]P. Beneditti, G. Dusserre, T. Cutard and J. Huez. Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications. Proceedings of FPCM 11 - 11th International Conference on Flow Processing in Composite Materials, Auckland (New Zealand) 2012
[ACT222]O. Valentin, G. Dusserre, T. Cutard and F. Nazaret. Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model. Proceedings of EUROGRESS - 55th International Colloquium Refractories, Aachen (Germany) 2012
[ACT223]T. Cutard, N. Donval, F. Nazaret and N. Schmitt. Fibre reinforced refractory concrete as a tooling material for organic matrix composite processing routes . Proceedings of ECCM 15 - 15th European Conference on Composite Materials, Venice (Italy) 2012
[ACT224]B. Castanié and J.-F. Ferrero. Nonlinear Response of Symmetric Sandwich structures Subjected to in-plane loads. Proceedings of ICSS 10, 10th International Conference On Sandwich Structures. Nantes, France, 27-29 August 2012 2012
[ACT225]J. Crevel, F. Berthet, F. Lachaud and M.-L. Pastor. EXPERIMENT AND MODELLING OF INJECTED CARBON-FIBRE-REINFORCED-PEEK BEHAVIOUR UNDER TENSILE LOADING. Proceedings of ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT226]T. Lisle, C. Bouvet, M.-L. Pastor, P. Marguerès and R. Prieto Corral. Damage assessment of thin woven composite subjected to quasi-static tensile loading using infrared thermography. Proceedings of ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS 2012
[ACT227]E. Bessard, O. De Almeida and G. Bernhart. Experimental and modelling of isothermal crystallization of PEEK matrix and C/PEEK composites with application of parallel Avrami model. Proceedings of ECCM15 (European Conference On Composite Materials 15), Venecia, Italy 2012
[ACT228]K. Wong, X. Gong, S. Aivazzadeh and M.N. Tamin. Water uptake behaviour in carbon/epoxy composites. Proceedings of DURACOSYS 2012 - 17 au 19 septembre - Bruxelles, Belgique, p.10 pages 2012
[ACT229]H.A. Israr Ahmad, S. Rivallant, H. Zeng and J.-J. Barrau. Finite element modelling of CFRP plates under crushing. Proceedings of ICCM 18 - 18th International Conference on Composite Materials, Jeju Island, Korea, 21-26 August 2011
[ACT230]P. Cheng, X. Gong and S. Aivazzadeh. Design and optimization of composite laminates repaired by bonding external patches . Proceedings of 18th International Conference on Composite Materials, August 22-26, 2011, Jeju-do, Corée du Sud p.6 pages 2011
[ACT231]L. Peng, X. Gong and L. Guillaumat. Numerical simulation of damage propagation in CFRP laminates repaired by external bonded patches under tensile loading . Proceedings of 18th International Conference on Composite Materials, August 22-26, 2011, Jeju-do, Corée du Sud p.7 pages 2011
[ACT232]P. Selva, O. Cherrier, V. Budinger, F. Lachaud and J. Morlier. Smart EMI monitoring of thin composite structures. Proceedings of 16th International Conference on composite Structures (ICCS16), Porto, Portugal 2011
[ACT233]M. Torres, B. Douchin, F. Collombet, L. Crouzeix, Y.-H. Grunevald, R. Bazer-bachi and T. Camps. Study of the parameters variability of monitoring patch used in composites instrumentation. Proceedings of 16th ICCS, International Conference on Composite Structures, Porto, Portugal. 2011
[ACT234]I. Maillet, L. Michel, M. Fressinet, G. Michon and Y. Gourinat. Mise en place d’un essai de détermination de seuil de propagation en fatigue du délaminage de mode I basé sur la résonance d’une éprouvette en matériau composite unidirectionnel. Proceedings of 17èmes Journées Nationales des Composites, Poitiers 2011
[ACT235]M. Torres, B. Douchin, F. Collombet, L. Crouzeix, Y.-H. Grunevald, R. Bazer-bachi, J. Lubin and T. Camps. Valeur ajoutée d’une encapsulation de capteurs silicium pour l’instrumentation à coeur des structures composites. Proceedings of the 17th JNC, Journées Nationales sur les Composites, Poitiers, France. 2011 [HAL]
[ACT236]F. Lachaud, C. Espinosa and L. Michel. Prévision de l'endommagement de composites stratifiés carbone-époxy sous chargement de type impact. Proceedings of AMAC 17èmes Journées Nationales sur les Composites (JNC17), Juin 2011, Poitiers (FR) 2011
[ACT237]J. Aubry, P. Navarro, J.-F. Ferrero, S. Marguet and S. Lemaire. Numerical study of the behavior of helicopter blades submitted to impacts at various angles. Proceedings of XVI International Conference on Composites Structures (ICCS XVI) 2011
[ACT238]S. Catche, R. Piquet, F. Lachaud, B. Castanié and A. Benaben. Relation between surface roughness indicators and static strengh of drilled laminates. Proceedings of 15th International Conference on Composite Structures, ICCS 16, Porto, June 28-30 2011
[ACT239]F. Boyer, P. Olivier, M. Guehenec, F. Leonardi, P. Van Durmen, P. Demont, F. Pons and P.H. Cadaux. Comportement mécanique et électrique d'un composite PEEK/fibres de carbone/ nanotubes de carbone. Proceedings of Journées Nationales des Composites 17 2011 [HAL]
[ACT240]K. Wong, X. Gong, S. Aivazzadeh and M.N. Tamin. Tensile behaviour of anti-symmetric CFRP composite. Proceedings of 11th International Conference on the mechanical behavoir of Materials, 5-9 Juin, 2011COME LAKE, ITALY p.6 pages 2011
[ACT241]T. Poumadere, F. Lachaud, G. Bernhart, R. Piquet and F. Berthet. Etude du comportement d'un matériau composite réalisé par injection-transfert de fibres mi-longues discontinues de carbone et de résine époxyde = Investigation of the behaviour of a discontinuous medium length carbon fibres and epoxy resin composite material manufactured by injection-transfer m. Proceedings of JNC17-17émes journées nationales des composites p.9 pages 2011 [HAL]
[ACT242]A. Kolopp, S. Rivallant and C. Bouvet. Impact sur structures sandwich composites pour application de blindage aéronautique. Proceedings of JNC 17 - 17èmes Journées Nationales sur les Composites, Poitiers, France, 15-17 Juin 2011
[ACT243]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. simulation de la polymèrisation par infra rouge de composites. Proceedings of SFT 2011, 24-27 mai 2011, perpignan 2011
[ACT244]A. Shahdin, J. Morlier, G. Michon, L. Mezeix, C. Bouvet and Y. Gourinat. Application of Modal Analysis for Evaluation of the Impact Resistance of Aerospace Sandwich Materials. Proceedings of 29th IMAC, A Conference on Structural Dynamics, Jacksonville USA p.171-177 2011 [DOI] [OATAO]
[ACT245]F. Berthet, S. Nakouzi, F. Schmidt and Y. Le Maoult. Cartes de température maximum lors de la simulation de la réticulation de la résine RTM 6 dans une plaque composite. Proceedings of JNC 17 (Journées nationales des composites) 2011 [HAL]
[ACT246]C. Paris, G. Bernhart, P. Olivier and O. De Almeida. Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques. Proceedings of JNC 17 - 17èmes Journées Nationales sur les Composites 2011
[ACT247]E. Bessard, O. De Almeida and G. Bernhart. Etude et modélisation de la cinétique de cristallisation du PEEK lors de refroidissements isothermes et anisothermes. Proceedings of JNC 17 - 17èmes Journées Nationales sur les Composites 2011
[ACT248]L. Adam, C. Bouvet, B. Castanié, A. Daidié and E. Bonhomme. Experimental and numerical analysis of pull-through of fasteners in laminates. Proceedings of ICCS16, Porto (Portugal), 28-30 juin 2011
[ACT249]S. Bin Mohamed Rehan, J. Rousseau, X. Gong, L. Guillaumat and J.S.M. Ali. Effects of fiber orientation of adjacent plies on the mode I crack propagation in a carbon-epoxy laminates . Proceedings of 11th International Conference on the mechanical behavoir of Materials, 5-9 Juin, 2011 COME LAKE, ITALY p.6 pages 2011
[ACT250]S. Nakouzi, F. Schmidt, Y. Le Maoult, F. Berthet and J. Pancrace. Infrared curing simulations of liquid composites molding. Proceedings of 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS p.1125-1130 2011 [DOI]
[ACT251]A. Njionhou, F. Berthet, B. Castanié and C. Bouvet. Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus. Proceedings of JNC17-17émes journées nationales des composites 2011 [HAL]
[ACT252]A.V. Duong, S. Rivallant, J.-J. Barrau, C. Petiot and B. Malherbe. Influence of speed on the crushing behavior of composite plates. Proceedings of ACCM 7 – 7th Asian-Australasian Conference on Composite Materials, Taipei, Taiwan, 15-18 November 2010
[ACT253]L. Adam, A. Daidié, B. Castanié and E. Bonhomme. Explicit simulation and high-performance computing, application to a bolt tensile test. Proceedings of IDMME-Virtual Concept 2010, Bordeaux, France 2010
[ACT254]M. Ilyas, C. Espinosa, F. Lachaud, L. Michel and M. Salaün. Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. Proceedings of 9th International Conference on Fracture and Damage Mechanics, 20-22 Sept 2010, Nagasaki (J) 2010 [OATAO]
[ACT255]X. Xiao, A. Conway and X. Gong. Modelling meso structure of triaxial braided. Proceedings of American Society for Composites 2010 Conference, Sep 20- 23 2010, Dayton, OH, USA p.9 pages 2010
[ACT256]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Study of the fatigue crack growth in thin composite skins made of glass woven plies. Proceedings of 14th European Conference on Composite Materials ECCM, Budapest (Hungary), June 7-10 2010
[ACT257]A. Abbadi, L. Michel and B. Castanié. Experimental Analysis of Composite Structures Debonding under Cyclic Loading. Proceedings of ICCE-18 Anchorage, Alaska,USA, July 4-10, 2010 2010
[ACT258]P. Navarro, J.-F. Ferrero, S. Marguet and S. Lemaire. Modelling of impacts on sandwich panels . Proceedings of 9th International Conference on Sandwich Structures (ICSS 9) 2010
[ACT259]M. Torres, L. Crouzeix, F. Collombet, B. Douchin and Y.-H. Grunevald. Mechanical performance of composite structures with embedded silica sensors: concept of monitoring patch. Proceedings of the 14th ECCM, European Conference on Composite Materials, Budapest, Hungary. 2010
[ACT260]P. Navarro, J.-F. Ferrero, S. Marguet, M. De La Mota and S. Lemaire. Modelling of the impact on sandwich panels. Proceedings of IV European Conference on Computational Mechanics (ECCM 2010) 2010
[ACT261]M. Bordival, B. Cosson, Y. Le Maoult and F. Schmidt. A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics. Proceedings of 13th ESAFORM CONFERENCE ON MATERIAL FORMING 2010
[ACT262]R. Gantois, A. Cantarel, J.-N. Felices and F. Schmidt. Numerical simulation of Resin Transfer Molding using BEM and Level Set method. Proceedings of 13th ESAFORM CONFERENCE ON MATERIAL FORMING 2010
[ACT263]S. Nakouzi, J. Pancrace, F. Schmidt, Y. Le Maoult and F. Berthet. Curing simulation of composites coupled with infrared heating. Proceedings of ESAFORM CONFERENCE 7-9 april 2010 brescia italy 2010
[ACT264]A. Weiss, W. Trabelsi, L. Michel, J.-J. Barrau and S. Mahdi . Influence of ply-drop location on the fatigue behaviour of tapered composites laminates. Proceedings of FATIGUE 2010 p.1105-1114 2010 [DOI]
[ACT265]E. Péronnet, F. Eyma, M.-L. Pastor and H. Welemane. Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. Proceedings of CMOI (Contrôle et Mesures Optiques pour l’Industrie) 2010
[ACT266]O. De Almeida, F. Touchard and L. Chocinski-Arnault. Heterogeneous tensile behavior of impact-modified polypropylene plates processed by injection moulding. Proceedings of PPS 26 - The Polymer Processing Society 26th Annual meeting 2010
[ACT267]E. Bessard, O. De Almeida and G. Bernhart. Analyse du comportement du PEEK dans le procédé de fabrication de composites structuraux par thermo-compression. Proceedings of Matériaux 2010 2010
[ACT268]E. Bessard, O. De Almeida and G. Bernhart. Melt state behaviour of PEEK and processing window interpretation for fast compression moulding process. Proceedings of AMPT 2010 - International conference on Advances in Materials and Processing Technologies p.167-172 2010
[ACT269]N. Decultot, L. Robert, V. Velay and G. Bernhart. Single point incremental sheet forming investigated by in-process 3D digital image correlation. Proceedings of 14th International Conference on Experimental Mechanics (ICEM'14), Poitiers (France), 4-9 July 2010 p.1151-1154 2010 [DOI]
[ACT270]P. Rahmé, C. Bouvet, S. Rivallant, V. Fascio and G. Valembois. Mechanical Protection For Composite Structures Submitted To Low Energy Impact. Proceedings of ECCM 14 – 14th European Conference on Composite Materials, Budapest, Hungary, 7-10 June 2010
[ACT271]C. Bouvet, S. Rivallant and J.-J. Barrau. Modelling Of Impact Damage And Permanent Indentation On Laminate Composite Plate. Proceedings of ECCM 14 – 14th European Conference on Composite Materials, Budapest, Hungary, 7-10 June 2010
[ACT272]L. Mézeix, D. Poquillon, C. Bouvet and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibres As Core Material: Processing And Mechanical Properties. Proceedings of Icss 9, Pasadena, California, June 14-16 2010
[ACT273]F. Nazaret, T. Cutard and O. Barrau. Damage and creep modelling for refractory structure sizing. Proceedings of 5th International Symposium on Advances in Refractories, Vancouver (Canada) 2010
[ACT274]N. Donval, A. Mazzoni and T. Cutard. Microstructural design and study of fibre reinforced refractory concretes. Proceedings of ECCM 14 - 14th European Conference on Composite Materials , Budapest (Hungary) 2010
[ACT275]F. Nazaret, T. Cutard and O. Barrau. Sizing of refractory castable gas-burner using thermomechanical simulations. Proceedings of Symposium "Refractories : recent developments in Materials, Production and Use" - CIMTEC 2010 - Grosseto (Italy) 2010
[ACT276]A. Njionhou, F. Berthet and B. Castanié. Relationships between process parameters and mechanical properties of laminated plates made by L.R.I.. Proceedings of FPCM 10 - 10th International conference on Flow Processes in Composite Materials p.9p 2010
[ACT277]J. Pancrace, P. Lamesle, E. Rodier, F. Schmidt, Y. Le Maoult and F. Berthet. 2209 - Evolution de la microstructure et influence de la pollution atmosphérique lors de la mise en oeuvre d'une résine thermodurcissable . Proceedings of Matériaux 2010 p.9p 2010
[ACT278]V. Velay, G. Bernhart, A. Martinier and J.Y. Moraux. High temperature fatigue of spf die ni-cr-fe heat resistant nickel-chromium cast steels. Proceedings of ICSAM 2009 - 10th International Conference On Superplasticity In Advanced Materials - Seattle, USA p.69-76 2010 [DOI]
[ACT279]M. Ilyas, C. Espinosa, F. Lachaud and M. Salaün. Dynamic delamination modeling using cohesive finite elements. Proceedings of 9th International DYMAT Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07-11 Sept 2009, Brussels (B) 2009 [OATAO]
[ACT280]M. Ilyas, J. Limido, F. Lachaud, C. Espinosa and M. Salaün. Modélisation SPH 3D de l'impact basse vitesse de plaque composite. Proceedings of 19 ème Congrés Français de Mécanique, 24-28 Aug 2009, Marseille (FR) 2009 [OATAO]
[ACT281]D. Guillon, S. Rivallant, J.-J. Barrau, C. Petiot, P. Thevenet and B. Malherbe. Experimental and numerical study of splaying mode crush of CFRP laminates. Proceedings of ICCM 17 – 17th International Conference on Composite Materials, Edinburgh, UK, 27-31 July 2009
[ACT282]M. Torres, L. Crouzeix, B. Douchin, F. Collombet, H. Hernandez-moreno and J.-L. Gonzalez-velazquez. Strain field characterization of filament winding pattern at ±55° using numerical image correlation. Proceedings of the 17th ICCM, International Conference on Composite Materials, Edinburgh, Scotland. 2009
[ACT283]A. Njionhou, F. Berthet and B. Castanié. Parameters affecting mechanical properties of composite manufactured by liquid resin infusion (LRI) en fonction des paramètres de fabrication. Proceedings of ICCM 17 - 17th International Conference on Composite Materials 2009
[ACT284]M. Ilyas, F. Lachaud, C. Espinosa and M. Salaün. Dynamic delamination of aeronautic structural composites by using cohesive finite elements. Proceedings of 17th International Conference on Composite Materials (ICCM-17), 27-31 July 2009, Edinburgh (GB) 2009 [OATAO]
[ACT285]L. Crouzeix, M Torres, B Douchin, J-N périé, F Collombet and H. Hernandez-moreno. Assessment of the winding pattern effects on the behaviour of filament wound pipes by using full field measurements and the equilibrium gap method. Proceedings of ICCM17 - 17th International Conférence on Composite Materials, Edinburgh (UK) 2009
[ACT286]D. Choqueuse, B. Bigourdan, A. Deuff, B. Douchin and L. Quetel. Hydrostatic compression behaviour of steel-composite hybrid tubes. Proceedings of the 17th ICCM, International Conference on Composite Materials, Edinburgh, Scotland. 2009
[ACT287]A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier and Y. Gourinat. Static & Dynamic Testing of Glass Fiber Entangled Sandwich Beams : A Comparison with Honeycomb & Foam Sandwich Beams. Proceedings of International Conference on Composite Structures /15, Porto 2009 [OATAO]
[ACT288]I. Tawk, J.-F. Ferrero, J.-J. Barrau, P. Navarro and S. Lemaire. Etude de l’impact sur pale d’hélicoptère. Proceedings of 16èmes Journées Nationales sur les Composites (JNC 16) 2009
[ACT289]M. Ilyas, F. Lachaud, C. Espinosa, L. Michel and M. Salaün. Modélisation en dynamique rapide du délaminage des composites à l’aide d’éléments finis cohésifs . Proceedings of 16èmes Journées Nationales sur les Composites (JNC 16), 10-12 Juin 2009, Toulouse (FR) 2009 [OATAO]
[ACT290]L. Crouzeix, J.-N. Périé, M. Torres, B. Douchin, F. Collombet and H. Hernandez-moreno. Utilisation de la stéréo corrélation d’images numériques et de la méthode de l’écart à l’équilibre pour la caractérisation mécanique de tubes obtenus par enroulement filamentaire. Proceedings of JNC16 - 16èmes Journées Nationales sur les Composites, Toulouse (France). 2009 [HAL]
[ACT291]D. Guillon, S. Rivallant, J.-J. Barrau, C. Petiot, P. Thevenet and B. Malherbe. Développement d’un modèle de l’écrasement progressif des composites stratifiés en dynamique. Proceedings of JNC 16 - 16èmes Journées Nationales sur les Composites, Toulouse, France, 10-12 Juin 2009
[ACT292]M. Ilyas, C. Espinosa, F. Lachaud and M. Salaün. Simulation of dynamic delamination and mode I energy dissipation. Proceedings of 7th European LS-DYNA Conference, 14-15 Mai 2009, Salzburg (A) 2009 [OATAO]
[ACT293]L. Crouzeix, J.-N. Périé, F. Collombet and B. Douchin. Identification de lois d’endommagement anisotrope à partir de mesures de champs de déplacements - version orthotrope de l’ ”Equilibrium Gap Method”. Proceedings of 9ème colloque national en calcul des structures, Giens (France) p.213-218 2009
[ACT294]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of 3D Cooling Channels in injection molding using DRBEM and Model reduction, . Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT295]B. Cosson, Y. Le Maoult and F. Schmidt. Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method. Proceedings of 12th ESAFORM CONFERENCE ON MATERIAL FORMING 2009
[ACT296]C. Garnier, S. Mistou, J.-N. Felices, P. Hermel, C. Naejus and O. Pantalé. A-ACTI-5. Methodology to predict the influence of process and material parameters on impact response in composite structures. Proceedings of A-ACTI-5. International Conference on Structural Analysis of Advanced Materials 2009
[ACT297]R. Gantois, A. Cantarel, J.-N. Felices, N. Pirc and F. Schmidt. BEM simulation of 3D updated resin front for LCM processes. Proceedings of International Conference on Structural Analysis of Advanced Materials 2009
[ACT298]S. Chevalier, J.-N. Felices and W. Rubio. Detection and reduction of zones of burning in 5-axis machining of wooden parts. Proceedings of International Conference on Structural Analysis of Advanced Materials 2009
[ACT299]Y. Ledru, L. Michel, R. Piquet, F. Schmidt and G. Bernhart. Quantification 2-D et 3-D de la porosité par analyse d’images dans les matériaux composites stratifiés aéronautiques 2-D and 3-D - void quantification with image analyse s in aeronautic composite laminates . Proceedings of JNC 16 2009
[ACT300]L. Mézeix, C. Bouvet, D. Poquillon and S. Crézé. Fibers networks as a new type of core material: processing and mechanical properties. Proceedings of Mrs, San Francisco (usa), 13-17 Avril 2009
[ACT301]L. Mézeix, Y. Ping, C. Bouvet and D. Poquillon. Fiber Networks Made Of Entangled Cross-linked Fibers : Effect Of The Fiber Length And Of Mixing Different Fibers On Compression Properties. Proceedings of 7th Euromech Solid Mechanics Conference, Lisbonne, Portugal, September 2009
[ACT302]J. Bertolini, B. Castanié, J.-J. Barrau and J.-P. Navarro. experimental analysis of pull-out strength of z-pins and screws in carbon-epoxy laminate. Proceedings of 15th International Conference on Composite Structures, ICCS 15, Porto, June 15-17, 2009. 2009
[ACT303]F. Nazaret, O. Barrau and T. Cutard. Damage modelling in a fiber reinforced refractory castable.. Proceedings of UNITECR2009, Bahia (Brasil) 2009
[ACT304]C. Michel and T. Cutard. Microstructure and thermomechanical behaviour of SiC-based refractories.. Proceedings of ECERS2009, Cracovie (Poland) 2009
[ACT305]G. Bernhart, V. Velay and P. Lours. Heat resistant Ni-Cr-Fe steels for superplastic forming dies : from material microstructure to die design. Proceedings of ICSAM 2009 - 10th International Conference on Superplasticity in Advanced Materials - Seattle, USA 2009 [DOI]
[ACT306]F. Berthet and T. Ansart. Calcul du taux de restitution d'énergie en mode II d'une éprouvette cousue. Proceedings of JNC 16-16 émes journées nationales des Composites 2009 [HAL]
[ACT307]N. Lebaal, F. Schmidt, S. Puissant and D. Schläfli. Application of a Response Surface Method to the optimal design of the wall temperature profiles in extrusion die. Proceedings of International Conference on advances in materials and processing technologies (AMPT) 2008
[ACT308]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Analytical and numerical models for drilling of composite materials using twist drill. Proceedings of 7th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2008) – Virtual Concept 2008, Beijing, China, October 8-10, 2008 2008
[ACT309]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill. Proceedings of Aerospace Manufacturing and Automated Fastening (AMAF) SAE International Conference, Detroit, MI, USA, April 14–17, 2008 2008
[ACT310]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Modeling of voids growth mechanisms during manufacturing composites laminates”, . Proceedings of FPCM-9, 9th International Conference on Flow Processes in Composite Material 2008
[ACT311]D. Guillon, S. Rivallant, J.-J. Barrau, C. Petiot, P. Thevenet and N. Pechnik. Initiation and propagation mechanisms of progressive crushing in carbon-epoxy laminated plates. Proceedings of ECCM 13 – 13th European Conference on Composite Materials, Stockholm, Sweden, 2-5 June 2008
[ACT312]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. hrough-the-thickness material properties identification using 3D-DIC and FBG measurements. Proceedings of 13th European Conference on Composite Materials (ECCM13), Stockholm, Sweden, June 2008
[ACT313]J. Toral-vasquez, B. Castanié, J.-J. Barrau and S. Didierjean. Experimental analysis and modeling of z-pinned joints under pull-out loading. Proceedings of ECCM 13, European Conference on Composite Materials, Stockholm, Sweden, 2-5 June 2008 2008
[ACT314]N. Lebaal, F. Schmidt, S. Puissant and D. Schläfli. Optimization of coat-hanger melt distributors for the wire coating process. Proceedings of Proceedings of the Polymer Processing Society 24th Annual Meeting, PPS-24 2008
[ACT315]E. Abi Abdallah, S. Rivallant, C. Bouvet, J.-J. Barrau and J.M. Buchin. A damage model for optimization of impacted CFR composite structures subjected to axial loading. Proceedings of 2nd AI4IA International Conference, Hannover, Germany, 14-15 May 2008
[ACT316]M. Bordival, F. Schmidt and Y. Le Maoult. Optimization of Preform Temperature Distribution for the Stretch-Blow Moulding of PET Bottles”, . Proceedings of 11th ESAFORM CONFERENCE ON MATERIAL FORMING 2008
[ACT317]N. Decultot, V. Velay, L. Robert, G. Bernhart and E. Massoni. Behaviour modelling of aluminium alloy sheet for single point incremental forming. Proceedings of 11th Esaform Conference On Material Forming, Lyon (france) p.1151-1154 2008 [DOI]
[ACT318]N. Decultot, G. Bernhart, L. Robert, V. Velay and E. Massoni. Etude du comportement de tôle d’aluminium embouties par formage incrémental. Proceedings of Colloque MECAMAT 2008, Aussois, France, Janvier 2008
[ACT319]N. Pirc, F. Schmidt, M. Mongeau, F. Bugarin and P. Chinesta. Optimization of BEM-based Cooling Channels Injection Moulding Using Model Reduction. Proceedings of International Journal of Material Forming 2008 [DOI]
[ACT320]O. De Almeida, F. Lagattu and J. Brillaud. Influence of recycling on the deformation mechanisms of automotive impact-modified polypropylene: analysis by 3D DIC. Proceedings of THEPLAC - International Workshop on Thermoplastic Matrix Composites, Ostuni, Italy 2008
[ACT321]L. Mézeix, C. Bouvet, D. Poquillon and B. Castanié. A New Sandwich Structured Composite With Entangled Carbon Fibers As Core Material : Processing And Mechanical Properties. Proceedings of Icss8, Porto (portugal), 6-8 Mai 2008
[ACT322]C. Bouvet, B. Castanié and J.-J. Barrau. Modelling Of Impact Damage In Laminated Composites. Proceedings of Eccm13, Stockholm (suède), 2-5 Juin 2008
[ACT323]L. Mézeix, C. Bouvet and D. Poquillon. Fibers Networks As A New Type Of Core Material : Processing And Mechanical Properties. Proceedings of Fiber Society Fall 2008, Boucherville (canada), 30 Septembre-3 Octobre 2008
[ACT324]V. Velay, T. Cutard and N. Guégan. Thermal behaviour modelling of superplastic forming tools. Proceedings of EuroSPF2008, 7th European Conference on Superplastic Forming, Carcassone (France) 2008
[ACT325]F. Nazaret, O. Barrau and T. Cutard. Fiber reinforced refractory castables dies for SPF toolings : improvements and industrial examples. Proceedings of EuroSPF2008, 7th European Conference on Superplastic Forming, Carcassone (France), 2008
[ACT326]A. Mazzoni and T. Cutard. Thermomechanical behaviour of refractory concretes: effect of a mineral fibre reinforcement. Proceedings of ICC2, Verona (Italy) 2008
[ACT327]T. Kagnaya, C. Boher, L. Lambert, M. Lazard and T. Cutard. Friction at high sliding speed of WC/Co pin versus steel disc: estimation of the contact temperature. Proceedings of ACE-X International Conference, Barcelona, 2008
[ACT328]J. Bertolini, B. Castanié, J.-J. Barrau and J. Navarro. An experimental and numerical study on omega stringer debonding. Proceedings of ICCS-14, 14th International Conference on Composite Structure, 19-21 Novembre 2007, Melbourne, Australia 2007
[ACT329]M. Brinet, A. Barrau, O. Bourrion, J. Bouvier, B. Boyer, M. Buenerd, L. Derome, L. Eraud, R. Foglio, L. Gallin-martel, A. Putze, Y. Sallaz-damaz, J.-P. Scordilis, P. Bhoyar, O. Ganel, J.H. Han, C.H. Kim, M.H. Lee, L. Lutz, A. Malinine, E.S. Seo, P. Walpole, Y.S. Yoon, S.Y. Zinn, R. Bazer-bachi, J.-N. Périé and A. Menchaca-rocha. CHERCAM:. a Cherenkov imager for the CREAM experiment. Proceedings of 10th International Conference on Advanced Technology and Particle Physics p.148-153 2007 [DOI]
[ACT330]P. Olivier, B. Mascaro, P. Marguerès and F. Collombet. Cfrp with voids: ultrasonic characterization of localized porosity, acceptance criteria and mechanical characteristics. Proceedings of ICCM16-16TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Kyoto, Japan 2007
[ACT331]F. Collombet, M. Mulle, H. Hernandez-moreno, B. Douchin, R. Zitoune, P. Olivier and Y.-H. Grunevald. On the use of optical fibres with bragg gratings for the identification of process-properties relations of composite structures. Proceedings of ICCM16 – The 16th International Conference on Composite Materials, Kyoto (Japan) 2007
[ACT332]L. Robert, S. Hmida-maamar, V. Velay and F. Schmidt. Determination of the elongational properties of polymers using a mixed numerical-experimental method. Proceedings of International Conference on Experimental Mechanics (ICEM'13), Alexandroupolis, Greece p.667-668 2007 [DOI]
[ACT333]J. Bertolini, B. Castanié, J.-J. Barrau, S. Alby and J.P. Navarro. Etude du décollement de semelles de raidisseurs par essais de flexion 4 points. Proceedings of NC 15, Marseille 6-8 Juin 2007. 2007
[ACT334]C. Bouvet, J.-J. Barrau and B. Castanié. Modélisation du dommage d’impact à l’aide d’éléments d’interface discrets. Proceedings of JNC 15, Marseille 6-8 Juin 2007. 2007
[ACT335]F. Collombet, M. Mulle, H. Hernandez-moreno, B. Douchin, R. Zitoune, P. Olivier and Y.-H. Grunevald. De l'utilisation des fibres optiques à réseaux de Bragg pour l'établissement de relations procédé-propriétés des structures composites. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.975-982 2007
[ACT336]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Caractérisation d’un matériau HexMC : identification de propriétés mécaniques par l’utilisation de mesures de champs de déplacements et de mesures ultrasonores. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.725-732 2007
[ACT337]H. Hernandez-moreno, B. Douchin, F. Collombet, D. Choqueuse and P. Davies. Monitoring par fibres optiques à réseaux de Bragg de l'enroulement filamentaire de tubes composites. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.773-780 2007
[ACT338]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Identification de propriétés matériau sur éprouvette technologique par croisement des mesures par stéréo-corrélation d’images numériques et réseaux de Bragg avec le modèle numérique associé. Proceedings of 15èmes Journées Nationales sur les Composites (JNC'15), Marseille (France), 6-8 juin 2007
[ACT339]M. Bordival, F. Schmidt, Y. Le Maoult and V. Velay. Simulation of the two stages Stretch-Blow Molding Process. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT340]N. Pirc, F. Schmidt, F. Bugarin and M. Mongeau. Cooling Channel Optimisation for injection molding. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes 2007
[ACT341]N. Lebaal, F. Schmidt and S. Puissant. Optimizations of coat-hanger die, using constraint optimization algorithm and Taguchi method. Proceedings of 9th International Conference on Numerical Methods in Industrial Forming Processes p.537-544 2007
[ACT342]D. Guillon, S. Rivallant, J.-J. Barrau, C. Petiot, P. Thevenet and N. Pechnik. Etude des mécanismes d'absorption d'énergie lors du crash de structures carbone-époxyde. Proceedings of JNC 15 - 15èmes Journées Nationales sur les Composites, 6-8 Juin 2007, Marseille, France 2007
[ACT343]L. Crouzeix, J.-N. Périé, B. Douchin, P. Marguerès, M. Fournié and F. Collombet. Utilisation de champs de déplacements pour l’identification de propriétés élastiques en milieux hétérogènes. Proceedings of 8ème colloque national en calcul des structures, Giens (France) p.241-247 2007
[ACT344]H. Hernandez-moreno, B. Douchin, F. Collombet, D. Choqueuse and P. Davies. Flambage de structures composites tubulaires sous pression externe : Construction de champs par corrélation calculs analytiques - essais. Proceedings of 8ème colloque national en calcul des structures, Giens (France) p.567-572 2007
[ACT345]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Déformations à coeur et en surface sur éprouvette technologique en composite - Essai de flexion 3 et 4 points. Proceedings of 8ème Colloque National en Calcul des Structures, Giens, France, mai 2007
[ACT346]M. Bordival, F. Schmidt and Y. Le Maoult. Numerical Modelling and Optimization of Infrared Heating System for the Blow Moulding Process. Proceedings of 9th ESAFORM CONFERENCE ON MATERIAL FORMING 2007
[ACT347]V. Velay, L. Robert, F. Schmidt, S. Hmida and T. Vallet. Behaviour model identification based on inverse modeling and using optical full field measurements (offm): application on rubber and steel. Proceedings of 10th Esaform Conference On Material Forming p.33-38 2007 [DOI]
[ACT348]E. Abi Abdallah, S. Rivallant, C. Bouvet, J.-J. Barrau and J.-M. Buchin. The Influence Of Composite Tube Damage Tolerance On Compressive Residual Strength : Experimental Observation. Proceedings of 1st Ai4ia International Conference, Ostravice, Czech Republic, 19-23 February 2007
[ACT349]O. De Almeida, F. Lagattu, L. Chocinski-Arnault and J. Brillaud. Etude de l’influence du recyclage et de la pollution à l’huile sur les mécanismes de déformation de polypropylènes-chocs par mesures de champs de déformation tridimensionnels. Proceedings of JNC 15 - 15èmes Journées Nationales sur les Composites, Marseille, France. 2007
[ACT350]M. Bizeul, C. Bouvet, J.-J. Barrau and R. Cuenca. Influence Of Woven Ply Degradation On Fatigue Crack Growth In Thin Notched Composites Under Tensile Loading. Proceedings of Icfc4, Kaiserslautern (allemagne), 26-28 Septembre 2007
[ACT351]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core Crush Criteria To Determine The Strength Of Sandwich Composite Structures Subjected To Compression After Impact. Proceedings of Iccs-14, Melbourne (australia), 19-21 Novembre 2007
[ACT352]P. Olivier, P. Marguerès, B. Mascaro and F. Collombet. Porosités dans les stratifiés carbone/polymère : critère d’admissibilité et modélisation des propriétés mécaniques. Proceedings of JNC15 - 15èmes Journées Nationales sur les Composites, Marseille (France) p.73-80 2007
[ACT353]B. Castanié, Y. Aminanda, C. Bouvet and J.-J. Barrau. Core crush criteria to determine the strength of sandwich composite structures subjected to compression after impact. Proceedings of ICCS-14, 14th International Conference on Composite Structure, 19-21 Novembre 2007, Melbourne, Australia 2007
[ACT354]Y. Aminanda, B. Castanié and J.-J. Barrau. Behavior of Indented Sandwiches Structure with Nomex Honeycomb Core and Metallic Skins Subjected to Compressive Loading (CAI).. Proceedings of 10th International Conference on the Mechanical Behavior of Materials, 27-30 Mai 2007, Busang, Korea 2007
[ACT355]M. Mulle, R. Zitoune, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de déformation à coeur sur éprouvette technologique durant la cuisson autoclave puis des essais de flexion 3 et 4 points. Proceedings of 1er Congrès Méditerranéen sur les Matériaux Composites (C2MC1), Béchar, Algérie, décembre 2006
[ACT356]P. Rahmé, Y. Landon, P. Lagarrigue, R. Piquet, F. Lachaud, B. Marguet, J. Bouriquet and C. Leroy. Drilling of thick composite structures – State of the art. Proceedings of Aerospace Manufacturing and Automated Fastening (AMAF) SAE International Conference, Toulouse, France, September 12–14, 2006 2006
[ACT357]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. Structural testing on a multi instrumented filament winding pipe: towards the identification of mechanical properties. Proceedings of ECCM12 - The 12th European Conference on Composite Materials, Biarritz (France) 2006
[ACT358]P. Olivier, P. Marguerès, B. Mascaro, K.E. Tarsha-kurdi and F. Collombet. Assessment of the effects of voids on some physical, mechanical and damage mechanics properties of carbon/polymeric composites.. Proceedings of ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006
[ACT359]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Multi-scale experimental and numerical analysis of inserts in sandwich structures. Proceedings of ECCM 12, European Conference on Composite Materials, Biarritz, France, 29 Aout-1 Sept 2006. 2006
[ACT360]B. Castanié, C. Bouvet, J.-J. Barrau and P. Thevenet. Multi-level modeling of low velocity, low energy impact on metal-skinned sandwich structure.. Proceedings of ESDA 2006 Engineering Systems Design and Analysis, Torino, Italy, 4-7 July 2006. 2006
[ACT361]S. Marguet, P. Rozycki and L. Gornet. A Rate Dependent Constitutive Model for Carbon-Fibre/Epoxy-Matrix Woven Fabrics Submitted to Dynamic Loadings. Proceedings of III European Conference on Computational Mechanics p.75 2006
[ACT362]L. Crouzeix, H. Hernandez-moreno, J.-N. Périé, B. Douchin, L. Robert and F. Collombet. On the identification of mechanical properties using structural tests and optical methods. Proceedings of SEM 2006 – annual conference of the Society for Experimental Mechanics, St. Louis, Missouri (USA) 2006
[ACT363]V. Velay, G. Bernhart and D. Delagnes. Identification and validation of a continuum damage model applied for the lifetime prediction of h11 tool steel. Proceedings of 7th International Tools 06 Conference, Torino Italie 2006 [DOI]
[ACT364]E. Paroissien, M. Sartor, J. Huet and F. Lachaud. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts: Analytical Two-Dimensional Model of a Hybrid (Bolted/Bonded) Single-Lap Joint. Proceedings of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference (47th SDM AIAA) 2006
[ACT365]G. Gohorianu, F. Lachaud, R. Piquet and J.J. Barrau. Composite joints behaviour : effects of hole machinnig defects. Proceedings of Joining Plastic 2006 2006
[ACT366]N. Lebaal, S. Puissant and F. Schmidt. Optimization of 3D die extrusion using response surface method. Proceedings of 9th International Conference on Material Forming ESAFORM p.703-706 2006
[ACT367]M. Bordival, F. Schmidt, Y. Le Maoult and E. Coment. Measurement of Thermal Contact Resistance Between The Mold And The Polymer For The Stretch-blow Molding Process. Proceedings of 10th ESAFORM CONFERENCE ON MATERIAL FORMING 2006
[ACT368]S. Petit, A. Bergerot, C. Bouvet and J.-J. Barrau. Compression After Impact Of Composite Structures With Thermal Shield. Proceedings of 12th Eccm, Biarritz (france), 29 Août-1er Septembre 2006
[ACT369]O. De Almeida, F. Lagattu, L. Chocinski-Arnault and J. Brillaud. Comment utiliser un polypropylène-choc issu de boucliers automobiles : conséquences microstructurales et mécaniques du recyclage et de la pollution. Proceedings of Matériaux 2006, Dijon, France 2006
[ACT370]A. Carpentier, L. Michel, S. Grihon and J.-J. Barrau. Buckling optimization of composite panles via lay-up tables. Proceedings of III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, 2006
[ACT371]P. Marguerès, P. Olivier, B. Mascaro and F. Collombet. Critère d'admissibilité des porosités dans des composites carbone/époxyde. Proceedings of C2MC1-1er Congrès Méditerranéen sur Les Matériaux Composites, Béchar, Algérie 2006
[ACT372]Z. Ahmer, V. Velay, G. Bernhart and F. Rezaï-aria. Cyclic behaviour simulation of x38crmov5-47hrc (aisi h11)-tempered martensitic hot-work tool steel . Proceedings of Proceedings Of 7th International Tools 06 Conference, Torino Italie p.326-335 2006 [DOI]
[ACT373]N. Lebaal, S. Puissant and F. Schmidt. Identification des paramètres rhéologique à l'aide d'une méthode d'optimisation appliquée à l'extrusion en 3D. Proceedings of XVIIe Congrès Français de Mécanique 2005
[ACT374]L. Robert, F. Nazaret, H. Marzagui, T. Cutard and J.-J. Orteu. Étude du comportement endommageable de bétons réfractaires par stéréocorrélation d'images numériques. Proceedings of Congrès Français de Mécanique, Troyes (France), 29 août - 2 septembre 2005
[ACT375]M. Guichon, C. Boher and F. Schmidt. An Understanding of Polymer/Mold Contact during Injection Moulding Cycle. Proceedings of PPS-2005: America Regional Meeting 2005
[ACT376]M. Bordival, F. Schmidt, Y. Le Maoult and C. Champin. Optimisation of infrared heating system for thermoforming and blow molding processes. Proceedings of PPS-2005: America Regional Meeting 2005
[ACT377]G. Dusserre, F. Schmidt, G. Dour and G. Bernhart. Thermo-mechanical stresses in cast steel dies during glass pressing process. Proceedings of 8th International Conference on Advances in Materials and Processing Technologies 2005
[ACT378]N. Lebaal, S. Puissant and F. Schmidt. Rheological parameters identification using in-situ experimental data of a flat die extrusion . Proceedings of 8th International Conference on advances in materials and processing technologies 2005
[ACT379]C. Champin, M. Bellet, F. Schmidt, J.-F. Agassant and Y. Le Maoult. 3D Finite Element Modelling of the Stretch Blow Moulding Process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING p.905-908 2005
[ACT380]S. Andrieu, F. Schmidt, Y. Le Maoult and S. Monteix. Optimisation of Infrared Heating for the thermoforming process. Proceedings of 8th ESAFORM CONFERENCE ON MATERIAL FORMING 2005
[ACT381]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Analyse de l’architecture du renfort des tubes réalisés par enroulement filamentaire. Proceedings of JNC14 - 14èmes Journées Nationales sur les Composites, Compiègne (France) p.119-127 2005
[ACT382]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Etude expérimentale et numérique du comportement des inserts de structures sandwichs à l'arrachement. Proceedings of JNC 14, Compiègne 22-24 Mars 2005 2005
[ACT383]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Etude expérimentale et numérique de la compression après impact de structures sandwichs à peaux métalliques. Proceedings of JNC 14, Compiègne 22-24 Mars 2005 2005
[ACT384]S. Rivallant, J.-F. Ferrero, J.-J. Barrau, S. Lemaire and I. Tawk. Etude de l'impact sur pale d'hélicoptère. Proceedings of JNC 14 - 14èmes Journées Nationales sur les Composites, Compiègne, France, 22-24 Mars 2005
[ACT385]M. Mulle, J.-N. Périé, L. Robert, F. Collombet and Y.-H. Grunevald. Instrumentations combinées (fibres optiques à réseaux de Bragg et corrélation d'images numériques) pour l’analyse multi-échelle du comportement de démonstrateurs technologiques. Proceedings of 14èmes Journées Nationales sur les Composites (JNC 14), Compiègne, France, mars 2005
[ACT386]P. Marguerès, J.-N. Périé, Julian Perez, F. Collombet and Y.-H. Grunevald. Caractérisation d'une structure composite obtenue par RFI à partir d'un nouveau matériau. Proceedings of JNC 14 - 14èmes Journées Nationales sur les Composites, Compiègne, France 2005
[ACT387]M. Roosefid, E. Ouedraogo, H. Marzagui, T. Cutard, N. Prompt and C. Deteuf. Thermomechanical behavior of two refractory castables. Proceedings of UNITECR05 - Orlando (USA) 2005
[ACT388]P. Marguerès, J. Lopez Torres, P. Olivier and F. Collombet. Méthodologie de caractérisation des structures composites obtenues par RFI. Proceedings of Journée Scientifique et Technique (JST) "Mise en forme des matériaux composites", Le Havre, France 2004 [DOI]
[ACT389]S. Monteix, Y. Le Maoult and F. Schmidt. Quantitative Infrared Thermography applied to blow moulding process: measurement of a heat transfer coefficient. Proceedings of QUIRT 2004 2004
[ACT390]S. Andrieu, F. Schmidt and Y. Le Maoult. Infrared heating modelling of thermoplastic sheet during thermoforming process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT391]C. Champin, J.-F. Agassant, M. Bellet, F. Schmidt and Y. Le Maoult. 3D Finite Element Modelling of the Stretch-Blow Moulding Process. Proceedings of 20th International Conference of Polymer Processing Society 2004
[ACT392]E. Mathey, L. Penazzi, F. Ronde-oustau and F. Schmidt. Automatic optimization of the cooling of injection mould based on the boundary element method. Proceedings of 8th International Conference on Numerical Methods in Industrial Forming Processes 2004
[ACT393]H. Hernandez-moreno, B. Douchin, F. Collombet and P. Davies. Precise positioning of unit cells and embedded instrumentation for fabrication and pressure testing of filament wound tubes. Proceedings of ECCM11 - The 11th European Conference on Composite Materials, Rhodes (Greece) 2004
[ACT394]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Experimental and numerical analysis of inserts in sandwich structures. Proceedings of SEM X International congress, Costa Mesa, California, June 7-10 2004 2004
[ACT395]P. Bunyawanichakul, B. Castanié and J.-J. Barrau. Etude phénoménologique du comportement des inserts de structures sandwichs à l’arrachement.. Proceedings of Colloque PHOTOMECA 2004, Ecole des Mines d’Albi-Carmaux, 5-6 Mai 2004 2004
[ACT396]S. Andrieu, F. Schmidt and Y. Le Maoult. Mesures infrarouges appliquées à la modélisation du thermoformage EMAC. Proceedings of Colloque photomécanique 2004 p.177-184 2004
[ACT397]M. Mulle, L. Robert, J.-N. Périé and F. Collombet. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation de métrologies. Proceedings of Colloque Photomécanique 2004, Albi, France 2004
[ACT398]S. Petit, A. Bergerot, C. Bouvet and J.-J. Barrau. Damage Tolerance For Composite Structures Of Launchers: Influence Of A Thermal Shield. Proceedings of 55th Iac, Vancouver (canada), 4-8 Octobre 2004
[ACT399]T. Branza, A. Martinier, A. Duchosal, F. Deschaux Beaume, G. Bernhart and P. Lours. Fatigue damage and weld repair of heat resistant cast steel SPF dies. Proceedings of Proceedings of the third European Conference on Superplastic Forming, EURO-SPF04, Ed. by G. Bernhart, T. Cutard & P. Lours, Albi, France, July 2004 2004
[ACT400]C. Gao, G. Bernhart and P. Lours. Damages induced by thermomechanical cycles in superplastic forming tools . Proceedings of Proceedings of the 7th Asia-Pacific Symposium on Engineering Plasticity and Its Application AEPA’04 Shanghai, China, september 2004 2004
[ACT401]H. Marzagui, T. Cutard, E. Yeugo-fogaing, M. Huger, C. Gault, N. Prompt and C. Deteuf. Microstructural changes and high temperature mechanical behavior of an andalusite based low cement refractory castable. Proceedings of Advances in Refractories for the Metallurgical Industries IV, COM2004 – Hamilton (Canada) 2004
[ACT402]H. Marzagui, T. Cutard, M. Roosefid, E. Ouedraogo, N. Prompt and C. Deteuf. Room temperature mechanical behavior of two refractory castables. Proceedings of Advances in Refractories for the Metallurgical Industries IV, COM2004 – Hamilton (Canada) 2004
[ACT403]F. Nazaret, T. Cutard and G. Bernhart. Thermomechanical behaviour of a fibre-reinforced refractory concrete: tests and analysis. Proceedings of Sixth RILEM Symposium on Fibre-Reinforced Concretes, Varenna (Italie), Septembre 2004. 2004
[ACT404]F. Nazaret, T. Cutard and G. Bernhart. Mechanical behavior of ceramic materials for SPF toolings. Proceedings of EuroSPF04, European Conference on Superplastic Forming 2004 – Albi (France) - 2004
[ACT405]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Experimental analysis and modelling of honeycomb cores crush. Proceedings of SEM X International congress, Costa Mesa, California, June 7-10 2004 2004
[ACT406]A. Khazaeian, P. Larricq and J.-N. Felices. Deliberation on measurement conditions of surface quality of machined wood using laser optical profilometry. Proceedings of 2nd Int. Symposium on Wood Machining p.351-358 2004
[ACT407]S. Didierjean, L. Michel, J.-J. Barrau and E. Paroissien. Predicting the Behavior of Graphite/Epoxy Laminates under Hydrothermal Loads. Proceedings of EUROMECH453 2003
[ACT408]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Impacts on foam stabilised composite structures: experimental and numerical study.. Proceedings of EURODYMAT 2003, Porto, Portugal, 8-10 September p.645-650 2003 [DOI]
[ACT409]S. Andrieu, F. Schmidt and Y. Le Maoult. Heat conditioning modelling of thermoforming process: comparison with experiments. Proceedings of 19th International Conference of Polymer Processing Society 2003
[ACT410]Y. Aminanda, B. Castanié, J.-J. Barrau, P. Thevenet and D. Guedra-degeorges. Etude expérimentale et modélisation de l’impact des structures sandwichs à âme nid d'abeille. Proceedings of CSMA 2003, 6ème Colloque National en Calcul des Structures 20-23 mai 2003, Presqu’île de Giens (Var) 2003
[ACT411]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Buckling of foam stabilised composite structures. Proceedings of 5th International Symposium on Advanced Composites, Corfu, Greece, 5-7 may 2003
[ACT412]E. Mathey, L. Penazzi, F. Schmidt and F. Ronde-oustau. Numerical Simulations of Polymer Cooling in Laminated Injection Moulds. Proceedings of 6th ESAFORM 2003
[ACT413]E. Jourdain, F. Schmidt, G. Saint-martin and E. Haramburu. Fiber Orientation of Meldlines in Injection Molding of Short Fiber Reinforced Thermoplastic: A quantitative Comparison of Experimental and Numerical Results. Proceedings of 6th ESAFORM 2003
[ACT414]S. Rivallant, J.-F. Ferrero and J.-J. Barrau. Flambement de structures composites stabilisées par une mousse. Proceedings of JNC 13 - 13èmes Journées Nationales sur les Composites, Strasbourg, France, 12-14 Mars p.243-253 2003
[ACT415]Y. Aminanda, B. Castanié, J.-J. Barrau and P. Thevenet. Etude expérimentale et modélisation de l’indentation des structures sandwichs à âme nid d'abeille. Proceedings of JNC 13, Strasbourg, 12-14 Mars 2003. 2003
[ACT416]G. Bernhart, F. Nazaret, A. Martinier, C. Gao, D. Garriga Majo, T. Cutard and P. Lours. Design of SPF dies based on advanced material behaviour models. Proceedings of International Conference on Superplasticity of Advanced Materials ICSAM 2003, Oxford, UK, July 2003 2003
[ACT417]H.V. Bui, P. Lours, G. Bernhart, B. Le Razer and P. Barcq. L'outillage rapide: nouvelle technologie de fabrication rapide de pièces et d’outillage par frittage de poudre - Analyse technique et scientifique. Proceedings of Actes du colloque PMF 2003, Commission poudres et matériaux frittés de la SF2M-GFC « De la poudre au matériau massif» Albi, Ecole des Mines, Juin 2003 2003
[ACT418]H.V. Bui, P. Lours and G. Bernhart. Influence of porosity and anisotropy on the mechanical properties of direct laser sintered metal powder for injection moulding tools. Proceedings of Proceedings of the 4th International Conference on Industrial Tools Bled, Slovenia, April 2003 2003
[ACT419]J. Blachère, R. Peraldi, D. Monceau, T. Cutard and B. Pieraggi. Orientation relation between Ni and NiO and its evolution during oxide growth. Proceedings of ECS 2003 (Electrochemical Society) – Paris – Mai 2003. 2003
[ACT420]Y. Aminanda, B. Castanié, J.-J. Barrau, P. Thevenet and D. Guedra-degeorges. Etude expérimentale et modélisation du comportement en compression de structures nid d'abeille. Proceedings of Colloque IME 2002, Besançon, 3-5 Juillet 2002. 2002
[ACT421]G. Saint-martin, F. Schmidt, P. Devos and C. Levaillant. Advanced controls and measurements for the injection molding of a short fiber reinforced polymer. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT422]D. Garcia, J.-J. Orteu, T. Cutard and L. Robert. Application of stereovision to the mechanical characterization of refractory ceramics reinforced with metallic fibres. Proceedings of SEM 2002 Conference on Experimental and Applied Mechanics, Milwaukee, USA, 10-12 June 2002 2002
[ACT423]S. Andrieu, Y. Le Maoult and F. Schmidt. Infrared Heating Modeling of Thermoplastic Sheets in Thermoforming Process. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT424]I. Busuladzic, F. Schmidt and P. Lafleur. Dispersive prediction of single-screw extruder with mixing head using Boundary Element Method. Proceedings of 18th International Conference of Polymer Processing Society 2002
[ACT425]E. Haramburu, F. Collombet, B. Ferret, J.-S. Vignes, P. Devos, C. Levaillant and F. Schmidt. Short-fibre Reinforced Thermoplastic for Semi-structural Parts: Process-properties. Proceedings of 8th Euro-Japanese Symposium 2002
[ACT426]V. Velay, A. Persson, G. Bernhart, L. Penazzi and J. Bergström. Thermal fatigue of a tool steel: experiment and numerical simulation. Proceedings of 6th International Tooling Conference: The Use Of Tool Steels: Experience And Research p.667-685 2002
[ACT427]G. Bernhart, S. Baleix, P. Lours and T. Cutard. Thermomechanical behaviour and characterisation of SPF tooling materials. Proceedings of Second European Conference on Superplastic Forming, EURO-SPF02 Bristol, UK, June 2002 2002
[ACT428]G. Bernhart, S. Baleix and P. Lours. Fissuration et écaillage de couches d’oxyde lors de cycles thermiques . Proceedings of Journée thématique du groupe de travail «Interfaces dans les milieux solides»-Colloque Mécamat ONERA Châtillon, France, Janvier 2002 2002
[ACT429]F. Schmidt and Y. Le Maoult. Modeling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process. Proceedings of International Conference on Advances in Materials And Processing Technologies 2001
[ACT430]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Comparison Between a Numerical Model and an Experimental Approach of Preform Infrared Radiative Heating. Proceedings of CHT’01 (International Symposium on Advances in Computational Heat Transfer) p.1017-1024 2001
[ACT431]S. Monteix, F. Schmidt, Y. Le Maoult, G. Denis and M. Vigny. Recent Issues In Preform Radiative Heating Modelling. Proceedings of 17th International Conference of Polymer Processing Society 2001
[ACT432]D. Garcia, B. David, J.-J. Orteu, T. Cutard and E. Cailleux. Application de la stéréovision à l'étude du comportement de bétons renforcés de fibres métalliques. Proceedings of Colloque Photomécanique 2001, Futuroscope, Poitiers (France), 24-26 avril 2001 2001
[ACT433]T. Cutard, E. Cailleux and G. Bernhart. Pullout of metallic fibres from a ceramic refractory matrix. Proceedings of International Conference on Interface Phenomena in Composite Material (IPCM2001) – Arcachon (France) 2001
[ACT434]T. Cutard, E. Cailleux and G. Bernhart. Ceramic materials : alternative materials for SPF tooling. Proceedings of First European Conference on the Superplastic Forming Process (EuroSPF01) – Villars de Lans (France) 2001
[ACT435]M. Rachik, F. Schmidt, N. Reuge, Y. Le Maoult and F. Abbé. Elastomer Biaxial Characterization, Experimental an Numerical Investigations . Proceedings of Eccomas 2000 2000
[ACT436]S. Monteix, F. Schmidt and Y. Le Maoult. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF PREFORM INFRARED RADIATIVE HEATING . Proceedings of Quantitative Infrared Thermography, QIRT’2000 2000 [DOI]
[ACT437]F. Schmidt, S. Monteix and Y. Le Maoult. Analysis of influent parameters during infrared radiative heating of PET preform. Proceedings of 16th International Conference of Polymer Processing Society 2000
[ACT438]J. Noirot, J.-J. Barrau, J.-F. Ferrero and B. Castanié. Analyse d’inserts pour les structures sandwichs composites.. Proceedings of Colloque GAMI "Composites 2000", 7 et 8 Mars 2000. 2000
[ACT439]B. Castanié, J.-J. Barrau and J.-P. Jaouen . Structural analysis of asymetric sandwich beams with compressible core.. Proceedings of Fith International Conference on Sandwich Construction, ETH, Zurich 2000 2000
[ACT440]S. Monteix, F. Schmidt, Y. Le Maoult, R. Ben Yedder, R. Diraddo and D. Laroche. Experimental Study and Numerical Simulation of Preform or Sheet Infrared Radiative Heating. Proceedings of AMPT ‘99 1999
[ACT441]S. Baleix, S. Le Roux, G. Bernhart and P. Lours. Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles. Proceedings of International Conference on Advances in Materials and Processing Technologies AMPT 99 p.1175-1184 1999
[ACT442]B. Castanié, F. Beltrando and J.-P. Jaouen . ANALYSE NON LINEAIRE GEOMETRIQUE DE POUTRES SANDWICHS DISSYMETRIQUES. Proceedings of Congrés français de Mécanique, Toulouse, 1999 1999
[ACT443]F. Schmidt, N. Reuge, Y. Le Maoult, J.-P. Arcens, B. David and F. Abbé. Inflation Technique Optimization for an Elastomer Biaxial Characterization. Proceedings of 15th International Conference of Polymer Processing Society 1999
[ACT444]G. Bernhart, P. Lours, F. Rézaï-aria and C. Levaillant. Effet de la thermique transitoire sur l’endommagement des outillages dans les procédés de formage . Proceedings of Actes des journées de la Société Française des Thermiciens (SFT) sur la thermique de la machine outil et de l’usinage, Bordeaux (France), 20 janvier, 1999 1999
[ACT445]Y. Le Maoult, S. Baleix, P. Lours and G. Bernhart. Application industrielle de la thermographie infrarouge au comportement des outillages de formage superplastique . Proceedings of Actes des journées du GAMI du CETIM sur les applications de la thermographie dans les industries mécaniques, Senlis (France), 22-23 juin, 1999 1999
[ACT446]S. Baleix, P. Lours and G. Bernhart. High temperature mechanical behaviour of NiCrFe heat resistant cast steel . Proceedings of Proceedings of the 8th International Conference on Mechanical Behaviour, Victoria (Canada), 1999 1999
[ACT447]S. Baleix, Y. Le Maoult, S. Frenois, Y. Marcel, P. Lours and G. Bernhart. Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool . Proceedings of Proceedings of the 3rd international Congress on Thermal Stresses, edited by J.J. Skrzypek and R.B. Hetnarski, Cracow (Poland), 317, 1999 p.317 1999
[ACT448]S. Monteix, R. Diraddo, F. Schmidt and Y. Le Maoult. Profiled infrared radiative heating in blow moulding and thermoforming. Proceedings of PPS’98 - North American Meeting p.147-148 1998
[ACT449]F. Schmidt, F. Berthet, P. Devos and P. Lafleur. Numerical simulation of RTM using boundary element method. Proceedings of 6th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 98) p.453-457 1998
[ACT450]F. Deschaux-beaume, N. Fréty, T. Cutard and C. Levaillant. Oxidation of Si3N4-TiN composites in air F.Deschaux-Beaume. Proceedings of CIMTEC'98-World Ceramics Congress & Forum on New Materials–Florence (Italie) 1998
[ACT451]N. Khemiri, L. Michel, F. Lachaud and E. Ramahefarison. Study of the temperature effect on the matrix cracking in carbon/epoxy cross-ply laminates under cyclic loading. Proceedings of ECF12: Fracture from Defects, Vols. I-III p.1405-1410 1998
[ACT452]B. Castanié, J.-J. Barrau, S. Crézé and J.-P. Jaouen. Experimental analysis of assymetric sandwich plates under compression, shear and combined loadings.. Proceedings of Fourth International Conference on Sandwich Construction, Stockholm 1998. 1998
[ACT453]Y. Le Maoult, F. Schmidt, M. El Hafi and P. Lebaudy. Measurement and Calculation of Preform Infrared Heating a first approach. Proceedings of 4th International Workshop on Advanced Infrared Technology and Applications p.321-331 1997
[ACT454]F. Decla, S. Le Roux, G. Bernhart, C. Levaillant and N. Fréty. Plasma sprayed electrical conductive coating on C.F.R.P. materials : microstructure and electrical properties. Proceedings of 11th International Conference on Surface Modification Technologies p.293-299 1997
[ACT455]F. Berthet, P. Devos and T. Ansart. RTM CARBON COMPOSITES: INFLUENCE OF PROCESS PARAMETERS ON COMPRESSION STRENGTH AFTER IMPACT. Proceedings of ICCM–11, Gold Coast, Australia, 14th-18th July 1997 p.II-27-35 1997
[ACT456]F. Benyahia, L. Michel and Y. Gourinat. Approche Expérimentale et Numérique de l’amerrissage d’une capsule spatiale de type CTV-ARD. Proceedings of 16th Canadian Congress of Applied Mechanics, Montréal 1997
[ACT457]F. Lachaud, N. Khemiri, Y. Gourinat and L. Michel. Orientation des fibres dans les matrices organiques et propagation du délaminage en mode I. Proceedings of 16th Canadian Congress of Applied Mechanics, Montréal 1997
[ACT458]F. Schmidt, J.-F. Agassant and M. Bellet. Experimental Study of the injection stretch/blow molding process. Proceedings of ANTEC ‘97, Society of Plastics Engineers 1997
[ACT459]V. Laborde, M. El Hafi, Y. Le Maoult and F. Schmidt. 11) V. Laborde , M. , P. Lebaudy, Y. Le Maoult, F. M. Schmidt, “Modélisation du chauffage infra rouge de préformes”. Proceedings of Société Française des Thermiciens ‘97 p. 699-706, 1997
[ACT460]B. Castanié, J.-J. Barrau, S. Crézé and J.-P. Jaouen. Theoritical and experimental analysis of dissymetric sandwich plates with compressible core. Proceedings of Euromech 360 Colloquium, Saint-Etienne 1997. 1997
[ACT461]F. Deschaux-beaume, F. Schmidt, N. Fréty, T. Cutard, J.-C. Boyer and C. Levaillant. Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results. Proceedings of International Conference "Advances in Materials and Processing Technologies '97" - Guimaraes (Portugal). 1997
[ACT462]F. Berthet, P. Devos and T. Ansart. Demonstrating the need of taking into account the compatibility tackifier/resin, and processing conditions to control mechanical properties of RTM CFRP. Proceedings of ANTEC 97 Toronto p.10p 1997
[ACT463]F. Lachaud, B. Lorrain, L. Michel and R. Barriol. Etude expérimentale et numérique du délaminage par flambage localisé de matériaux composites à matrices thermoplastiques et thermodurcissables. Proceedings of 10 ème Journées Nationales sur les Composites, Paris 1996
[ACT464]F. Schmidt, J.-F. Agassant and M. Bellet. Analytic Models for the Simultaneous Inflation and Extension of a Polymeric Tube. Proceedings of 12th International Conference of Polymer Processing Society 1996
[ACT465]F. Lachaud, L. Michel and R. Barriol. Etude numérique du délaminage par flambage localisé de composites carbone à matrices organiques. Proceedings of STRUCOME-95, Paris 1995
[ACT466]F. Berthet, P. Devos and T. Ansart. Méthode des plans d'expériences appliquée à l'étude de la mise en oeuvre par Resin Transfer Molding (RTM). Proceedings of JEPO 23 - 23èmes journées d'études des polymères 1995
[ACT467]F. Lachaud, B. Lorrain, L. Michel and R. Barriol. Acoustic Analysis of Delamination propagation of CFRP cross-ply laminates under static and cyclic loadings. Proceedings of Fifth International Symposium on Acoustic Emission from Composite Material (AECM-5), Suède p.23-31 1995
[ACT468]F. Benyahia, L. Michel and Y. Gourinat. Étude Expérimentale du Flambage Dynamique de Plaques Métalliques et Composites. Proceedings of 15th Canadian Congress of Applied Mechanics, Victoria 1995
[ACT469]P. Casu, M. Febrer, Y. Gourinat and L. Michel. Single Curvature Composite Shell under Transverse Static Load. Delamination Criterion. Proceedings of 15th Canadian Congress of Applied Mechanics, Victoria 1995
[ACT470]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Viscoelastic Simulation of P.E.T Stretch/Blow Molding Process. Proceedings of 10th International Conference of Polymer Processing Society p.313-314 1994
[ACT471]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Viscoelastic Simulation of P.E.T Stretch/Blow Molding. Proceedings of 9th International Conference of Polymer Processing Society p.335-336 1993
[ACT472]F. Collombet and C. Espinosa. Simulation of through matrix cracking damage history sustained by laminated composite plates during transverse impact. Proceedings of ISIE Sendai 2-4 Novembre 1992 p.412-417 1992
[ACT473]F. Schmidt, J.-F. Agassant, M. Bellet and G. Denis. Numerical Simulation of Polyester Stretch/Blow Molding Process. Proceedings of 4th International Conference on Numerical Methods in Industrial Forming Processes p.383-388 1992
[ACT474]C. Espinosa, F. Collombet and J.-L. Lataillade. Simulation of matrix cracking damage history sustained of laminated composite plates during transverse impact. Proceedings of ECCM 5 Bordeaux, 7-10 April 1992 p.83-88 1992
[ACT475]C. Espinosa, F. Collombet and J.-L. Lataillade. Endommagement de composites unidirectionnels par fissuration d'impact. Proceedings of 10ème Congrès Français de Mécanique, Paris, 2-6 septembre 1991 1991

Communication sans actes dans un congrès international ou national

[COM1]J.-E. Chambe, O. Dorival, C. Bouvet and J.-F. Ferrero. Crash de structures composites tubulaires et absorption d’énergie pour le développement de sièges aéronautiques. Journées de la Recherche à l'Icam, Nantes, France, 28-29 nov. 2017 2017
[COM2]T. Baumard, O. De Almeida, G. Menary, F. Schmidt and J. Bikard. Simulation de la mise en forme de tissus préimprégnés par thermoformage. JST Mise en Oeuvre des Composites à Matrice Thermoplastique 2017
[COM3]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Comportement en matage de composites à matrice céramique oxyde/oxyde. JA 2016 SF2M 2016
[COM4]S. Boztepe, O. De Almeida, Y. Le Maoult and F. Schmidt. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM5]F. Schmidt and Y. Le Maoult. Infrared Radiation applied to Blow Molding Process. 32nd International Conference of the POLYMER PROCESSING SOCIETY 2016
[COM6]G. Androuin, L. Michel, X. Gong and I. Maillet. Fatigue load ratio and load amplitude effect on crack propagation under mode I loading. SF2M, 35ème Journées de Printemps, mai 2016
[COM7]F. Chatti, C. Bouvet, D. Poquillon, G. Michon and L. Meizeix. Numerical Modeling of porous materials made with entangled fibers network. Euromech 569 - Chatenay-Malabry - France 2016
[COM8]F. Tostain, C. Espinosa and S. Rivallant. Modélisation des ruptures et fragmentations dynamiques de stratifiés composites en écrasement. MécaDymat "Comportement et rupture des matériaux sous sollicitations dynamiques", Strasbourg (France), 30-31 Mars 2016 2016
[COM9]G. Bernhart, V. Velay and T. Cutard. Moules pour formage superplastique du titane : matériaux, propriétés et conception. Moules et Outils 2015 2015
[COM10]F. Pascal, P. Navarro, S. Marguet, O. Dorival and J.-F. Ferrero. Modelling impacts on composite sandwich structures using a semi-continuous strategy. 2015 Franco-Chinese symposium on damage and fracture of composite structures: assessment and monitoring 2015
[COM11]F. Collombet, L. Crouzeix, Y.-H. Grunevald, A. Cerisier, R. Zitoune, Y. Davila and B. Douchin. Repair of primary composite structures - a challenge in aeronautics for the composite solution. Franco-Chinese Symposium on Damage and Fracture of Composite Structures: Assessment and Monitoring, Tarbes (France), July 14 - 17 2015
[COM12]O. Dorival, P. Navarro, S. Marguet, J.-F. Ferrero, C. Petiot and M. Bermudez. Comparisons of performances of several new designs of shock absorbers. 18th International Conference on Composite Structures - ICCS18 2015
[COM13]J. Bouillonnec, G. Bernhart, M. Pinault, P. Olivier and M. Mayne L'hermite. Thermal conductivity enhancement of vertically aligned nanotube carpet reinforced thermoset composites. ICCS18 - 18th International Conference on Composite Structures 2015
[COM14]E. Paroissien, A. Da Veiga, S. Schwartz, G. Lelias and F. Lachaud. Modélisation Simplifiée de Liaisons Collées à l’Aide de la Technique par Macro-Element. Revue des Développements Réalisés depuis 2004. Forum TERATEC 2015
[COM15]I. Maillet and L. Michel. Fatigue delamination propagation at high frequency of a CFRP UD material. 6th Internationational Conference on Fatigue of Composite, Paris, March 25-27 2015
[COM16]F. Soulas, C. Espinosa, F. Lachaud, Y. Duval, S. Guinard, B. Lepetit and I. Revel. Design of Mechanical Impact tests equivalent to lightning strikes. Journées Thématiques DynRap 'Etudes de phénomènes en dynamique rapide par essais et simulations', DGA- Techniques aeronautiques, Toulouse (France) 2015
[COM17]F. Tostain, C. Espinosa and S. Rivallant. Modèles d'écrasement localisé et d'endommagement diffus pour la simulation du crash de structures composites. Journées Thématiques DynRap 'Etudes de phénomènes en dynamique rapide par essais et simulations', DGA - Techniques aeronautiques, Toulouse, France, 25-26 mars 2015
[COM18]M.Q. Thai, F. Schmidt, G. Dusserre, A. Cantarel and L. Silva. Micro-scale modeling of resin flow by BEM- Permeability computation. International conference on COmputational methods in Manufacturing Processes 2014
[COM19]I. Maillet and L. Michel. High frequency fatigue delamination propagation: A comparison with classical tests. 7th International Conference on Fracture of Polymers, Composites and Adhesives. 2014
[COM20]C. Bouvet, T. Lisle, M.-L. Pastor and P. Marguerès. MESURE PAR THERMOGRAPHIE INFRAROUGE DU TAUX DE RESTITUTION D'ÉNERGIE CRITIQUE DANS UN STRATIFIÉ COMPOSITE: CAS DE LA RUPTURE DE FIBRES EN COMPRESSION. CILSA – Journée Instrumentation, traitement du signal et modélisation des sources acoutisques dans les matériaux composites 2014
[COM21]V. Munoz, M. Perrin, M.-L. Pastor, H. Welemane, A. Cantarel and M. Karama. Identification de mécanismes d’endommagement de stratifiés carbone/époxy par émission acoustique. CILSA - Journées Instrumentation, traitement du signal et modélisation des sources acoustiques dans les matériaux composites 2014
[COM22]I. Maillet and L. Michel. Accelerated delamination propagation tests based on structural resonance. 16th International Conference on Experimental Mechanics 2014
[COM23]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. Measuring volumetric micro-scale displacements of a composite using a PGD-Based DVC. 16th International Conference on Experimental Mechanics, ICEM16 (Cambridge, UK) 2014
[COM24]C. Bouvet, S. Rivallant, J.-J. Barrau, N. Hongkarnjanakul, B. Castanié, H. Abdulhamid, T. Lisle, E. Abi Abdallah, B. Ostre and S. Petit. Discrete ply modelling of impact and compression after impact on composite laminates. Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July 2014
[COM25]S. Daouk, F. Louf, L. Champaney and O. Dorival. Analyse comparative de méthodes stochastiques et non stochastiques d'estimation des incertitudes sur des données simulées et expérimentales. NAFEMS France 2014, Paris, France 2014
[COM26]F. Pascal, O. Dorival, S. Marguet, P. Navarro and J.-F. Ferrero. Semi-continuous approach for the study of impacts on woven composite laminates: modeling interlaminar behaviour with a specific interface element. New modelling strategies of damage and failure of composite structures : a breakthrough in composite sizing ? Toulouse, France 2014
[COM27]S. Daouk, F. Louf, L. Champaney and O. Dorival. Comparative analysis of stochastic and non-stochastic methods for the evaluation of uncertainties in simulated and experimental data. XIXth Symposium Vibrations, SHocks and NOise, VISHNO 2014, Aix-en-Provence, France 2014 [HAL]
[COM28]L.A. Gomes Perini, B. Douchin, P. Marguerès, J.-C. Passieux and J.-N. Périé. On the joint use of an opacifier and digital volume correlation to measure micro-scale volumetric displacement fields in a composite. ICTMS2013 - The 1st International Conference on Tomography of Materials and Structures, (Ghent, Belgium) 2013
[COM29]E. De Luycker, M.-A. Chabcoub, F. Chinesta and D.J. Benson. First Steps in Shape Optimization of Structures Using NURBS with Model Reduction. Advances in Computational Mechanics, ACM, San Diego 2013
[COM30]F. Lachaud, R. Piquet, E. Paroissien and J. Huet. Approche couplée essais-calculs pour l’analyse du comportement des assemblages boulonnés en composites stratifiés. NAFEMS 2013
[COM31]F. Collombet, G. Luyckx, C. Sonnenfeld, Y.-H. Grunevald, N. Lammens, Y. Davila, M. Torres, X. Jacob, K.-T. Wu, B. Douchin, L. Crouzeix, R. Bazer-bachi, T. Geernaert, J. Degrieck and F. Berghmans. Exploiting the temperature insensitivity of the modal birefringence of micro-structured fibre Bragg gratings for cure cycle monitoring. European Workshop on the use of Optical Fibres for monitoring Composites manufacturing process, Toulouse (France), 28-29 nov. 2012
[COM32]L. Robert and G. Dusserre. Isothermal and non-isothermal thermoset cure and induced-strains monitored by optical fibre sensors. European Workshop on the Use of Optical Fibres for the Monitoring of Composites Manufacturing Process, Toulouse, France, novembre 2012
[COM33]C. Espinosa, L. Michel, K. Bodjona, F. Lachaud and R. Piquet. Modélisation numérique de l’initiation et de la propagation des dommages lors du dépliage de cornières composites aéronautiques - Comparaison à des prévisions théoriques. NAFEMS 2012 2012
[COM34]R. Gantois, A. Cantarel, G. Dusserre, J.-N. Felices and F. Schmidt. Mold filling simulation of resin transfer molding combining BEM and level set method . ACMA 2010 - International symposium on composites and aircraft materials 2012
[COM35]T. Cutard, G. Thévenin, O. Barrau and F. Nazaret. New coatings for SPF tools made of a metallic fibre reinforced refractory castable. ICSAM2012, International Conference on Superplasticity of Advanced Materials ICSAM 2003, Albi (France) 2012
[COM36]G. Dusserre and T. Cutard. Comportement non-linéaire de bétons réfractaires renforcés de fibres.. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012. 2012
[COM37]E. Bessard, O. De Almeida and G. Bernhart. Processing Parameter Optimisation of C/PEEK Composites using Fast Thermo-Compression Technology. Russian-French Symposium on Composite Materials, 10-13 july – Saint-Petersbourg – Russia 2012
[COM38]I. Maillet, L. Michel, M. Fressinet, G. Michon and Y. Gourinat. Mise en place d’un essai de détermination de seuil de propagation en fatigue du délaminage de mode I basé sur la résonance d’une éprouvette en matériau composite unidirectionnel. Journées Annuelles de la Société Française de Métallurgie et de Matériaux (SF2M), Nancy 2011
[COM39]C. Bouvet, S. Rivallant and J.-J. Barrau. Low velocity impact modelling in laminate composites and permanent indentation. Workshop ICA-ONR « dynamic failure of composite and sandwich structure », Toulouse, France, 23-24 June 2011
[COM40]F. Lachaud, C. Espinosa, L. Michel and M. Salaün. Impacts on fuselages: a trial in using numerical simulation to predict residual strength. Workshop on "Dynamic Failure of Composite and Sandwich Structures", 23-24 June 2011, ICA, Toulouse (FR) 2011
[COM41]N. Donval, T. Cutard, F. Nazaret and N. Schmitt. Comportement mécanique de bétons réfractaires fibrés.. JNC 17 – 17èmes Journées Nationales des Composites, Poitiers, Juin, 2011. 2011
[COM42]C. Michel, T. Cutard, C. His and T. Champion. Microstructure et comportement mécanique à haute température de réfractaires à base de SiC et à liaison nitrure. Matériaux 2010 , Nantes, FRANCE , 18-22 octobre 2010 2010
[COM43]A. Mazzoni, F. Nazaret and T. Cutard. Comportement thermomécanique de bétons réfractaires renforcés de fibres. Matériaux 2010 , Nantes, FRANCE , 18-22 octobre 2010 2010
[COM44]T. Kagnaya, L. Lambert, C. Boher, T. Cutard, M. Lazard and L. Velnom. Endommagement du WC-Co en usinage. Matériaux 2010 , Nantes, FRANCE , 18-22 octobre 2010 2010
[COM45]T. Kagnaya, C. Boher, L. Lambert, M. Lazard and T. Cutard. Mécanismes d’endommagement du WC-6%Co en usinage.. JIFT 2010 – Journées Internationales Francophones de Tribologie, Albi, Mai, 2010. 2010
[COM46]A. Mazzoni, G. Bernhart and T. Cutard. Ceramic Fibre Reinforced Refractory Castables for Very High Temperature Superplastic forming. EuroSPF2010, 8th European Conference on Superplastic Forming, San Sebastian (Spain) 2010
[COM47]M. Bordival, Y. Le Maoult and F. Schmidt. Thickness Optimisation of Inflated Preforms by Varying Infrared Heatong Coefficients. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM48]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates”. 3ème congrès Rotomoulage, Thermoformage et Soufflage 2009
[COM49]C. Garnier, S. Mistou, J.-N. Felices, P. Hermel and O. Pantalé. Methodology to predict process and materials parameters on the impact response of composites structures. Les 16èmes Journées Nationales sur les Composites- Toulouse 2009
[COM50]Y. Ledru, R. Piquet, F. Schmidt, L. Michel and G. Bernhart. Voids growth mechanisms during manufacturing of aeronautical composite laminates. First Japanese-French Joint Workhop (EMAC-Tohoku University-INSA) 2008
[COM51]G. Bernhart, L. Robert and J.-J. Orteu. Mesures in-situ dans les matériaux et procédés composites à partir de Fibres Optiques à Réseau de Bragg. Colloque AquiQuebec'08, Bordeaux (France), 21-23 juillet 2008 2008
[COM52]L. Robert, N. Decultot, V. Velay, S. Ramde and G. Bernhart. Behaviour identification of aluminium sheet used in Single Point Incremental Forming by Finite Element Method Updated. Photomechanics 2008, Loughborough, UK 2008
[COM53]L. Crouzeix, J.-N. Périé, S. Roux and F. Hild. On the use of displacement fields for identifying material heterogeneities and non linear behaviors. Journée Scientifique et Technique Européenne JST-e -Journée Scientifique et Technique Européenne :Apports des techniques de mesure de champs et des méthodes inverses d’identification en mécani 2008
[COM54]S. Chevalier, J.-N. Felices and W. Rubio. Génération de surfaces enveloppes pour l'usinage de pièces en Bois avec des outils de forme. XIV Colloque National de la Recherche en IUT à Villeurbanne, 2008
[COM55]G. Bernhart, T. Cutard, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Infra-red sheet heating assisted Superplastic Forming.. EuroSPF2008, 7th European Conference on Superplastic Forming, Carcassone (France) 2008 2008
[COM56]F. Nazaret and T. Cutard. Modélisation de l’endommagement dans un béton réfractaire renforcé de fibres métalliques. Journées spécialisées réfractaires du Groupe Français de la Céramique, Lunéville, Septembre (2008) 2008
[COM57]A. Mazzoni and T. Cutard. Comportement thermomécanique de bétons réfractaires : effet du renforcement par des fibres minérales.. Journées spécialisées réfractaires du Groupe Français de la Céramique, Lunéville, Septembre (2008) 2008
[COM58]F. Collombet, Y.-H. Grunevald, M. Mulle, T. Chauvin, S. Casal and B. Douchin. Multi instrumented technological evaluators, new tools to develop innovative embedded instrumentations and to emphasize interests of technological gaps during design of smart primary composite structures. The Fifth Korea-France Joint Workshop on Composite Materials, Daejeon (Korea) 2007
[COM59]Y.-H. Grunevald, F. Collombet, B. Douchin and J.-L. Gonzalez-velazquez. Techno-economical optimization of non flush fast repairing patches for pipelines usable in severe onshore environments. Bonded Composite Patch Seminar, CEAT Toulouse (France) 2007
[COM60]O. De Almeida, F. Lagattu, L. Chocinski-arnault and J. Brillaud. Etude par corrélation d’images de l’influence des charges élastomère et de talc sur les mécanismes de déformation du polypropylène. DEPOS 21, Lille, France. 2007
[COM61]M. Tata, D. Miroud, S. Lebaili, N. Fouchal, T. Cutard and C. Boher. Etude de la caractérisation des frittés WC-W-Ni infiltrés par Cu-Mn. Colloque "Science et Technologie des Poudres & Poudres et Matériaux Frittés" Ecole des Mines d'Albi, du 23 au 25 mai 2007 2007
[COM62]S. Hmida-mamaar, F. Schmidt, L. Robert, V. Velay and L. Chevalier. Identification du Comportement de Membranes en Polymères par Analyse Inverse au cours du Procédé de Soufflage. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM63]M. Bordival, Y. Le Maoult and F. Schmidt. Optimisation de l’Etape de Chauffage du Procédé de Soufflage de Bouteilles en Plastiques. 2ème congrès Rotomoulage, Thermoformage et Soufflage 2007
[COM64]J. Lopez Torres, P. Marguerès and F. Collombet. Etude de la fabrication d'un coin de malle par rfi. Journée Scientifique de l’ONERA- Journée Scientifique et Technique de l’AMAC "Mise en Forme des Matériaux Composites", Châtillon, France 2006
[COM65]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Desarrollo de un modelo de elementos finitos para análisis del comportamiento mecánico de tubos de material compuesto. IBEROMET IX – IX Congreso iberoamericano de metalurgia y materiales, Habana (Cuba) 2006
[COM66]H. Hernandez-moreno, F. Collombet, B. Douchin, P. Davies and J.-L. Gonzalez-velazquez. Development of instrumented composite cylinders. IMRC2006 - International Materials Research Congress, Cancún Quintana Roo (México) 2006
[COM67]S. Hmida-maamar, F. Schmidt, L. Robert and V. Velay. Parameters Identification using Field Measurements of Polymer Membranes during Bubble Inflation Technique. Photomechanics 2006, Clermont-Ferrand (France), 10-12 July 2006
[COM68]H. Marzagui, T. Cutard, E. Yeugo-fogaing, M. Huger, C. Gault, M. Roosefid, E. Ouedraogo, C. Deteuf and N. Prompt. Comportement thermomécanique de deux bétons réfractaires à partir de 1200°C :caractérisations et liens avec les évolutions microstructurales. congrès Matériaux 2006, Dijon France, 13-17 Novembre 2006. 2006
[COM69]F. Nazaret and T. Cutard. Caractérisation et prédiction de la sensibilité à l’effet d’échelle du béton réfractaire renforcé de fibres métalliques (BRRFM). Congrès Matériaux 2006, Dijon France, 13-17 Novembre 2006. 2006
[COM70]S. Hmida, F. Schmidt, L. Robert, V. Velay and D. Mercier. Modélisation du comportement de membranes en polymères durant le procédé de soufflage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM71]M. Bordival, F. Schmidt and Y. Le Maoult. Optimisation numérique des systèmes de chauffage infrarouge pour le thermoformage et l’injection-soufflage . 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM72]F. Schmidt, C. Champin, Y. Le Maoult and M. Bellet. Modélisation de l’étape de chauffage IR dans les procédés de soufflage et thermoformage. 1er congrès Rotomoulage, Thermoformage et Soufflage 2005
[COM73]E. Yeugo Fogaing, H. Marzagui, M. Huger, C. Gault and T. Cutard. Etude de l'endommagement généré par un premier cycle thermique dans deux bétons réfractaires silico-alumineux. Journées du Groupe Français de la Céramique – Paris - Mars 2005. 2005
[COM74]N. Lebaal, S. Puissant, F. Schmidt and D. Schlaefli. Déterminations des paramètres d’une loi de viscosité pseudoplastique à l’aide de mesures sur une filière d’extrusion . 9ème Journée de la Matière Condensée 2004
[COM75]H. Hernandez-moreno, B. Douchin, F. Collombet, J. Bauw and P. Davies. Influence de la mésostructure sur le comportement mécanique de tubes instrumentés à coeur fabriqués par enroulement filamentaire. Journées Scientifiques et Techniques de l'AMAC : « Dialogue Essai/Calcul dans les Structures Hétérogènes », Blois (France) 2004
[COM76]G. Régnier, X. Bardet, D. Dray, E. Jourdain, F. Schmidt and S. Le Roux. Measurements of the full 3D orientation tensor of an injection molded fiber-filled polymer. Europe-China Symposium on Reinforced Polymers 2004
[COM77]H. Marzagui and T. Cutard. Etude de deux bétons réfractaires : comportement thermomécanique et évolutions microstructurales. Journées Spécialisées Réfractaires du Groupe Français de la Céramique – Orléans - Septembre 2004. 2004
[COM78]F. Nazaret, T. Cutard and G. Bernhart. Comportement thermomécanique d'un béton réfractaire renforcé de fibres métalliques : essais mécaniques, microstructures et simulations numériques. Journées Spécialisées Réfractaires du Groupe Français de la Céramique – Orléans - Septembre 2004. 2004
[COM79]J.-N. Felices, F. Eyma, M. Chaussade and P. Larricq. Side milling of swept surface on wood machining – Cutting conditions and tool path generation. COST E35 2nd Workshop Cluny 2004
[COM80]T. Cutard, P. Lours and G. Bernhart. Mechanical Properties of SPF-tooling Materials. Second European Conference on the Superplastic Forming Process (EuroSPF02) – Bristol (Angleterre) – Juin 2002. 2002
[COM81]S. Monteix, Y. Le Maoult, F. Schmidt and J.-P. Arcens. Thermographie Infrarouge Appliquée à la Mise en Forme des Bouteilles en P.E.T. Thermogram 2001 2001
[COM82]F. Deschaux-beaume, C. Colin, S. Le Roux and T. Cutard. Oxydation d’un composite Si3N4-TiN : expériences et modélisation. Les Embiez - Paris (France) – Juin 2001. 2001
[COM83]B. Douchin and P. Ladevèze. Computational aspects of a damage mesomodelling for laminates. Euromech 417 - Numerical Modelling in Damage Mechanics, Troyes (France) 2000
[COM84]F. Deschaux-beaume, C. Colin, S. Le Roux and T. Cutard. Oxydation d’un composite Si3N4-TiN : expériences et modélisation. Journées d’Automne de la Société Française de Métallurgie et de Matériaux - Paris – Oct. 2000. 2000
[COM85]T. Cutard, E. Cailleux and G. Bernhart. Comportements thermomécaniques de bétons réfractaires renforcés par des fibres métalliques. Journées Réfractaires du Groupe Français de la Céramique - Paris (France) – Juillet 2000. 2000
[COM86]T. Cutard, P. Lours and G. Bernhart. New developments on metallic and ceramic toolings for the superplastic forming of titanium alloys. Journées du Groupe Anglais de Superplasticité - Farnborough (UK) – Juin 2000. 2000
[COM87]S. Monteix, F. Schmidt, Y. Le Maoult and J.-P. Arcens. Modélisation du chauffage infra rouge de préformes en PET. IVème Colloque Franco-québécois, École Polytechnique de Montréal 1999
[COM88]T. Cutard, E. Cailleux and G. Bernhart. Comportements thermomécaniques de bétons réfractaires. Renforcement par fibres métalliques pour des applications dans le domaine de la mise en forme. Colloque sur Les Propriétés d'Usage des Réfractaires - Nancy (France) - Juin 1999. 1999
[COM89]N. Feraud, F. Schmidt and C. Levaillant. 3D Simulation of Gob Transfer in the Delivery System on a Glass Bottle Production Machine. International User’s Conference of Abaqus 1996
[COM90]R. Schaeublin, R. Cao, T. Cutard and A. Lakki. Mechanical Properties of High Temperature Materials. Electron Microscopy 1994 – Paris - Juillet 1994. 1994
[COM91]F. Schmidt, J.-F. Agassant, M. Bellet and L. Desoutter. Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.. Colloque National GFP 1992
[COM92]F. Schmidt, J.-F. Agassant, M. Bellet and G. Denis. Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T.. Colloque National Matériaux: Science et industrie 1992

Communication par poster dans un congrès international ou national

[AFF1]M. Aufray, E. Paroissien, J.-B. Sauvage, D. Poquillon and F. Lachaud. Modélisation expérimentale et numérique de l'essai de flexion 3 points. 2017
[AFF2]J.-E. Chambe, C. Bouvet, J.-F. Ferrero and O. Dorival. Energy dissipation during tubular structures crash for aircraft seats development. JNC 20 : Journées Nationales sur les Composites 2017 2017
[AFF3]L. Zemni, G. Dusserre, G. Bernhart and B. Boniface. Etude cinétique de la réticulation d’une résine Cyanate Ester. JNC20 (Journée Nationales sur les Composites 2017) 2017
[AFF4]M. Broutelle, F. Lachaud, C. Dupleix-couderc and A. Daidié. Endommagements des assemblages boulonnés en composite à matrice céramique oxyde/oxyde. Journée des thèses 2016 IRT Saint-Exupéry 2016
[AFF5]J. Serra, C. Bouvet, B. Castanié and C. Petiot. Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge . Journées Nationales sur les Composites 2015
[AFF6]M. Ramanakoto, A.H. Rajemison , F. Eyma and T. Ramananantoandro. Exploration des relations entre entre la préférence visuelle des consommateurs et la qualité de surface des bois usinés. 2èmes Journées Scientifiques du GDR 3544 Sciences du bois, Paris, France 2013
[AFF7]F. Patrulescu, E. De Luycker, F. Chinesta, A. Huerta and A. Ammar. Toward shape optimization using PGD with geometrical parameters in an Isogeometrical Framework. 2nd International Worksho on Reduced Basis, POD and PGD model, Blois 2013
[AFF8]L. Barrière, J.-C. Passieux, S. Marguet, B. Castanié and P. Cresta. Adaptive Model Reduction for Local Post-Buckling Analysis. 2nd International Workshop on Reduced Basis, POD and PGD model (Blois, Fr) 2013
[AFF9]A. Cerisier, F. Collombet, L. Crouzeix and Y.-H. Grunevald. Vers une méthodologie robuste pour la réparation de pièces composites primaires aéronautiques. JNC 18, Nantes 2013
[AFF10]T. Ramananantoandro, M. Ramanakoto, H.A. Rajemison and F. Eyma. Exploring relationship between surface quality and visual preference of consumers – establishment of acceptability thresholds. 67th FPS and 56th SWST International Conventions, Austin, Texas 2013
[AFF11]J.-C. Passieux, P. Navarro, S. Marguet, J.-F. Ferrero and J.-N. Périé. Medium velocity impact force gauging by digital image correlation. International conference on full-field measurement techniques and their applications in experimental solid mechanics, Photomechanics (Montpellier, Fr) 2013
[AFF12]C. Sonnenfeld, G. Luyckx, F. Collombet, Y.-H. Grunevald, B. Douchin, L. Crouzeix, M. Torres, S. Sulejmani, T. Geernaert, K. Chah, P. Mergo, H. Thienpont and F. Berghmans. Integration of microstructured optical fibres into carbon fibre reinforced plastic materials - determination of the initial strain state. CompTest 2013 - 6th International Conference on Composites Testing and Model Identification, Aalborg (Denmark), 22-24 April 2013
[AFF13]B. Reine, J. Di-tomaso, G. Dusserre and P. Olivier. Study of Thermal Behaviour of Thermoset Polymer Matrix Filled with Micro and Nanoparticles. COMSOL Conference Milan 2012 2012
[AFF14]J. Bouillonnec, M. Pinault, M. Mayne-l Hermite, G. Bernhart, P. Olivier and M. Gardou. Composite materials prepared from vertically aligned carbon nanotubes: elaboration and properties. ChemOnTubes 2012 (Arcachon) 2012
[AFF15]E. Bessard, O. De Almeida and G. Bernhart. Manufacturing of structural thermoplastic composites with fast compression moulding process . SAMPE Europe, Paris, France 2012
[AFF16]G. Bernhart, G. Peraudeau, M. Balat-pichelin and T. Cutard. Étude du comportement à très haute température de bétons réfractaires à base de SiC pour application en environnement de propulsion hybride. Journées spécialisées « Céramiques réfractaires », Mons (Belgique), 2012. 2012
[AFF17]A. Farrugia, G. Dusserre, T. Cutard and M. Rollin. Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system . ECCM 15 - 15th European Conference on Composite Materials, Venice (Italy) 2012
[AFF18]J. Aubry, P. Navarro, S. Marguet, I. Tawk, J.-F. Ferrero, S. Lemaire and P. Rauch. Etude numérique de l’influence de la vitesse d’impact sur la résistance des pales d’hélicoptères à des impacts rasants. 17èmes Journées Nationales sur les Composites (JNC 17) 2011
[AFF19]A. Shahdin, L. Mezeix, J. Morlier, Y. Gourinat and C. Bouvet. Diagnosis of the Fabrication Process of Sandwich Structures with Fiber Network Core with the help of Vibration Testing. 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London 2009
[AFF20]N. Donval, A. Mazzoni and T. Cutard. Development and thermomechanical behavior of fiber reinforced refractory concretes.. apanese-French Joint Workhop (EMAC-Tohoku University-INSA), Tohoku University (Japan), December 2009. 2009
[AFF21]A. Mazzoni and T. Cutard. Thermomechanical study of reinforced mineral fibre refractory concretes. First Japanese-French Joint Workhop (EMAC-Tohoku University-INSA), Albi (France), December 2008. 2008
[AFF22]C. Rogueda-berriet, L. Lesellier, N. Bahlouli, D. Pessey, O. De Almeida, L. Chocinski-arnault, F. Lagattu, C. Gauthier, J.M. Pelletier, C. Raveyre and J. Guillet. Influence de polluants sur les propriétés mécaniques de PP-chocs issus du recyclage des véhicules hors d’usage. DEPOS 21, Lille, France. 2007
[AFF23]J. Lopez Torres, P. Marguerès and F. Collombet. Study for manufacturng a corner fitting obtained by resin film infusion process.. ECCM12-15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Biarritz, France 2006
[AFF24]O. De Almeida, L. Chocinski-arnault, F. Lagattu and J. Brillaud. Influence de la pollution et du recyclage sur les caractéristiques physiques et mécaniques d’un polypropylène-choc utilisé dans l’industrie automobile. DEPOS 20, Obernai, France. 2006
[AFF25]F. Lagattu, L. Chocinski-arnault, O. De Almeida, N. Bahlouli, D. Pessey, C. Berriet, C. Gauthier, J.M. Pelletier and J. Guillet. Etude des propriétés des PP-chocs issus du recyclage des Véhicules Hors d’Usage. DEPOS 20, Obernai, France. 2006
[AFF26]F. Nazaret, T. Cutard and G. Bernhart. Influence des fibres métalliques dans le comportement mécanique à haute température d'un béton réfractaire renforcé. MECAMAT – Aussois (France) - Janvier 2004. 2004
[AFF27]T. Branza, G. Bernhart, P. Lours, F. Deschaux Beaume, V. Richefeu, A. Duchosal and G. Fras. Rechargement TIG d’outillages de formage superplastique: essais et simulation . Actes du Colloque National MECAMAT, Ecole de Mécanique des Matériaux : « Assemblages : des Matériaux à la Structure » Ed. V. Aubin, S. Degallaix, Y. Desplanques, MC. Tan 2003
[AFF28]P. Lours, K. Bavard, H.V. Bui and G. Bernhart. Influence of casting defects on the fatigue behaviour of martensitic tool steel . 4th International Conference on Mechanics and Materials in Design Nagoya, Japon, June 2002 2002
[AFF29]S. Baleix, G. Bernhart, E. Cailleux, T. Cutard and P. Lours. Matériaux réfractaires pour outillages de formage superplastique . Actes du Colloque Matériaux Réfractaires de la SF2M Section sud-est, Cavaillon (France), 13-14 janvier, 1999 1999
[AFF30]T. Cutard, F. Deschaux-beaume, C. Colin, F. Schmidt and C. Levaillant. Développement d'outillages à base de matériaux céramiques pour la mise en forme de métaux à haute température. Colloque sur Les Propriétés d'Usage des Réfractaires - Nancy (France) - Juin 1999. 1999
[AFF31]E. Cailleux, P. Lours, T. Cutard and G. Bernhart. Structural and mechanical properties of a refractory concrete for superplastic forming tools. CIMTEC'98-World Ceramics Congress & Forum on New Materials–Florence (Italie) - Juin 1998. 1998
[AFF32]P. Lours, J. Alexis and G. Bernhart. High temperature oxidation behaviour and creep properties of ODS alloy PM2000 . Proceedings of the 14th International Plansee Seminar, edited by G. Kneringer, P. Rödhammer & P. Wilhartitz, Reutte (Austria), 1, 869, 1997 1997

Ouvrage scientifique

[OS1]C. Bouvet. Mécanique des solides, des matériaux et des structures aéronautiques. Ed. ISTE 304p. 2017 ISBN:978-1-78405-282-9
[OS2]C. Bouvet. Mechanics of Aeronautical Composite Materials. Ed. Wiley-ISTE 318p. 2017 ISBN:978-1-78630-114-7
[OS3]C. Bouvet. Mechanics of aeronautical solids, materials and structures. Ed. Wiley-ISTE 304p. 2017 ISBN:978-1-78630-115-4
[OS4]F. Berthet. Les composites voie liquide : RTM et LRI. Ed. Presses des mines 2017 ISBN:9782356714572
[OS5]K. Vijayan, R. Zitoune and J.P. Davim. Drilling of polymer matrix composites. Ed. Springer (http://www.springer.com/engineering/production+engineering/book/978-3-642-38344-1) 120p. 2014 ISBN:978-3-642-38345-8

Chapitre d'ouvrage scientifique

[OSC1]F. Pascal, P. Navarro, S. Marguet and J.-F. Ferrero. Study of medium velocity impacts on the lower surface of helicopter blades. In book Dynamic Response and Failure of Composite Materials and Structures, Chap. 5, p.159-180. Ed. Woodhead Publishing. 2017 ISBN:978-0-08-100887-4
[OSC2]F. Schmidt and Y. Le Maoult. Infrared Radiation Applied to Polymer Processes . In book Heat Transfer in Polymer Composite Materials: Forming Processes, Chap. 13, p.385. Ed. Wiley-ISTE. 2016 ISBN:978-1-84821-761-4
[OSC3]C. Bouvet. Tolérance aux dommages d’impact des structures composites aéronautiques. In book Techniques de l'Ingénieur, p.article TRP4042. Ed. Techniques de l'Ingénieur. 2016
[OSC4]R. Zitoune and H. Bouguerara. Machining and drilling processes in composites manufacture: Damage and material integrity. In book Advances in Composites Manufacturing and Process Design, Chap. 9, p.177-195. Ed. Elsevier. 2015 ISBN:978-1-78242-307-2 [DOI]
[OSC5]F. Collombet, Y.-H. Grunevald, L. Crouzeix, B. Douchin, R. Zitoune, Y. Davila, A. Cerisier and R. Thévenin. Repairing composites. In book Advances in Composites Manufacturing and Process Design, Chap. 10, p.197-227. Ed. © 2015 Elsevier Ltd. 2015 ISBN:978-1-78242-307-2 [DOI]
[OSC6]G. Dusserre and G. Bernhart. Knitting processes for composites manufacture . In book advances in composites manufacturing and process design, Chap. 2, p.27-53. Ed. . 2015 ISBN:978-1-78242-307-2
[OSC7]C. Bouvet, N. Hongkarnjanakul, S. Rivallant and J.-J. Barrau. Discrete Impact Modeling of Inter- and Intra-laminar Failure in Composites. In book Dynamic Failure of Composite and Sandwich Structures, Chap. 8, p.339-392. Ed. Springer. 2013 ISBN:978-94-007-5328-0
[OSC8]M. Haddad, R. Zitoune, F. Eyma and B. Castanié. Influence of Tool Geometry and Machining Parameters on the Surface Quality and the Effect of Surface Quality on Compressive Strength of Carbon Fibre Reinforced Plastic . In book Materials Science Forum - Vol 763, p.107-125. Ed. Trans Tech Publications, Switzerland. 2013 ISBN:doi:10.4028/www.scientific.net/MSF.763.107
[OSC9]J. Aubry, P. Navarro, I. Tawk, S. Marguet, J.-F. Ferrero, S. Lemaire and P. Rauch. Experimental and Numerical Study of Normal and Oblique Impacts on Helicopter Blades. In book Dynamic Failure of Composite and Sandwich Structures, p.545-575. Ed. Springer Netherlands. 2013 ISBN:978-94-007-5329-7
[OSC10]E. Paroissien, F. Lachaud and T. Jacobs. A simplified stress analysis of bonded joints using macro elements. In book Advances in modeling and design of adhesively bonded systems, Chap. 4, p.93-146. Ed. MITALL K. L.; KUMAR S.. 2013
[OSC11]S. Rkoloor, A. Abdul-latifj, X. Gong, K. Wong and M.N. Tamin. Evolution Characteristics of Delamination Damage in CFRP Composites Under Transverse Loading. In book Damage and Fracture of Composite Materials and Structures, Advanced Structured Materials, Vol. 17 Pages : . Edition : . ISBN : 978-3-642-23658-7. , p.45-69. Ed. Springer-Verlag Berlin Heidelberg . 2012 ISBN:978-3-642-23658-7
[OSC12]X. Gong, K. Wong and M.N. Tamin. Moisture Absorption Effects on Interlaminar Fracture Toughness of Woven Glass/Epoxy Composite Laminates. In book Damage and Fracture of Composite Materials and Structures, Advanced Structured Materials, Vol. 17, p.107-129. Ed. Springer-Verlag Berlin Heidelberg . 2012 ISBN:978-3-642-23658-7
[OSC13]B. Castanié, Y. Aminanda, J.-J. Barrau and P. Thevenet. 10. Discrete modelling of the crushing of Nomex honeycomb core and application to impact and post impact behavior of sandwich structures. In book Recent avances on dynamic failure of composite and sandwich structures, p.. Ed. . 2012
[OSC14]P. Olivier, M. Mulle, C. Paris and F. Collombet. Carbon/polymeric composites autoclave cure monitoring with optical Fiber Bragg Grating (FBG) sensors. In book Wiley Encyclopedia of Composites, p.230-240. Ed. Edited by L. Nicolais - WILEY Publishing Co June 2012. 2012 ISBN:978-0-470-12828-2
[OSC15]S.A. Brown, L. Tong, X. Gong and Q.T. Luo. Mixed mode energy release rates for composite joints . In book Composites joints and connections: principles, modelling and testing , Chap. 18, p.435-462. Ed. Woodhead Publishing limited. 2011 ISBN:978-1-84569-990-1
[OSC16]F. Chinesta and F. Schmidt. On the Use of Reduced Bases in Optimization of Injection Molding. In book Optimization in Polymer Processing , Chap. 8, p.169-194. Ed. Nova Science Publishers. 2011
[OSC17]R. Zitoune, A. Mir, B. Hachemane, F. Boyer, C. Bouvet, F. Collombet and B. Bezzazi. chapter 5: Static and dynamic behaviours of composite laminate. In book Fiber reinforced composites, Chap. 5, p.. Ed. Nova publishers. 2011
[OSC18]G. Bernhart, P. Lours, T. Cutard, V. Velay and F. Nazaret. Processes and equipments for superplastic forming of metals . In book Superelastic Forming of Advanced Metallic Materials – Methods & Applications, Chap. 3, p.49-71. Ed. Woodhead Publishing in Materials. 2011 ISBN:978-1-84569-753-2 [DOI]
[OSC19]F. Cènac, F. Collombet, M. Deliris and R. Zitoune. Abrasive Water Jet Machining of Composites. In book Machining Composite Materials, Chap. 4, p.167-180. Ed. Hardback. 2009 ISBN:9781848211704
[OSC20]F. Collombet, M. Mulle, H. Hernandez-moreno, R. Zitoune, B. Douchin and Y.-H. Grunevald. Benefit from embedded sensors to study polymeric composite structures. In book Damage and fracture mechanics - failure analysis of engineering materials and structures, p.485-496. Ed. Boukharouba Et Al Editor. 2009 ISBN:978-90-481-2668-2

Ouvrage de vulgarisation (ou chapitre)

[OV1]B. Castanié, C. Bouvet and D. Guedra-degeorges. Structures en Matériaux Composites Stratifiés. Ed. Techniques de l'Ingénieur 2013
[OV2]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesures de champs sur éprouvette technologique instrumentée par réseaux de Bragg : comparaison et validation des mesures. Ed. Essais Industriels N°32 pages 10-16 2005
[OV3]M. Mulle, J.-N. Périé, F. Collombet, L. Robert and Y.-H. Grunevald. Mesure de champs et fibres optiques à réseaux de Bragg. Ed. Photoniques - La Revue de la Société Française d'Optique N°16 p. 39-41 2004

Direction d'ouvrage collectif

[DO1]K. Vijayan, R. Zitoune and J.P. Davim. Special Issue on Advances in the Machining of Aerospace Materials. International Journal of Machining and Machinability of Materials. 18 (1/2) 130p. Ed. Inderscience Publishers. 2016
[DO2]R. Zitoune, R. Serra and F. Laurin. Usinage des matériaux Composites. Revue des composites et des matériaux avancés. 23(3) 130p. Ed. Lavoisier. 2013
[DO3]G. Bernhart. Superplasticity in Advanced Materials - ICSAM 2012. Materials Science Forum. 735, 426p. Ed. Trans tech Publications. 2013 ISBN:978-3-03785-553-9
[DO4]R. Zitoune, K. Vijayan and J.P. Davim. . International Journal of Machining and Machinability of Materials. 13 (2/3) 120p. Ed. Inderscience Publishers. 2013 ISBN:1748-572X
[DO5]R. Zitoune, K. Krishnaraj and J.P. Davim. Developments in Machining of Aerospace Materials. Journal of Machining and Forming Technologies. 4(3/4) 140p. Ed. Nova Publishers : https://www.novapublishers.com/catalog/product_info.php?products_id=37335&osCsid=8. 2012
[DO6]S. Abrate, B. Castanié and Y. Rajapakse. Recent advances in dynamic failure of composite and sandwich structures. , Ed. Springer. 2012 ISBN:978-94-007-5328-0
[DO7]P. Olivier and J. Lamon. Comptes Rendus des 16° Journées Nationales sur les Composites (Toulouse, Juin 2009). Comptes Rendus des JNC - AMAC. , 413p. Ed. Juin 2009. 2009 ISBN:978-2-87717-092-6 [HAL]
[DO8]P. Olivier, P. Marguerès and J.-J. Orteu. Contrôles non destructifs et matériaux composites : journée scientifique AMAC/COFREND. Revue des Composites et des Matériaux Avancés (RCMA). 17(2) Ed. Hermès-Lavoisier. 2007 ISBN:1169-7954
[DO9]G. Bernhart, T. Cutard and P. Lours. Third European Conference on SuperPlastic Forming - Proceedings. CEPADUES-EDITIONS. , Ed. CEPADUES-EDITIONS. 2004 ISBN:2.85428.649.9

Thèse de Doctorat ou HdR

[TH1]R. D'Elia. Comportement thermomécanique et en ablation d'un béton réfractaire à base de SiC pour applications en propulsion hybride. Thèse de doctorat, Université de Toulouse. 2014
[TH2]A.C. Akue Asseko. Modélisation du procédé de soudage laser des composites thermoplastiques. Thèse de doctorat, Mines de Douai et Université de Lille. 2014
[TH3]R. Piquet. Structures composites à matrice organique : procédés d'élaboration et d'usinage. Habilitation à diriger des recherches, Université Paul Sabatier. 2013
[TH4]R. Zitoune. De la fabrication à l'usinage des matériaux composites et des multi-matériaux. Habilitation à diriger des recherches, Université Paul Sabatier. 2012
[TH5]X. Gong. Comportement mécanique et hygrothermique des composites stratifiés : Ruptures interlaminaires et Assemblage collé. Habilitation à diriger des recherches, Université de Bourgogne. 2012
[TH6]F. Lachaud. Contribution à l’analyse multi échelle du comportement mécanique non linéaire matériau des structures composites. Habilitation à diriger des recherches, Université Paul Sabatier. 2011 [OATAO]
[TH7]P. Navarro. Etude de l'impact oblique à haute vitesse sur des structures en sandwich composite : application aux pales d'hélicoptère. Thèse de doctorat, Université de Toulouse. 2010
[TH8]J.-F. Ferrero. Dimensionnement de structures composites. Habilitation à diriger des recherches, Université Paul Sabatier. 2010
[TH9]C. Bouvet. Etude de l'endommagement dans les structures composites. Habilitation à diriger des recherches, Université Paul Sabatier. 2009
[TH10]T. Cutard. Matériaux inorganiques hétérogènes : architectures multi-échelles et comportements thermomécaniques. Habilitation à diriger des recherches, Université de Limoges. 2005
[TH11]F. Schmidt. Modélisation dans les procédés de mise en forme des polymères. Habilitation à diriger des recherches, « Energétique, Génie des Procédés » à l’Université de Pau et des Pays de l’Adour. 2001
[TH12]F. Berthet. Contribution à l'étude de l'influence des paramètres de mise en oeuvre et de constitution sur les propriétés mécaniques de composites carbone/epoxy injectés sur renfort (R.T.M.). Thèse de doctorat, Ecole des mines de Paris. 1998
[TH13]F. Lachaud. Délaminage de matériaux composites à fibres de carbone et à matrices organiques : étude numérique et expérimentale, suivi par émission acoustique . Thèse de doctorat, ISAE (ENSICA). 1997 [OATAO]
[TH14]F. Schmidt. Étude expérimentale et modélisation du procédé d’injection soufflage bi-orientation en cycle froid de bouteilles en P.E.T. Thèse de doctorat, Sciences et Génie des Matériaux à l’école Nationale Supérieure des Mines de Paris. 1995

Autre publication

[AP1]M. Boulanghien, S. Da Silva, F. Berthet, G. Bernhart and Y. Soudais. Using steam thermolysis to recycle carbon fibres from composite waste. JEC Magazine, N°100 Oct 2015,pp68-70 2015

Brevet

[BR1]T. Cutard, F. Nazaret, N. Donval and G. Bernhart. Outillage utilisé pour la mise en oeuvre de composites à matrice organique. Brevet No.10 01451, 2010
[BR2]F. Nazaret, T. Cutard and G. Bernhart. Outillage utilisé lors d'un procédé de formage superplastique. Brevet No.08352011.4-2111, 2008
[BR3]L. Mézeix, C. Bouvet, D. Poquillon, V. Fascio, P. Vié and J.-L. Brian. Matériau d’âme à base de fibres enchevêtrées et billes. Brevet No.FR 2 939 077-A1, 2008



INSTITUT CLEMENT ADER, 3, rue Caroline Aigle F-31400 Toulouse, France.
Livraisons : +33 (0)5 61 17 10 07
Secrétariat ICA: +33 (0)5 61 17 10 85 ou +33 (0)5 61 17 10 82
Fax : +33 (0)5 61 17 10 80