Anna Carla Araujo

Maître de conférence - Institut National des Sciences Appliquées de Toulouse (INSA de Toulouse)
Membre du groupe Surfaces, Usinages, Matériaux et Outillages (SUMO)
BR2-0039, Espace Clément Ader, 3 rue Caroline Aigle
31400 Toulouse
  araujo@insa-toulouse.fr
Activités de recherche :

The area of research focuses on manufacturing processes, especially in the process of machining (metal cutting) and, recently, additive manufacturing. The mechanical behavior of the machining and micro-cutting cutting tool is modeled and experimental monitoring of cutting forces, wear, tool life, machinability and other process factors is performed. The workpiece materials of interest are: aerospace and petroleum industry materials and biocompatible materials for medical implants (Titanium, Aluminum, Chrome-Cobalt alloys and aeronautic composites).

Articles in International and Local Conferences: http://lattes.cnpq.br/4198469560134761



Activités d'enseignement :

She taught the following disciplines in undergraduate and graduate courses: manufacturing processes, machining (theory and practice), additive manufacturing and design of experiments (DOE).

Her academic education took place in the Mechanical Engineering of UFRJ (Graduation, Master and Doctorate) with doctorate Sandwich at UIUC (University of Illinois at Urbana Champaign).

She worked for three years in the steel industry managing the small team of manufacturing, assembly and installation of continuous casting flow equipment in Brazilian and South American companies of the steel industry after the doctorate and before rejoining the academic life.

Before coming to France, she was a Professor at the Department of Mechanical Engineering at CEFET/RJ (2006-2010) and at UFRJ (2010-2019). At UFRJ she was director of International Relations at the Polytechnic School (2014-2017) and she also worked leading the Brafitec Project with Paristech Schools. She held a postdoctoral position for one year (2017-2018) at ENSAM Paristech in the LaBoMaP laboratory integrated in the Saint Jean Industries industry in Cluny, France.



Autre :

Articles in International Journals and Local Journals:

  1. CAMPOS, FÁBIO O. ; ARAUJO, ANNA CARLA MONTEIRO ; KAPOOR, SHIV G . Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V. Journal of Micro and Nano-Manufacturing, v. 7, p. 6, 2019.
  2. FONSECA COELHO, ARTHUR WILSON ; DA SILVA MOREIRA THIRÉ, ROSSANA MARA ; Araujo, Anna Carla . Manufacturing of gypsum-sisal fiber composites using Binder Jetting. Additive Manufacturing, v. 29, p. 10, 2019.
  3. MOUGO, A. L. ; CAMPOS, F.C. ; ARAUJO, A. C. . Mechanistic study on micromilling of the super duplex stainless steel UNS S32750. Journal of Manufacturing Processes, v. 34, p. 31-39, 2018.
  4. OLIVEIRA, G. P. ; Fonseca, M.P.C. ; ARAUJO, A. C. . Residual stresses and cutting forces in cryogenic milling of Inconel 718. PROCEDIA CIRP, v. 77, p. 211-214, 2018.
  5. ARAUJO, A. C.; Fromentin, G. . Investigation of tool deflection during milling of thread in Cr-Co dental implant. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 99, p. 531-541, 2018.
  6. COELHO, A. W. F. ; THIRE, R. M. S. M. ; ARAUJO, A. C. . Manufatura aditiva por estereolitografia: análise da peça e da influência da posição e orientação de fabricação. Materia-Rio de Janeiro, v. 23, p. 1-1, 2018.
  7. DE PAULA OLIVEIRA, GLEITON ; CINDRA FONSECA, MARIA ; Araujo, Anna Carla . Analysis of residual stress and cutting force in end milling of Inconel 718 using conventional flood cooling and minimum quantity lubrication. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 90, p. 1-8, 2017.
  8. Araujo, A. C.; Fromentin, G. . Modeling Thread Milling Forces in Mini-hole in Dental Metallic Materials. PROCEDIA CIRP, v. 58, p. 623-628, 2017.
  9. CABRERA, G. A. ; Araujo, A. C. ; Castello, D. A. . On the wavelet analysis of cutting forces for chatter identification in milling. Advances in Manufacturing, p. 1-13, 2017.
  10. CAMPOS, FÁBIO DE OLIVEIRA ; SCHRODER, FERNANDA DE CASTRO MONTE ; Araujo, Anna Carla ; BLAS, JUAN GARCIA DE ; PEREIRA, LUIZ CARLOS . Cutting Forces and Mechanical Resistance of Pure Titanium Processed by Equal Channel Angular Pressing. Procedia CIRP, v. 46, p. 222-225, 2016.
  11. CAMPOS, F. O. ; MOUGO, A. L. ; Araujo, A. C. . Study of the cutting forces on micromilling of an aluminum alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering (Impresso), v. 1, p. 1-8, 2016.
  12. WANG, Z. ; KOVVURI, V. ; ARAUJO, A. ; BACCI, M. ; HUNG, W.N.P. ; BUKKAPATNAM, S.T.S. . Built-up-edge effects on surface deterioration in micromilling processes. Journal of Manufacturing Processes, v. 472, p. 1-7, 2016.
  13. Araujo, A. C.; MELLO, G. M. ; GRIPPA, F.S. . Thread milling as a manufacturing process for API threaded connection: geometrical and cutting force analysis. Journal of Manufacturing Processes, v. 18, p. 75-83, 2015.
  14. MOUGO, A. L. ; CAMPOS, F. O. ; Araujo, A. C. . Estudo da Influência da Largura de Corte no MicroFresamento de uma Liga de Alumínio. Maquinas e Metais, v. 598, p. 50-62, 2015.
  15. GRIPPA, F.S. ; Araujo, A. C. . Análise de Forças no Fresamento de Roscas API. Maquinas e Metais, v. 582, p. 18-31, 2014.
  16. NERY, W.S. ; Vogel, J.P. ; OLIVEIRA, J.E.F. ; Araujo, A. C. . Avaliação Experimental do processo parametrizado por otimização computacional. Maquinas e Metais, v. 584, p. 60, 2014.
  17. Araujo, A. C.; Fromentin, G. ; POULACHON, G. . Analytical and experimental investigations on thread milling forces. International Journal of Machine Tools & Manufacture, v. 67, p. 28-34, 2013.
  18. SILVA, F. V. P. ; Vogel, J.P. ; GOMES, R. M. ; MELO, T. A. A. ; Araujo, A. C. ; BARROS, S. . Effect of the Cutting Velocity and Heat Treatment on Turning Cutting Forces of an SMA Cu-Al-Be Alloys. Materials Science Forum, v. 758, p. 157, 2013.
  19. Araujo, A. C.; SAVI, M. A. ; PACHECO, P. M. L. C. . Dynamics of 2-DOF Micro-End-Milling System Considering Grain-Size Variation. Materials Science Forum, v. 758, p. 165, 2013.
  20. Vasconcellos, M. N. ; Araujo, A. C. . Análise das forças de corte no processo de furação de uma liga de aço inoxidável austenítico. Maquinas e Metais, v. 559, p. 12, 2012.
  21. Santos, J. A. C. ; Rebêlo, L. M. ; Araujo, A. C. ; Barros, E. B. ; de Sousa, J. S. . Thickness-corrected model for nanoindentation of thin films with conical indenters. Soft Matter, v. 8, p. 4441-4448, 2012.
  22. FROMENTIN, GUILLAUME ; Araujo, Anna Carla ; POULACHON, GÉRARD ; PAIRE, YANN . Modélisation géometrique du filetage à la fraise. Mécanique & Industries, v. 12, p. 469-477, 2011.
  23. JUN, M ; ARAUJO, A. C. . Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling. Journal of Manufacturing Science and Engineering, v. 132, p. 1-6, 2010.
  24. Fonseca, M.P.C. ; Barbosa, M.F.M. ; Bartholo, R.N. ; Marques, A. ; Pardal, J.M. ; ARAUJO, A. C. . Tensões Residuais no Fresamento de Amostras de Aço Superduplex. Máquinas e Metais, v. 535, p. 46-61, 2010.
  25. ARAUJO, A. C.; SILVEIRA, J. L. . Emissão Acústica usada na modelagem do fresamento de topo. Máquinas e Metais, v. 519, p. 36-51, 2009.
  26. ARAUJO, A. C.; Friedrich, E. B. ; Dias, L.M.M.D . ESTUDO SOBRE O DESEMPENHO DE FERRAMENTAS REVESTIDAS NO TORNEAMENTO DE FERRO FUNDIDO. E.T.C. Educação, Tecnologia e Cultura, v. 13, p. 66-74, 2008.
  27. ARAUJO, A. C.; JUN, M ; KAPOOR, S G ; DEVOR, R . Experimental Investigation of a Combined Drilling and Thread Milling Process: Thrilling. Transactions of NAMRI/SME, v. 35, p. 513-520, 2007.
  28. ARAUJO, A. C.; SILVEIRA, J L ; KAPOOR, S G ; JUN, M ; DEVOR, R . A model for thread milling cutting forces. International Journal of Machine Tools & Manufacture, ELSEVIER, v. 46, n.11, p. 1170-1170, 2006.
  29. ARAUJO, A. C.; KAPOOR, S G ; SILVEIRA, J. L. . Force Prediction in Thread Milling. Revista Brasileira de Ciências Mecânicas, Rio de Janeiro, v. xxvi, n.1, p. 82-88, 2004.

Articles in International and Local Conferences: http://lattes.cnpq.br/4198469560134761



Production scientifique :
3 contributions trouvées

AnnéeTypeAuteurs et titre du documentLiens
2019ACLFábio de Oliveira Campos, Anna Carla Araujo, Shiv Gopal Kapoor. Experimental Comparison of Micromilling Pure Titanium and Ti-6Al-4V. Journal of Micro and Nano-Manufacturing, ASME, 7(2)[HAL] / [BIB] / [DOI]
2018ACLAnna Carla Araujo, Guillaume Fromentin. Investigation of tool deflection during milling of thread in Cr-Co dental implant. Science Arts & Métiers (SAM). International Journal of Advanced Manufacturing Technology, Springer Verlag, 99(1-4), p.531-541[HAL] / [BIB] / [DOI]
2017COMAnna Carla Araujo, Guillaume Fromentin. Modeling Thread Milling Forces in Mini-hole in Dental Metallic Materials. 16th CIRP Conference on Modelling of Machining Operations, 58, p.623-628, Cluny, FR[HAL] / [BIB] / [DOI]